I have SSIS package that grabs excel file and load it to sql table .i get the following error when i run it. I have tried to make run on 64 bit to false. That did not work
i also have installed 64 bit access driver engin . That did not help either.
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at ABC [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Failure creating file.".
Failure creating file
This error is thrown when the Excel connection manager cannot access to the chosen path, it might be caused by:
You are using a network path / try replacing with a local path
it might be pointed to your local server, but when it is deployed to another server it will throw error
you do not have permission to access the selected path from the account that is running the SSIS
path does not exists
I had the same error, to fix it I specified the IP of the shared folder instead of FQDN.
I had the same error too, my files are save in a folder OneDrive.
I fix the error by moving the files out from Onerive
Related
Problem statement: To transfer data from Excel to SQL Server.
I have a 64 bit system and 64 bit Microsoft Excel Installed. To make Excel Connection Manager work, I downloaded AccessDatabaseEngine.exe from https://www.microsoft.com/en-us/download/details.aspx?id=13255. I tried to see if it works with AccessDatabaseEngine_X64.exe and it didn't, so I just installed AccessDatabaseEngine.exe as you cannot install both apparently. In that way I was able to match columns and do things as required.
Then when I ran the project it throws errors as following-
Information: 0x4004300A at Data1, SSIS.Pipeline: Validation phase is beginning.
Error: 0xC0209303 at Package, Connection manager "Excel Connection Manager 3": The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error: 0xC001002B at Package, Connection manager "Excel Connection Manager 3": The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine. For more information, see http://go.microsoft.com/fwlink/?LinkId=219816
Error: 0xC020801C at Data1, DataImportFile [20]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager 3" failed with error code 0xC0209303. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data1, SSIS.Pipeline: DataImportFile failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data1, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data1: There were errors during task validation.
I tried to see many videos on Youtube and went through some blogs. But I am unable to understand the situation here. What could be missing here?
Problem
Get the error (see below) when executing an SSIS Odata connection to the Medicare Data site despite successfully previewing data.
Tried
Running as 32-bit
Reinstalling the driver
SSIS Error in Debug
Error: 0xC020801F at data convert, OData Source [21]: Cannot acquire a managed connection from the run-time connection manager.
Error: 0xC0047017 at data convert, SSIS.Pipeline: OData Source failed validation and returned error code 0xC020801F.
Error: 0xC004700C at data convert, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at data convert: There were errors during task validation.
Turns out its a really dumb thing: use http instead of https despite the Medicare site reference to https
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/72a5752a-22e5-4542-97c3-7a4044e0fea5/ssis-odata-source-works-in-development-but-fails-when-run-0xc020801f
Can you open the SSIS package from within Visual Studio shell, and then look at the oData connection and test it? I'm having a similar problem, and when I test my connection, I'm getting an Internal Server Error (500) returned from the SharePoint server where I'm trying to connect.
There was a communication link error while I was using SQL Server Native Client 10 in an SSIS Data Flow component.
Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has
occurred. Error code: 0x80004005. An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005
Description: "Communication link failure".An OLE DB record is
available. Source: "Microsoft SQL Server Native Client 10.0"
Hresult: 0x80004005 Description: "TCP Provider: The specified network
name is no longer available.
So I changed from SQL Server Native Client 10 to Microsoft OLEDB Provider for SQL Server, hoping that it would run fine. This time got an error as shown below:
[Transacn_Tbl1[737]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE
DB error has occurred. Error code: 0x80004005. An OLE DB record is
available. Source: "Microsoft OLE DB Provider for SQL Server"
Hresult: 0x80004005 Description: "Unspecified error occurred on SQL
Server. Connection may have been terminated by the server.".
[Transacn_Tbl1[737]] Error: SSIS Error Code
DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination
Input" (750)" failed because error code 0xC020907B occurred, and the
error row disposition on "input "OLE DB Destination Input" (750)"
specifies failure on error. An error occurred on the specified object
of the specified component. There may be error messages posted before
this with more information about the failure.
What is the difference between these 2 providers? Which one should I use?
I ran into this issue after releasing a new SSIS project to the production environment.
At first, I was able to validate the package with success, but when I tried to execute the package, I got the DTS_E_OLEDBERROR. Error code: 0x80004005. message.
I tried to validate the package with the servername and password variables set to sensitive, but in this case the validation failed as well.
After setting the environment variables back to non-sensitive again and inserting the environment variable values, I was able to validate and execute the package.
To me it seems like in some cases the metadata in the SSISDB gets corrupted, but unfortunately I've not been able to point down the source of this issue.
I hope this will help someone. I've went through a lot of debug scenarios before I ended up with this (rather unsatisfying) solution.
It looks like you have to resolve this issue, you must change the permissions for the Temp directory of the SQL Server Agent Service startup account. Grant the Read permission and the Write permission to the SQL Server Agent proxy account for this directory.
http://support.microsoft.com/kb/933835
I changed connection to Provider=SQLNCLI11.1 and executed
successfully with parameters.
DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005
This obscure error can also mean something as benign as the OLE provider cannot find the expected Excel Worksheet.
I recently came across this error in an SSIS project and after several hours trying to track down what I believed was some configuration issue, it turned out to be the end user had simply changed the name of a Worksheet in the Excel data source.
Microsoft Messaging FTW!
I am facing an issue while deploying my SSIS packages to a target machine.
I have done the deployment through an indirect XML configuration. I use one parent package which invokes all the other child packages in loading a data warehouse. Child packages acquire the database connections via a parent package variable. Thus an isolated child package is not executable.
In this setup the flow works perfectly in my development machine. But when I try to deploy it to another one some packages run and populate the tables while others with the same configurations fail. I have made the "Delay Validation" property to true in all the child packages as well.
Follwing are the errors I get in order:
Error 17 Validation error. Extract and Populate Data to DimRetailer: DimRetailer: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for ODBC Drivers" Hresult: 0x80004005 Description: "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". DimRetailer.dtsx 0 0
Error 18 Validation error. Extract and Populate Data to DimRetailer: Extract and Populate Data to DimRetailer: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Con_XONTRDDATAMART_OLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. DimRetailer.dtsx 0 0
Error 19 Validation error. DimRetailer Connection manager "Con_XONTRDDATAMART_OLEDB": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for ODBC Drivers" Hresult: 0x80004005 Description: "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". DimRetailer.dtsx 0 0
Error 20 Validation error. Extract and Populate Data to DimRetailer Expire Old SCD2 Rows [617]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Con_XONTRDDATAMART_OLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. DimRetailer.dtsx 0 0
What I can not realize is why some packages run alright while others fail which share the same connections.
Additionally, the final deployment will be on a server with a 64 bit OS, are there any steps I should specifically take to make the deployment run smoothly?
Thank you very much for any contribution, in advance.
I have a setup similar to yours. However, what i share to child packages is a connection string. It might be worth a try if you are still facing the same issue
I have an SSIS package that imports an excel spreadsheet into an SQL Server 2008 database.
I have an Excel connection in the Connection Managers tab and it points to an Excel file on my local computer.
But when I open the Excel Source in Data Flow, if I try to view columns or change the "Name of Excel sheet:" I get this error.
Error at LoadMasterData [Connection manager "SourceConnectionExcel"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Error at Data Flow Task 1 [Source - Sheet1$ [1]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
The package was saved from SQL Server Management Studio using Import Data. When I run the package it works fine but I want to be able to specify the spreadsheet name as a variable. When I change the option to specify the sheet name as a variable, it won't let me close the window with the "OK" button, and just keeps giving me the same error as above.
Has anyone experienced this behaviour before that can help me get this working?
Thanks
Are you running on 32bit or 64bit? if you're on 64bit you need to know that there are no providers for Excel - you'll have to enforce the package to not use 64bit. Right click project, properties, debugging: Run64BitRuntime - set to false.