I am new to the SalesForce and MavenMate installation to the Sublime text. Even I am new to the Sublime Text. I am following the link https://www.xgeek.net/salesforce/sublime-text-3-mavensmate-for-salesforce-development/ to install the mavensmate into sublime and I encountered with the below error:
I am not sure why its giving me the 275309 error. Could any one please give any help?
I only want the correct steps to install mavensmate into sublime.
Oh I got the solution of this issue. As soon as you enter the below code show console and enter then you need to goto the Preferences > Package Control，input “install”, then select “Package Control: Install Package” menu. Done !!. You are OK to go.
import urllib.request,os,hashlib; h = 'df21e130d211cfc94d9b0905775a7c0f' + '1e3d39e33b79698005270310898eea76'; pf = 'Package Control.sublime-package'; ipp = sublime.installed_packages_path(); urllib.request.install_opener( urllib.request.build_opener( urllib.request.ProxyHandler()) ); by = urllib.request.urlopen( 'http://packagecontrol.io/' + pf.replace(' ', '%20')).read(); dh = hashlib.sha256(by).hexdigest(); print('Error validating download (got %s instead of %s), please try manual install' % (dh, h)) if dh != h else open(os.path.join( ipp, pf), 'wb' ).write(by)
Related
Hi can anybody help me parameterize the string word so it will fetch from my yaml. I tried to run however I'm getting an error it shows failed: Using YAML variable files requires PyYAML module to be installed. Typically you can install it by running pip install pyyaml. but I already install pyyaml on my local machine. your response is highly appreciated. Thank you so much
Expected Result: ${String} parameter should get the value from my robot.yaml (Ralph) value
VS Terminal Screenshot:
.robot screenshot
robot.yaml file screenshot:
CMD Screenshot:
In robot.yaml define PYTHONPATH like this:
PYTHONPATH:
- .
- string: "RALPH"
Make sure you have installed PyYAML, then include robot.yaml and collections library in the robot file:
Variables path_to_file/robot.yaml
Library Collections
After this you can extract string value inside the test like this:
${value} = pop from dictionary ${PYTHONPATH[1]} string
log to console ${value}
This will print:
RALPH
Second item in PYTHONPATH list is a dictionary, so you first need to access ${PYTHONPATH[1]} and then pop the needed key (in your case string) in order to return its value.
I've been working with WAMP for 2 years now and it's the first time I got this problem. I created a new website base with Symfony, and now I'm adding some files to it in Windows (by creating a bundle in a console) but it doesn't appear in the browser in localhost even I refresh it, so when I go in /web, I got those errors like these :
( ! ) Fatal error: Uncaught Error: Class 'SNS\PlatformBundle\SNSPlatformBundle' not found in D:\wamp\www\sns_symfony\sns_symfony\app\AppKernel.php on line 20
( ! ) Error: Class 'SNS\PlatformBundle\SNSPlatformBundle' not found in D:\wamp\www\sns_symfony\sns_symfony\app\AppKernel.php on line 20
Call Stack
# Time Memory Function Location
1 0.0010 385736 {main}( ) ...\app.php:0
2 0.0070 418000 AppKernel->handle( ) ...\app.php:19
3 0.0070 418000 AppKernel->boot( ) ...\Kernel.php:195
4 0.0070 418000 AppKernel->initializeBundles( ) ...\Kernel.php:132
5 0.0070 417952 AppKernel->registerBundles( ) ...\Kernel.php:492
Can someone help me please ? ^^'
I'll explain myself more. I used the bundle generator of Symfony so I dind't write anything, juste used the console. By the way there is some folders that WAMP can't see (I don't see them in the browser in localhost) and the file he's looking for are in those folders he can't see. There is the problem.
First of all, double check if the bundle really exists on your hard drive. You're on Windows, so just go to D:\wamp\www\sns_symfony\sns_symfony\src and check if there's a PlatformBundle\SNSPlatformBundle.php in your src dir. If not - now you know the generator didn't generate anything. Maybe accidentally aborted?
Then check if you have right PSR-0 or PSR-4 (most likely ) namespace in your composer.json file. You can run php composer validate to see warnings.
And as the last step run composer dump-autoload which updates the autoload file
Finally I found the solution after hours of deeps researches. Here it is :
Create the bundle
Edit your app/config/config.yml file like (add templating: engines ['twig'] in framework:)
framework:
templating:
engines: ['twig']
Thanks for help people ! :D
SOLVED !
I am trying to hide the CMD window that appears when launching PhantomJS with python:
from selenium import webdriver
browser = webdriver.PhantomJS()
There appears to be a solution when working with C#, however, I was not able to find anything similar for python. Since the feature for C# was added back in 2014, I assume something similar should exist for python too.
I'm using latest PhantomJS and Python 3.6.2.
This is how it looks like:
For me,
The below code works fine.
driver = webdriver.PhantomJS(
service_args=service_args,
desired_capabilities=caps,
executable_path='phantomjs.exe',
service_log_path=None
)
Here you have to add service_log_path=None for no log file that's why the console window will get hidden.
Still Not solved then
replace code from
(C:\Users\YOUR_USER_NAME\AppData\Local\Programs\Python\Python38-32\Lib\site-packages\selenium\webdriver\common\service.py) file
self.process = subprocess.Popen(cmd, env=self.env, close_fds=platform.system() != 'Windows', stdout=self.log_file, stderr=self.log_file, stdin=PIPE)
to
self.process = subprocess.Popen(cmd, stdin=PIPE, stdout=PIPE, stderr=PIPE, shell=False, creationflags=0x08000000)
> Error in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()),
> versionCheck = vI[[j]]) : namespace ‘pbkrtest’ 0.4-2 is being
> loaded, but >= 0.4.4 is required
> Error: package or namespace load
> failed for ‘caret’
Caret was working fine until I tried to load Rcpp and it messed everything up.
I searched the answers for a similar problem with caret but the solutions posted did not seem to work on mine. I followed:
install.packages("caret", dependencies = TRUE)
But it did not work.
I would suggest you to check the R version. I updated the version to 3.5.1 and it works perfectly :)
Mac only – use updateR
Similar to installr, updateR is the package to help updating R on Mac OS.
The R code you will need are the following 5 lines:
install.packages('devtools') #assuming it is not already installed
library(devtools)
install_github('andreacirilloac/updateR')
library(updateR)
updateR(admin_password = 'Admin user password')
I have the same problem with my dynlm package. I get the same error. But as R states pbkrtest is required. This package isn't available under R 3.2.3.
However you can download the package online, look a bit further on this site, the question is already asked on stackoverflow and they gave a site where you can find the packages. Then write the following code:
install.packages("...",repos = NULL, type="source")
install.packages("pbkrtest", dependencies = TRUE)
In the first line, here I wrote the 3 dots you need to write the path to the file where you placed the pbkrtest-package.
I also faced the same problem with caret package and I could solve it as the following:
install.packages("lme4", dependencies = TRUE)
library(lme4)
methods(sigma)
install.packages("pbkrtest", dependencies = TRUE)
library(caret)
This worked for me!
Try
install.packages('DEoptimR')
and followed by
install.packages("caret", dependencies = TRUE)
I had the same issues. Both of these commands worked for me.
I faced the same error with caret and none of the above suggestions helped. My R version was 3.2 and current version is 3.4.
I installed the new version and the issue was resolved
I have faced this issue and tried many ways but followed r console about error thrown and started downloading packages one by one. steps noted down what i did for this. y r studio version is "R version 3.4.4"
First install.packages("caret"), install.packages("ggplot2"), install.packages("lattice"), install.packages("lava")..
then load library(ggplot2) then library(lattice) then library(lava) and then finally library(caret).
What i believe that caret have these packages dependency so once caret is installed ideally 'install.packages('caret', dependencies = TRUE)' should work but it was not working in my R version so i did the step as given above and it worked for me.
hope it may work if someone get this issue
I did try all the above mentioned ways to install and activate caret but none worked for me.
finally what I did was to go to my drive location where R libraries are located. I removed a folder called "caret" and then in R studio I run "remove.packeges("caret")" to remove the caret package.
then I reinstalled the package.
install.packages("caret")
library(caret)
it worked for me.
I'm in R 3.6.1 and got the same error today.
I used this code:
install.packages("caret",dep = TRUE)
install.packages("ggplot2")
install.packages("lattice")
install.packages("lava")
install.packages("purrr")
library(ggplot2)
library(lattice)
library(lava)
library(purrr)
library(caret)
And now it works fine for me. It's all about dependencies that you should install with caret.
Use this:
install.packages(c("ggplot2", "lattice", "lava", "purrr", "caret"))
library(c("ggplot2", "lattice", "lava", "purrr", "caret"))
If that doesn't work, create a folder (R_LIB in this case) on your computer (documents in this case) and include the folder location as follow:
install.packages(c("ggplot2", "lattice", "lava", "purrr", "caret"), lib = "C:/documents/R_LIB")
library(c("ggplot2", "lattice", "lava", "purrr", "caret"), lib = "C:/documents/R_LIB")
I would like to remove and/or deactivate the Emmet package in Sublime Text 2.
Should I just remove the Emmet directory or what is the typical workflow for removal of a package?
If you installed with package control, search for "Package Control: Remove Package" in the command palette (accessed with Ctrl+Shift+P). Otherwise you can just remove the Emmet directory.
If you wish to use a custom caption to access commands, create Default.sublime-commands in your User folder. Then insert something similar to the following.
[
{
"caption": "Package Control: Uninstall Package",
"command": "remove_package"
}
]
Of course, you can customize the command and caption as you see fit.
Just wanted to add, that after you remove the package in question you might also need to check to see if it's listed in the list of packages in the following area and manually remove its listing:
Preferences>Package Settings>Package Control>Settings - User
{
"auto_upgrade_last_run": null,
"installed_packages":
[
"AdvancedNewFile",
"Emmet",
"Package Control",
"SideBarEnhancements",
"Sublimerge"
]
}
In my instance, my trial period for "Sublimerge" had run out and I would get a popup every time I would start Sublime Text 2 saying:
"The package specified, Sublimerge, is not available"
I would have to close the event window out before being able to do anything in ST2.
But in my case, even after successfully removing the package through package control, I still received a event window popup message telling me "Sublimerge" wasn't available. This didn't make any sense as I had successfully removed the package.
It wasn't until I found this "auto_upgrade_last_run" file and manually removed the "Sublimerge" entry and saved my edit, did the message go away.
go to package control by pressing Ctrl + Shift + p
type "remove package"
and type your package/plugin to uninstall and remove it
There are several answers, First IF you are using Package Control simply use Package Control's Remove Package command...
Ctrl+Shift+P
Package Control: Remove Package
If you installed the package manually, and are on a Windows machine...have no fear; Just modify the files manually.
First navigate to
C:\users\[Name]\AppData\Roaming\Sublime Text [version]\
There will be 4 directories:
Installed Packages (Holds the Package Control config file, ignore)
Packages (Holds Package source)
Pristine Packages (Holds the versioning info, ignore)
Settings (Sublime Setting Info, ignore)
First open ..\Packages folder and locate the folder named the same as your package; Delete it.
Secondly, open Sublime and navigate to the Preferences > Package Settings > Package Control > Settings-user
Third, locate the line where the package name you want to "uninstall"
{
"installed_packages":
[
"Alignment",
"All Autocomplete",
"AngularJS",
"AutoFileName",
"BracketHighlighter",
"Browser Support",
"Case Conversion",
"ColorPicker",
"Emmet",
"FileDiffs",
"Format SQL",
"Git",
"Github Tools",
"HTML-CSS-JS Prettify",
"HTML5",
"HTMLBeautify",
"jQuery",
"JsFormat",
"JSHint",
"JsMinifier",
"LiveReload",
"LoremIpsum",
"LoremPixel",
"Oracle PL SQL",
"Package Control",
"Placehold.it Image Tag Generator",
"Placeholders",
"Prefixr",
"Search Stack Overflow",
"SublimeAStyleFormatter",
"SublimeCodeIntel",
"Tag",
"Theme - Centurion",
"TortoiseSVN",
"Zen Tabs"
]
}
NOTE Say the package you are removing is "Zen Tabs", you MUST also remove the , after "TortoiseSVN" or it will error.
Thus concludes the easiest way to remove or Install a Sublime Text Package.
Follow below steps-
Step1 - Ctrl+Shift+P
Step2 - Enter Disable Package
Step3 - enter the package name that you want to disable and press enter
Successfully removed, if not removed then restart Sublime
Simple steps for remove any package from Sublime as phpfmt, Xdebug etc..
1- Go to Sublime menu-> Preference or press Ctrl+Shift+P .
2- Choose -> Remove package option, after you choosing it will display all packge installed in your sublime, select one of them.
3. After selection it will remove, or for better you can restart your system.
Sublime Text 3
Procedure
Run Sublime Text.
Select Preferences → Package Control.
Or
Use ctrl+shift+p shortcut for (Win, Linux) or cmd+shift+p for (OS X).
Select Remove Package. Package Control: Remove Package
Start typing name of the package you want to remove and select it from the list of installed packages.
Wait for the uninstallation to complete.