I have an Error table which stores the names of the table in which the error occurred.
Now I want to query the table using the table name selected from the "Error" table.
I tried to store the table name in a variable and use this variable in the FROM clause in my query. But this doesn't work:
DECLARE #tableName VARCHAR(15)
select #tableName = TableName from SyncErrorRecords where Status = 'Unsynced'
select * from #tableName
Can anyone help me out on this.
Thanks in advance.
you need to use Dynamic SQL
either
declare #sql nvarchar(max)
select #sql = 'select * from ' + quotename(#tableName)
exec (#sql)
or
exec sp_executesql #sql
The Query as follows.
DECLARE #tableName VARCHAR(15),
#Qry VARCHAR(4000)
SELECT #tableName = TableName FROM SyncErrorRecords WHERE Status = 'Unsynced'
SET #Qry = 'SELECT * FROM ' + #tableName
EXEC SP_EXECUTESQL #Qry
Related
I want to execute the following T-SQL dynamic statement:
CREATE PROCEDURE MergeTable #TableName NVARCHAR(max)
AS BEGIN
DECLARE #MergeStatement NVARCHAR(max)
SET #MergeStatement = 'SELECT Query FROM dbo.QueryMergeDWH WHERE SourceTableName = ' + #TableName
EXEC sp_executesql #MergeStatement
END
EXEC MergeTable #TableName = 'SGPREINVOICE'
However, this gives me the following error:
Msg 207, Level 16, State 1, Line 17 Invalid column name
'SGPREINVOICE'.
This actually works:
SELECT 'SELECT Query FROM dbo.QueryMergeDWH WHERE SourceTableName = ' + 'SGPREINVOICE'
What am I doing wrong here?
You need to parameterize you dynamic query. So you pass #TableName all the way through
CREATE PROCEDURE MergeTable #TableName NVARCHAR(max)
AS
DECLARE #MergeStatement NVARCHAR(max);
SET #MergeStatement = '
SELECT Query
FROM dbo.QueryMergeDWH
WHERE SourceTableName = #TableName;
';
EXEC sp_executesql
#MergeStatement,
N'#TableName nvarchar(max)',
#TableName = #TableName;
GO
But it's unclear what's dynamic about that, you could just as well do
CREATE PROCEDURE MergeTable #TableName NVARCHAR(max)
AS
SELECT Query
FROM dbo.QueryMergeDWH
WHERE SourceTableName = #TableName;
GO
I am trying to execute this query:
declare #tablename varchar(50)
set #tablename = 'test'
select * from #tablename
This produces the following error:
Msg 1087, Level 16, State 1, Line 5
Must declare the table variable "#tablename".
What's the right way to have the table name populated dynamically?
For static queries, like the one in your question, table names and column names need to be static.
For dynamic queries, you should generate the full SQL dynamically, and use sp_executesql to execute it.
Here is an example of a script used to compare data between the same tables of different databases:
Static query:
SELECT * FROM [DB_ONE].[dbo].[ACTY]
EXCEPT
SELECT * FROM [DB_TWO].[dbo].[ACTY]
Since I want to easily change the name of table and schema, I have created this dynamic query:
declare #schema sysname;
declare #table sysname;
declare #query nvarchar(max);
set #schema = 'dbo'
set #table = 'ACTY'
set #query = '
SELECT * FROM [DB_ONE].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table) + '
EXCEPT
SELECT * FROM [DB_TWO].' + QUOTENAME(#schema) + '.' + QUOTENAME(#table);
EXEC sp_executesql #query
Since dynamic queries have many details that need to be considered and they are hard to maintain, I recommend that you read: The curse and blessings of dynamic SQL
Change your last statement to this:
EXEC('SELECT * FROM ' + #tablename)
This is how I do mine in a stored procedure. The first block will declare the variable, and set the table name based on the current year and month name, in this case TEST_2012OCTOBER. I then check if it exists in the database already, and remove if it does. Then the next block will use a SELECT INTO statement to create the table and populate it with records from another table with parameters.
--DECLARE TABLE NAME VARIABLE DYNAMICALLY
DECLARE #table_name varchar(max)
SET #table_name =
(SELECT 'TEST_'
+ DATENAME(YEAR,GETDATE())
+ UPPER(DATENAME(MONTH,GETDATE())) )
--DROP THE TABLE IF IT ALREADY EXISTS
IF EXISTS(SELECT name
FROM sysobjects
WHERE name = #table_name AND xtype = 'U')
BEGIN
EXEC('drop table ' + #table_name)
END
--CREATES TABLE FROM DYNAMIC VARIABLE AND INSERTS ROWS FROM ANOTHER TABLE
EXEC('SELECT * INTO ' + #table_name + ' FROM dbo.MASTER WHERE STATUS_CD = ''A''')
Use:
CREATE PROCEDURE [dbo].[GetByName]
#TableName NVARCHAR(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE #sSQL nvarchar(500);
SELECT #sSQL = N'SELECT * FROM' + QUOTENAME(#TableName);
EXEC sp_executesql #sSQL
END
You can't use a table name for a variable. You'd have to do this instead:
DECLARE #sqlCommand varchar(1000)
SET #sqlCommand = 'SELECT * from yourtable'
EXEC (#sqlCommand)
You'll need to generate the SQL content dynamically:
declare #tablename varchar(50)
set #tablename = 'test'
declare #sql varchar(500)
set #sql = 'select * from ' + #tablename
exec (#sql)
Use sp_executesql to execute any SQL, e.g.
DECLARE #tbl sysname,
#sql nvarchar(4000),
#params nvarchar(4000),
#count int
DECLARE tblcur CURSOR STATIC LOCAL FOR
SELECT object_name(id) FROM syscolumns WHERE name = 'LastUpdated'
ORDER BY 1
OPEN tblcur
WHILE 1 = 1
BEGIN
FETCH tblcur INTO #tbl
IF ##fetch_status <> 0
BREAK
SELECT #sql =
N' SELECT #cnt = COUNT(*) FROM dbo.' + quotename(#tbl) +
N' WHERE LastUpdated BETWEEN #fromdate AND ' +
N' coalesce(#todate, ''99991231'')'
SELECT #params = N'#fromdate datetime, ' +
N'#todate datetime = NULL, ' +
N'#cnt int OUTPUT'
EXEC sp_executesql #sql, #params, '20060101', #cnt = #count OUTPUT
PRINT #tbl + ': ' + convert(varchar(10), #count) + ' modified rows.'
END
DEALLOCATE tblcur
You need to use the SQL Server dynamic SQL:
DECLARE #table NVARCHAR(128),
#sql NVARCHAR(MAX);
SET #table = N'tableName';
SET #sql = N'SELECT * FROM ' + #table;
Use EXEC to execute any SQL:
EXEC (#sql)
Use EXEC sp_executesql to execute any SQL:
EXEC sp_executesql #sql;
Use EXECUTE sp_executesql to execute any SQL:
EXECUTE sp_executesql #sql
Declare #tablename varchar(50)
set #tablename = 'Your table Name'
EXEC('select * from ' + #tablename)
Also, you can use this...
DECLARE #SeqID varchar(150);
DECLARE #TableName varchar(150);
SET #TableName = (Select TableName from Table);
SET #SeqID = 'SELECT NEXT VALUE FOR ' + #TableName + '_Data'
exec (#SeqID)
Declare #fs_e int, #C_Tables CURSOR, #Table varchar(50)
SET #C_Tables = CURSOR FOR
select name from sysobjects where OBJECTPROPERTY(id, N'IsUserTable') = 1 AND name like 'TR_%'
OPEN #C_Tables
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
WHILE ( #fs_e <> -1)
BEGIN
exec('Select * from ' + #Table)
FETCH #C_Tables INTO #Table
SELECT #fs_e = sdec.fetch_Status FROM sys.dm_exec_cursors(0) as sdec where sdec.name = '#C_Tables'
END
I want my query get the employees who have the rank depending on the condition
in Condition column in a SQL Server query
It will give you some idea.
Declare #Command varchar(Max)
Declare #condition varchar(100)
Select #condition = condition from [rank] where mgr = 2
Set #Command = 'Select * from Empployee
where ' + #condition
Execute (#Command)
You could achieve that by using dynamic SQL in stored procedure.
CREATE PROCEDURE SelectEmpWithComdition #mgr int
AS
BEGIN
declare #query varchar(max), #condition varchar(max)
set #query = 'select empid, empname, rank from employees where '
select #condition = Condtition from Conditions where mgr = #mgr
set #query = #query + #condition
exec sp_executesql #query
END
create procedure sp_First
#columnname varchar
AS
begin
select #columnname from Table_1
end
exec sp_First 'sname'
My requirement is to pass column names as input parameters.
I tried like that but it gave wrong output.
So Help me
You can do this in a couple of ways.
One, is to build up the query yourself and execute it.
SET #sql = 'SELECT ' + #columnName + ' FROM yourTable'
sp_executesql #sql
If you opt for that method, be very certain to santise your input. Even if you know your application will only give 'real' column names, what if some-one finds a crack in your security and is able to execute the SP directly? Then they can execute just about anything they like. With dynamic SQL, always, always, validate the parameters.
Alternatively, you can write a CASE statement...
SELECT
CASE #columnName
WHEN 'Col1' THEN Col1
WHEN 'Col2' THEN Col2
ELSE NULL
END as selectedColumn
FROM
yourTable
This is a bit more long winded, but a whole lot more secure.
No. That would just select the parameter value. You would need to use dynamic sql.
In your procedure you would have the following:
DECLARE #sql nvarchar(max) = 'SELECT ' + #columnname + ' FROM Table_1';
exec sp_executesql #sql, N''
Try using dynamic SQL:
create procedure sp_First #columnname varchar
AS
begin
declare #sql nvarchar(4000);
set #sql='select ['+#columnname+'] from Table_1';
exec sp_executesql #sql
end
go
exec sp_First 'sname'
go
This is not possible. Either use dynamic SQL (dangerous) or a gigantic case expression (slow).
Create PROCEDURE USP_S_NameAvilability
(#Value VARCHAR(50)=null,
#TableName VARCHAR(50)=null,
#ColumnName VARCHAR(50)=null)
AS
BEGIN
DECLARE #cmd AS NVARCHAR(max)
SET #Value = ''''+#Value+ ''''
SET #cmd = N'SELECT * FROM ' + #TableName + ' WHERE ' + #ColumnName + ' = ' + #Value
EXEC(#cmd)
END
As i have tried one the answer, it is getting executed successfully but while running its not giving correct output, the above works well
You can pass the column name but you cannot use it in a sql statemnt like
Select #Columnname From Table
One could build a dynamic sql string and execute it like EXEC (#SQL)
For more information see this answer on dynamic sql.
Dynamic SQL Pros and Cons
As mentioned by MatBailie
This is much more safe since it is not a dynamic query and ther are lesser chances of sql injection . I Added one situation where you even want the where clause to be dynamic . XX YY are Columns names
CREATE PROCEDURE [dbo].[DASH_getTP_under_TP]
(
#fromColumnName varchar(10) ,
#toColumnName varchar(10) ,
#ID varchar(10)
)
as
begin
-- this is the column required for where clause
declare #colname varchar(50)
set #colname=case #fromUserType
when 'XX' then 'XX'
when 'YY' then 'YY'
end
select SelectedColumnId from (
select
case #toColumnName
when 'XX' then tablename.XX
when 'YY' then tablename.YY
end as SelectedColumnId,
From tablename
where
(case #fromUserType
when 'XX' then XX
when 'YY' then YY
end)= ISNULL(#ID , #colname)
) as tbl1 group by SelectedColumnId
end
First Run;
CREATE PROCEDURE sp_First #columnname NVARCHAR(128)--128 = SQL Server Maximum Column Name Length
AS
BEGIN
DECLARE #query NVARCHAR(MAX)
SET #query = 'SELECT ' + #columnname + ' FROM Table_1'
EXEC(#query)
END
Second Run;
EXEC sp_First 'COLUMN_Name'
Please Try with this.
I hope it will work for you.
Create Procedure Test
(
#Table VARCHAR(500),
#Column VARCHAR(100),
#Value VARCHAR(300)
)
AS
BEGIN
DECLARE #sql nvarchar(1000)
SET #sql = 'SELECT * FROM ' + #Table + ' WHERE ' + #Column + ' = ' + #Value
--SELECT #sql
exec (#sql)
END
-----execution----
/** Exec Test Products,IsDeposit,1 **/
Hi I am writing a large stored procedure, which creates a dynamic report table, of n columns in size, the first 6 are constant the remainder depend on a few arguments passed to the procedure to create the table with the required columns.
The problem that I am having is with the following TSQL
DECLARE #columnname VARCHAR(50)
SET #columnname = 'on_' + #description
IF NOT EXISTS(SELECT * FROM syscolumns WHERE id = OBJECT_ID('reports')
AND NAME = #columnname)
BEGIN
ALTER TABLE reports ADD #columnname VARCHAR(50) NULL
END
I am getting syntax errors with this at the #columnname in the ALTER TABLE statement of the above code.
Also as I am new to this, I am not sure if this is the best way to do this, or if there are better ways in TSQL to generate the required dynamic table.
Try this:
declare #sql nvarchar(100)
set #sql = 'ALTER TABLE reports ADD '+ #columnname+' VARCHAR(50) NULL'
exec sp_executesql #sql
Try
DECLARE #columnname VARCHAR(50)
SET #columnname = '[on_' + #description +']'
IF NOT EXISTS(SELECT * FROM syscolumns WHERE id = OBJECT_ID('reports')
AND NAME = #columnname)
BEGIN
ALTER TABLE reports ADD #columnname VARCHAR(50) NULL
END
Cannot get around having to do it dynamically I believe so change your BEGIN block to something like this:
DECLARE #sql VARCHAR(8000)
BEGIN
SET #sql = 'ALTER TABLE Table_1 ADD '+#columnname+' VARCHAR(50) NULL'
EXEC(#sql)
END