I know that there are other questions on this topic but I still can't find the solution to the problem.
I'm trying to read a .csv file in C using the fscanf() function.
If I open the csv file with a text editor it looks like this:
578,2.2212e+05,223,0,243,0,0,0.09,0,0,0,3
633,2.2222e+05,223,0,243,0,0,-0.04,0,0,0,3
688,2.2232e+05,223,0,243,0,0,0.07,0,0,0,3
740,2.2242e+05,223,0,243,0,0,0.04,0,0,0,3
793,2.2252e+05,224,0,244,0,0.01,0.16,0,0,0,3
848,2.2262e+05,223,0,717,0.060985,0.02,0.08,0,0,0,4
902,2.2272e+05,223,0,721,0.084618,0.03,0.24,0,0,0,5
955,2.2282e+05,223,0,730,0.12825,0.05,0.34,0,0,0,4
I just reported the first few rows but it contains a lot more.
Then I used this code to read the file:
FILE* stream = fopen("./filelog.csv", "r");
if(stream == NULL) {
printf("\n file opening failed ");
return -1 ;
}
int values[8];
int count;
for(count = 0; count < 8; count++) {
int u = fscanf(stream, "%i", &values[count]);
printf("%i\n", values[count]);
}
The output I get is the following:
578
32697
0
0
1
0
4199901
0
We can see that only the first value is read correctly. How could I read the whole file and store it into a matrix? I can't find any solution anywhere.
Thank you so much for your replies in advance!
Your format string %i parses a single integer, but the next thing after the integer is a comma, and you're not parsing that. You should always check the return value, to make sure parsing succeeded, before using the value(s).
You need a format string that matches the actual content of the file, something like:
if (fscanf(stream, " %d,%f,%d,%d,%d,%d,%d,%f,%d,%d,%d,%d", ...) == 12)
{
}
in the code above the ... means "put pointers to 12 variables of the proper types, here". The space at the front of the format string is intended to help "consume" whitespace (like linefeeds) in the stream.
Related
Today I decided to learn to code for the first time in my life. I decided to learn C. I have created a small program that checks a txt file for a specific value. If it finds that value then it will tell you that that specific value has been found.
What I would like to do is that I can put multiple files go through this program. I want this program to be able to scan all files in a folder for a specific string and display what files contain that string (basically a file index)
I just started today and I'm 15 years old so I don't know if my assumptions are correct on how this can be done and I'm sorry if it may sound stupid but I have been thinking of maybe creating a thread for every directory I put into this program and each thread individually runs that code on the single file and then it displays all the directories in which the string can be found.
I have been looking into threading but I don't quite understand it. Here's the working code for one file at a time. Does anyone know how to make this work as I want it?
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main()
{
//searches for this string in a txt file
char searchforthis[200];
//file name to display at output
char ch, file_name[200];
FILE *fp;
//Asks for full directory of txt file (example: C:\users\...) and reads that file.
//fp is content of file
printf("Enter name of a file you wish to check:\n");
gets(file_name);
fp = fopen(file_name, "r"); // read mode
//If there's no data inside the file it displays following error message
if (fp == NULL)
{
perror("Error while opening the file.\n");
exit(EXIT_FAILURE);
}
//asks for string (what has to be searched)
printf("Enter what you want to search: \n");
scanf("%s", searchforthis);
char* p;
// Find first occurrence of searchforthis in fp
p = strstr(searchforthis, fp);
// Prints the result
if (p) {
printf("This Value was found in following file:\n%s", file_name);
} else
printf("This Value has not been found.\n");
fclose(fp);
return 0;
}
This line,
p = strstr(searchforthis, fp);
is wrong. strstr() is defined as, char *strstr(const char *haystack, const char *needle), no file pointers in it.
Forget about gets(), its prone to overflow, reference, Why is the gets function so dangerous that it should not be used?.
Your scanf("%s",...) is equally dangerous to using gets() as you don't limit the character to be read. Instead, you could re-format it as,
scanf("%199s", searchforthis); /* 199 characters + \0 to mark the end of the string */
Also check the return value of scanf() , in case an input error occurs, final code should look like this,
if (scanf("%199s", searchforthis) != 1)
{
exit(EXIT_FAILURE);
}
It is even better, if you use fgets() for this, though keep in mind that fgets() will also save the newline character in the buffer, you are going to have to strip it manually.
To actually perform checks on the file, you have to read the file line by line, by using a function like, fgets() or fscanf(), or POSIX getline() and then use strstr() on each line to determine if you have a match or not, something like this should work,
char *p;
char buff[500];
int flag = 0, lines = 1;
while (fgets(buff, sizeof(buff), fp) != NULL)
{
size_t len = strlen(buff); /* get the length of the string */
if (len > 0 && buff[len - 1] == '\n') /* check if the last character is the newline character */
{
buff[len - 1] = '\0'; /* place \0 in the place of \n */
}
p = strstr(buff, searchforthis);
if (p != NULL)
{
/* match - set flag to 1 */
flag = 1;
break;
}
}
if (flag == 0)
{
printf("This Value has not been found.\n");
}
else
{
printf("This Value was found in following file:\n%s", file_name);
}
flag is used to determine whether or not searchforthis exists in the file.
Side note, if the line contains more than 499 characters, you will need a larger buffer, or a different function, consider getline() for that case, or even a custom one reading character by character.
If you want to do this for multiple files, you have to place the whole process in a loop. For example,
for (int i = 0; i < 5; i++) /* this will execute 5 times */
{
printf("Enter name of a file you wish to check:\n");
...
}
Write a C program that reads from the keyboard a natural number n
with up to 9 digits and creates the text file data.out containing the
number n and all its non-zero prefixes, in a single line, separated by
a space, in order decreasing in value. Example: for n = 10305 the data
file.out will contain the numbers: 10305 1030 103 10 1.
This is what I made:
#include <stdio.h>
int main()
{
int n;
FILE *fisier;
fisier=fopen("date.in","w");
printf("n= \n");
scanf("%d",&n);
fprintf(fisier,"%d",n);
while(n!=0)
{
fisier=fopen("date.in","r");
n=n/10;
fprintf(fisier,"%d",n);
}
fclose(fisier);
}
Few things:
Function calls may return error. You need to check that every time.
fisier=fopen("date.in","w");
This should have been followed by an error check. To understand more on what it return, first thing you should do is read the man page for that function. See man page for fopen(). If there is an error in opening the file, it will return NULL and errno is set to a value which indicates what error occurred.
if (NULL == fisier)
{
// Error handling code
;
}
Your next requirement is separating the numbers by a space. There isn't one. The following should do it.
fprintf(fisier, "%d ", n);
The next major problem is opening the file in a loop. Its like you are trying to open a door which is already open.
fisier=fopen("date.in","r");
if(NULL == fisier)
{
// Error handling code
;
}
while(n!=0)
{
n=n/10;
fprintf(fisier,"%d",n);
}
fclose(fisier);
A minor issue that you aren't checking is the number is not having more than 9 digits.
if(n > 999999999)
is apt after you get a number. If you want to deal with negative numbers as well, you can modify this condition the way you want.
In a nutshell, at least to start with, the program should be something similar to this:
#include <stdio.h>
// Need a buffer to read the file into it. 64 isn't a magic number.
// To print a 9 digit number followed by a white space and then a 8 digit number..
// and so on, you need little less than 64 bytes.
// I prefer keeping the memory aligned to multiples of 8.
char buffer[64];
int main(void)
{
size_t readBytes = 0;
int n = 0;
printf("\nEnter a number: ");
scanf("%d", &n);
// Open the file
FILE *pFile = fopen("date.in", "w+");
if(NULL == pFile)
{
// Prefer perror() instead of printf() for priting errors
perror("\nError: ");
return 0;
}
while(n != 0)
{
// Append to the file
fprintf(pFile, "%d ", n);
n = n / 10;
}
// Done, close the file
fclose(pFile);
printf("\nPrinting the file: ");
// Open the file
pFile = fopen("date.in", "r");
if(NULL == pFile)
{
// Prefer perror() instead of printf() for priting errors
perror("\nError: ");
return 0;
}
// Read the file
while((readBytes = fread(buffer, 1, sizeof buffer, pFile)) > 0)
{
// Preferably better way to print the contents of the file on stdout!
fwrite(buffer, 1, readBytes, stdout);
}
printf("\nExiting..\n\n");
return 0;
}
Remember: The person reading your code may not be aware of all the requirements, so comments are necessary. Secondly, I understand english to a decent level but I don't know what 'fisier' means. Its recommended to name variables in such a way that its easy to understand the purpose of the variable. For example, pFile is a pointer to a file. p in the variable immediately gives an idea that its a pointer.
Hope this helps!
To draw a conclusion from all the comments:
fopen returns a file handle when successfull and NULL otherwise. Opening a file twice might result in an error (it does on my machine), such that fisier is set to NULL inside the loop. Obvioulsy fprintf to NULL wont do anything.
You only need to call fopen once, so remove it from the loop. After that it will work as intended.
It's alwas good to check if the fopen succeeded or not:
FILE *fisier;
fisier=fopen("date.in","w");
if(!fisier) { /* handle error */ }
You print no spaces between the numbers. Maybe that's intended, but maybe
fprintf(fisier,"%d ",n);
would be better.
I'm working on an example problem where I have to reverse the text in a text file using fseek() and ftell(). I was successful, but printing the same output to a file, I had some weird results.
The text file I input was the following:
redivider
racecar
kayak
civic
level
refer
These are all palindromes
The result in the command line works great. In the text file that I create however, I get the following:
ÿsemordnilap lla era esehTT
referr
levell
civicc
kayakk
racecarr
redivide
I am aware from the answer to this question says that this corresponds to the text file version of EOF in C. I'm just confused as to why the command line and text file outputs are different.
#include <stdio.h>
#include <stdlib.h>
/**********************************
This program is designed to read in a text file and then reverse the order
of the text.
The reversed text then gets output to a new file.
The new file is then opened and read.
**********************************/
int main()
{
//Open our files and check for NULL
FILE *fp = NULL;
fp = fopen("mainText.txt","r");
if (!fp)
return -1;
FILE *fnew = NULL;
fnew = fopen("reversedText.txt","w+");
if (!fnew)
return -2;
//Go to the end of the file so we can reverse it
int i = 1;
fseek(fp, 0, SEEK_END);
int endNum = ftell(fp);
while(i < endNum+1)
{
fseek(fp,-i,SEEK_END);
printf("%c",fgetc(fp));
fputc(fgetc(fp),fnew);
i++;
}
fclose(fp);
fclose(fnew);
fp = NULL;
fnew = NULL;
return 0;
}
No errors, I just want identical outputs.
The outputs are different because your loop reads two characters from fp per iteration.
For example, in the first iteration i is 1 and so fseek sets the current file position of fp just before the last byte:
...
These are all palindromes
^
Then printf("%c",fgetc(fp)); reads a byte (s) and prints it to the console. Having read the s, the file position is now
...
These are all palindromes
^
i.e. we're at the end of the file.
Then fputc(fgetc(fp),fnew); attempts to read another byte from fp. This fails and fgetc returns EOF (a negative value, usually -1) instead. However, your code is not prepared for this and blindly treats -1 as a character code. Converted to a byte, -1 corresponds to 255, which is the character code for ÿ in the ISO-8859-1 encoding. This byte is written to your file.
In the next iteration of the loop we seek back to the e:
...
These are all palindromes
^
Again the loop reads two characters: e is written to the console, and s is written to the file.
This continues backwards until we reach the beginning of the input file:
redivider
^
Yet again the loop reads two characters: r is written to the console, and e is written to the file.
This ends the loop. The end result is that your output file contains one character that doesn't exist (from the attempt to read past the end of the input file) and never sees the first character.
The fix is to only call fgetc once per loop:
while(i < endNum+1)
{
fseek(fp,-i,SEEK_END);
int c = fgetc(fp);
if (c == EOF) {
perror("error reading from mainText.txt");
exit(EXIT_FAILURE);
}
printf("%c", c);
fputc(c, fnew);
i++;
}
In addition to #melpomene correction about using only 1 fgetc() per loops, other issues exist.
fseek(questionable_offset)
fopen("mainText.txt","r"); opens the file in text mode and not binary mode. Thus the using fseek(various_values) as a valid offset into the file is prone to troubles. Usually not a problem in *nix systems.
I do not have a simple alternative.
ftell() return type
ftell() return long. Use long instead of int i, endNum. (Not a concern with small files)
Check return values
ftell() and fseek() can fail. Test for error returns.
I'm intermediate student of C. I'm trying to make a bank management program but first I need to make a login program, so I created one of the following. As I've recently learned about file I/O in C and don't know much about fread and fwrite. I have a file (data.txt) which format if as following.
user1 1124
user2 3215
user3 5431
In the following program I've asked user to input user name and pin(4-digit password) and copy file data into a structure then compare these two for verifying information.
What is wrong with my program and how to make fread work properly. And is the formating in data.txt file all right or should I change it.
Thanks in advance...
#include<stdio.h>
#include<ctype.h>
#include<string.h>
struct user_account {
char u_name[30];
int u_pin;
} log_in;
int login()
{
int start;
int i, n;
int t_pin[4]; // TEMPORARY INT PIN for storing pin inputed by user
char t_name[30]; // TEMPORARY STRING for storing name inputed by user
FILE *fp;
fp = fopen("data.txt","rb"); // Opening record file
if(fp == NULL)
{
puts("Unable to open file!");
return 1;
}
start : {
printf("User Name : ");
scanf("%s",&t_name);
printf("Pin Code : ");
for(i = 0; i < 4; i++) { // This loop is for hiding input pin
n = getch();
if(isdigit(n)) {
t_pin[i] = n;
printf("*"); }
else {
printf("\b");
i--;
}
}
fread(&log_in,sizeof(log_in),1,fp);
// Comparing user name and pin with info in the structure copied from the file
if(strcmp(log_in.u_name, t_name) == 0 && log_in.u_pin == t_pin)
puts("Login successful! Welcome User");
else {
printf("\nIncorrect Information!\n");
printf("Press any key to log in again...");
getch();
system("cls");
goto start; }
}
}
int main()
{
int login();
return 0;
}
The problem is that you have an ASCII/text file but you are trying to use fread to read directly into a structure; this requires a binary formatted file. fread cannot do format conversion. Use fscanf instead:
fscanf(fp, "%s %d", &log_in.u_name, &log_in.u_pin);
Problems that I see:
The following line is incorrect.
scanf("%s",&t_name);
You need to use:
scanf("%29s",t_name);
fread is not the right solution given the file format. fread works when the file is in binary format.
Given the format of your input file, you need to use:
scanf("%29s %d", log_in.uname, &log_in.u_pin);
Comparing the pins using log_in.u_pin == t_pin should produce a compiler error. The type of log_in.u_pin is int while the type of t_pin is int [4]. You will have to change your strategy for getting the integer value from t_pin.
You can use something like:
int pin = 0;
for (i = 0; i < 4; ++i )
{
pin = 10*pin + t_pin[i];
}
However, for that to work, you have store the proper integer values in t_pin. When the character you read is '1', you have to store 1. Either that, or you will have to change the above for loop to:
pin = 10*pin + t_pin[i]-'0';
The way are using goto start to loop in your function is not correct. You haven't read all the user ID and pins to from the input file and compared them. The way you have it, you will end up doing:
Read the user name and pin
Check against the first entry in the file. If they don't match...
Read the user name and pin again.
Check against the next entry in the file. If they don't match...
etc.
You want to:
Read the user name and pin
Check against the first entry in the file. If they don't match...
Check against the next entry in the file. If they don't match...
Check against the next entry in the file. If they don't match...
etc.
a) fread is used to read fixed sized (in bytes) records. While that is an option, you might find that fscanf is more suited to your use case.
b) goto has its uses, arguably, but in your particular case a while loop is far more appropriate as it make the intention clearer and is less susceptible to misuse.
c) The crux of your issue is reading the file. You only read in and check against a single record from your file per pass and once all records are read you will be getting EOF rather than additional records.
You have a few options. You might read the entire user table into a list prior to your login loop. When a user logs in you must iterate through the list until a match or end of list is found. Alternatively you might loop through the entire file on each user attempt looking for a match and seek to the back to the beginning of the file when you are done. In either case you must check for and handle read errors.
d) Finally when a non-digit is entered you will probably find that backspace isn't what you had in mind. Also you might consider allowing the user to press backspace while entering the pin.
I know this is a dumb question, but how would I load data from a multiline text file?
while (!feof(in)) {
fscanf(in,"%s %s %s \n",string1,string2,string3);
}
^^This is how I load data from a single line, and it works fine. I just have no clue how to load the same data from the second and third lines.
Again, I realize this is probably a dumb question.
Edit: Problem not solved. I have no idea how to read text from a file that's not on the first line. How would I do this? Sorry for the stupid question.
Try something like:
/edited/
char line[512]; // or however large you think these lines will be
in = fopen ("multilinefile.txt", "rt"); /* open the file for reading */
/* "rt" means open the file for reading text */
int cur_line = 0;
while(fgets(line, 512, in) != NULL) {
if (cur_line == 2) { // 3rd line
/* get a line, up to 512 chars from in. done if NULL */
sscanf (line, "%s %s %s \n",string1,string2,string3);
// now you should store or manipulate those strings
break;
}
cur_line++;
}
fclose(in); /* close the file */
or maybe even...
char line[512];
in = fopen ("multilinefile.txt", "rt"); /* open the file for reading */
fgets(line, 512, in); // throw out line one
fgets(line, 512, in); // on line 2
sscanf (line, "%s %s %s \n",string1,string2,string3); // line 2 is loaded into 'line'
// do stuff with line 2
fgets(line, 512, in); // on line 3
sscanf (line, "%s %s %s \n",string1,string2,string3); // line 3 is loaded into 'line'
// do stuff with line 3
fclose(in); // close file
Putting \n in a scanf format string has no different effect from a space. You should use fgets to get the line, then sscanf on the string itself.
This also allows for easier error recovery. If it were just a matter of matching the newline, you could use "%*[ \t]%*1[\n]" instead of " \n" at the end of the string. You should probably use %*[ \t] in place of all your spaces in that case, and check the return value from fscanf. Using fscanf directly on input is very difficult to get right (what happens if there are four words on a line? what happens if there are only two?) and I would recommend the fgets/sscanf solution.
Also, as Delan Azabani mentioned... it's not clear from this fragment whether you're not already doing so, but you have to either define space [e.g. in a large array or some dynamic structure with malloc] to store the entire dataset, or do all your processing inside the loop.
You should also be specifying how much space is available for each string in the format specifier. %s by itself in scanf is always a bug and may be a security vulnerability.
First off, you don't use feof() like that...it shows a probable Pascal background, either in your past or in your teacher's past.
For reading lines, you are best off using either POSIX 2008 (Linux) getline() or standard C fgets(). Either way, you try reading the line with the function, and stop when it indicates EOF:
while (fgets(buffer, sizeof(buffer), fp) != 0)
{
...use the line of data in buffer...
}
char *bufptr = 0;
size_t buflen = 0;
while (getline(&bufptr, &buflen, fp) != -1)
{
...use the line of data in bufptr...
}
free(bufptr);
To read multiple lines, you need to decide whether you need previous lines available as well. If not, a single string (character array) will do. If you need the previous lines, then you need to read into an array, possibly an array of dynamically allocated pointers.
Every time you call fscanf, it reads more values. The problem you have right now is that you're re-reading each line into the same variables, so in the end, the three variables have the last line's values. Try creating an array or other structure that can hold all the values you need.
The best way to do this is to use a two dimensional array and and just write each line into each element of the array. Here is an example reading from a .txt file of the poem Ozymandias:
int main() {
char line[15][255];
FILE * fpointer = fopen("ozymandias.txt", "rt");
for (int a = 0; a < 15; a++) {
fgets(line[a], 255, fpointer);
}
for (int b = 0; b < 15; b++) {
printf("%s", line[b]);
}
return 0;
This produces the poem output. Notice that the poem is 14 lines long, it is more difficult to print out a file whose length you do not know because reading a blank line will produce the output "x�oA". Another issue is if you check if the next line is null by writing
while (fgets(....) != NULL)) {
each line will be skipped. You could try going back a line each time to solve this but i think this solution is fine for all intents.
I have an even EASIER solution with no confusing snippets of puzzling methods (no offense to the above stated) here it is:
#include <iostream>
#include <fstream>
#include <string>
using namespace std;
int main()
{
string line;//read the line
ifstream myfile ("MainMenu.txt"); // make sure to put this inside the project folder with all your .h and .cpp files
if (myfile.is_open())
{
while ( myfile.good() )
{
getline (myfile,line);
cout << line << endl;
}
myfile.close();
}
else cout << "Unable to open file";
return 0;
}
Happy coding