I am trying to get data from oleDB and load it into Excel. But when I put sql Command in the OleDB Source it is giving me the following error. But the Command works fine in SQl Server.
SQL Statement : Exec ImpGetOrderDefaults_Ins_PatLoc_Site '0001','-1'
TITLE: Microsoft Visual Studio
Error at Ins_PatLoc_Sites [OLE DB Source [16]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Incorrect syntax near the keyword 'AND'.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Incorrect syntax near the keyword 'WHERE'.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Incorrect syntax near the keyword 'WHERE'.".
Error at Ins_PatLoc_Sites [OLE DB Source [16]]: Unable to retrieve column information from the data source. Make sure your target table in the database is available.
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020204A (Microsoft.SqlServer.DTSPipelineWrap)
BUTTONS:
OK
Related
I have an SSIS package that consists of data flow tasks and contains an OLEDB source from DB2 and OLDB Target. The provider is microsoft oledb for db2..This used to run fine, but now I've got an error as shown below.
Exception from HRESULT: 0xC0202009
Error atxx [OLE DB Source [478]]: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider"
Hresult: 0x80040E14 Description: ""DATAWAREHOUSEUSRچBIN"
does not have the privilege to perform operation "".".
I'm exporting data from SSMS as a CSV, I'm checking my work by downloading the data again, but the second time around (and when using different data) I'm getting the below errors in export wizard. It had been working previously, but now every time I attempt the export these errors pop up. Any ideas for fixing this?
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record
is available. Source: "Microsoft SQL Server Native Client 11.0"
Hresult: 0x80004005 Description: "Protocol error in TDS stream". An
OLE DB record is available. Source: "Microsoft SQL Server Native
Client 11.0" Hresult: 0x80004005 Description: "Protocol error in TDS
stream". An OLE DB record is available. Source: "Microsoft SQL Server
Native Client 11.0" Hresult: 0x80004005 Description: "Communication
link failure". An OLE DB record is available. Source: "Microsoft SQL
Server Native Client 11.0" Hresult: 0x80004005 Description: "TCP
Provider: An existing connection was forcibly closed by the remote
host. ". (SQL Server Import and Export Wizard) Error 0xc0047038:
Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The
PrimeOutput method on Source - Query returned error code 0xC0202009.
The component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the
component, but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
I am in dataflow destination (OLE DB Destination) screen. I am able to connect to the database and I see the destination tables in the dropdown.
When I click the 'Mappings' option the left, or if I click on 'View existing data' button, I get an error :
Validation error. Data Flow Task: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Communication link failure".
Validation error. Data Flow Task OLE DB Destination [31]: Failed to open a fastload rowset for "[dbo].[xxxxxxxx]". Check that the object exists in the database. xxxxxxxxxxx.dtsx 0 0
Resolved after I closed and reopened Visual Studio. Hadi's solution looks like a good permanent fix.
I upgraded a set of ssis packages from 2005 to 2008r2. the corresponding database has ben upgraded from sql2005 to sql2014. The packages run fine from BIDS. But when i execute them from new sql server agent job ( i have checked the use-32 bit runtime check box)., the package fails with error message as
Executed as user: ADMIN\SvcSQL13DVMDDEW03. Microsoft (R) SQL Server Execute Package Utility Version 10.50.6000.34 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 11:57:06 Error: 2017-07-27 11:57:08.96 Code: 0xC0209302 Source: CBSBankRec50244961Transform Connection manager "TempRBGLINT" Description: SSIS Error Code DTS_E_OLEDB_NOPROVIDER_ERROR. The requested OLE DB provider SQLNCLI10.1 is not registered. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2017-07-27 11:57:08.97 Code: 0x00000008 Source: Check Database Connection Description: The script returned a failure result. End Error Error: 2017-07-27 11:57:24.55 Code: 0xC0202009 Source: CBSBankRec50244961Transform Connection manager "RBGLINT" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [2]. ". End Error Error: 2017-07-27 11:57:24.57 Code: 0xC00291EC Source: Log Package 'Started' Execute SQL Task Description: Failed to acquire connection "RBGLINT". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Error: 2017-07-27 11:57:40.21 Code: 0xC0202009 Source: CBSBankRec50244961Transform Connection manager "RBGLINT" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [2]. ". End Error Error: 2017-07-27 11:57:40.22 Code: 0xC00291EC Source: Log Package 'Failure' Execute SQL Task Description: Failed to acquire connection "RBGLINT". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:57:06 Finished: 11:57:40 Elapsed: 34.102 seconds. The package execution failed. The step failed.
The provider used in the config files for the packages is SQLNCLI10.1 . in the ssis package there is a ole db connection manager - RBGLINT. Just for information - this was automatically upgraded from sql native client \oledb provider to sql native client \ ole db provider 10.0. in the connection manager. I do not see this causing the issue. But just for information.
Any inputs?
From the error message you provided the main error is:
The requested OLE DB provider SQLNCLI10.1 is not registered
From the link below you there is 2 methods for solving this issue:
The requested OLE DB provider SQLNCLI10.1 is not registered
you need to do is to open the connection manager/connection string and edit it to use Native Client 11.0 which is what comes as default with SSIS 2014
Another alternative is to install the Native Client 10.0 from SSIS 2008 installable:
https://blogs.iis.net/rickbarber/installing-sql-server-native-client-10-0
http://www.keepitsimpleandfast.com/2013/04/the-sqlncli10-provider-is-not.html
I'm trying to move files from .txt to SQL Server and got these errors
[OLE DB Destination [35]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
[OLE DB Destination [35]] Error: There was an error with OLE DB Destination.Inputs[OLE DB Destination Input].Columns[effdate] on OLE DB Destination.Inputs[OLE DB Destination Input]. The column status returned was: "The value could not be converted because of a potential loss of data.".