How can a C socket program be made to communicate online on a Wide Area Network (WAN)? For example, having a server program (in C socket) running on a friend's computer in UK that could be accessed on a computer running a client program(in C socket) located in Russia. I tried my client/server online but it did not work. It only worked on my local machine.
A connection between two computers looks very similar to a phone call, but actually there are lots of details that may turn it into a difficult thing.
Unfortunately, you haven't provided these details. So, let me ask them to you:
Are you connected directly to a telco, using 3G, for instance ? Or are you connected to another device that is connected to the Internet ? For instance, a 3G modem, that offers Wi-Fi connectivity ?
The same questions should be answered by your friend.
These two questions will provide a 1st step to understand and solve your problem.
Good luck, and a fine week for you and family.
Related
This may not be in the right location, so tell me and I'll move it.
I am a recent EE grad and I was hired to build a system that exists on a SoC with a simple 32-bit processor. The system basically monitors several external devices and performs some DSP on it, and then is supposed to send the results using a WiFi device (in my case I have the ESP8266 using UDP) to an email server for logging/notification.
I have been trying to find a library that I can use, but my uC can only program in C and I have it set up for UDP, and everything is in C++ using some other protocol, or something else completely.
I am great at DSP, decent at SoC's and uC's, but when it come to this email server communication thing I am at a loss.
I have successfully configured everything for the sensors, the datapath, the DSP, and connected the system to my WiFi via UDP, but I have yet to figure out how to send data to any servers.
Could someone help me understand how I should go about this?
I have looked into some simple SMTP commands such as HELO, MAIL, RCPT, DATA, etc. but I cannot understand how I actually should implement them in my code.
When I send out the WiFi data via UDP what type of data do I send and how do I format it? Do I need to send any other kind of flags? How should I expect the response? I also know the data has to be transformed into base 64 which is confusing me further.
I am also not super familiar with UDP to begin with, I have been using libraries that are part of the SoC's default library to connect to my WiFi.
I know these may either seem like obvious or stupid questions but it is were I no longer have any knowledge, and everything I find online doesn't make sense, or doesn't attempt to explain it, just gives a pre-made solution
I have found the RFC2821 but it doesn't get any clearer.
I know that's a lot but any help at all would be a lifesaver!
Since you are asking this question, I'm assuming that you are not booting and running an OS suitable for micro-controllers such as an embedded variant of Linux or such. If you were, you would simply be able to take advantage of possibly built in applications or other existing code.
But you don't mention having written an Ethernet stack, so are you using some other library or operating environment which might have some of the functionality needed for an implementation of SMTP?
If you don't and really do need to write your own SMTP client to run directly on the processor you are using, then you should be able to find plenty of examples of source code for this. A quick google search of How To Write an SMTP client showed a few articles with some example code. One article seems to be an exact hit, but you need to look at it further.
However, I would highly suggest just sitting down with a telnet client and connect to an SMTP server you are allowed to use and try the commands you need to just send a message. If you only need to send text, you don't need to get involved in MIME encoding or anything like that.
I am trying to create a client in C that will talk with a BACnet server. This BACnet server is stored on an industrial device (CAN2GO) and I am not sure how I could talk with this device.
I spent quite some time reading documentation for BACnet and I never found a clear example for a BACnet client. I already did some server and clients using TCP and UDP but I don't know how to start this BACnet client and I must say I am getting quite desperate.
I found a library which seems to correspond to what I want which is called BACnet protocol stack but when I tried the whois exemple no device was found (I expected to found the bacnet server but maybe I shouldn't ?).
So my question is : could you give me an exemple in C, or another language but C would be better, that would communicate with a BACnet server (nothing complicated just a question and analysing response). This example could be using the library I just wrote about or if you prefer another library I am of course open to everything.
Thank you very much for your time and answers.
I have used that stack and it is the best open source one you are going to find. If you cannot see anything using the demo\whois\bacwi example from that library, then there is something wrong with your setup. In particular, are you using IP? Are your BACnet client and BACnet server on different machines (they cannot be on the same without some serious tweaking)? Are the two machines on the same IP subnet? (They must be, once again, unless you do some serious tweaking (in this case, setting up BBMDs (BACnet Broadcast Management Devices))).
You will also want to try the "Read Property" example (demo\readprop\bacrp.exe) to actually read a value from the server.
If you are still stuck, then post your detailed problem at the link on Sourceforge, Steve, the author, is very responsive to questions.
I am currently using the stack - just started. I had a little trouble at first, not sure if my problem is the same but.. I basically am using some BAC components made from Schneider Electric (UNC-500) and an old un-supported platform (Niagara R2). On my laptop I created a host server and addressed it to a private LAN network between it and the UNC. My laptop was also using wifi, which was utilizing DHCP, so I had two separate interfaces going. This was my problem. I couldn't read or get 'I-AM' responses back from the UNC. As soon as I turned the WIFI off, I got the 'I-AM' broadcasts. Make sure that you are on the same network as your device, and that there are not other interfaces active. Maybe there is a way to assign the interface to use, IDK. I just started using it.
I'm sure this seems like a simple question but I can't seem to find the answer anywhere. I've been playing with basic client/server code in C, basically the same stuff that's posted on any intro socket programming guide, and no matter how I vary the few lines of code I can't connect two machines over the internet. I can connect locally with 127.0.0.1 and all the examples work fine, but I want to be able to connect two separate hosts.
I've tried using IP addresses - ifconfig and curl ifconfig.me return different IP's for every machine or remote box I have access to and I've been told this means they're all behind NAT which means I can't connect with an explicit IP.
I've tried using username#hostname with gethostbyname() - I've been using whoami and hostname on the serving machine to determine the hostname the client should use, however the DNS always returns an error. How should I determine the hostname I should supply to the client so that I can connect?
Other than that I'm not sure what the issue could be because I'm using the same socket code posted all over the web and I've checked every line many times against several different examples. This has been frustrating me for a long time, any help would be much appreciated.
TL;DR available at the bottom
I've been trying to figure out a way to get two laptops (both running Ubuntu) to be able to pass basic messages back and forth without the need for them to be connected via a wireless network,either by an AP or ad-hoc. I want to reiterate here that ad-hoc networking is not what I'm looking for, I've seen many similar questions here with that as the answer.
I guess what I'm asking is: how do I achieve this? All I really need is for one computer to be able to send a packet, and then for another to pick it up via a packet sniffer of some kind.
Currently: I have both laptops in monitor mode (via a mon0 interface created from aircrack-ng's airmon-ng)so that they can sniff nearby traffic (with Wireshark, tcpdump,tcpcump.org's sample libpcap code, and opening a raw socket and just printing out all the packets. I tried each just because I thought one could be doing something differently/leaving something out). I also have a very basic program that consists of opening a raw socket to send crafted ethernet frames out to the air, but I can't get my two machines to see the other's packets. The sniffer running on each machine can only see the packets going out of that machine (in addition to nearby beacons/control traffic from wifi in the area).
Some things to note that might be important are:
-the packets I'm sending out appear in Wireshark (only on the sending machine) as malformed 802.11 packets (probably because I'm just filling them with junk data for now). I was under the impression that my other laptop would also see them as malformed packets, but it gets nothing
-the sockets I'm using are from a call to socket(PF_PACKET,SOCK_RAW,ETH_P_ALL). Raw sockets are something I just recently was aware of, so I could be misunderstanding how they work, but my impression is that I can craft a layer 2 packet by hand and ship out straight out to the wire/air.
If you're curious as to why I want to do something like this, it's part curiosity, part research for a project I'm working on. I want to streamline / automate the process of setting up an ad-hoc network, and what I'm trying to do here is for the laptops to do a small exchange to figure out the specifics of the adhoc network they are about to create and then make/join that network automatically, instead of either one person explicitly setting up the network OR having both people pre-decide the name, etc of the network and have both computers constantly trying to connect to that specific one.
I'm more interested if I'm going about this process in the right way rather than if my code works or not, if someone thinks me posting my (very basic, taken from another post on Stack Overflow) raw socket code will help, I can.
Edit: I am more than happy to post a complete set of code with instructions if I can get this working. I couldn't find much helpful info on this topic on the internet, and I'd love to put it up for future people trying to do the same thing.
TL;DR I want to send out a packet from one laptop and pick it up on another via a packent sniffer of some sort. No wifi network or ad-hoc network involved. Something akin to spoofing an AP's beacon frame (or similar) for the purpose of sending small amounts of data.
Edit 2:After some thought, perhaps what I'm looking for is some kind of raw 802.11 use? Having direct control of the wifi radio? Is such a thing possible?
I found out I was able to send packets out through my monitor mode interface as long as I had correct 802.11 with radiotap headers. I think the problem I was originally experiencing (not being able to sniff the packets) was because they were malformed and thus not actually getting sent out.
I was able to accomplish this by adapting the example code found here, courtesy of someone named Evan Jones, except I did not need to use an Atheros based card or Madwifi drivers, everything worked fine with the mon0 interface created with aircrack-ng.
I am certain that Apple Mac do this. Apple call it 'bonjour'. There may well be a proper IETF spec for it. This is an Article on Bonjour this is Wikipedia on an open component of bonjour which might help get you moving.
I have a course project where I'm suppose to present some networking stuff. There are great chances that I have to do it on one computer. So my question is, how do I show a communication between tcp/ip or tcp/udp? I'm not a networking expert, I understand the concept of sending data which is red. And I think I need two IP addresses.
You don't need two IP addresses. Just start the server on the machine, and have the client connect to address 127.0.0.1 and the appropriate port. (This address always refers to the same machine the program is running on.)
You can run a virtual machine on your computer and work on network between them.