Related
When should I use single quotes and double quotes in C or C++ programming?
In C and in C++ single quotes identify a single character, while double quotes create a string literal. 'a' is a single a character literal, while "a" is a string literal containing an 'a' and a null terminator (that is a 2 char array).
In C++ the type of a character literal is char, but note that in C, the type of a character literal is int, that is sizeof 'a' is 4 in an architecture where ints are 32bit (and CHAR_BIT is 8), while sizeof(char) is 1 everywhere.
Some compilers also implement an extension, that allows multi-character constants. The C99 standard says:
6.4.4.4p10: "The value of an integer character constant containing more
than one character (e.g., 'ab'), or
containing a character or escape
sequence that does not map to a
single-byte execution character, is
implementation-defined."
This could look like this, for instance:
const uint32_t png_ihdr = 'IHDR';
The resulting constant (in GCC, which implements this) has the value you get by taking each character and shifting it up, so that 'I' ends up in the most significant bits of the 32-bit value. Obviously, you shouldn't rely on this if you are writing platform independent code.
Single quotes are characters (char), double quotes are null-terminated strings (char *).
char c = 'x';
char *s = "Hello World";
'x' is an integer, representing the numerical value of the
letter x in the machine’s character set
"x" is an array of characters, two characters long,
consisting of ‘x’ followed by ‘\0’
I was poking around stuff like: int cc = 'cc'; It happens that it's basically a byte-wise copy to an integer. Hence the way to look at it is that 'cc' which is basically 2 c's are copied to lower 2 bytes of the integer cc. If you are looking for a trivia, then
printf("%d %d", 'c', 'cc'); would give:
99 25443
that's because 25443 = 99 + 256*99
So 'cc' is a multi-character constant and not a string.
Cheers
Single quotes are for a single character. Double quotes are for a string (array of characters). You can use single quotes to build up a string one character at a time, if you like.
char myChar = 'A';
char myString[] = "Hello Mum";
char myOtherString[] = { 'H','e','l','l','o','\0' };
single quote is for character;
double quote is for string.
In C, single-quotes such as 'a' indicate character constants whereas "a" is an array of characters, always terminated with the \0 character
Double quotes are for string literals, e.g.:
char str[] = "Hello world";
Single quotes are for single character literals, e.g.:
char c = 'x';
EDIT As David stated in another answer, the type of a character literal is int.
A single quote is used for character, while double quotes are used for strings.
For example...
printf("%c \n",'a');
printf("%s","Hello World");
Output
a
Hello World
If you used these in vice versa case and used a single quote for string and double quotes for a character, this will be the result:
printf("%c \n","a");
printf("%s",'Hello World');
output :
For the first line. You will get a garbage value or unexpected value or you may get an output like this:
�
While for the second statement, you will see nothing. One more thing, if you have more statements after this, they will also give you no result.
Note: PHP language gives you the flexibility to use single and double-quotes easily.
Use single quote with single char as:
char ch = 'a';
here 'a' is a char constant and is equal to the ASCII value of char a.
Use double quote with strings as:
char str[] = "foo";
here "foo" is a string literal.
Its okay to use "a" but its not okay to use 'foo'
Single quotes are denoting a char, double denote a string.
In Java, it is also the same.
While I'm sure this doesn't answer what the original asker asked, in case you end up here looking for single quote in literal integers like I have...
C++14 added the ability to add single quotes (') in the middle of number literals to add some visual grouping to the numbers.
constexpr int oneBillion = 1'000'000'000;
constexpr int binary = 0b1010'0101;
constexpr int hex = 0x12'34'5678;
constexpr double pi = 3.1415926535'8979323846'2643383279'5028841971'6939937510;
In C & C++ single quotes is known as a character ('a') whereas double quotes is know as a string ("Hello"). The difference is that a character can store anything but only one alphabet/number etc. A string can store anything.
But also remember that there is a difference between '1' and 1.
If you type
cout<<'1'<<endl<<1;
The output would be the same, but not in this case:
cout<<int('1')<<endl<<int(1);
This time the first line would be 48. As when you convert a character to an int it converts to its ascii and the ascii for '1' is 48.
Same, if you do:
string s="Hi";
s+=48; //This will add "1" to the string
s+="1"; This will also add "1" to the string
different way to declare a char / string
char char_simple = 'a'; // bytes 1 : -128 to 127 or 0 to 255
signed char char_signed = 'a'; // bytes 1: -128 to 127
unsigned char char_u = 'a'; // bytes 2: 0 to 255
// double quote is for string.
char string_simple[] = "myString";
char string_simple_2[] = {'m', 'S', 't', 'r', 'i', 'n', 'g'};
char string_fixed_size[8] = "myString";
char *string_pointer = "myString";
char string_poionter_2 = *"myString";
printf("char = %ld\n", sizeof(char_simple));
printf("char_signed = %ld\n", sizeof(char_signed));
printf("char_u = %ld\n", sizeof(char_u));
printf("string_simple[] = %ld\n", sizeof(string_simple));
printf("string_simple_2[] = %ld\n", sizeof(string_simple_2));
printf("string_fixed_size[8] = %ld\n", sizeof(string_fixed_size));
printf("*string_pointer = %ld\n", sizeof(string_pointer));
printf("string_poionter_2 = %ld\n", sizeof(string_poionter_2));
When should I use single quotes and double quotes in C or C++ programming?
In C and in C++ single quotes identify a single character, while double quotes create a string literal. 'a' is a single a character literal, while "a" is a string literal containing an 'a' and a null terminator (that is a 2 char array).
In C++ the type of a character literal is char, but note that in C, the type of a character literal is int, that is sizeof 'a' is 4 in an architecture where ints are 32bit (and CHAR_BIT is 8), while sizeof(char) is 1 everywhere.
Some compilers also implement an extension, that allows multi-character constants. The C99 standard says:
6.4.4.4p10: "The value of an integer character constant containing more
than one character (e.g., 'ab'), or
containing a character or escape
sequence that does not map to a
single-byte execution character, is
implementation-defined."
This could look like this, for instance:
const uint32_t png_ihdr = 'IHDR';
The resulting constant (in GCC, which implements this) has the value you get by taking each character and shifting it up, so that 'I' ends up in the most significant bits of the 32-bit value. Obviously, you shouldn't rely on this if you are writing platform independent code.
Single quotes are characters (char), double quotes are null-terminated strings (char *).
char c = 'x';
char *s = "Hello World";
'x' is an integer, representing the numerical value of the
letter x in the machine’s character set
"x" is an array of characters, two characters long,
consisting of ‘x’ followed by ‘\0’
I was poking around stuff like: int cc = 'cc'; It happens that it's basically a byte-wise copy to an integer. Hence the way to look at it is that 'cc' which is basically 2 c's are copied to lower 2 bytes of the integer cc. If you are looking for a trivia, then
printf("%d %d", 'c', 'cc'); would give:
99 25443
that's because 25443 = 99 + 256*99
So 'cc' is a multi-character constant and not a string.
Cheers
Single quotes are for a single character. Double quotes are for a string (array of characters). You can use single quotes to build up a string one character at a time, if you like.
char myChar = 'A';
char myString[] = "Hello Mum";
char myOtherString[] = { 'H','e','l','l','o','\0' };
single quote is for character;
double quote is for string.
In C, single-quotes such as 'a' indicate character constants whereas "a" is an array of characters, always terminated with the \0 character
Double quotes are for string literals, e.g.:
char str[] = "Hello world";
Single quotes are for single character literals, e.g.:
char c = 'x';
EDIT As David stated in another answer, the type of a character literal is int.
A single quote is used for character, while double quotes are used for strings.
For example...
printf("%c \n",'a');
printf("%s","Hello World");
Output
a
Hello World
If you used these in vice versa case and used a single quote for string and double quotes for a character, this will be the result:
printf("%c \n","a");
printf("%s",'Hello World');
output :
For the first line. You will get a garbage value or unexpected value or you may get an output like this:
�
While for the second statement, you will see nothing. One more thing, if you have more statements after this, they will also give you no result.
Note: PHP language gives you the flexibility to use single and double-quotes easily.
Use single quote with single char as:
char ch = 'a';
here 'a' is a char constant and is equal to the ASCII value of char a.
Use double quote with strings as:
char str[] = "foo";
here "foo" is a string literal.
Its okay to use "a" but its not okay to use 'foo'
Single quotes are denoting a char, double denote a string.
In Java, it is also the same.
While I'm sure this doesn't answer what the original asker asked, in case you end up here looking for single quote in literal integers like I have...
C++14 added the ability to add single quotes (') in the middle of number literals to add some visual grouping to the numbers.
constexpr int oneBillion = 1'000'000'000;
constexpr int binary = 0b1010'0101;
constexpr int hex = 0x12'34'5678;
constexpr double pi = 3.1415926535'8979323846'2643383279'5028841971'6939937510;
In C & C++ single quotes is known as a character ('a') whereas double quotes is know as a string ("Hello"). The difference is that a character can store anything but only one alphabet/number etc. A string can store anything.
But also remember that there is a difference between '1' and 1.
If you type
cout<<'1'<<endl<<1;
The output would be the same, but not in this case:
cout<<int('1')<<endl<<int(1);
This time the first line would be 48. As when you convert a character to an int it converts to its ascii and the ascii for '1' is 48.
Same, if you do:
string s="Hi";
s+=48; //This will add "1" to the string
s+="1"; This will also add "1" to the string
different way to declare a char / string
char char_simple = 'a'; // bytes 1 : -128 to 127 or 0 to 255
signed char char_signed = 'a'; // bytes 1: -128 to 127
unsigned char char_u = 'a'; // bytes 2: 0 to 255
// double quote is for string.
char string_simple[] = "myString";
char string_simple_2[] = {'m', 'S', 't', 'r', 'i', 'n', 'g'};
char string_fixed_size[8] = "myString";
char *string_pointer = "myString";
char string_poionter_2 = *"myString";
printf("char = %ld\n", sizeof(char_simple));
printf("char_signed = %ld\n", sizeof(char_signed));
printf("char_u = %ld\n", sizeof(char_u));
printf("string_simple[] = %ld\n", sizeof(string_simple));
printf("string_simple_2[] = %ld\n", sizeof(string_simple_2));
printf("string_fixed_size[8] = %ld\n", sizeof(string_fixed_size));
printf("*string_pointer = %ld\n", sizeof(string_pointer));
printf("string_poionter_2 = %ld\n", sizeof(string_poionter_2));
When I construct a string like this:
char string[1] = {'a'};
printf("%s", string)
it returns a a4.
Why is there a four at the end? How can I get rid of it?
I choose this method because I need to make a string from character indexes, such as char array[4] = {string[i],string[j],string[k]};.
Your string should end with terminating char '\0'
You can do it by:
char string[2] = {'a','\0'};
Or:
char string[] = "a";
"strings" in C are essentially arrays of characters ending with the \0 character (null terminated).
So if you want an array of characters, what you did is fine, but it is not a "string". Dont try to print it as such.
If you would also like to print it or treat it as a "string", then increase it's length by 1, and add a '\0' char at the end.
The conversion specification %s is used to output strings that is a sequence of characters terminated by a zero character.
The array declared this way
char string[1] = {'a'};
does not contain a string.
So to output its elements you need to specify the exact number of characters you are going to output. For example
printf("%*.*s", 1, 1, string);
Otherwise reserve one more element in the array for the terminating zero and use the conversion specification %s. For example
char string[2] = {'a'};
printf( "%s", string );
I have an array of charracters where I put in information using a gets().
char inname[30];
gets(inname);
How can I add another character to this array without knowing the length of the string in c? (the part that are actual letters and not like empty memmory spaces of romething)
note: my buffer is long enough for what I want to ask the user (a filename, Probebly not many people have names longer that 29 characters)
Note that gets is prone to buffer overflow and should be avoided.
Reading a line of input:
char inname[30];
sscanf("%.*s", sizeof(inname), inname);
int len = strlen(inname);
// Remove trailing newline
if (len > 0 && inname[len-1] == '\n') {
len--;
inname[len] = '\0'
}
Appending to the string:
char *string_to_append = ".";
if (len + strlen(string_to_append) + 1) <= sizeof(inname)) {
// There is enough room to append the string
strcat(inname, string_to_append);
}
Optional way to append a single character to the string:
if (len < sizeof(inname) - 2) {
// There is room to add another character
inname[len++] = '.'; // Add a '.' character to the string.
inname[len] = '\0'; // Don't forget to nul-terminate
}
As you have asked in comment, to determine the string length you can directly use
strlen(inname);
OR
you can loop through string in a for loop until \0 is found.
Now after getting the length of prvious string you can append new string as
strcat(&inname[prevLength],"NEW STRING");
EDIT:
To find the Null Char you can write a for loop like this
for(int i =0;inname[i] != 0;i++)
{
//do nothing
}
Now you can use i direcly to copy any character at the end of string like:
inname[i] = Youe Char;
After this increment i and again copy Null char to(0) it.
P.S.
Any String in C end with a Null character termination. ASCII null char '\0' is equivalent to 0 in decimal.
You know that the final character of a C string is '\0', e.g. the array:
char foo[10]={"Hello"};
is equivalent to this array:
['H'] ['e'] ['l'] ['l'] ['0'] ['\0']
Thus you can iterate on the array until you find the '\0' character, and then you can substitute it with the character you want.
Alternatively you can use the function strcat of string.h library
Short answer is you can't.
In c you must know the length of the string to append char's to it, in other languages the same applies but it happens magically, and without a doubt, internally the same must be done.
c strings are defined as sequences of bytes terminated by a special byte, the nul character which has ascii code 0 and is represented by the character '\0' in c.
You must find this value to append characters before it, and then move it after the appended character, to illustrate this suppose you have
char hello[10] = "Hello";
then you want to append a '!' after the 'o' so you can just do this
size_t length;
length = strlen(hello);
/* move the '\0' one position after it's current position */
hello[length + 1] = hello[length];
hello[length] = '!';
now the string is "Hello!".
Of course, you should take car of hello being large enough to hold one extra character, that is also not automatic in c, which is one of the things I love about working with it because it gives you maximum flexibility.
You can of course use some available functions to achieve this without worrying about moving the '\0' for example, with
strcat(hello, "!");
you will achieve the same.
Both strlen() and strcat() are defined in string.h header.
How do I assign a string to a character pointer in C ?
Suppose I have a string like "1234788654446" and when I assign it to a char pointer, I am getting error like "missing terminating character". What's wrong with the following code ?
The actual problem statement is this : I have a 1000 digit number and i have to find the greatest product of 5 consecutive digits. so when i store the number in a string, I am getting warning: ""Integer constant is too large for its type" and error "Invalid digit 9 in octal constant" .
My code is :
#include<stdio.h>
int main(){
int i=0;
int a,b,c,d,e,pro,max=0;
char str[] = "73167176531330624919225119674426574742355349194934
96983520312774506326239578318016984801869478851843
85861560789112949495459501737958331952853208805511
12540698747158523863050715693290963295227443043557
66896648950445244523161731856403098711121722383113
62229893423380308135336276614282806444486645238749
30358907296290491560440772390713810515859307960866
70172427121883998797908792274921901699720888093776
65727333001053367881220235421809751254540594752243
52584907711670556013604839586446706324415722155397
53697817977846174064955149290862569321978468622482
83972241375657056057490261407972968652414535100474
82166370484403199890008895243450658541227588666881
16427171479924442928230863465674813919123162824586
17866458359124566529476545682848912883142607690042
24219022671055626321111109370544217506941658960408
07198403850962455444362981230987879927244284909188
84580156166097919133875499200524063689912560717606
05886116467109405077541002256983155200055935729725
71636269561882670428252483600823257530420752963450";
while(str[i+4] !='\0'){
a = str[i]-'0';
b = str[i+1]-'0';
c = str[i+2]-'0';
d = str[i+3]-'0';
e = str[i+4]-'0';;
pro = a*b*c*d*e;
if(pro>max)
max = pro;
i++;
}
printf("%d",max);
return 0;
}
Line breaks aren't your friend. You need to do ...
char str[] = "73167176531330624919225119674426574742355349194934\
96983520312774506326239578318016984801869478851843\
...
71636269561882670428252483600823257530420752963450";
(Notice the \ on the end of each line, and no leading whitespace on subsequent lines. You can't split a quoted string over multiple lines in C without using \)
Option B is:
char str[] = "73167176531330624919225119674426574742355349194934"
"96983520312774506326239578318016984801869478851843"
...
"71636269561882670428252483600823257530420752963450";
It looks like the problem is that you're assigning the string over multiple lines. If you're going to do that, make sure you have a \ followed by no other characters at the end every line during the string assignment so the compiler knows that the string continues below.
Alternative solutions would be to assign the string on one singular line, or wrap each line in quotes.
Example:
char str[] = "73167176531330624919225119674426574742355349194934\
96983520312774506326239578318016984801869478851843\
84580156166097919133875499200524063689912560717606\
05886116467109405077541002256983155200055935729725\
71636269561882670428252483600823257530420752963450";
You can't wrap strings like that. You can concatenate them by putting "s around each line:
char str[] = "123"
"432"
"543";
Or you can use a backslash \ to continue lines if you ensure there is no extra whitespace at the beginning.
char str[] = "123\
456\
789";
The warnings are coming because the compiler is interpreting subsequent lines as integers, which are too large to be stored. And a line of digits starting with 0 is interpreted as an octal number, which explains the "invalid digit 9" error.