I have 2 web apis (A and B) on my b2c. Each one of them publishes their own permissions respectively (scopeA1, scopeA2) and (scopeB1, scopeB2).
On my web application (which already configured and have granted access permission on both apis and the 4 scopes), in order to get authorization code for both apis during authentication, I tried to set my OpenIdConnectAuthenticationOptionsin scope property to include the 4 scopes.
I got an error AADB2C90146: The scope 'scopeA1 scopeA2 scopeB1 scopeB2 openid offline_access' provided in request specifies more than one resource for an access token, which is not supported.
While if I specify only scopes for web api A or B, then it works as per this link
How can I get my web app to use both web apis even with granted permissions for both
Thanks for help
If the two web APIs are separate applications in Azure AD, then you need to request access tokens separately for them.
I'm not familiar with the sample you used as a starting point, but it looks like these lines are where you need to make your change:
// Retrieve the token using the provided scopes
ConfidentialClientApplication app = new ConfidentialClientApplication(authority, Startup.ClientId,
Startup.RedirectUri, credential,
new NaiveSessionCache(userObjectID, this.HttpContext));
AuthenticationResult result = await app.AcquireTokenSilentAsync(scope);
accessToken = result.Token;
You should create an app instance for each of your APIs, and acquire a token for each of them. Then, when you call the APIs somewhere else, use the correct access token in the Bearer authentication header.
I had the same issue and asked a similar question Extend MSAL to support multiple Web APIs
but i have not had an answer, basically to get around it in the short term i have made both my API's use the same authorization client ID + secret and therefore I can reuse the same scopes accross my APIS
its not what i want but if you want to use Azure AD B2C you need to get used to compromising for a while until the support is there
-- I would also say you are using an older version of MSAL which i am also using, im waiting until the version 1 release before upgrading again.
The github talks about using this format
https://github.com/AzureAD/microsoft-authentication-library-for-dotnet
Step 1: Add MSAL to your Solution/Project
Right click on your project > Manage packages.
Select include prerelease > search msal.
Select the Microsoft.Identity.Client package > install.
Step 2: Instantiate MSAL and Acquire a Token
Create a new PublicClientApplication instance. Make sure to fill in your
app/client id
PublicClientApplication myApp = new PublicClientApplication(CLIENT_ID);
Acquire a token
AuthenticationResult authenticationResult = await
myApp.AcquireTokenAsync(SCOPES).ConfigureAwait(false);
Step 3: Use the token!
The access token can now be used in an HTTP Bearer request.
Related
I have registered an app with Azure AD and can get JWT's but I am receiving claims associated to V1 JWT's according to this whilst I am expecting claims associated to V2 JWT's.
More specifically, I would like to add the azp claim which is only available under V2.
I've followed these instructions to add azp but it is not available to add as an optional claim. I am under the impression that I'm using a version 2 app since the endpoints end with /V2 and I also have the ability to add the ipaddr which is only available for V2 apps as far as I understand.
Can anyone point me to what I am missing?
The version of the access token has nothing to do with the endpoint you use to request the token, but is related to the resource you requested. The default version of ms graph api is the token of version 1.0. If you want to obtain the 2.0 version of the token, you should request your custom api.
First, you need to create an application that represents the api, and then expose the api protected by Azure.
Next,under 'API permissions', give your front-end application access to your backend api:
Under 'API permissions' click on 'Add permission', then click on the
'My APIs' tab.
Find your backend application and select the appropriate scope.
Click 'Add permissions'.
Grant admin consent for your APIs.
Next, go to the manifest of the front-end application and set the accessTokenAcceptedVersion attribute to: 2.
Next, you need to use the auth code flow to obtain an access token,which requires you to log in to the user and obtain the authorization code, and then use the authorization code to redeem the access token.
Parse the token, it will display azp claim and v2.0 version.
Good Day,
Currently I have a single tenent with a React UI and .NET Core Apis secured by Azure Active Directory without any problems.
We have recently moved to a new Azure Tenent, new Active Directory etc. I have create two new App Registrations, one single App Service for UI and one for API. I have linked the App Service to AAD (UI = UI App Registration, API = API App Registration).
The problem is the API is getting a 401 error and I think see that in the original tenent the Bearer token is in a JWT format but in the new instance it's not, I believe it my be a graph api access key.
New Tenent:
Authorization: Bearer PAQABAAAAAAD--DLA3VO7QrddgJg7WevrQvEQVbZEMD8su-tIp9k2bTFUTort7SZgeDI52P6KRYefHgtmj4YrecgUKZJ2wylGuhvIzIz642n7Sg0VMU1RwKtrzWlaMqK62CaSoJcstxiEf6 *****
Orginal Tenent:
Bearer eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6Im5PbzNaRHJPRFhFSzFqS1doWHNsSFJfS1hFZyIsImtpZCI6Im5PbzNaRHJPRFhFSzFqS1doWHNsSFJfS1hFZyJ9.eyJhdWQiOiI3OThkN2ZkOC0zODk2LTQxOGMtOTQ0Ny0wNGFlNTQ2OGFkNDIiLCJpc3MiOiJodHRwczovL3N0cy53aW5kb3dzLm5ldC83ZDE3NTU3Ni03Y2Y3LTQyMDctOTA5My0wNmNiNmQyZDIwNjAvIiwiaWF0IjoxNjE2NDUyNzExLCJuYmYiOjE2MTY0NTI3MTEsImV4cCI6MTYxNjQ1NjYxMSwiYWNyIjoiMSIsImFpbyI6IkFTUUEyLzhUQUFBQU9mejhPZHp *****
Please someone kindly enought to provide some guidance / input where I am going wrong.
Regards
Paul.
When using Azure AD to obtain an access token, an additional resource parameter is required. Otherwise, the access token is not a JWT.
For example, if your web API's application ID URI is https://contoso.com/api and the scope name is Employees.Read.All, then with oidc-client the client configuration should be :
scope: 'openid profile email Employees.Read.All',
extraQueryParams: {
resource: 'https://contoso.com/api'
}
In App Service auth configuration, you can use additionalLoginParams
"additionalLoginParams": ["response_type=code", "resource=https://contoso.com/api"]
If you did not use a custom application ID URI, it may look like
api://868662dd-3e28-4c7f-b7d5-7ec02ac9c601
Quickstart: Configure an application to expose a web API
Firstly, the scope is incorrect.
You should Expose an API in your API App Registration and then add it as a permission in your UI App Registration. You can refer to this document.
And when you try to call the 'https://login.windows.net/{tenant}/oauth2/authorize endpoint, you need to specify the scope to include api://{app id of the API App Registration}. For example: api://{app id of the API App Registration} openid profile email. Then the access token would be for calling your API.
At last, for CORS issue, please configure the CORS as * in your web app to see if it helps.
Try to follow this step: Configure App Service to return a usable access token
In my experience, this problem occurs, when you try to authorize against version 1 of the endpoint.
Instead of calling
https://login.microsoftonline.com/{tenant}/oauth2/authorize
call
https://login.microsoftonline.com/{tenant}/oauth2/v2.0/authorize
You might be required to set something like "metadata URL" in you authorization library to:
https://login.microsoftonline.com/{tenant}/oauth2/v2.0/.well-known/openid-configuration
Make sure your builder follows this order...lifted from our API program.cs
These must be in order of
UseRouting -> UseAuthentication -> UseAuthorisation -> MapControllers
> app.UseRouting()
> app.UseAuthentication()
> app.UseAuthorization()
> app.MapControllers()
If app.UseAuthentication and app.UseAuthorization are not in this order in statement position you Will get 401 Unauthorised as at 01/2023 .Net 6 Core.
At work we are making an SPFx Web Part React client app that deploys to SharePoint as a Web Part. Our back-end is a ASP.NET Core 2.2 Web API that is secured using Azure Portal's built in Authentication feature. The front-end is using AadHttpClient that magically handles the authentication by taking the context of the current page (SharePoint) that has the user already logged in. Doing so, silent authentication occurs and the API call is successfully made with authentication successfully passed. The AadHttpClient is supposed to magically bundle up the token in the request header that gets sent to the back-end Web API. I still need to debug the live development app and see how to retrieve the Bearer Token in the back-end Web API. These are my next probable steps?
Would I just probably use 'string bearerToken = Request.Headers.....;' or 'string bearerToken = Request.Headers["KeyValue"]' to get the token itself?
Assuming I can get this Bearer Token, how can I check the caller's user information? Is it just var userName = User.Identity.Name;? Or would I or could I use the token and some how make a call to Microsoft Graph API to view the user's info?
If you are using ASP.NET Core and using default authentication then things are bit easier. From documentation you can see that several tokens are injected in the request header based on Identity provider so in your case you have to look for following headers which Azure AD injects. These headers would contain ID Token which you would need to verify the claims and get user information.
X-MS-TOKEN-AAD-ID-TOKEN
X-MS-TOKEN-AAD-ACCESS-TOKEN
X-MS-TOKEN-AAD-EXPIRES-ON
X-MS-TOKEN-AAD-REFRESH-TOKEN
Ideally all the claims are injected automatically in ClaimsPrincipal
you can find more here
Official Docs
How To extract Token
I'm having a little trouble following how API Access delegate permissions work with azure active directory. I feel like i'm probably misunderstanding a key aspect of how AAD works.
Here is my set up
I have a Web Application let’s call it WebApp. I have created
an AAD for the Web Application and registered with a AAD App ID. Let’s
call it App ID A
I have a Web Api let’s call it ApiService. I have also created an AAD for it and registered with a AAD App ID. Let’s all it App ID B.
In AAD App ID A, I have updated the clicked on the API Access ->
Required Permissions -> Add (App ID B ; Web API) permissions
I’ve updated the manaifest in the AAD App ID B, to give consent to
knownClientApplications to include the client ID of the Web App
I’ve also enable oauth2AllowImplicitFlow to be true for both App’s
manifest.
What I’m trying to do is, A user signs into the web application sign. When it signs in, the user is able to acquire a token for the specific Web App App ID A. The user should be able to use that token and have access the Api Service with App ID B. I thought by configuring the whole API Access -> Required Permissions within the Web Application it would give me delegate permission with the logged in user to communicate with the Api Service WebApi.
When I examine the JWT token, I notice that there is a claim for Microsoft Graph, but not for the ApiService. Shouldn’t I be seeing a claim?
When I try to use the token, it reacts with a 404 authentication error.
Any advice appreciated,
Thanks,
Derek
UPDATE
In response to #joonasw
I actually looked at the example you wrote when i started.
https://joonasw.net/view/aspnet-core-2-azure-ad-authentication
In the example, the web application is initialized with:
.AddOpenIdConnect(opts =>
{
Configuration.GetSection("OpenIdConnect").Bind(opts);
opts.Events = new OpenIdConnectEvents
{
OnAuthorizationCodeReceived = ctx =>
{
return Task.CompletedTask;
}
};
});
In the HomeController, there is code to retrieve the token for the graph api
private async Task<string> GetAccessTokenAsync()
{
string authority = _authOptions.Authority;
string userId = User.FindFirstValue("http://schemas.microsoft.com/identity/claims/objectidentifier");
var cache = new AdalDistributedTokenCache(_cache, _dataProtectionProvider, userId);
var authContext = new AuthenticationContext(authority, cache);
//App's credentials may be needed if access tokens need to be refreshed with a refresh token
string clientId = _authOptions.ClientId;
string clientSecret = _authOptions.ClientSecret;
var credential = new ClientCredential(clientId, clientSecret);
var result = await authContext.AcquireTokenSilentAsync(
"https://graph.microsoft.com",
credential,
new UserIdentifier(userId, UserIdentifierType.UniqueId));
return result.AccessToken;
}
From my understanding, when the user initially login to the web application it will trigger the OnAuthorizationCodeReceived() method where it will be using the clientId/clientSecret/resource of the web applicaiton. The token is stored in the distributed token cache under the key resource/client id.
In the example, GetAccessTokenAsync() is used to grab the token to access the graph API.
In my case, I was hoping to update that method to retrieve the token for the WebApi which has a different clientId/clientSecret/resoruce. In my case, it will AcquireTokenSilentAsync will throw an AdalTokenAcquisitionExceptionFilter because the token needed is not stored in the cache and in the AdalTokenAcquisitionExceptionFilter it will call try to reauthenticate
context.Result = new ChallengeResult();
which will redirect to the authentication page and then hits the AddOpenIdConnect() method. However, the openIdConnect is configured with the web app clientID/ClientSecret/Resource and will not store the new token properly. It will try to call GetAccessTokenAsync() again and the whole process will go in an infinite loop.
In the example, if you were to comment out the "Anthentication:resource" in app.settings, you will experience the same issue with the infinite loop. What happens is that you initially authenticate correctly with no resource specified. Then when you click on you try to get the token for microsoft graph which is a new resource, it can't find it in the cache and then tries to reauthenticate over and over again.
I also notice that the acquireAsyncAuthentication only returns a AuthenticationResult with a bearer tokentype. How would you get the refresh token in this case?
Any advice?
Thanks,
Derek
UPDATE (Solution)
Thanks to #jaanus. All you have to do is update the resource to the clientid of the web api and pass that into AcquireTokenSilentAsync. The web api id uri that you can get from the azure portal did not work.
Okay, so it seems there are multiple questions here. I'll try to make some sense of this stuff to you.
Adding the "Web App"'s client id to the "ApiService" knownClientApplications is a good idea.
It allows for consent to be done for both apps at the same time. This really only matters for multi-tenant scenarios though.
Now, your Web App will be acquiring access tokens at some point.
When it does, it must specify a resource parameter.
This parameter says to AAD which API you wish to call.
In the case of the "ApiService", you should use either its client id or Application ID URI (this is more common).
Depending on the type of your Web App, the access token is acquired a bit differently.
For "traditional" back-end apps, the Authorization Code Grant flow is usually used.
In this flow your back-end gets an authorization code after the user logs in, and your Web App can then exchange that code for the access token.
In the case of a front-end JavaScript app, you would use the Implicit Grant flow, which you have allowed (no need to enable it in the API by the way).
This one allows you to get access tokens directly from the authorization endpoint (/oauth2/authorize) without talking to the token endpoint as you usually have to.
You can actually get the access token right away after login in the fragment of the URL if you wish.
ADAL.JS makes this quite a lot easier for you if you are going in this route.
The reason you get the authentication error is because the access token is probably meant for Microsoft Graph API. You need to request an access token for your API.
An access token is always only valid for one API.
Had a webapi running on v2 endpoint, the intent was to get access through a single call to both graph and the custom webapi, was using the v2 auth code grant flow, the url using as below,
https://login.microsoftonline.com/common/oauth2/v2.0/authorize?client_id=14e9111f3e1-d220-415d-9bf4-d089f0b5feff&response_type=code&redirect_uri=https%3A%2F%2Flocalhost%3A8081%2Fartifactory%2Fwebapp%2Fsaml%2FloginResponse&response_mode=query&scope=api%3A%2F%2F14e9f3e1-d220-415d-9bf4-d089f0b5feff%2Faccess_as_user%20https%3A%2F%2Fgraph.windows.net%2Fuser.read%20openid%20offline_access&state=12345
with the scope as
api://14e9f3e1-d220-415d-9bf4-d089f0b5feff/access_as_user https://graph.windows.net/user.read openid offline_access
However, keep failing with a invalid scope error. If I take out the custom webapi from the resource, everything went through wonderfully.
Reading further, there is a limitation for webpi that
Web API can receive tokens only from an application that has the same Application ID. You cannot access a Web API from a client that has a different Application ID.
So I am confused, how to archieve the goal to use v2 endpoint to authenticate and get access to both graph and webapi????
--edit
the error message is 'AADSTS65005: The application 'blah' asked for scope 'user.read' that doesn't exist on the resource. Contact the app vendor.'
Today the v2 endpoint cannot issue an access token for a custom API. The feature is in active development, but there's no ETA to share.
Also note: even when the feature will be available, you will not be able to reuse the same access token across multiple resources; you'll be able to consent for multiple resources at once, so that your user is only promoted once, but you will need to request access tokens for each resources separately.