I am trying to follow these instructions for my system and am as far as step 8 (unit tests & coverage).
When I execute this command on the server it works succesfully:
"C:\Program Files (x86)\OpenCover\OpenCover.Console.exe" -register:user -target:"C:\Program Files (x86)\NUnit.org\nunit-console\nunit3-console.exe" -targetargs:"C:\workspace\Extensions\Extensions\ExtensionTests\bin\Debug\ExtensionsTests.dll -result=TestResult.xml;format=nunit2" -filter:+
If I add it as a Jenkins Batch command step I get:
"C:\Program Files (x86)\OpenCover\OpenCover.Console.exe" -register:user -target:"C:\Program Files (x86)\NUnit.org\nunit-console\nunit3-console.exe" -targetargs:"C:\workspace\Extensions\Extensions\ExtensionTests\bin\Debug\ExtensionsTests.dll -result=TestResult.xml;format=nunit2" -filter:+
Executing: C:\Program Files (x86)\NUnit.org\nunit-console\nunit3-console.exe
NUnit Console Runner 3.8.0
Copyright (c) 2018 Charlie Poole, Rob Prouse
Runtime Environment
OS Version: Microsoft Windows NT 6.3.9600.0
CLR Version: 4.0.30319.42000
Test Files
C:\workspace\Extensions\Extensions\ExtensionTests\bin\Debug\ExtensionsTests.dll
Run Settings
DisposeRunners: True
WorkDirectory: c:\workspace\Extensions
ImageRuntimeVersion: 4.0.30319
ImageTargetFrameworkName: .NETFramework,Version=v4.6.1
ImageRequiresX86: False
ImageRequiresDefaultAppDomainAssemblyResolver: False
NumberOfTestWorkers: 2
Test Run Summary
Overall result: Passed
Test Count: 37, Passed: 37, Failed: 0, Warnings: 0, Inconclusive: 0, Skipped: 0
Start time: 2018-02-23 10:40:58Z
End time: 2018-02-23 10:40:59Z
Duration: 1.106 seconds
Results (nunit2) saved as TestResult.xml
Committing...
No results, this could be for a number of reasons. The most common reasons are:
1) missing PDBs for the assemblies that match the filter please review the
output file and refer to the Usage guide (Usage.rtf) about filters.
2) the profiler may not be registered correctly, please refer to the Usage
guide and the -register switch.
I have tried setting the Jenkins to run under my ID and allowed it to interact with the desktop.
Can someone point me in the right direction to get it running please?
Ahh so I found the answer from this question, I just needed to move a quote to give:
"C:\Program Files (x86)\OpenCover\OpenCover.Console.exe" -register:user -target:"C:\Program Files (x86)\NUnit.org\nunit-console\nunit3-console.exe" -"targetargs:C:\workspace\Extensions\Extensions\ExtensionTests\bin\Debug\ExtensionsTests.dll -result=TestResult.xml;format=nunit2" -filter:+
Which works!
Related
I have a Mac and just installed LaTeX and the editor Texmaker. To use the Arial font I installed it via MiKTeX Console. I also found out that by doing so, the files for the installed packages lay here:
"/Users/Mirko/Library/Application Support/MiKTeX/texmfs/install/tex/latex"
My problem is that the Editor (TeXMaker) still doesn't find the Arial-Font.
Here is my Code:
\documentclass[pdftex,openany,11pt,twoside,a4dutch]{report}
\usepackage{uarial}
\usepackage{csquotes}
\usepackage[ngerman]{babel}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{csquotes} % Setzen von Anführungsstrichen
\begin{document}
This is a test.
\end{document}
and here is the Error:
! LaTeX Error: File `uarial.sty' not found.Type X to quit or <RETURN> to proceed,or enter new name. (Default extension: sty)Enter file name:! Emergency stop.<read > \usepackage
But the folder arial and the file arial.sty are in the above mentioned folder.
In the MikTeX-Console I already entered the folder to Directories > Settings
I thankful for every help!
Thanks and greetings!
Here is the log-file from TexMaker:
This is pdfTeX, Version 3.14159265-2.6-1.40.20 (TeX Live 2019) (preloaded format=pdflatex 2019.10.27) 27 OCT 2019 13:34
entering extended mode
restricted \write18 enabled.
%&-line parsing enabled.
**test.tex
(./test.tex
LaTeX2e <2018-12-01>
(/usr/local/texlive/2019/texmf-dist/tex/latex/base/report.cls
Document Class: report 2018/09/03 v1.4i Standard LaTeX document class
(/usr/local/texlive/2019/texmf-dist/tex/latex/base/size11.clo
File: size11.clo 2018/09/03 v1.4i Standard LaTeX file (size option)
)
\c#part=\count80
\c#chapter=\count81
\c#section=\count82
\c#subsection=\count83
\c#subsubsection=\count84
\c#paragraph=\count85
\c#subparagraph=\count86
\c#figure=\count87
\c#table=\count88
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
)
! LaTeX Error: File `uarial.sty' not found.
Type X to quit or <RETURN> to proceed,
or enter new name. (Default extension: sty)
Enter file name:
! Emergency stop.
<read *>
l.5 \usepackage
{csquotes}^^M
*** (cannot \read from terminal in nonstop modes)
Here is how much of TeX's memory you used:
221 strings out of 492616
2365 string characters out of 6129480
60608 words of memory out of 5000000
4231 multiletter control sequences out of 15000+600000
3940 words of font info for 15 fonts, out of 8000000 for 9000
1141 hyphenation exceptions out of 8191
21i,0n,22p,110b,36s stack positions out of 5000i,500n,10000p,200000b,80000s
! ==> Fatal error occurred, no output PDF file produced!
As you can see from the first line of the log file
This is pdfTeX, Version 3.14159265-2.6-1.40.20 (TeX Live 2019)
texmaker is not using the miktex distribution for which you installed the uarial package, but a texlive distribution which seems to be also installed on your computer. In the long run it would be best to only have a single tex distribution on your computer to avoid such problems. For mac I would suggest to keep the texlive distribution and get rid of miktex, because texlive is used by most mac users and therefore well tested compared to miktex for mac.
Now you could force texmaker to use your miktex installation by modifying the texmaker preferences, but the easier way to use Arial in your document is to switch from pdflatex to xelatex or lualatex and directly use the arial font installed on your computer
% !TeX TS-program = xelatex
\documentclass[openany,11pt,twoside,a4dutch]{report}
\usepackage{fontspec}
\setmainfont{Arial}
\usepackage[ngerman]{babel}
\usepackage[utf8]{inputenc}
\usepackage{csquotes}
\begin{document}
This is a test.
\end{document}
Running chef-solo (Installing Chef Omnibus (12.3)) on centos6.6
My recipe has the following simple code:
package 'cloud-init' do
action :install
end
log 'rpm-qi' do
message `rpm -qi cloud-init`
level :warn
end
log 'yum list' do
message `yum list cloud-init`
level :warn
end
But it outputs the following:
- install version 0.7.5-10.el6.centos.2 of package cloud-init
* log[rpm-qi] action write[2015-07-16T16:46:35+00:00] WARN: package cloud-init is not installed
[2015-07-16T16:46:35+00:00] WARN: Loaded plugins: fastestmirror, presto
Available Packages
cloud-init.x86_64 0.7.5-10.el6.centos.2 extras
I am at a loss as to why rpm/yum and actually rpmquery don't see the package as installed.
EDIT: To clarify I am specifically looking for the following string post package install to then apply a change to the file (I understand this is not a very chef way to do something I am happy to accept suggestions):
rpmquery -l cloud-init | grep 'distros/__init__.py$'
I have found that by using the following:
install_report = shell_out('yum install -y cloud-init').stdout
cloudinit_source = shell_out("rpmquery -l cloud-init | grep 'distros/__init__.py$'").stdout
I can then get the file I am looking for and perform
Chef::Util::FileEdit.new(cloudinit_source.chomp(''))
The file moves based on the distribution but I need to edit that file specifically with in place changes.
Untested code, just to give the idea:
package 'cloud-init' do
action :install
notifies :run,"ruby_block[update_cloud_init]"
end
ruby_block 'update_cloud_init' do
block do
cloudinit_source = shell_out("rpmquery -l cloud-init | grep 'distros/__init__.py$'").stdout
rc = Chef::Util::FileEdit.new(cloudinit_source.chomp(''))
rc.search_file_replace_line(/^what to find$/,
"replacement datas for the line")
rc.write_file
end
end
ruby_block example taken and adapted from here
I would better go using a template to manage the whole file, what I don't understand is why you don't know where it will be at first...
Previous answer
I assume it's a compile vs converge problem. at the time the message is stored (and so your command is executed) the package is not already installed.
Chef run in two phase, compile then converge.
At compile time it build a collection of resources and at converge time it execute code for the resource to get them in the described state.
When your log resource is compiled, the ugly back-ticks are evaluated, at this time there's a package resource in the collection but the resource has not been executed, so the output is correct.
I don't understand what you want to achieve with those log resources at all.
If you want to test your node state after chef-run use a handler maybe calling ServerSpec as in Test-Kitchen.
I have configured a private APT repository (using resources on internet like http://inodes.org/2009/09/14/building-a-private-ppa-on-ubuntu/) and I'm uploading for the first time my package containing the sources of my C++ application.
So reprepro repository is empty.
I use the following command in order to start the build:
sudo reprepro -V -b /srv/reprepro processincoming incoming
Then the build start, a lot of output is genearated and I can see that pbuilder is compiling the project source code and everything is fine. I can even find in the result/ folder debian packages etc...
But the build failed with a POST_BUILD_FAILED because it seems that pbuilder has changed the douane-testing_0.8.1-apt1.debian.tar.gz file and the md5 sum is now different as shown here:
File "pool/main/d/douane-testing/douane-testing_0.8.1-apt1.debian.tar.gz" is already registered with different checksums!
md5 expected: 97257ae2c5790b84ed7bb1b412f1d518, got: df78f88b97cadc10bc0a73bf86442838
sha1 expected: ae93c44593e821696f72bee4d91ce4b6f261e529, got: d6f910ca5707ec92cb71601a4f4c72db0e5f18d9
sha256 expected: c3fac5ed112f89a8ed8d4137b34f173990d8a4b82b6212d1e0ada1cddc869b0e, got: ebdcc9ead44ea0dd99f2dc87decffcc5e3efaee64a8f62f54aec556ac19d579c
size expected: 2334, got: 2344
There have been errors!
I don't understand why it is failing as when I compare the 2 packages (having those md5 sums) the content is strictly the same (I used a diff tool but no differences and no new or removed files).
The only thing I can see is that the archive from pbuild is bigger of 10 Bytes than the orginal one I have uploaded:
On my development machine, the file with the md5 97257ae2c5790b84ed7bb1b412f1d518 :
-rw-r--r-- 1 zedtux zedtux 2334 Feb 3 23:38 douane-testing_0.8.1-apt1.debian.tar.gz
On my server, the file with the md5 df78f88b97cadc10bc0a73bf86442838 :
-rw-r--r-- 1 root root 2344 Feb 5 00:58 douane-testing_0.8.1-apt1.debian.tar.gz
I have pbuild version 0.213 on my server.
What could be the reason of this behavior and how can I fix it ?
Edit
I'm suspecting an issue with the GPG key which looks missing and then files aren't signed so md5sum is different.
During the build process I have the following lines:
I: Extracting source
gpgv: Signature made Wed Feb 5 22:04:37 2014 UTC using RSA key ID 9474CF36
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./douane-testing_0.8.1-apt1.dsc
Edit 2
I have tried to find the command to create manually the .debian.tar.gz file.
The best I've found is the following:
tar cv debian | gzip --no-name --rsyncable -9 > douane-testing_0.8.1-apt1.debian.tar.gz
I don't get the same result than dpkg-source but I tried the same command on my server (I should at least have the same size) but it's not matching...
Could it be that Debian and Ubuntu aren't compressing the same way ?
Finally after some evenings of research I found the solution on launchpad.net !
Found the solution. By default pbuilder calls dpkg-buildpackage like so:
DEBBUILDOPTS="$DEBBUILDOPTS -rfakeroot"
dpkg-buildpackage -us -uc $DEBBUILDOPTS
That causes dpkg-buildpackage to rebuild the diff.gz and .dsc files. Add a -b in there, and it won't. It also means the resulting .changes file will only reference the .deb file. Which is what you want, I think.
The easy solution is to add a line to your .pbuilderrc:
DEBBUILDOPTS="-b"
My previous answer is alright but is not complete.
Then I had the issue that reprepro complains about the source tarball (.orig.tar.xz).
But it was normal as I wasn't doing the packages correctly.
I have written a bash script which I'm executing in VM for each Ubuntu series.
This script was always doing everything from scratch, and was using dh_make --createorig argument and here is the issue.
The correct way is to generate once (for example on Ubuntu precise) and then re-use the .orig.tar.xz file and no more use the --createorig argument of dh_make.
I hope this could help someone :-)
I'm new in cocos2d-x. I started setting up environment for developing.
I download the cocos2d-x-2.1.5 zip file and extracted. Then I double click on build-win32.bat, these line apppeared :
Build started 8/28/2013 9:08:01 AM.
0>D:\Dev_cocos2dx\cocos2d-x-2.1.5\cocos2d-win32.vc2012.sln : Solution file error MSB5009: Erro
r parsing the nested project section in solution file.
Build FAILED.
D:\Dev_cocos2dx\cocos2d-x-2.1.5\cocos2d-win32.vc2012.sln : Solution file error MSB5009: Er
ror parsing the nested project section in solution file.
0 Warning(s)
1 Error(s)
Time Elapsed 00:00:00.01
Microsoft (R) Build Engine version 4.0.30319.17929
[Microsoft .NET Framework, version 4.0.30319.18052]
Copyright (C) Microsoft Corporation. All rights reserved.
Build started 8/28/2013 9:08:01 AM.
0>D:\Dev_cocos2dx\cocos2d-x-2.1.5\cocos2d-win32.vc2012.sln : Solution file error MSB5009: Erro
r parsing the nested project section in solution file.
Build FAILED.
D:\Dev_cocos2dx\cocos2d-x-2.1.5\cocos2d-win32.vc2012.sln : Solution file error MSB5009: Er
ror parsing the nested project section in solution file.
0 Warning(s)
1 Error(s)
Time Elapsed 00:00:00.01
/*
* Check the cocos2d-win32 application "TestCpp.exe" ...
*/
The system cannot find the path specified.
/*
* Run cocos2d-win32 tests.exe and view Cocos2d-x Application Wizard for Visual Studio User Guide.
*/
File not found - Resources
0 File(s) copied
File not found - Resources
0 File(s) copied
File not found - Resources
0 File(s) copied
File not found - Resources
0 File(s) copied
File not found - Resources
0 File(s) copied
File not found - js
0 File(s) copied
File not found - tests
0 File(s) copied
File not found - MoonWarriors
0 File(s) copied
File not found - WatermelonWithMe
0 File(s) copied
File not found - Published files iOS
0 File(s) copied
Can't find the binary "TestCpp.exe", is there build error?
Press any key to continue . . .
I'm using windows 7 64bit .
Thanks!
I found a solution:
1.Open the "cocos2d-win32.vc2010.sln".
2.Create a new project.
3.Delete the project of step 2.
4.Close .sln file, click save.
After these steps, my batch file works well. Hope it is useful for you.
I am working with the build /Release process,We implement the build system using the one host machine which has two Virtual machines.One is windows virtual machine and other Linux.During the build we are invoking Nightly.bat file from Windows vm and Nightly.sh from Linux .Iam using the following command...
start /b vmrun.exe -T ws -gu "End" -gp Password runProgramInGuest "D:\Windows VM\Windows 7 x64 Edition + Visual Studio 2008\Windows 7 x64 Edition.vmx" -activeWindow "C:\SPSBuild\Nightly.bat"
vmrun.exe -T ws -gu root -gp quasar runProgramInGuest "D:\Linux\RHEL 5.3 64-bit\RHEL 5.3 64-bit - Sreejith.vmx" "/home/quasar/workspace/SPSBuild/Nightlynew.sh"
But I got an error which shows "Guest program exited with non-zero exit code: 1"..
The username ,password and the path is correct.
Anybody have any idea about that...please give me an answer..
It seems like either "C:\SPSBuild\Nightly.bat" or "/home/quasar/workspace/SPSBuild/Nightlynew.sh" is failing and returning an error.
Can you run these scripts manually to see if they produce an error message? Can you read the scripts to determine why they return exit code 1?
The file must exists in the guest machine. If it does not exists, you need to use copyFileFromHostToGuest before runProgramInguest.