Related
I want to create an index on a column such that the select statement require min time to retrieve the data. The column is unique and if data is physically sorted, query will be faster. Which index would you use?.
Clustered
Non-Clustered
Unique
Composite
I think the clustered index is the right answer here.
It sorts the data physically to get better performance.
Wikipedia says:
Clustered indices can greatly increase overall speed of retrieval, but usually only where the data is accessed sequentially in the same or reverse order of the clustered index, or when a range of items is selected.
Since the physical records are in this sort order on disk, the next row item in the sequence is immediately before or after the last one, and so fewer data block reads are required.
Some SO questions that might help to understand the topic:
When should I use a composite index?
Primary key or Unique index?
What do Clustered and Non clustered index actually mean?
Recently I found a couple of tables in a Database with no Clustered Indexes defined.
But there are non-clustered indexes defined, so they are on HEAP.
On analysis I found that select statements were using filter on the columns defined in non-clustered indexes.
Not having a clustered index on these tables affect performance?
It's hard to state this more succinctly than SQL Server MVP Brad McGehee:
As a rule of thumb, every table should have a clustered index. Generally, but not always, the clustered index should be on a column that monotonically increases–such as an identity column, or some other column where the value is increasing–and is unique. In many cases, the primary key is the ideal column for a clustered index.
BOL echoes this sentiment:
With few exceptions, every table should have a clustered index.
The reasons for doing this are many and are primarily based upon the fact that a clustered index physically orders your data in storage.
If your clustered index is on a single column monotonically increases, inserts occur in order on your storage device and page splits will not happen.
Clustered indexes are efficient for finding a specific row when the indexed value is unique, such as the common pattern of selecting a row based upon the primary key.
A clustered index often allows for efficient queries on columns that are often searched for ranges of values (between, >, etc.).
Clustering can speed up queries where data is commonly sorted by a specific column or columns.
A clustered index can be rebuilt or reorganized on demand to control table fragmentation.
These benefits can even be applied to views.
You may not want to have a clustered index on:
Columns that have frequent data changes, as SQL Server must then physically re-order the data in storage.
Columns that are already covered by other indexes.
Wide keys, as the clustered index is also used in non-clustered index lookups.
GUID columns, which are larger than identities and also effectively random values (not likely to be sorted upon), though newsequentialid() could be used to help mitigate physical reordering during inserts.
A rare reason to use a heap (table without a clustered index) is if the data is always accessed through nonclustered indexes and the RID (SQL Server internal row identifier) is known to be smaller than a clustered index key.
Because of these and other considerations, such as your particular application workloads, you should carefully select your clustered indexes to get maximum benefit for your queries.
Also note that when you create a primary key on a table in SQL Server, it will by default create a unique clustered index (if it doesn't already have one). This means that if you find a table that doesn't have a clustered index, but does have a primary key (as all tables should), a developer had previously made the decision to create it that way. You may want to have a compelling reason to change that (of which there are many, as we've seen). Adding, changing or dropping the clustered index requires rewriting the entire table and any non-clustered indexes, so this can take some time on a large table.
I would not say "Every table should have a clustered index", I would say "Look carefully at every table and how they are accessed and try to define a clustered index on it if it makes sense". It's a plus, like a Joker, you have only one Joker per table, but you don't have to use it. Other database systems don't have this, at least in this form, BTW.
Putting clustered indices everywhere without understanding what you're doing can also kill your performance (in general, the INSERT performance because a clustered index means physical re-ordering on the disk, or at least it's a good way to understand it), for example with GUID primary keys as we see more and more.
So, read Tim Lehner's exceptions and reason.
Performance is a big hairy problem. Make sure you are optimizing for the right thing.
Free advice is always worth it's price, and there is no substitute for actual experimentation.
The purpose of an index is to find matching rows and help retrieve the data when found.
A non-clustered index on your search criteria will help to find rows, but there needs to be additional operation to get at the row's data.
If there is no clustered index, SQL uses an internal rowId to point to the location of the data.
However, If there is a clustered index on the table, that rowId is replaced by the data values in the clustered index.
So the step of reading the rows data would not be needed, and would be covered by the values in the index.
Even if a clustered index isn't very good at being selective, if those keys are frequently most or all of the results requested - it may be helpful to have them as the leaf of the non-clustered index.
Yes you should have clustered index on a table.So that all nonclustered indexes perform in better way.
Consider using a clustered index when Columns that contain a large number of distinct values so to avoid the need for SQL Server to add a "uniqueifier" to duplicate key values
Disadvantage : It takes longer to update records if only when the fields in the clustering index are changed.
Avoid clustering index constructions where there is a risk that many concurrent inserts will happen on almost the same clustering index value
Searches against a nonclustered index will appear slower is the clustered index isn't build correctly, or it does not include all the columns needed to return the data back to the calling application. In the event that the non-clustered index doesn't contain all the needed data then the SQL Server will go to the clustered index to get the missing data (via a lookup) which will make the query run slower as the lookup is done row by row.
Yes, every table should have a clustered index. The clustered index sets the physical order of data in a table. You can compare this to the ordering of music at a store, by bands name and or Yellow pages ordered by a last name. Since this deals with the physical order you can have only one it can be comprised by many columns but you can only have one.
It’s best to place the clustered index on columns often searched for a range of values. Example would be a date range. Clustered indexes are also efficient for finding a specific row when the indexed value is unique. Microsoft SQL will place clustered indexes on a PRIMARY KEY constraint automatically if no clustered indexes are defined.
Clustered indexes are not a good choice for:
Columns that undergo frequent changes
This results in the entire row moving (because SQL Server must keep
the data values of a row in physical order). This is an important
consideration in high-volume transaction processing systems where
data tends to be volatile.
Wide keys
The key values from the clustered index are used by all
nonclustered indexes as lookup keys and therefore are stored in each
nonclustered index leaf entry.
This question already has answers here:
What are the differences between a clustered and a non-clustered index?
(13 answers)
Closed 7 years ago.
I need to add proper index to my tables and need some help.
I'm confused and need to clarify a few points:
Should I use index for non-int columns? Why/why not
I've read a lot about clustered and non-clustered index yet I still can't decide when to use one over the other. A good example would help me and a lot of other developers.
I know that I shouldn't use indexes for columns or tables that are often updated. What else should I be careful about and how can I know that it is all good before going to test phase?
A clustered index alters the way that the rows are stored. When you create a clustered index on a column (or a number of columns), SQL server sorts the table’s rows by that column(s). It is like a dictionary, where all words are sorted in alphabetical order in the entire book.
A non-clustered index, on the other hand, does not alter the way the rows are stored in the table. It creates a completely different object within the table that contains the column(s) selected for indexing and a pointer back to the table’s rows containing the data. It is like an index in the last pages of a book, where keywords are sorted and contain the page number to the material of the book for faster reference.
You really need to keep two issues apart:
1) the primary key is a logical construct - one of the candidate keys that uniquely and reliably identifies every row in your table. This can be anything, really - an INT, a GUID, a string - pick what makes most sense for your scenario.
2) the clustering key (the column or columns that define the "clustered index" on the table) - this is a physical storage-related thing, and here, a small, stable, ever-increasing data type is your best pick - INT or BIGINT as your default option.
By default, the primary key on a SQL Server table is also used as the clustering key - but that doesn't need to be that way!
One rule of thumb I would apply is this: any "regular" table (one that you use to store data in, that is a lookup table etc.) should have a clustering key. There's really no point not to have a clustering key. Actually, contrary to common believe, having a clustering key actually speeds up all the common operations - even inserts and deletes (since the table organization is different and usually better than with a heap - a table without a clustering key).
Kimberly Tripp, the Queen of Indexing has a great many excellent articles on the topic of why to have a clustering key, and what kind of columns to best use as your clustering key. Since you only get one per table, it's of utmost importance to pick the right clustering key - and not just any clustering key.
GUIDs as PRIMARY KEY and/or clustered key
The clustered index debate continues
Ever-increasing clustering key - the Clustered Index Debate..........again!
Disk space is cheap - that's not the point!
Marc
You should be using indexes to help SQL server performance. Usually that implies that columns that are used to find rows in a table are indexed.
Clustered indexes makes SQL server order the rows on disk according to the index order. This implies that if you access data in the order of a clustered index, then the data will be present on disk in the correct order. However if the column(s) that have a clustered index is frequently changed, then the row(s) will move around on disk, causing overhead - which generally is not a good idea.
Having many indexes is not good either. They cost to maintain. So start out with the obvious ones, and then profile to see which ones you miss and would benefit from. You do not need them from start, they can be added later on.
Most column datatypes can be used when indexing, but it is better to have small columns indexed than large. Also it is common to create indexes on groups of columns (e.g. country + city + street).
Also you will not notice performance issues until you have quite a bit of data in your tables. And another thing to think about is that SQL server needs statistics to do its query optimizations the right way, so make sure that you do generate that.
A comparison of a non-clustered index with a clustered index with an example
As an example of a non-clustered index, let’s say that we have a non-clustered index on the EmployeeID column. A non-clustered index will store both the value of the
EmployeeID
AND a pointer to the row in the Employee table where that value is actually stored. But a clustered index, on the other hand, will actually store the row data for a particular EmployeeID – so if you are running a query that looks for an EmployeeID of 15, the data from other columns in the table like
EmployeeName, EmployeeAddress, etc
. will all actually be stored in the leaf node of the clustered index itself.
This means that with a non-clustered index extra work is required to follow that pointer to the row in the table to retrieve any other desired values, as opposed to a clustered index which can just access the row directly since it is being stored in the same order as the clustered index itself. So, reading from a clustered index is generally faster than reading from a non-clustered index.
In general, use an index on a column that's going to be used (a lot) to search the table, such as a primary key (which by default has a clustered index). For example, if you have the query (in pseudocode)
SELECT * FROM FOO WHERE FOO.BAR = 2
You might want to put an index on FOO.BAR. A clustered index should be used on a column that will be used for sorting. A clustered index is used to sort the rows on disk, so you can only have one per table. For example if you have the query
SELECT * FROM FOO ORDER BY FOO.BAR ASCENDING
You might want to consider a clustered index on FOO.BAR.
Probably the most important consideration is how much time your queries are taking. If a query doesn't take much time or isn't used very often, it may not be worth adding indexes. As always, profile first, then optimize. SQL Server Studio can give you suggestions on where to optimize, and MSDN has some information1 that you might find useful
faster to read than non cluster as data is physically storted in index order
we can create only one per table.(cluster index)
quicker for insert and update operation than a cluster index.
we can create n number of non cluster index.
I have a limited exposure to DB and have only used DB as an application programmer. I want to know about Clustered and Non clustered indexes.
I googled and what I found was :
A clustered index is a special type of index that reorders the way
records in the table are physically
stored. Therefore table can have only
one clustered index. The leaf nodes
of a clustered index contain the data
pages. A nonclustered index is a
special type of index in which the
logical order of the index does not
match the physical stored order of
the rows on disk. The leaf node of a
nonclustered index does not consist of
the data pages. Instead, the leaf
nodes contain index rows.
What I found in SO was What are the differences between a clustered and a non-clustered index?.
Can someone explain this in plain English?
With a clustered index the rows are stored physically on the disk in the same order as the index. Therefore, there can be only one clustered index.
With a non clustered index there is a second list that has pointers to the physical rows. You can have many non clustered indices, although each new index will increase the time it takes to write new records.
It is generally faster to read from a clustered index if you want to get back all the columns. You do not have to go first to the index and then to the table.
Writing to a table with a clustered index can be slower, if there is a need to rearrange the data.
A clustered index means you are telling the database to store close values actually close to one another on the disk. This has the benefit of rapid scan / retrieval of records falling into some range of clustered index values.
For example, you have two tables, Customer and Order:
Customer
----------
ID
Name
Address
Order
----------
ID
CustomerID
Price
If you wish to quickly retrieve all orders of one particular customer, you may wish to create a clustered index on the "CustomerID" column of the Order table. This way the records with the same CustomerID will be physically stored close to each other on disk (clustered) which speeds up their retrieval.
P.S. The index on CustomerID will obviously be not unique, so you either need to add a second field to "uniquify" the index or let the database handle that for you but that's another story.
Regarding multiple indexes. You can have only one clustered index per table because this defines how the data is physically arranged. If you wish an analogy, imagine a big room with many tables in it. You can either put these tables to form several rows or pull them all together to form a big conference table, but not both ways at the same time. A table can have other indexes, they will then point to the entries in the clustered index which in its turn will finally say where to find the actual data.
In SQL Server, row-oriented storage both clustered and nonclustered indexes are organized as B trees.
(Image Source)
The key difference between clustered indexes and non clustered indexes is that the leaf level of the clustered index is the table. This has two implications.
The rows on the clustered index leaf pages always contain something for each of the (non-sparse) columns in the table (either the value or a pointer to the actual value).
The clustered index is the primary copy of a table.
Non clustered indexes can also do point 1 by using the INCLUDE clause (Since SQL Server 2005) to explicitly include all non-key columns but they are secondary representations and there is always another copy of the data around (the table itself).
CREATE TABLE T
(
A INT,
B INT,
C INT,
D INT
)
CREATE UNIQUE CLUSTERED INDEX ci ON T(A, B)
CREATE UNIQUE NONCLUSTERED INDEX nci ON T(A, B) INCLUDE (C, D)
The two indexes above will be nearly identical. With the upper-level index pages containing values for the key columns A, B and the leaf level pages containing A, B, C, D
There can be only one clustered index per table, because the data rows
themselves can be sorted in only one order.
The above quote from SQL Server books online causes much confusion
In my opinion, it would be much better phrased as.
There can be only one clustered index per table because the leaf level rows of the clustered index are the table rows.
The book's online quote is not incorrect but you should be clear that the "sorting" of both non clustered and clustered indices is logical, not physical. If you read the pages at leaf level by following the linked list and read the rows on the page in slot array order then you will read the index rows in sorted order but physically the pages may not be sorted. The commonly held belief that with a clustered index the rows are always stored physically on the disk in the same order as the index key is false.
This would be an absurd implementation. For example, if a row is inserted into the middle of a 4GB table SQL Server does not have to copy 2GB of data up in the file to make room for the newly inserted row.
Instead, a page split occurs. Each page at the leaf level of both clustered and non clustered indexes has the address (File: Page) of the next and previous page in logical key order. These pages need not be either contiguous or in key order.
e.g. the linked page chain might be 1:2000 <-> 1:157 <-> 1:7053
When a page split happens a new page is allocated from anywhere in the filegroup (from either a mixed extent, for small tables or a non-empty uniform extent belonging to that object or a newly allocated uniform extent). This might not even be in the same file if the filegroup contains more than one.
The degree to which the logical order and contiguity differ from the idealized physical version is the degree of logical fragmentation.
In a newly created database with a single file, I ran the following.
CREATE TABLE T
(
X TINYINT NOT NULL,
Y CHAR(3000) NULL
);
CREATE CLUSTERED INDEX ix
ON T(X);
GO
--Insert 100 rows with values 1 - 100 in random order
DECLARE #C1 AS CURSOR,
#X AS INT
SET #C1 = CURSOR FAST_FORWARD
FOR SELECT number
FROM master..spt_values
WHERE type = 'P'
AND number BETWEEN 1 AND 100
ORDER BY CRYPT_GEN_RANDOM(4)
OPEN #C1;
FETCH NEXT FROM #C1 INTO #X;
WHILE ##FETCH_STATUS = 0
BEGIN
INSERT INTO T (X)
VALUES (#X);
FETCH NEXT FROM #C1 INTO #X;
END
Then checked the page layout with
SELECT page_id,
X,
geometry::Point(page_id, X, 0).STBuffer(1)
FROM T
CROSS APPLY sys.fn_PhysLocCracker( %% physloc %% )
ORDER BY page_id
The results were all over the place. The first row in key order (with value 1 - highlighted with an arrow below) was on nearly the last physical page.
Fragmentation can be reduced or removed by rebuilding or reorganizing an index to increase the correlation between logical order and physical order.
After running
ALTER INDEX ix ON T REBUILD;
I got the following
If the table has no clustered index it is called a heap.
Non clustered indexes can be built on either a heap or a clustered index. They always contain a row locator back to the base table. In the case of a heap, this is a physical row identifier (rid) and consists of three components (File:Page: Slot). In the case of a Clustered index, the row locator is logical (the clustered index key).
For the latter case if the non clustered index already naturally includes the CI key column(s) either as NCI key columns or INCLUDE-d columns then nothing is added. Otherwise, the missing CI key column(s) silently gets added to the NCI.
SQL Server always ensures that the key columns are unique for both types of indexes. The mechanism in which this is enforced for indexes not declared as unique differs between the two index types, however.
Clustered indexes get a uniquifier added for any rows with key values that duplicate an existing row. This is just an ascending integer.
For non clustered indexes not declared as unique SQL Server silently adds the row locator into the non clustered index key. This applies to all rows, not just those that are actually duplicates.
The clustered vs non clustered nomenclature is also used for column store indexes. The paper Enhancements to SQL Server Column Stores states
Although column store data is not really "clustered" on any key, we
decided to retain the traditional SQL Server convention of referring
to the primary index as a clustered index.
I realize this is a very old question, but I thought I would offer an analogy to help illustrate the fine answers above.
CLUSTERED INDEX
If you walk into a public library, you will find that the books are all arranged in a particular order (most likely the Dewey Decimal System, or DDS). This corresponds to the "clustered index" of the books. If the DDS# for the book you want was 005.7565 F736s, you would start by locating the row of bookshelves that is labeled 001-099 or something like that. (This endcap sign at the end of the stack corresponds to an "intermediate node" in the index.) Eventually you would drill down to the specific shelf labelled 005.7450 - 005.7600, then you would scan until you found the book with the specified DDS#, and at that point you have found your book.
NON-CLUSTERED INDEX
But if you didn't come into the library with the DDS# of your book memorized, then you would need a second index to assist you. In the olden days you would find at the front of the library a wonderful bureau of drawers known as the "Card Catalog". In it were thousands of 3x5 cards -- one for each book, sorted in alphabetical order (by title, perhaps). This corresponds to the "non-clustered index". These card catalogs were organized in a hierarchical structure, so that each drawer would be labeled with the range of cards it contained (Ka - Kl, for example; i.e., the "intermediate node"). Once again, you would drill in until you found your book, but in this case, once you have found it (i.e, the "leaf node"), you don't have the book itself, but just a card with an index number (the DDS#) with which you could find the actual book in the clustered index.
Of course, nothing would stop the librarian from photocopying all the cards and sorting them in a different order in a separate card catalog. (Typically there were at least two such catalogs: one sorted by author name, and one by title.) In principle, you could have as many of these "non-clustered" indexes as you want.
Find below some characteristics of clustered and non-clustered indexes:
Clustered Indexes
Clustered indexes are indexes that uniquely identify the rows in an SQL table.
Every table can have exactly one clustered index.
You can create a clustered index that covers more than one column. For example: create Index index_name(col1, col2, col.....).
By default, a column with a primary key already has a clustered index.
Non-clustered Indexes
Non-clustered indexes are like simple indexes. They are just used for fast retrieval of data. Not sure to have unique data.
Clustered Index
A clustered index determines the physical order of DATA in a table. For this reason, a table has only one clustered index(Primary key/composite key).
"Dictionary" No need of any other Index, its already Index according to words
Nonclustered Index
A non-clustered index is analogous to an index in a Book. The data is stored in one place. The index is stored in another place and the index has pointers to the storage location. this help in the fast search of data. For this reason, a table has more than 1 Nonclustered index.
"Biology Book" at starting there is a separate index to point Chapter location and At the "END" there is another Index pointing the common WORDS location
A very simple, non-technical rule-of-thumb would be that clustered indexes are usually used for your primary key (or, at least, a unique column) and that non-clustered are used for other situations (maybe a foreign key). Indeed, SQL Server will by default create a clustered index on your primary key column(s). As you will have learnt, the clustered index relates to the way data is physically sorted on disk, which means it's a good all-round choice for most situations.
Clustered Index
A Clustered Index is basically a tree-organized table. Instead of storing the records in an unsorted Heap table space, the clustered index is actually B+Tree index having the Leaf Nodes, which are ordered by the clusters key column value, store the actual table records, as illustrated by the following diagram.
The Clustered Index is the default table structure in SQL Server and MySQL. While MySQL adds a hidden clusters index even if a table doesn't have a Primary Key, SQL Server always builds a Clustered Index if a table has a Primary Key column. Otherwise, the SQL Server is stored as a Heap Table.
The Clustered Index can speed up queries that filter records by the clustered index key, like the usual CRUD statements. Since the records are located in the Leaf Nodes, there's no additional lookup for extra column values when locating records by their Primary Key values.
For example, when executing the following SQL query on SQL Server:
SELECT PostId, Title
FROM Post
WHERE PostId = ?
You can see that the Execution Plan uses a Clustered Index Seek operation to locate the Leaf Node containing the Post record, and there are only two logical reads required to scan the Clustered Index nodes:
|StmtText |
|-------------------------------------------------------------------------------------|
|SELECT PostId, Title FROM Post WHERE PostId = #P0 |
| |--Clustered Index Seek(OBJECT:([high_performance_sql].[dbo].[Post].[PK_Post_Id]), |
| SEEK:([high_performance_sql].[dbo].[Post].[PostID]=[#P0]) ORDERED FORWARD) |
Table 'Post'. Scan count 0, logical reads 2, physical reads 0
Non-Clustered Index
Since the Clustered Index is usually built using the Primary Key column values, if you want to speed up queries that use some other column, then you'll have to add a Secondary Non-Clustered Index.
The Secondary Index is going to store the Primary Key value in its Leaf Nodes, as illustrated by the following diagram:
So, if we create a Secondary Index on the Title column of the Post table:
CREATE INDEX IDX_Post_Title on Post (Title)
And we execute the following SQL query:
SELECT PostId, Title
FROM Post
WHERE Title = ?
We can see that an Index Seek operation is used to locate the Leaf Node in the IDX_Post_Title index that can provide the SQL query projection we are interested in:
|StmtText |
|------------------------------------------------------------------------------|
|SELECT PostId, Title FROM Post WHERE Title = #P0 |
| |--Index Seek(OBJECT:([high_performance_sql].[dbo].[Post].[IDX_Post_Title]),|
| SEEK:([high_performance_sql].[dbo].[Post].[Title]=[#P0]) ORDERED FORWARD)|
Table 'Post'. Scan count 1, logical reads 2, physical reads 0
Since the associated PostId Primary Key column value is stored in the IDX_Post_Title Leaf Node, this query doesn't need an extra lookup to locate the Post row in the Clustered Index.
Clustered Index
Clustered indexes sort and store the data rows in the table or view based on their key values. These are the columns included in the index definition. There can be only one clustered index per table, because the data rows themselves can be sorted in only one order.
The only time the data rows in a table are stored in sorted order is when the table contains a clustered index. When a table has a clustered index, the table is called a clustered table. If a table has no clustered index, its data rows are stored in an unordered structure called a heap.
Nonclustered
Nonclustered indexes have a structure separate from the data rows. A nonclustered index contains the nonclustered index key values and each key value entry has a pointer to the data row that contains the key value.
The pointer from an index row in a nonclustered index to a data row is called a row locator. The structure of the row locator depends on whether the data pages are stored in a heap or a clustered table. For a heap, a row locator is a pointer to the row. For a clustered table, the row locator is the clustered index key.
You can add nonkey columns to the leaf level of the nonclustered index to by-pass existing index key limits, and execute fully covered, indexed, queries. For more information, see Create Indexes with Included Columns. For details about index key limits see Maximum Capacity Specifications for SQL Server.
Reference: https://learn.microsoft.com/en-us/sql/relational-databases/indexes/clustered-and-nonclustered-indexes-described
Let me offer a textbook definition on "clustering index", which is taken from 15.6.1 from Database Systems: The Complete Book:
We may also speak of clustering indexes, which are indexes on an attribute or attributes such that all of tuples with a fixed value for the search key of this index appear on roughly as few blocks as can hold them.
To understand the definition, let's take a look at Example 15.10 provided by the textbook:
A relation R(a,b) that is sorted on attribute a and stored in that
order, packed into blocks, is surely clusterd. An index on a is a
clustering index, since for a given a-value a1, all the tuples with
that value for a are consecutive. They thus appear packed into
blocks, execept possibly for the first and last blocks that contain
a-value a1, as suggested in Fig.15.14. However, an index on b is
unlikely to be clustering, since the tuples with a fixed b-value
will be spread all over the file unless the values of a and b are
very closely correlated.
Note that the definition does not enforce the data blocks have to be contiguous on the disk; it only says tuples with the search key are packed into as few data blocks as possible.
A related concept is clustered relation. A relation is "clustered" if its tuples are packed into roughly as few blocks as can possibly hold those tuples. In other words, from a disk block perspective, if it contains tuples from different relations, then those relations cannot be clustered (i.e., there is a more packed way to store such relation by swapping the tuples of that relation from other disk blocks with the tuples the doesn't belong to the relation in the current disk block). Clearly, R(a,b) in example above is clustered.
To connect two concepts together, a clustered relation can have a clustering index and nonclustering index. However, for non-clustered relation, clustering index is not possible unless the index is built on top of the primary key of the relation.
"Cluster" as a word is spammed across all abstraction levels of database storage side (three levels of abstraction: tuples, blocks, file). A concept called "clustered file", which describes whether a file (an abstraction for a group of blocks (one or more disk blocks)) contains tuples from one relation or different relations. It doesn't relate to the clustering index concept as it is on file level.
However, some teaching material likes to define clustering index based on the clustered file definition. Those two types of definitions are the same on clustered relation level, no matter whether they define clustered relation in terms of data disk block or file. From the link in this paragraph,
An index on attribute(s) A on a file is a clustering index when: All tuples with attribute value A = a are stored sequentially (= consecutively) in the data file
Storing tuples consecutively is the same as saying "tuples are packed into roughly as few blocks as can possibly hold those tuples" (with minor difference on one talking about file, the other talking about disk). It's because storing tuple consecutively is the way to achieve "packed into roughly as few blocks as can possibly hold those tuples".
Clustered Index:
Primary Key constraint creates clustered Index automatically if no clustered Index already exists on the table. Actual data of clustered index can be stored at leaf level of Index.
Non Clustered Index:
Actual data of non clustered index is not directly found at leaf node, instead it has to take an additional step to find because it has only values of row locators pointing towards actual data.
Non clustered Index can't be sorted as clustered index. There can be multiple non clustered indexes per table, actually it depends on the sql server version we are using. Basically Sql server 2005 allows 249 Non Clustered Indexes and for above versions like 2008, 2016 it allows 999 Non Clustered Indexes per table.
Clustered Index - A clustered index defines the order in which data is physically stored in a table. Table data can be sorted in only way, therefore, there can be only one clustered index per table. In SQL Server, the primary key constraint automatically creates a clustered index on that particular column.
Non-Clustered Index - A non-clustered index doesn’t sort the physical data inside the table. In fact, a non-clustered index is stored at one place and table data is stored in another place. This is similar to a textbook where the book content is located in one place and the index is located in another. This allows for more than one non-clustered index per table.It is important to mention here that inside the table the data will be sorted by a clustered index. However, inside the non-clustered index data is stored in the specified order. The index contains column values on which the index is created and the address of the record that the column value belongs to.When a query is issued against a column on which the index is created, the database will first go to the index and look for the address of the corresponding row in the table. It will then go to that row address and fetch other column values. It is due to this additional step that non-clustered indexes are slower than clustered indexes
Differences between clustered and Non-clustered index
There can be only one clustered index per table. However, you can
create multiple non-clustered indexes on a single table.
Clustered indexes only sort tables. Therefore, they do not consume
extra storage. Non-clustered indexes are stored in a separate place
from the actual table claiming more storage space.
Clustered indexes are faster than non-clustered indexes since they
don’t involve any extra lookup step.
For more information refer to this article.
What are the differences between a clustered and a non-clustered index?
Clustered Index
Only one per table
Faster to read than non clustered as data is physically stored in index order
Non Clustered Index
Can be used many times per table
Quicker for insert and update operations than a clustered index
Both types of index will improve performance when select data with fields that use the index but will slow down update and insert operations.
Because of the slower insert and update clustered indexes should be set on a field that is normally incremental ie Id or Timestamp.
SQL Server will normally only use an index if its selectivity is above 95%.
Clustered indexes physically order the data on the disk. This means no extra data is needed for the index, but there can be only one clustered index (obviously). Accessing data using a clustered index is fastest.
All other indexes must be non-clustered. A non-clustered index has a duplicate of the data from the indexed columns kept ordered together with pointers to the actual data rows (pointers to the clustered index if there is one). This means that accessing data through a non-clustered index has to go through an extra layer of indirection. However if you select only the data that's available in the indexed columns you can get the data back directly from the duplicated index data (that's why it's a good idea to SELECT only the columns that you need and not use *)
Clustered indexes are stored physically on the table. This means they are the fastest and you can only have one clustered index per table.
Non-clustered indexes are stored separately, and you can have as many as you want.
The best option is to set your clustered index on the most used unique column, usually the PK. You should always have a well selected clustered index in your tables, unless a very compelling reason--can't think of a single one, but hey, it may be out there--for not doing so comes up.
Clustered Index
There can be only one clustered index for a table.
Usually made on the primary key.
The leaf nodes of a clustered index contain the data pages.
Non-Clustered Index
There can be only 249 non-clustered indexes for a table(till sql version 2005 later versions support upto 999 non-clustered indexes).
Usually made on the any key.
The leaf node of a nonclustered index does not consist of the data pages. Instead, the leaf nodes contain index rows.
Clustered Index
Only one clustered index can be there in a table
Sort the records and store them physically according to the order
Data retrieval is faster than non-clustered indexes
Do not need extra space to store logical structure
Non Clustered Index
There can be any number of non-clustered indexes in a table
Do not affect the physical order. Create a logical order for data rows and use pointers to physical data files
Data insertion/update is faster than clustered index
Use extra space to store logical structure
Apart from these differences you have to know that when table is non-clustered (when the table doesn't have a clustered index) data files are unordered and it uses Heap data structure as the data structure.
Pros:
Clustered indexes work great for ranges (e.g. select * from my_table where my_key between #min and #max)
In some conditions, the DBMS will not have to do work to sort if you use an orderby statement.
Cons:
Clustered indexes are can slow down inserts because the physical layouts of the records have to be modified as records are put in if the new keys are not in sequential order.
Clustered basically means that the data is in that physical order in the table. This is why you can have only one per table.
Unclustered means it's "only" a logical order.
A clustered index actually describes the order in which records are physically stored on the disk, hence the reason you can only have one.
A Non-Clustered Index defines a logical order that does not match the physical order on disk.
An indexed database has two parts: a set of physical records, which are arranged in some arbitrary order, and a set of indexes which identify the sequence in which records should be read to yield a result sorted by some criterion. If there is no correlation between the physical arrangement and the index, then reading out all the records in order may require making lots of independent single-record read operations. Because a database may be able to read dozens of consecutive records in less time than it would take to read two non-consecutive records, performance may be improved if records which are consecutive in the index are also stored consecutively on disk. Specifying that an index is clustered will cause the database to make some effort (different databases differ as to how much) to arrange things so that groups of records which are consecutive in the index will be consecutive on disk.
For example, if one were to start with an empty non-clustered database and add 10,000 records in random sequence, the records would likely be added at the end in the order they were added. Reading out the database in order by the index would require 10,000 one-record reads. If one were to use a clustered database, however, the system might check when adding each record whether the previous record was stored by itself; if it found that to be the case, it might write that record with the new one at the end of the database. It could then look at the physical record before the slots where the moved records used to reside and see if the record that followed that was stored by itself. If it found that to be the case, it could move that record to that spot. Using this sort of approach would cause many records to be grouped together in pairs, thus potentially nearly doubling sequential read speed.
In reality, clustered databases use more sophisticated algorithms than this. A key thing to note, though, is that there is a tradeoff between the time required to update the database and the time required to read it sequentially. Maintaining a clustered database will significantly increase the amount of work required to add, remove, or update records in any way that would affect the sorting sequence. If the database will be read sequentially much more often than it will be updated, clustering can be a big win. If it will be updated often but seldom read out in sequence, clustering can be a big performance drain, especially if the sequence in which items are added to the database is independent of their sort order with regard to the clustered index.
A clustered index is essentially a sorted copy of the data in the indexed columns.
The main advantage of a clustered index is that when your query (seek) locates the data in the index then no additional IO is needed to retrieve that data.
The overhead of maintaining a clustered index, especially in a frequently updated table, can lead to poor performance and for that reason it may be preferable to create a non-clustered index.
You might have gone through theory part from the above posts:
-The clustered Index as we can see points directly to record i.e. its direct so it takes less time for a search. Additionally it will not take any extra memory/space to store the index
-While, in non-clustered Index, it indirectly points to the clustered Index then it will access the actual record, due to its indirect nature it will take some what more time to access.Also it needs its own memory/space to store the index
// Copied from MSDN, the second point of non-clustered index is not clearly mentioned in the other answers.
Clustered
Clustered indexes sort and store the data rows in the table or view
based on their key values. These are the columns included in the
index definition. There can be only one clustered index per table,
because the data rows themselves can be stored in only one order.
The only time the data rows in a table are stored in sorted order is
when the table contains a clustered index. When a table has a
clustered index, the table is called a clustered table. If a table
has no clustered index, its data rows are stored in an unordered
structure called a heap.
Nonclustered
Nonclustered indexes have a structure separate from the data rows. A
nonclustered index contains the nonclustered index key values and
each key value entry has a pointer to the data row that contains the
key value.
The pointer from an index row in a nonclustered index to a data row
is called a row locator. The structure of the row locator depends on
whether the data pages are stored in a heap or a clustered table.
For a heap, a row locator is a pointer to the row. For a clustered
table, the row locator is the clustered index key.
Clustered Indexes
Clustered Indexes are faster for retrieval and slower for insertion
and update.
A table can have only one clustered index.
Don't require extra space to store logical structure.
Determines the order of storing the data on the disk.
Non-Clustered Indexes
Non-clustered indexes are slower in retrieving data and faster in
insertion and update.
A table can have multiple non-clustered indexes.
Require extra space to store logical structure.
Has no effect of order of storing data on the disk.