I am not able to connect to my (LocalDb)\v11.0 from OLAP Cube project while deploying because of the SQL Server Browser Service is not running.
I am getting error like
"Error 4 The project could not be deployed to the '(LocalDb)\v11.0' server because of the following connectivity problems : A connection cannot be made to redirector. Ensure that 'SQL Browser' service is running. To verify or update the name of the target server, right-click on the project in Solution Explorer, select Project Properties, click on the Deployment tab, and then enter the name of the server. 0 0"
So I opened the SQL server configuration manager and tried to make the sql server browser service on but I am not able to find it in the configuration manager
Please suggest what should I do?
Related
I tried to deploy SSRS report . i created a report on visual studio .. and also i configured report server configuration manager
when i try to deploy report and open this URL
http://localhost/ReportServer
this shows an error
ERROR
"Reporting Services Error
The report server cannot open a connection to the report server database. The log on failed. (rsReportServerDatabaseLogonFailed) Get Online Help
The user name or password is incorrect. (Exception from HRESULT: 0x8007052E)
SQL Server Reporting Services"
whereas when i click reporting services from sql and connect then connected succesfuuly but after when i left click on server name then same error shows as above on sql
This error occurs when Reporting Services (the report server) cannot connect to the "ReportServer" mssql database, It is not a problem in your report but in the server configuration.
To solve it, run the tool "Reporting Services Configuration Manager" in the PC where MSSQL and SSRS are installed, and review everything is ok.
Specially in the Database tab.
The error "The report server cannot open a connection to the report server database. The log on failed" means that:
The database engine that the report server catalog database host is unaccessable.
The Reporting Services service account has insufficient permissions to the access the report server catalog database.
So, to fix the issue, please follow these steps:
Make sure we are able to connect to the database engine from the report server machine.
a) Ping the database engine server.
b) Try to connect to the database engine using SQL Server Mananger Studio(SSMS)(If we have.). Or, create a .UDL file, try to connect the server from this UDL.
Use the Reporting Services Configuration Manager(RSCM) to check the service account. If the report server is on the different server with the database engine, please use a domain account instead of the local account(Built-in account). Make sure the service account has permissions in the database engine.
Final, please check if the report server is configured correctly. We can easily check that by checking if we can open the Report Manager(http:///reports).
Besides, I would suggest you to go through each steps in the RSCM to make sure the configuration is all fine.
For more information, please see:
Configuring a Report Server Installation (Reporting Services in Native Mode): http://msdn.microsoft.com/en-us/library/ms159624.aspx
I'm new to ETL so I have developed a simple ETL package, and now I'm going to deploy it to a remote server.
I connect to server using SQL Server authentication, so I go to solution explorer and open deployment wizard, in there in destination tab entered my server ip and then it shows me a error message saying
Login failed for user 'MYDOMAIN\MYUSERNAME'. (.Net SqlClient Data Provider)
As I said earlier I want to use SQL Server authentication to connect to my server, where can I change this settings in SSIS ?
Take a look at the link below. I think it should solve your problem.
On the Specify Target SQL Server page, specify the instance of SQL Server to install the packages to and select an authentication mode. If you select SQL Server Authentication, you must provide a user name and a password.
https://technet.microsoft.com/en-us/library/ms141693(v=sql.110).aspx
I installed SQL Server 2008 (not express) on my PC, but when tried to connect with SSMS, got this message:
A network-related or instance specific error occured while established
a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL
Server is configured to allow remote connections.(provider: Named
Pipes Provider, error: 40- Could not open a connection to SQL Server)
(Misrosoft SQL Server, Error 2)
My connection dialog box to SSMS is:
Server type: Database Engine.
Server name: (local)
Authentication: Windows
What should I check? Where to start troubleshooting?
GO TO >> Run Command (Ctrl + r )
Type -- services.msc
go to SQL SERVER >> Right Click >> Click Start
Again Restart SQL SERVER Studio
Here are some troubleshooting tips that you can do:
Try to run your SSMS as admin
Make sure that you are using the correct server name and instance
Check if your sql server service is running by going to run -> services.msc -> Check SQL Server(Instance Name) service if it is running
Error 40 has many reasons, some of them are related to network configurations which are out of scope in your question. Other reasons which may cause this error and has possibility in your question are as follow:
Make sure that SQL SERVER(XXX) service is running by visiting sql server configuration manager section
Make sure that SQL Browser service is running by visiting sql server configuration manager section
Make sure you are using the correct instance name
Read more about this error
If your server is Local. Try to login with server name . or (local).
If you are still not able to login, check Check SQL Server Configuration Manager (Start>All Programs>MS SQL Server>Configuration Tools>Configuration Manager)
I just installed SQL Server 2008 Express on my Vista SP1 machine. I previously had 2005 on here and used it just fine with the old SQL Server Management Studio Express. I was able to connect with no problems to my PC-NAME\SQLEXPRESS instance (no, PC-NAME is not my computer name ;-).
I uninstalled 2005 and SQL Server Management Studio Express. I then installed SQL Server 2008 Express on my machine and elected to have it install SQL Server Management Studio Basic.
Now, when I try to connect to PC-NAME\SQLEXPRESS (with Windows Authentication, like I always did), I get the following message:
Cannot connect to PC-NAME\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
When I installed SQL Server 2008, I had it use SQLEXPRESS as the local instance name. As far as I can tell, through SQL Server Configuration Manager, SQL Server is configured to allow remote connections.
When I went to the help link it mentions, the help page suggests the following:
Make sure that the SQL Server Browser service is started on the server.
Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections.
Well, as far as I can tell, there is no SQL Server Browser service on my system (looked in MMC for one, couldn't find one).
And the SQL Server Surface Area Configuration tool doesn't exist in SQL Server 2008. So good job there with your help documentation, Microsoft ;-).
I'm at a loss for what to do right now. I had a lot of work I was hoping to get done today after upgrading to 2008 (the person I'm working with got it up and running with no problem and told me it would be easy - he's also far better with database stuff that I am). Does anyone have any idea what might be wrong? I'd really appreciate it. If I can't get this working in a few hours, I'm going back to SQL Server 2005 (if that will even work, gah...).
Edit: I have tried turning Windows Firewall off, and that did not help. Also, I noticed that I do not have a "Data" directory under my SQL Server 2008 install directory tree - could I have possibly set something up wrong when I installed it?
Please check the ServerName which you provided. It should match with the below shown Name in the UserName textbox, and that name should followed with \SQLEXPRESS:
Start your Local SQL Server Service
Start SQL Config Manager: Click Start -> Microsoft SQL Server 2008 R2 -> SQL Server
Configuration Manager
Start SQL Services: Set the SQL Server (SQLEXPRESS) and SQL Server Browser services to automatic
start mode. Right-click each service -> Properties -> Go into the Service Tab
This will ensure they start up again if you restart your computer. Please check to ensure the state is "Running" for both services.
Login and authenticate with your Local SQL Server
Now open up SQL Server Management Studio and click "Connect to Object
Explorer" and select Server Name:
[Your PC name]\SQLEXPRESS
Example: 8540P-KL\SQLEXPRESS or (localhost)\SQLEXPRESS
To find your PC name: Right click My Computer -> Properties ->
Computer Name tab
Alternative: Login using windows authentication: Using the user name [Your
Domain]/[Your User Name]
Setup User Account
Create a new Login acct: In SQL Mgmt Studio -> Expand your local Server -> Security -> Right
click on Logins -> New Login
Set Password settings on New User Account: Uncheck Enforce password policy, password expiration and user must
change pw(Since this is local) Default database -> Your Database
Grant roles to New User Account: User Mapping Page -> Map to your db and grant db_owner role Status
Page -> Grant Permission to connect and Enable Login
Setup Access Permissions/Settings for User
Enable all auth modes: Right click your Local Server -> Properties -> Security Tab -> Enable
SQL Server and Windows Authentication Mode
Enable TCP/IP: Open SQL Server Configuration Manager -> SQL Server Network
Configuration -> Protocols for SQLEXPRESS -> Enable TCP/IP
Restart SQL Server Service: You will have to restart the SQL Server(SQLEXPRESS) after enabling TCP/IP
Database Properties File for Spring Project
database.url=jdbc:jtds:sqlserver://[local PC Computer
name];instance=SQLEXPRESS;DatabaseName=[db name];
database.username=[Your user name] database.password=[Your password]
database.driverClassName=net.sourceforge.jtds.jdbc.Driver
If you want to view larger screen shots and better formatting of the answer with more details please view the blog article below:
Setting up a Local Instance of SQL Server 2008 Blog Post:
I used (LocalDB)\MSSQLLocalDB as the server name, I was then able to see all the local databases.
Haha, oh boy, I figured it out. Somehow, someway, I did not install the Database Engine when I installed SQL Server 2008. I have no idea how I missed that, but that's what happened.
I know this question is old, but in case it helps anyone make sure the SQL Server Browser is running in the Services MSC. I installed SQL Server Express 2008 R2 and the SQL Server Browser Service was set to Disabled.
Start->Run->Services.msc
Find "SQL Server Browser"->Right Click->Properties
Set Startup Type to Automatic->Click Apply
Retry your connection.
I've just solved a problem related to this which may help other people.
Initially when loading up MSSMSE it had the server as PC_NAME\SQLEXPRESS and when I tried to connect it gave me Error: 26 - Error Locating Server/Instance Specified, so I went into SQL Server Configuration Manager to check if my SQL Server Browser and SQL Server services were running and set to automatic, only to find that instead of saying SQL Server (SQLEXPRESS) it says SQL Server(MSSQLSERVER).
I then tried connecting to PC-NAME\MSSQLSERVER and this time got SQL Network Interfaces, error: 25 - Connection string is not valid) (MicrosoftSQL Server, Error: 87) The parameter is incorrect so I googled this error and found that somebody had suggested that instead of using PC-NAME\MSSQLSERVER just use PC-NAME as the Server Name at the server connection interface, and this seems to work.
There's a link here http://learningsqlserver.wordpress.com/2011/01/21/what-version-of-sql-server-do-i-have/ which explains that MSSQLSERVER is the default instance and can be connected to by using just your hostname.
I think this may have arisen because I've had SQL Server 2008 installed at some point in the past.
Under Configuration Manager and Network Configuration and Protocols for your instance is TCP/IP Enabled? That could be the problem.
var.connectionstring = "server=localhost; database=dbname; integrated security=yes"
or
var.connectionstring = "server=localhost; database=dbname; login=yourlogin; pwd=yourpass"
For me, I was only able to get it to work by using "." in the server name field; was banging away for awhile trying different combos of the user name and server name. Note that during install of the server (ie this file: SQLEXPR_x64_ENU.exe) i checked default instance which defaults the name to MSSQLSERVER; the above high voted answers might be best used for separate named (ie when you need more than 1) server instances.
both of these videos helped me out:
use dot for server name: https://www.youtube.com/watch?v=DLrxFXXeLFk
general setup: https://www.youtube.com/watch?v=vng0P8Gfx2g
One of the first things that you should check is that the SQL Server (MSSQLSERVER) is started. You can go to the Services Console (services.msc) and look for SQL Server (MSSQLSERVER) to see that it is started. If not, then start the service.
You could also do this through an elevated command prompt by typing net start mssqlserver.
For me it was a windows firewall issue. Allow incoming connections. Opening port didn't work but allow programs did.
Link
Link2
I am in the process of evaluating TFS 2010. I am trying to install onto our application server which sits in a domain and runs Windows 2008 R2 Standard.
We already have a SQL Server in place on a separate Windows 2008 box that I want to use - this is in the same domain.
After installing TFS, I am using the Advanced Configuration Wizard to try and complete the setup. There are 3 bits that are reporting errors : "Database" and "Reporting".
When I enter the SQL Server details, TFS gives me this error :
TF255049: A connection cannot be made to the server that is running SQL Server. Verify that you have entered the correct name for the server, including the instance name, that the server you attempting to connect to is online, and that you have required permissions to connect... (it goes on a bit more)
The server I have installed TFS on is a web server that runs several .Net websites - all of which can connect to the SQL Server with no problem.
I have tried IP Address, machine name, instance name - all report the same error.
Has anybody been in this situation before?
EDIT : Strangely if I go to the "Reporting Server" page in the wizard and enter the SQL Server name, it connects correctly in order to get the Report Server URL and Report Manager URL. So it seems this maybe user account related?
Two things spring to mind:
You'll need to make sure the TFS service accounts have permissions on the DB server.
If Windows Firewall is on on the TFS box, switch it off for a minute or two and try again.
If that solves it, turn it back on and open the SQL ports.
HTH