I'm learning AVL Tree and got TLE in recursive code. My tutor suggests to iterative solution. I searched and found a solution which saves parent node in child.
I wonder this one could get problem in memory, doesn't it?
And is there another way to insert, delete in AVL Tree what doesn't need to save parent in child ones? Please give me a hint.
There are several choices when implementing AVL trees:
- recursion or iterative
- store balance factor (height of right minus height of left) or height
- store parent reference or not
Recursive with height tends to give the most elegant solution but iterative may perform better in some cases so it is worth considering.
You can read about the choices:
http://www.eternallyconfuzzled.com/tuts/datastructures/jsw_tut_avl.aspx
and view an iterative implementation in Java:
https://github.com/dmcmanam/bbst-showdown
Parent reference is required in iterative (non-recursive) approach, because it is necessary to retrace after insertion/deletion, we could retrace with stack in recursive approach, while we could only retrace with parent reference in iterative approach. See https://en.wikipedia.org/wiki/AVL_tree#Insert and https://en.wikipedia.org/wiki/AVL_tree#Delete.
After this insertion it is necessary to check each of the node’s ancestors for consistency with the invariants of AVL trees: this is called "retracing".
Here is an iterative BalanceFactor-based AVL tree implementation in C: https://github.com/xieqing/avl-tree
I'm taking a class in data structures and was given the assignment to find the shortest path through a maze using C and implementing the queue data structure. However, I can't really wrap my head around how to use a queue here.
I know the idea is to count every possible move from the start position, and when you hit the target, you're supposed to trace back to the initial position. This is what I don't understand. Because if I use a queue and delete all the moves that leads up to the target, I have no data to use to do the trace back, and if I don't delete the moves that lead to the target (i.e. saving all the possible moves and deleting them when I actually do the trace back), I might as well be using a stack.
I know there's something I don't quite get, but I can't figure out what it is. How would I utilize the queue data structure in this case?
What your professor is trying to get you to use is called "breadth-first search". The queue comes in for deciding which spaces to explore next. When you are looking at the possible paths to take, you enqueue all the paths you have yet to explore. Instead of continuing down the path you're on (which would be "depth-first search"), you dequeue the next spot you need to check, which will take you back to one of the positions you were considering earlier.
The actual implementation is up to you, I'd recommend looking for examples of breadth-first search online.
I have to solve the "rush hour puzzle" by iterative deepening algorithm. I have read a lot of topics here on stackoverflow and also on the internet. I think that I understand the iterative deepening algorithm. Basically you just go deeper into the tree and try to find the solution.
I figured that I need to create a graph or a tree from the puzzle, but I really don't have an idea how. Also, if I would have the tree, then how would I tell if something is a valid move or a final state?
There were answers that the nodes should be possible moves and the edges are between the nodes that can be reached in one move. I can imagine this, but somehow I'm getting trouble in see how this can be useful or better yet how can this solve the problem.
Please help me, I'm not asking for complete solution or code sample, I just need some easy explanation of the problem.
There is a reason you need to use the deepening algorithm. Imagine you name each car A, B, C, D... The root node of your tree is the initial board state. Now, move car A. You go down one node in the tree. Move car A back. You are at the initial state, but you made two moves to get here, so you are two nodes down the tree. Repeat over and over. You will never hit a final state.
The root node of your tree is the initial board state. Given that node, add a child node to it for every possible valid move. So, each child node will be what the initial tree looks like after one move. Now, for each of those child nodes, do the same thing: make a child node where each node is one move off the original child node.
Eventually, you will hit a solution to the puzzle. When that happens, you print the moves from the root node to the solution child node and quit. This algorithm ensures that you find a solution with the least number of moves.
I found a lot of references to the AI of the ghosts in Pacman, but none of them mentioned how the eyes find their way back to the central ghost hole after a ghost is eaten by Pacman.
In my implementation I implemented a simple but awful solution. I just hard coded on every corner which direction should be taken.
Are there any better/or the best solution? Maybe a generic one that works with different level designs?
Actually, I'd say your approach is a pretty awesome solution, with almost zero-run time cost compared to any sort of pathfinding.
If you need it to generalise to arbitrary maps, you could use any pathfinding algorithm - breadth-first search is simple to implement, for example - and use that to calculate which directions to encode at each of the corners, before the game is run.
EDIT (11th August 2010): I was just referred to a very detailed page on the Pacman system: The Pac-Man Dossier, and since I have the accepted answer here, I felt I should update it. The article doesn't seem to cover the act of returning to the monster house explicitly but it states that the direct pathfinding in Pac-Man is a case of the following:
continue moving towards the next intersection (although this is essentially a special case of 'when given a choice, choose the direction that doesn't involve reversing your direction, as seen in the next step);
at the intersection, look at the adjacent exit squares, except the one you just came from;
picking one which is nearest the goal. If more than one is equally near the goal, pick the first valid direction in this order: up, left, down, right.
I've solved this problem for generic levels that way: Before the level starts, I do some kind of "flood fill" from the monster hole; every tile of the maze that isn't a wall gets a number that says how far it is away from the hole. So when the eyes are on a tile with a distance of 68, they look which of the neighbouring tiles has a distance of 67; that's the way to go then.
For an alternative to more traditional pathfinding algorithms, you could take a look at the (appropriately-named!) Pac-Man Scent Antiobject pattern.
You could diffuse monster-hole-scent around the maze at startup and have the eyes follow it home.
Once the smell is set up, runtime cost is very low.
Edit: sadly the wikipedia article has been deleted, so WayBack Machine to the rescue...
You should take a look a pathfindings algorithm, like Dijsktra's Algorithm or A* algorithm. This is what your problem is : a graph/path problem.
Any simple solution that works is maintainable, reliable and performs well enough is a good solution. It sounds to me like you have already found a good solution ...
An path-finding solution is likely to be more complicated than your current solution, and hence more likely to require debugging. It will probably also be slower.
IMO, if it ain't broken, don't fix it.
EDIT
IMO, if the maze is fixed then your current solution is good / elegant code. Don't make the mistake of equating "good" or "elegant" with "clever". Simple code can also be "good" and "elegant".
If you have configurable maze levels, then maybe you should just do the pathfinding when you initially configure the mazes. Simplest would be to get the maze designer to do it by hand. I'd only bother automating this if you have a bazillion mazes ... or users can design them.
(Aside: if the routes are configured by hand, the maze designer could make a level more interesting by using suboptimal routes ... )
In the original Pacman the Ghost found the yellow pill eater by his "smell" he would leave a trace on the map, the ghost would wander around randomly until they found the smell, then they would simply follow the smell path which lead them directly to the player. Each time Pacman moved, the "smell values" would get decreased by 1.
Now, a simple way to reverse the whole process would be to have a "pyramid of ghost smell", which has its highest point at the center of the map, then the ghost just move in the direction of this smell.
Assuming you already have the logic required for chasing pacman why not reuse that? Just change the target. Seems like it would be a lot less work than trying to create a whole new routine using the exact same logic.
It's a pathfinding problem. For a popular algorithm, see http://wiki.gamedev.net/index.php/A*.
How about each square having a value of distance to the center? This way for each given square you can get values of immediate neighbor squares in all possible directions. You pick the square with the lowest value and move to that square.
Values would be pre-calculated using any available algorithm.
This was the best source that I could find on how it actually worked.
http://gameai.com/wiki/index.php?title=Pac-Man#Respawn
When the ghosts are killed, their disembodied eyes return to their starting location. This is simply accomplished by setting the ghost's target tile to that location. The navigation uses the same rules.
It actually makes sense. Maybe not the most efficient in the world but a pretty nice way to not have to worry about another state or anything along those lines you are just changing the target.
Side note: I did not realize how awesome those pac-man programmers were they basically made an entire message system in a very small space with very limited memory ... that is amazing.
I think your solution is right for the problem, simpler than that, is to make a new version more "realistic" where ghost eyes can go through walls =)
Here's an analog and pseudocode to ammoQ's flood fill idea.
queue q
enqueue q, ghost_origin
set visited
while q has squares
p <= dequeue q
for each square s adjacent to p
if ( s not in visited ) then
add s to visited
s.returndirection <= direction from s to p
enqueue q, s
end if
next
next
The idea is that it's a breadth-first search, so each time you encounter a new adjacent square s, the best path is through p. It's O(N) I do believe.
I don't know much on how you implemented your game but, you could do the following:
Determine the eyes location relative position to the gate. i.e. Is it left above? Right below?
Then move the eyes opposite one of the two directions (such as make it move left if it is right of the gate, and below the gate) and check if there are and walls preventing you from doing so.
If there are walls preventing you from doing so then make it move opposite the other direction (for example, if the coordinates of the eyes relative to the pin is right north and it was currently moving left but there is a wall in the way make it move south.
Remember to keep checking each time to move to keep checking where the eyes are in relative to the gate and check to see when there is no latitudinal coordinate. i.e. it is only above the gate.
In the case it is only above the gate move down if there is a wall, move either left or right and keep doing this number 1 - 4 until the eyes are in the den.
I've never seen a dead end in Pacman this code will not account for dead ends.
Also, I have included a solution to when the eyes would "wobble" between a wall that spans across the origin in my pseudocode.
Some pseudocode:
x = getRelativeOppositeLatitudinalCoord()
y
origX = x
while(eyesNotInPen())
x = getRelativeOppositeLatitudinalCoordofGate()
y = getRelativeOppositeLongitudinalCoordofGate()
if (getRelativeOppositeLatitudinalCoordofGate() == 0 && move(y) == false/*assume zero is neither left or right of the the gate and false means wall is in the way */)
while (move(y) == false)
move(origX)
x = getRelativeOppositeLatitudinalCoordofGate()
else if (move(x) == false) {
move(y)
endWhile
dtb23's suggestion of just picking a random direction at each corner, and eventually you'll find the monster-hole sounds horribly ineficient.
However you could make use of its inefficient return-to-home algorithm to make the game more fun by introducing more variation in the game difficulty. You'd do this by applying one of the above approaches such as your waypoints or the flood fill, but doing so non-deterministically. So at every corner, you could generate a random number to decide whether to take the optimal way, or a random direction.
As the player progresses levels, you reduce the likelihood that a random direction is taken. This would add another lever on the overall difficulty level in addition to the level speed, ghost speed, pill-eating pause (etc). You've got more time to relax while the ghosts are just harmless eyes, but that time becomes shorter and shorter as you progress.
Short answer, not very well. :) If you alter the Pac-man maze the eyes won't necessarily come back. Some of the hacks floating around have that problem. So it's dependent on having a cooperative maze.
I would propose that the ghost stores the path he has taken from the hole to the Pacman. So as soon as the ghost dies, he can follow this stored path in the reverse direction.
Knowing that pacman paths are non-random (ie, each specific level 0-255, inky, blinky, pinky, and clyde will work the exact same path for that level).
I would take this and then guess there are a few master paths that wraps around the entire
maze as a "return path" that an eyeball object takes pending where it is when pac man ate the ghost.
The ghosts in pacman follow more or less predictable patterns in terms of trying to match on X or Y first until the goal was met. I always assumed that this was exactly the same for eyes finding their way back.
Before the game begins save the nodes (intersections) in the map
When the monster dies take the point (coordinates) and find the
nearest node in your node list
Calculate all the paths beginning from that node to the hole
Take the shortest path by length
Add the length of the space between the point and the nearest node
Draw and move on the path
Enjoy!
My approach is a little memory intensive (from the perspective of Pacman era), but you only need to compute once and it works for any level design (including jumps).
Label Nodes Once
When you first load a level, label all the monster lair nodes 0 (representing the distance from the lair). Proceed outward labelling connected nodes 1, nodes connected to them 2, and so on, until all nodes are labelled. (note: this even works if the lair has multiple entrances)
I'm assuming you already have objects representing each node and connections to their neighbours. Pseudo code might look something like this:
public void fillMap(List<Node> nodes) { // call passing lairNodes
int i = 0;
while(nodes.count > 0) {
// Label with distance from lair
nodes.labelAll(i++);
// Find connected unlabelled nodes
nodes = nodes
.flatMap(n -> n.neighbours)
.filter(!n.isDistanceAssigned());
}
}
Eyes Move to Neighbour with Lowest Distance Label
Once all the nodes are labelled, routing the eyes is trivial... just pick the neighbouring node with the lowest distance label (note: if multiple nodes have equal distance, it doesn't matter which is picked). Pseudo code:
public Node moveEyes(final Node current) {
return current.neighbours.min((n1, n2) -> n1.distance - n2.distance);
}
Fully Labelled Example
For my PacMan game I made a somewhat "shortest multiple path home" algorithm which works for what ever labyrinth I provide it with (within my set of rules). It also works across them tunnels.
When the level is loaded, all the path home data in every crossroad is empty (default) and once the ghosts start to explore the labyrinth, them crossroad path home information keeps getting updated every time they run into a "new" crossroad or from a different path stumble again upon their known crossroad.
The original pac-man didn't use path-finding or fancy AI. It just made gamers believe there is more depth to it than it actually was, but in fact it was random. As stated in Artificial Intelligence for Games/Ian Millington, John Funge.
Not sure if it's true or not, but it makes a lot of sense to me. Honestly, I don't see these behaviors that people are talking about. Red/Blinky for ex is not following the player at all times, as they say. Nobody seems to be consistently following the player, on purpose. The chance that they will follow you looks random to me. And it's just very tempting to see behavior in randomness, especially when the chances of getting chased are very high, with 4 enemies and very limited turning options, in a small space. At least in its initial implementation, the game was extremely simple. Check out the book, it's in one of the first chapters.
I've got a manually created NavGraph in a 3D environment. I understand (and have implemented previously) an A* routine to find my way through the graph once you've 'got on the graph'.
What I'm interested in, is the most optimal way to get onto and 'off' the Graph.
Ex:
So the routine go's something like this:
Shoot a ray from the source to the destination, if theres nothing in the way, go ahead and just walk it.
if theres something in the way, we need to use the graph, so to get onto the graph, we need to find the closest visible node on the graph. (to do this, I previously sorted the graph based on the distance from the source, then fired rays from closet to furthest till i found one that didn't have an obstacle. )
Then run the standard A*...
Then 'exit' the graph, through the same method as we got on the graph (used to calculate the endpoint for the above A*) so I take and fire rays from the endpoint to the closest navgraph node.
so by the time this is all said and done, unless my navgraph is very dense, I've spent more time getting on/off the graph than I have calculating the path...
There has to be a better/faster way? (is there some kind of spacial subdivision trick?)
You could build a Quadtree of all the nodes, to quickly find the closest node from a given position.
It is very common to have a spatial subdivision of the world. Something like a quadtree or octree is common in 3D worlds, although you could overlay a grid too, or track arbitrary regions, etc. Basically it's a simple data-structures problem of giving yourself some sort of access to N navgraph nodes without needing an O(N) search to find where you are, and your choices tend to come down to some sort of tree or some sort of hash table.