I tried to install Prover9 on my Windows system. But after completion of the installation procedure when it is supposed to launch the application. I'm getting the following error:
Prover9error
When I tried to search for that log file, there was no such file present at that location.
Please help if anyone has come across something like this and knows how to solve it.
[P.S.: I could find this error on the internet.]
Thanks!
i also had a problem installing the prover9 due to the Missing MSVCP71.dll however i have overcome it by get the prover9-Mace-version4 installed. to solve the error follow this instruction
"If you are using Windows 7 32-bit then you need to put both dll files inside Windows/System32 folder as shown in the screenshot below."
If you are using Windows 7 64-bit then you need to put both dll files inside the Windows/SysWOW64 folder as shown in the screenshot below.
hope it solve ur problem
Related
I am following this trail and I have completed all the steps correctly. Even I able to download the debug logs.
But Problem occurs when I am trying to run the following command
> SFDX: Launch Apex Replay Debugger with Current File
It shows the below error.
But, the thing is, I have jdk-12.0.1 installed on my PC. After that, I have installed the Java 8 also and thus jdk-1.8.0_181 is also installed.
My Java Home setting in VS code is following
I have also restarted my PC, But no luck. It is throwing the same error.
How to solve this ?
You have to set the path as 'C://Program Files//Java//jdk1.8.0_181' and then restart the vs code
In case any Mac users needed help:
I installed Java 11 and then ran this code:
/usr/libexec/java_home -v 11 to find the exact directory and then pasted it in the user settings you have marked with a red rectangle. Then I restarted VS code and it worked.
Edit: Looked at your screenshots...
You did this: C:\Program Files\Java\jdk1.8.0_181
You wanted this: C:/Program Files/Java/jdk1.8.0_181
From the Trailhead unit you linked:
I've been working on trying to figure out why our auto-generated deploy.cmdscripts will not work when installed to C:\Program Files (x86)\OurProgram. I finally narrowed down the issue to the closing parenthesis in (x86) as the script would terminate with "Files was unexpected at this time". One possible solution was to manually create another batch file to set _DeploySetParametersFile to a Windows path ( C:\Program^ Files^ (x86^)\OurProgram\Program.Parameters.xml). This isn't a valid solution for me, so I dug into the auto generated file and found the issue to be 2 variables:
RootPath
_DeploySetParametersFile
Both of which were referenced using %'s(i.e. %RootPath%), however as soon as they were changed to !'s(i.e. !RootPath!), no 2nd script was needed and I can run the cmd script from Program Files (x86) just fine. The issue of course with this is, the deploy.cmd file is auto-generated on each build, thus I have to change it for each build I do. My question is this: Is there a way to edit the template Visual Studio uses to generate the deploy.cmd file? If so, where? It seems so ridiculous that Microsoft would have this be an issue in their web deployment.
I'm facing a problem right now and I don't really know how to get more informations about it.
I've converted a desktop application through Microsoft's Desktop App Converter, made some manual modifications about the visual assets, and rebundled it through "makeappx.exe". Then I signed it.
Everything went fine. Except that when I double click the appx to check it, I have the following window:
Appx Error
Which roughly translates as "Couldn't open the appx or appxbundle file" and "Reason: Failure caused by an unknown reason".
This does not helps me a lot :/
However, if I try to install the package through a simple "Add-appxpackage MyPackage.appx", it works perfectly fine.
Could anyone help me find some leads on what's happening here? I've already checked the event viewer as explained here but I couldn't find anything unusual.
Thanks,
Skefrep
It seems the Microsoft team has taken notice of this problem and investigated this appropriately.
-Here is their solution-
The problem can be because when you convert an app with DesktopBridge the resources are signed with the manifest info and store that info in the .pri files you found in PackageFiles folder. Later, when you change something like the Publisher or the Name this signature doesn't match. To fix this you only need to recreate the .pri files.
rm *.pri. Remove the old .pri files.
cd C:\foo\PackageFiles\. Change current directory to the PackageFiles folder. This step is important for the next step.
makepri createconfig /cf priconfig.xml /dq en-US. Create a configuration file for the resources.
makepri new /pr "C:\foo\PackageFiles" /cf "C:\foo\PackageFiles\priconfig.xml". Generate the new *.pri files.
Then you can make the package as usual: MakeAppx, etc.
You can find more information about this problem in "Failed due to unknown reasons" error when you try to sideload a Desktop Bridge app - App Consult Team.
I am unable to build my Web Application (not Web Site) in our build environement. We use DMAKE in our build environment (this unfortunately is non negotiable, therefore using MSBUILD is not permitted ) and when invoking the asp.net precompiler through
C:\Windows\Microsoft.NET\Framework\v2.0.50727\aspnet_compiler -d -nologo -p Site -f -fixednames -errorstack -v / Debug
We get the following error
error ASPPARSE: Could not load type 'X.Y.Admin.Site.Global
If I compile from the ide it is successful. If i then compile with aspnet_compilier it is successful. So i only get a successful compile with aspnet_compiler when the target dll i am trying to compile is in the bin of the web application i am compiling.
I keep running into postings that talk about solutions using MSBUILD which unfortunately I cant try.
Any help would be appreciated
We had the same problem on our web application:
error ASPPARSE: Could not load type '...'
The problem was that we had the file on disk (on the project folder) but it wasn't included in our application project (in the .csproj file). We solved the problem by including the file in the project :)
I ran into a similar problem using NANT. The trick was to compile the web applications code files into a dll then include that when using aspnet_compiler.
use the command line compiler,either csc.exe (c#) or vbc.exe (visual basic), to compile your web application with an output of type library. This will create a dll that you can use in your aspnet_compiler task
Have you tried specifying the path using -p? Sounds to me like it can't find that type / assembly.
http://msdn.microsoft.com/en-us/library/ms229863(VS.80).aspx
For web applications, you have to build the .vb files into a dll and put that in the bin folder before you run the aspnet compiler. Check the output window in visual studio and you'll see the command line for the VB compiler. Run that first before you run the aspnet compiler, and the asp pages should be able to find the missing types.
This problem was resolved for me by simply deleting all bin and obj folders. Seems like they were in a bad state somehow. I also deleted the the .sou file, but I don't think that was the issue.
I received the same problem.
I fixed it by copying my webapp's DLL from the OBJ/DEBUG folder to the BIN folder.
I just had this error and found 2 ways to fix it, either:
Change the Codebehind attribute in the global.asax file to CodeFile and add "partial" to the class declaration
In the deployment project's property pages, set "Version output assemblies" and provide a version number
I don't really know why either worked, but it did.
solution :
-p Site path must have the directory path of .csproj file location.
ex :-
aspnet_compiler -p D:\Projects\MGM\mgm\mgm -v / D:\Projects\MGM-deploy\mgm_compiled
I am trying to compile a labview CIN using visual studio 2003.
I have followed the tutorial located here to the letter, but am getting the following error:
Project : error PRJ0019: A tool returned an error code from "Performing Custom Build Step"
Does anyone know what is causing this? I tried this link found at an expert's exchange question but it does not seem relevant.
Is there an easier way to build a CIN using visual studio?
Ok, solved it.
Turns out it's an issue with the lsvbutil.exe bundled with labview 8.5. Workaround is to replace with the version from 8.2
See http://digital.ni.com/public.nsf/allkb/0029165B53320B2886257369005826A1
Please post the entire error. It appears that the custom build step defined in your link does not work.
On the Custom Build Step->General page, type:
"$(CINTOOLS_DIR)\lvsbutil" "$(TargetName)" -d "$(ProjectDir)$(OutDir)"
in the commandline field and type $(OutDir)$(TargetName).lsb in the output field.
Try pasting that into a commandline and running it. I suspect you have not got the env variables set or they are not pointing to the right places.