NoClassDefFoundError of using TwitterSource on Flink - apache-flink

I'd like to use TwitterSource as input in a flink project. However NoClassDefFoundError occurs when I submit the job aft. I think I have already imported flink-connector-twitter package by Maven. I think it should be a problem with maven. Can anyone tells me what should I do?
<dependency>
<groupId>org.apache.flink</groupId>
<artifactId>flink-connector-twitter_2.10</artifactId>
<version>1.3.2</version>
</dependency>

Related

What's the correct class to run Apache Camel 3.14.0 from command line?

I set the following pom.xml to use Camel 3.14.0:
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.apps</groupId>
<artifactId>MyApp</artifactId>
<version>1.0.0</version>
<name>MyApp Camel component</name>
<dependencyManagement>
<dependencies>
<dependency>
<groupId>org.apache.camel</groupId>
<artifactId>camel-bom</artifactId>
<version>3.14.0</version>
<type>pom</type>
<scope>import</scope>
</dependency>
</dependencies>
</dependencyManagement>
<dependencies>
<dependency>
<groupId>org.apache.camel</groupId>
<artifactId>camel-core</artifactId>
</dependency>
<dependency>
<groupId>org.apache.camel</groupId>
<artifactId>camel-csv</artifactId>
</dependency>
<dependency>
<groupId>org.apache.camel</groupId>
<artifactId>camel-sql</artifactId>
</dependency>
<dependency>
<groupId>org.apache.camel</groupId>
<artifactId>camel-spring</artifactId>
</dependency>
<!-- DB dependencies -->
<dependency>
<groupId>org.hsqldb</groupId>
<artifactId>hsqldb</artifactId>
<version>2.6.1</version>
<scope>system</scope>
<systemPath>D:\Drivers\hsqldb-2.6.1-jdk8.jar</systemPath>
</dependency>
</dependencies>
</project>
Then I have this command line in Windows to collect dependencies:
C:\Users\Public\apache-maven-3.2.5\bin\mvn -f pom.xml dependency:copy-dependencies
When I run it I get all jars in the destination folder (../build/target/dependency).
And then I get other run.bat file with following:
set CLASSPATH=../build/target/dependency/*;../config/
java -classpath "%CLASSPATH%" org.apache.camel.spring.Main
But when I run it, I get an error saying it can't find Main class. That class is the one used in previous use cases (Camel 2.10.6) and it worked fine. Would you please advise on what's the right class to reference here?
EDIT 1: I found in documentation that Main is now in org.apache.camel.main, so I configured that in run.bat and it's seems to be running. But now it shows the following and the odd thing about this is that it ceased picking the file from the path configured in context.xml. Any ideas?
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
EDIT 2: I looked on the error and found I needed to include dependency
<dependency>
<groupId>org.apache.logging.log4j</groupId>
<artifactId>log4j-slf4j-impl</artifactId>
</dependency>
It still seems to work (message regarding slf4 is gone) but still won't pick file from path.
Now, reason I decided to move to last LTS version was because I needed to use a component property only available in newer version of Camel than the one I've been using. So I decided to give a shot to latest version, but now I'm stuck with error saying it can't find the class.
I've somewhat used Camel in the past but only based on examples provided by someone else, never from scratch so I'm no expert at all and unfortunately I need to solve this in a hurry. I guess the easiest would be to use a java bean but I'm no java developer so I thought it might be ok using Spring XML DSL. I'm using java 1.8.0_92.
Camel documentation doesn't seem to provide so many details as per spring xml, so any help will be greatly appreciated.
Frameworks and documentation
First and foremost its good to understand that Apache Camel is integration framework, Spring is application framework with probably its most notable feature being dependency injection. Due to this the documentation kinda expects the developer to be familiar with spring-framework and able juggle between camel and spring documentation.
Camel main
Camel-main in the other hand is tool you can use to run camel applications without any framework so it has no knowledge about spring framework. There's camel-spring-main but more on that later.
Spring-boot
When it comes to spring it might be easier to just use spring-boot which you can think of as collection of maven dependencies you can use to auto-configure your spring application with default configurations.
I recommend that you create a new project using camel maven archetype camel-archetype-spring-boot. This should provide you with good starting point and example on how to get started with camel and spring.
To use spring-xml files with camel-spring-boot you can add annotation #ImportResource(classpath:META-INF/spring/camel-context.xml) over your SpringBootApplication class (class annotated with #SpringBootApplication, named MySpringBootApplication when using the template).
Change the path to match the location and name of your xml-file and delete or comment the example RouteBuilder class from the project to prevent it from interrupting with anything.
# You can run spring-boot application using maven
mvn spring-boot:run
# Alternatively you should be able to run it from jar using
java -jar application.jar
Downside for spring-boot is that it'll flood our project with bunch of extra dependencies. For example to just keep the application running the template project uses spring-boot-start-web, spring-boot-starter-undertow and spring-boot-starter-actuator dependencies.
Camel Spring Main
There's also archetype camel-archetype-spring you can use to create camel spring application without spring-boot. It uses the camel-spring-main I mentioned above and can be run using maven with command mvn camel:run.
However I find this archetype a bit lacking. First it lacks visible main class which is inconsistent if you compare it to some camel-archetype-main. Secondly there seems to be problems with its packaging configurations as I didn't find an easy way to run it from jar. Most attempts I tried resulted in ClassNotFoundException for org/apache/camel/spring/Main even tough I had all maven dependencies in place. It runs fine from IDE however.
Convert your project to JAVA-DSL and use camel main
Since your route doesn't seem all that complex you could probably convert it to Java-DSL from XML in minutes and just run it with camel-main without any application framework. There's archetype for this as well called camel-archetype-main.

Conflict in using Netfix hystrix and Archaius

I am getting below error while using hystrix and archaius together. Independently both are working perfectly fine.
IllegalStateException("A non-default configuration is already installed");
Please let me know if anyone has faced similar issue.
Issue is solved by changing the dependency from
<dependency>
<groupId>com.netflix.archaius</groupId>
<artifactId>archaius-core</artifactId>
<version>0.7.4</version>
</dependency>
to this
<dependency>
<groupId>org.springframework.cloud</groupId>
<artifactId>spring-cloud-starter-archaius</artifactId>
<version>1.3.4.RELEASE</version>
</dependency>
and no code required for the scheduler configuration. Everyting is managed by spring-cloud-starter-archaius.

TestNG framework, #Test Annotation code is not working

TestNG framework, #Test Annotations is not working for me, everything else is perfect, i have also tried by copy pasting the tutorials code and applied the same code but not fruitful...
Please ensure below things:
1. Importing testng
import org.testng.annotations.Test;
2.If maven, add below dependency to POM.xml
<dependency>
<groupId>org.testng</groupId>
<artifactId>testng</artifactId>
<version>6.9.10</version>
</dependency>
<dependency>
3.Import Testng.jar in case of non-maven project.
If still issue persists, kindly post error message.

Allure First Steps - Failing POM.XML

trying to use the Allure framework - but having some issues.
I am using Maven, Junit and Eclipse. Created a very simple test case and confirmed all this works. So next step was to add in Allure. Now it seems that when I add in the allure dependency, everything goes wrong (all subsequent dependancies fail, and the POM which worked, now has 50+ errors.)
If I remove the following, then I can launch mvn clean test and my test case runs (Eclipse also realises something is wrong and gives me an error)
I figure it's got to be something really obvious, but I've been staring at it so long I can't see it.
Not sure how to attach the POM, but I think the error is in these sections.
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
<compiler.version>1.7</compiler.version>
<aspectj.version>1.7.4</aspectj.version>
<allure.version>{latest-allure-version}</allure.version>
</properties>
<dependency>
<groupId>ru.yandex.qatools.allure</groupId>
<artifactId>allure-junit-adaptor</artifactId>
<version>${allure.version}</version>
</dependency>
<dependency>
<groupId>com.github.detro.ghostdriver</groupId>
<artifactId>phantomjsdriver</artifactId>
<version>1.0.4</version>
</dependency>
Got this sorted - seems that I had a dependancy issue when I added in Selenium.

Get validation to work with Maven and Requestfactory on Eclipse

I have a project setup with Maven and using RequestFactory. However I cannot get the validation to work through maven settings. This is how my maven setup looks like:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>${maven-compiler-plugin.version}</version>
<configuration>
<source>${target.jdk}</source>
<target>${target.jdk}</target>
<encoding>${project.build.sourceEncoding}</encoding>
<proc>none</proc>
</configuration>
<dependencies>
<dependency>
<groupId>com.google.web.bindery</groupId>
<artifactId>requestfactory-apt</artifactId>
<version>${gwt.version}</version>
</dependency>
</dependencies>
</plugin>
I have also added Hibernate validator.
On the Eclipse side, I have tried various things, among which the most correct one looks like this:
I also have installed the m2e-apt plugin.
However I still can't get the validation tool to run. I don't get validation errors if I make mistakes on purpose and of course, when I run my application I get the infamous
SEVERE: Unexpected error
java.lang.RuntimeException: The RequestFactory ValidationTool must be run for the ...
Anyone has any idea of what I am missing? Should I simply resign myself to configure Eclipse manually?
You explicitly disabled annotation processing in the maven-compiler-plugin's configuration:
<proc>none</proc>
Remove that line and it should run annotation processors.
Note that there's a regression with maven-compiler-plugin 3.x where the plugin dependencies no longer are taken into account when compiling (it probably never was thought as a feature) so your requestfactory-apt would not be seen by JavaC with recent maven-compiler-plugin versions and you'd still have the same problem then.
The only way to reliably use annotation processors with Maven is to declare them as project dependencies with either <scope>provided</scope> or <optional>true</optional>, or to use the maven-processor-plugin. There's an open feature request for better support in Maven proper through the maven-compiler-plugin: http://jira.codehaus.org/browse/MCOMPILER-203

Resources