Related
I need to remove duplicate rows from a fairly large SQL Server table (i.e. 300,000+ rows).
The rows, of course, will not be perfect duplicates because of the existence of the RowID identity field.
MyTable
RowID int not null identity(1,1) primary key,
Col1 varchar(20) not null,
Col2 varchar(2048) not null,
Col3 tinyint not null
How can I do this?
Assuming no nulls, you GROUP BY the unique columns, and SELECT the MIN (or MAX) RowId as the row to keep. Then, just delete everything that didn't have a row id:
DELETE FROM MyTable
LEFT OUTER JOIN (
SELECT MIN(RowId) as RowId, Col1, Col2, Col3
FROM MyTable
GROUP BY Col1, Col2, Col3
) as KeepRows ON
MyTable.RowId = KeepRows.RowId
WHERE
KeepRows.RowId IS NULL
In case you have a GUID instead of an integer, you can replace
MIN(RowId)
with
CONVERT(uniqueidentifier, MIN(CONVERT(char(36), MyGuidColumn)))
Another possible way of doing this is
;
--Ensure that any immediately preceding statement is terminated with a semicolon above
WITH cte
AS (SELECT ROW_NUMBER() OVER (PARTITION BY Col1, Col2, Col3
ORDER BY ( SELECT 0)) RN
FROM #MyTable)
DELETE FROM cte
WHERE RN > 1;
I am using ORDER BY (SELECT 0) above as it is arbitrary which row to preserve in the event of a tie.
To preserve the latest one in RowID order for example you could use ORDER BY RowID DESC
Execution Plans
The execution plan for this is often simpler and more efficient than that in the accepted answer as it does not require the self join.
This is not always the case however. One place where the GROUP BY solution might be preferred is situations where a hash aggregate would be chosen in preference to a stream aggregate.
The ROW_NUMBER solution will always give pretty much the same plan whereas the GROUP BY strategy is more flexible.
Factors which might favour the hash aggregate approach would be
No useful index on the partitioning columns
relatively fewer groups with relatively more duplicates in each group
In extreme versions of this second case (if there are very few groups with many duplicates in each) one could also consider simply inserting the rows to keep into a new table then TRUNCATE-ing the original and copying them back to minimise logging compared to deleting a very high proportion of the rows.
There's a good article on removing duplicates on the Microsoft Support site. It's pretty conservative - they have you do everything in separate steps - but it should work well against large tables.
I've used self-joins to do this in the past, although it could probably be prettied up with a HAVING clause:
DELETE dupes
FROM MyTable dupes, MyTable fullTable
WHERE dupes.dupField = fullTable.dupField
AND dupes.secondDupField = fullTable.secondDupField
AND dupes.uniqueField > fullTable.uniqueField
The following query is useful to delete duplicate rows. The table in this example has ID as an identity column and the columns which have duplicate data are Column1, Column2 and Column3.
DELETE FROM TableName
WHERE ID NOT IN (SELECT MAX(ID)
FROM TableName
GROUP BY Column1,
Column2,
Column3
/*Even if ID is not null-able SQL Server treats MAX(ID) as potentially
nullable. Because of semantics of NOT IN (NULL) including the clause
below can simplify the plan*/
HAVING MAX(ID) IS NOT NULL)
The following script shows usage of GROUP BY, HAVING, ORDER BY in one query, and returns the results with duplicate column and its count.
SELECT YourColumnName,
COUNT(*) TotalCount
FROM YourTableName
GROUP BY YourColumnName
HAVING COUNT(*) > 1
ORDER BY COUNT(*) DESC
delete t1
from table t1, table t2
where t1.columnA = t2.columnA
and t1.rowid>t2.rowid
Postgres:
delete
from table t1
using table t2
where t1.columnA = t2.columnA
and t1.rowid > t2.rowid
DELETE LU
FROM (SELECT *,
Row_number()
OVER (
partition BY col1, col1, col3
ORDER BY rowid DESC) [Row]
FROM mytable) LU
WHERE [row] > 1
This will delete duplicate rows, except the first row
DELETE
FROM
Mytable
WHERE
RowID NOT IN (
SELECT
MIN(RowID)
FROM
Mytable
GROUP BY
Col1,
Col2,
Col3
)
Refer (http://www.codeproject.com/Articles/157977/Remove-Duplicate-Rows-from-a-Table-in-SQL-Server)
I would prefer CTE for deleting duplicate rows from sql server table
strongly recommend to follow this article ::http://codaffection.com/sql-server-article/delete-duplicate-rows-in-sql-server/
by keeping original
WITH CTE AS
(
SELECT *,ROW_NUMBER() OVER (PARTITION BY col1,col2,col3 ORDER BY col1,col2,col3) AS RN
FROM MyTable
)
DELETE FROM CTE WHERE RN<>1
without keeping original
WITH CTE AS
(SELECT *,R=RANK() OVER (ORDER BY col1,col2,col3)
FROM MyTable)
DELETE CTE
WHERE R IN (SELECT R FROM CTE GROUP BY R HAVING COUNT(*)>1)
To Fetch Duplicate Rows:
SELECT
name, email, COUNT(*)
FROM
users
GROUP BY
name, email
HAVING COUNT(*) > 1
To Delete the Duplicate Rows:
DELETE users
WHERE rowid NOT IN
(SELECT MIN(rowid)
FROM users
GROUP BY name, email);
Quick and Dirty to delete exact duplicated rows (for small tables):
select distinct * into t2 from t1;
delete from t1;
insert into t1 select * from t2;
drop table t2;
I prefer the subquery\having count(*) > 1 solution to the inner join because I found it easier to read and it was very easy to turn into a SELECT statement to verify what would be deleted before you run it.
--DELETE FROM table1
--WHERE id IN (
SELECT MIN(id) FROM table1
GROUP BY col1, col2, col3
-- could add a WHERE clause here to further filter
HAVING count(*) > 1
--)
SELECT DISTINCT *
INTO tempdb.dbo.tmpTable
FROM myTable
TRUNCATE TABLE myTable
INSERT INTO myTable SELECT * FROM tempdb.dbo.tmpTable
DROP TABLE tempdb.dbo.tmpTable
I thought I'd share my solution since it works under special circumstances.
I my case the table with duplicate values did not have a foreign key (because the values were duplicated from another db).
begin transaction
-- create temp table with identical structure as source table
Select * Into #temp From tableName Where 1 = 2
-- insert distinct values into temp
insert into #temp
select distinct *
from tableName
-- delete from source
delete from tableName
-- insert into source from temp
insert into tableName
select *
from #temp
rollback transaction
-- if this works, change rollback to commit and execute again to keep you changes!!
PS: when working on things like this I always use a transaction, this not only ensures everything is executed as a whole, but also allows me to test without risking anything. But off course you should take a backup anyway just to be sure...
This query showed very good performance for me:
DELETE tbl
FROM
MyTable tbl
WHERE
EXISTS (
SELECT
*
FROM
MyTable tbl2
WHERE
tbl2.SameValue = tbl.SameValue
AND tbl.IdUniqueValue < tbl2.IdUniqueValue
)
it deleted 1M rows in little more than 30sec from a table of 2M (50% duplicates)
Using CTE. The idea is to join on one or more columns that form a duplicate record and then remove whichever you like:
;with cte as (
select
min(PrimaryKey) as PrimaryKey
UniqueColumn1,
UniqueColumn2
from dbo.DuplicatesTable
group by
UniqueColumn1, UniqueColumn1
having count(*) > 1
)
delete d
from dbo.DuplicatesTable d
inner join cte on
d.PrimaryKey > cte.PrimaryKey and
d.UniqueColumn1 = cte.UniqueColumn1 and
d.UniqueColumn2 = cte.UniqueColumn2;
Yet another easy solution can be found at the link pasted here. This one easy to grasp and seems to be effective for most of the similar problems. It is for SQL Server though but the concept used is more than acceptable.
Here are the relevant portions from the linked page:
Consider this data:
EMPLOYEE_ID ATTENDANCE_DATE
A001 2011-01-01
A001 2011-01-01
A002 2011-01-01
A002 2011-01-01
A002 2011-01-01
A003 2011-01-01
So how can we delete those duplicate data?
First, insert an identity column in that table by using the following code:
ALTER TABLE dbo.ATTENDANCE ADD AUTOID INT IDENTITY(1,1)
Use the following code to resolve it:
DELETE FROM dbo.ATTENDANCE WHERE AUTOID NOT IN (SELECT MIN(AUTOID) _
FROM dbo.ATTENDANCE GROUP BY EMPLOYEE_ID,ATTENDANCE_DATE)
This is the easiest way to delete duplicate record
DELETE FROM tblemp WHERE id IN
(
SELECT MIN(id) FROM tblemp
GROUP BY title HAVING COUNT(id)>1
)
Use this
WITH tblTemp as
(
SELECT ROW_NUMBER() Over(PARTITION BY Name,Department ORDER BY Name)
As RowNumber,* FROM <table_name>
)
DELETE FROM tblTemp where RowNumber >1
Here is another good article on removing duplicates.
It discusses why its hard: "SQL is based on relational algebra, and duplicates cannot occur in relational algebra, because duplicates are not allowed in a set."
The temp table solution, and two mysql examples.
In the future are you going to prevent it at a database level, or from an application perspective. I would suggest the database level because your database should be responsible for maintaining referential integrity, developers just will cause problems ;)
I had a table where I needed to preserve non-duplicate rows.
I'm not sure on the speed or efficiency.
DELETE FROM myTable WHERE RowID IN (
SELECT MIN(RowID) AS IDNo FROM myTable
GROUP BY Col1, Col2, Col3
HAVING COUNT(*) = 2 )
Oh sure. Use a temp table. If you want a single, not-very-performant statement that "works" you can go with:
DELETE FROM MyTable WHERE NOT RowID IN
(SELECT
(SELECT TOP 1 RowID FROM MyTable mt2
WHERE mt2.Col1 = mt.Col1
AND mt2.Col2 = mt.Col2
AND mt2.Col3 = mt.Col3)
FROM MyTable mt)
Basically, for each row in the table, the sub-select finds the top RowID of all rows that are exactly like the row under consideration. So you end up with a list of RowIDs that represent the "original" non-duplicated rows.
The other way is Create a new table with same fields and with Unique Index. Then move all data from old table to new table. Automatically SQL SERVER ignore (there is also an option about what to do if there will be a duplicate value: ignore, interrupt or sth) duplicate values. So we have the same table without duplicate rows. If you don't want Unique Index, after the transfer data you can drop it.
Especially for larger tables you may use DTS (SSIS package to import/export data) in order to transfer all data rapidly to your new uniquely indexed table. For 7 million row it takes just a few minute.
By useing below query we can able to delete duplicate records based on the single column or multiple column. below query is deleting based on two columns. table name is: testing and column names empno,empname
DELETE FROM testing WHERE empno not IN (SELECT empno FROM (SELECT empno, ROW_NUMBER() OVER (PARTITION BY empno ORDER BY empno)
AS [ItemNumber] FROM testing) a WHERE ItemNumber > 1)
or empname not in
(select empname from (select empname,row_number() over(PARTITION BY empno ORDER BY empno)
AS [ItemNumber] FROM testing) a WHERE ItemNumber > 1)
Create new blank table with the same structure
Execute query like this
INSERT INTO tc_category1
SELECT *
FROM tc_category
GROUP BY category_id, application_id
HAVING count(*) > 1
Then execute this query
INSERT INTO tc_category1
SELECT *
FROM tc_category
GROUP BY category_id, application_id
HAVING count(*) = 1
Another way of doing this :--
DELETE A
FROM TABLE A,
TABLE B
WHERE A.COL1 = B.COL1
AND A.COL2 = B.COL2
AND A.UNIQUEFIELD > B.UNIQUEFIELD
I would mention this approach as well as it can be helpful, and works in all SQL servers:
Pretty often there is only one - two duplicates, and Ids and count of duplicates are known. In this case:
SET ROWCOUNT 1 -- or set to number of rows to be deleted
delete from myTable where RowId = DuplicatedID
SET ROWCOUNT 0
From the application level (unfortunately). I agree that the proper way to prevent duplication is at the database level through the use of a unique index, but in SQL Server 2005, an index is allowed to be only 900 bytes, and my varchar(2048) field blows that away.
I dunno how well it would perform, but I think you could write a trigger to enforce this, even if you couldn't do it directly with an index. Something like:
-- given a table stories(story_id int not null primary key, story varchar(max) not null)
CREATE TRIGGER prevent_plagiarism
ON stories
after INSERT, UPDATE
AS
DECLARE #cnt AS INT
SELECT #cnt = Count(*)
FROM stories
INNER JOIN inserted
ON ( stories.story = inserted.story
AND stories.story_id != inserted.story_id )
IF #cnt > 0
BEGIN
RAISERROR('plagiarism detected',16,1)
ROLLBACK TRANSACTION
END
Also, varchar(2048) sounds fishy to me (some things in life are 2048 bytes, but it's pretty uncommon); should it really not be varchar(max)?
DELETE
FROM
table_name T1
WHERE
rowid > (
SELECT
min(rowid)
FROM
table_name T2
WHERE
T1.column_name = T2.column_name
);
CREATE TABLE car(Id int identity(1,1), PersonId int, CarId int)
INSERT INTO car(PersonId,CarId)
VALUES(1,2),(1,3),(1,2),(2,4)
--SELECT * FROM car
;WITH CTE as(
SELECT ROW_NUMBER() over (PARTITION BY personid,carid order by personid,carid) as rn,Id,PersonID,CarId from car)
DELETE FROM car where Id in(SELECT Id FROM CTE WHERE rn>1)
I you want to preview the rows you are about to remove and keep control over which of the duplicate rows to keep. See http://developer.azurewebsites.net/2014/09/better-sql-group-by-find-duplicate-data/
with MYCTE as (
SELECT ROW_NUMBER() OVER (
PARTITION BY DuplicateKey1
,DuplicateKey2 -- optional
ORDER BY CreatedAt -- the first row among duplicates will be kept, other rows will be removed
) RN
FROM MyTable
)
DELETE FROM MYCTE
WHERE RN > 1
I used following query in SQL Server 2000
SELECT
U.FirstName,
SUM(VE.Score)AS Score, SUM(VE.QuizTime) AS Time,
SUM(VE.IsQuizType) AS QuizesAttempted,
SUM(VE.IsProgrammingType) AS ProgrammingProblemsAttempted
from
Users U INNER JOIN VirtualExercise VE on U.UserID=VE.UserID
where U.UserID IN( 10,11 ) AND ProgramID = 2
group by U.FirstName
order by VE.Score desc
It working fine in SQL Server 2000 but not working in SQL Server 2005.
Gives following error:
Column "VirtualExercise.Score" is
invalid in the ORDER BY clause because
it is not contained in either an
aggregate function or the GROUP BY
clause. --- Inner Exception
Please help...
SQL Server 2005 is correct: you are trying to order by a value that doesn't exist in the output because you must either GROUP on it or aggregate it. VE.Score is neither. SQL Server 2000 allowed some ambiguities like this (edit: see "ORDER BY clause" at http://msdn.microsoft.com/en-us/library/ms143359(SQL.90).aspx for info on this)
I assume you mean
ORDER BY SUM(VE.Score) DESC
SQL Server 2000 is kind of dumb where it comes to table and column aliases in the result set. Provided an explicit alias column is introduced (e.g. Score in your case, Col3 in the example below), it doesn't matter what table alias you use in the ORDER BY clause:
create table #T1 (
ID int not null primary key,
Col1 varchar(10) not null
)
go
create table #T2 (
ID int not null primary key,
Col2 varchar(10) not null
)
go
insert into #T1 (ID,Col1)
select 1,'abc' union all
select 2,'def'
go
insert into #T2 (ID,Col2)
select 1,'zyx' union all
select 2,'wvu'
go
select *,1 as Col3 from #T1 t1 inner join #T2 t2 on t1.ID = t2.ID order by t2.Col3
Since you presumably want to sort by the computed Score column, just remove the VE. prefix.
Since you have defined SUM(VE.Score)AS Score in select , do you mean ORDER BY Score DESC
I have two table
first:
Table: TBL#Sell
SellId ClientId ProductId
1 3
3 5
4 6
second:
Table: TBL#Sell2
SellId ClientId ProductId
Now I want to copy every record of first table to second one.
"SellId" column in second table (Sell2.SellId) is Auto Increment (Identity).
for any insert the TBL#Sell2.SellId will set with new identity and i must store the identity in TBL#Sell1.SellId
Is it clear?
What is the solution? , plz.
thanks
I want to store TBL#Sell2.SellId in TBL#Sell.SellId
You can use triggers :
http://msdn.microsoft.com/en-us/magazine/cc164047.aspx
http://msdn.microsoft.com/en-us/library/aa258254(v=sql.80).aspx
Look at the OUTPUT clause in Books Online.
It TBL#Sell2 is empty you basically only want to give a number to each row in TBL#Sell. You can do that without using TBL#Sell2.
Add a temporary identity column, move the values to to SellId, remove the temp column.
alter table TBL#Sell add SellId_tmp int not null identity
go
update TBL#Sell set SellId = SellId_tmp
go
alter table TBL#Sell drop column SellId_tmp
Another way is to use a CTE with row_number().
;with cte as
(
select *,
row_number() over(order by (select(1))) as rn
from TBL#Sell
)
update cte set
SellId = rn
I think you have more ways to perform this task.
You could write a stored procedure that for every record in table1 write to table2 and then update table1 getting the identity value from SCOPE_IDENTITY()
Or another way could be, if the couple ClientId/ProductId is a key, to do an insert and then an update with something like that:
insert into TBL#Sell2
select SellId, ClientId, ProductId from TBL#Sell
upadte TBL#Sell
set TBL#Sell.SellId = TBL#Sell2.SellId
from TBL#Sell T1 join TBL#Sell2 T2
on T1.ClientId = T2.ClientId and T1.ProductId = T2.ProductId
EDIT Replaced ##Identity with SCOPE_IDENTITY
I have a requirement to determine the maximum Id int value for a set of tables in my database. The column is always 'Id' and is the primary key. Is there a simple way I can make this determination without resorting to a cursor or looping?
SELECT MAX(MaxId) As MaxId FROM (
SELECT MAX(id) AS MaxId FROM Table1
UNION ALL
SELECT MAX(id) AS MaxId FROM Table2
) AS T1
could you create a sp_excutesql query for something like?
select max(id) from (
select id from t1
union all
select id from t2
union all
select id from t3)
Possibly by putting the table names into a temp table/cte to start with?
Actually think there is a loop happening.
I need to remove duplicate rows from a fairly large SQL Server table (i.e. 300,000+ rows).
The rows, of course, will not be perfect duplicates because of the existence of the RowID identity field.
MyTable
RowID int not null identity(1,1) primary key,
Col1 varchar(20) not null,
Col2 varchar(2048) not null,
Col3 tinyint not null
How can I do this?
Assuming no nulls, you GROUP BY the unique columns, and SELECT the MIN (or MAX) RowId as the row to keep. Then, just delete everything that didn't have a row id:
DELETE FROM MyTable
LEFT OUTER JOIN (
SELECT MIN(RowId) as RowId, Col1, Col2, Col3
FROM MyTable
GROUP BY Col1, Col2, Col3
) as KeepRows ON
MyTable.RowId = KeepRows.RowId
WHERE
KeepRows.RowId IS NULL
In case you have a GUID instead of an integer, you can replace
MIN(RowId)
with
CONVERT(uniqueidentifier, MIN(CONVERT(char(36), MyGuidColumn)))
Another possible way of doing this is
;
--Ensure that any immediately preceding statement is terminated with a semicolon above
WITH cte
AS (SELECT ROW_NUMBER() OVER (PARTITION BY Col1, Col2, Col3
ORDER BY ( SELECT 0)) RN
FROM #MyTable)
DELETE FROM cte
WHERE RN > 1;
I am using ORDER BY (SELECT 0) above as it is arbitrary which row to preserve in the event of a tie.
To preserve the latest one in RowID order for example you could use ORDER BY RowID DESC
Execution Plans
The execution plan for this is often simpler and more efficient than that in the accepted answer as it does not require the self join.
This is not always the case however. One place where the GROUP BY solution might be preferred is situations where a hash aggregate would be chosen in preference to a stream aggregate.
The ROW_NUMBER solution will always give pretty much the same plan whereas the GROUP BY strategy is more flexible.
Factors which might favour the hash aggregate approach would be
No useful index on the partitioning columns
relatively fewer groups with relatively more duplicates in each group
In extreme versions of this second case (if there are very few groups with many duplicates in each) one could also consider simply inserting the rows to keep into a new table then TRUNCATE-ing the original and copying them back to minimise logging compared to deleting a very high proportion of the rows.
There's a good article on removing duplicates on the Microsoft Support site. It's pretty conservative - they have you do everything in separate steps - but it should work well against large tables.
I've used self-joins to do this in the past, although it could probably be prettied up with a HAVING clause:
DELETE dupes
FROM MyTable dupes, MyTable fullTable
WHERE dupes.dupField = fullTable.dupField
AND dupes.secondDupField = fullTable.secondDupField
AND dupes.uniqueField > fullTable.uniqueField
The following query is useful to delete duplicate rows. The table in this example has ID as an identity column and the columns which have duplicate data are Column1, Column2 and Column3.
DELETE FROM TableName
WHERE ID NOT IN (SELECT MAX(ID)
FROM TableName
GROUP BY Column1,
Column2,
Column3
/*Even if ID is not null-able SQL Server treats MAX(ID) as potentially
nullable. Because of semantics of NOT IN (NULL) including the clause
below can simplify the plan*/
HAVING MAX(ID) IS NOT NULL)
The following script shows usage of GROUP BY, HAVING, ORDER BY in one query, and returns the results with duplicate column and its count.
SELECT YourColumnName,
COUNT(*) TotalCount
FROM YourTableName
GROUP BY YourColumnName
HAVING COUNT(*) > 1
ORDER BY COUNT(*) DESC
delete t1
from table t1, table t2
where t1.columnA = t2.columnA
and t1.rowid>t2.rowid
Postgres:
delete
from table t1
using table t2
where t1.columnA = t2.columnA
and t1.rowid > t2.rowid
DELETE LU
FROM (SELECT *,
Row_number()
OVER (
partition BY col1, col1, col3
ORDER BY rowid DESC) [Row]
FROM mytable) LU
WHERE [row] > 1
This will delete duplicate rows, except the first row
DELETE
FROM
Mytable
WHERE
RowID NOT IN (
SELECT
MIN(RowID)
FROM
Mytable
GROUP BY
Col1,
Col2,
Col3
)
Refer (http://www.codeproject.com/Articles/157977/Remove-Duplicate-Rows-from-a-Table-in-SQL-Server)
I would prefer CTE for deleting duplicate rows from sql server table
strongly recommend to follow this article ::http://codaffection.com/sql-server-article/delete-duplicate-rows-in-sql-server/
by keeping original
WITH CTE AS
(
SELECT *,ROW_NUMBER() OVER (PARTITION BY col1,col2,col3 ORDER BY col1,col2,col3) AS RN
FROM MyTable
)
DELETE FROM CTE WHERE RN<>1
without keeping original
WITH CTE AS
(SELECT *,R=RANK() OVER (ORDER BY col1,col2,col3)
FROM MyTable)
DELETE CTE
WHERE R IN (SELECT R FROM CTE GROUP BY R HAVING COUNT(*)>1)
To Fetch Duplicate Rows:
SELECT
name, email, COUNT(*)
FROM
users
GROUP BY
name, email
HAVING COUNT(*) > 1
To Delete the Duplicate Rows:
DELETE users
WHERE rowid NOT IN
(SELECT MIN(rowid)
FROM users
GROUP BY name, email);
Quick and Dirty to delete exact duplicated rows (for small tables):
select distinct * into t2 from t1;
delete from t1;
insert into t1 select * from t2;
drop table t2;
I prefer the subquery\having count(*) > 1 solution to the inner join because I found it easier to read and it was very easy to turn into a SELECT statement to verify what would be deleted before you run it.
--DELETE FROM table1
--WHERE id IN (
SELECT MIN(id) FROM table1
GROUP BY col1, col2, col3
-- could add a WHERE clause here to further filter
HAVING count(*) > 1
--)
SELECT DISTINCT *
INTO tempdb.dbo.tmpTable
FROM myTable
TRUNCATE TABLE myTable
INSERT INTO myTable SELECT * FROM tempdb.dbo.tmpTable
DROP TABLE tempdb.dbo.tmpTable
I thought I'd share my solution since it works under special circumstances.
I my case the table with duplicate values did not have a foreign key (because the values were duplicated from another db).
begin transaction
-- create temp table with identical structure as source table
Select * Into #temp From tableName Where 1 = 2
-- insert distinct values into temp
insert into #temp
select distinct *
from tableName
-- delete from source
delete from tableName
-- insert into source from temp
insert into tableName
select *
from #temp
rollback transaction
-- if this works, change rollback to commit and execute again to keep you changes!!
PS: when working on things like this I always use a transaction, this not only ensures everything is executed as a whole, but also allows me to test without risking anything. But off course you should take a backup anyway just to be sure...
This query showed very good performance for me:
DELETE tbl
FROM
MyTable tbl
WHERE
EXISTS (
SELECT
*
FROM
MyTable tbl2
WHERE
tbl2.SameValue = tbl.SameValue
AND tbl.IdUniqueValue < tbl2.IdUniqueValue
)
it deleted 1M rows in little more than 30sec from a table of 2M (50% duplicates)
Using CTE. The idea is to join on one or more columns that form a duplicate record and then remove whichever you like:
;with cte as (
select
min(PrimaryKey) as PrimaryKey
UniqueColumn1,
UniqueColumn2
from dbo.DuplicatesTable
group by
UniqueColumn1, UniqueColumn1
having count(*) > 1
)
delete d
from dbo.DuplicatesTable d
inner join cte on
d.PrimaryKey > cte.PrimaryKey and
d.UniqueColumn1 = cte.UniqueColumn1 and
d.UniqueColumn2 = cte.UniqueColumn2;
Yet another easy solution can be found at the link pasted here. This one easy to grasp and seems to be effective for most of the similar problems. It is for SQL Server though but the concept used is more than acceptable.
Here are the relevant portions from the linked page:
Consider this data:
EMPLOYEE_ID ATTENDANCE_DATE
A001 2011-01-01
A001 2011-01-01
A002 2011-01-01
A002 2011-01-01
A002 2011-01-01
A003 2011-01-01
So how can we delete those duplicate data?
First, insert an identity column in that table by using the following code:
ALTER TABLE dbo.ATTENDANCE ADD AUTOID INT IDENTITY(1,1)
Use the following code to resolve it:
DELETE FROM dbo.ATTENDANCE WHERE AUTOID NOT IN (SELECT MIN(AUTOID) _
FROM dbo.ATTENDANCE GROUP BY EMPLOYEE_ID,ATTENDANCE_DATE)
This is the easiest way to delete duplicate record
DELETE FROM tblemp WHERE id IN
(
SELECT MIN(id) FROM tblemp
GROUP BY title HAVING COUNT(id)>1
)
Use this
WITH tblTemp as
(
SELECT ROW_NUMBER() Over(PARTITION BY Name,Department ORDER BY Name)
As RowNumber,* FROM <table_name>
)
DELETE FROM tblTemp where RowNumber >1
Here is another good article on removing duplicates.
It discusses why its hard: "SQL is based on relational algebra, and duplicates cannot occur in relational algebra, because duplicates are not allowed in a set."
The temp table solution, and two mysql examples.
In the future are you going to prevent it at a database level, or from an application perspective. I would suggest the database level because your database should be responsible for maintaining referential integrity, developers just will cause problems ;)
I had a table where I needed to preserve non-duplicate rows.
I'm not sure on the speed or efficiency.
DELETE FROM myTable WHERE RowID IN (
SELECT MIN(RowID) AS IDNo FROM myTable
GROUP BY Col1, Col2, Col3
HAVING COUNT(*) = 2 )
Oh sure. Use a temp table. If you want a single, not-very-performant statement that "works" you can go with:
DELETE FROM MyTable WHERE NOT RowID IN
(SELECT
(SELECT TOP 1 RowID FROM MyTable mt2
WHERE mt2.Col1 = mt.Col1
AND mt2.Col2 = mt.Col2
AND mt2.Col3 = mt.Col3)
FROM MyTable mt)
Basically, for each row in the table, the sub-select finds the top RowID of all rows that are exactly like the row under consideration. So you end up with a list of RowIDs that represent the "original" non-duplicated rows.
The other way is Create a new table with same fields and with Unique Index. Then move all data from old table to new table. Automatically SQL SERVER ignore (there is also an option about what to do if there will be a duplicate value: ignore, interrupt or sth) duplicate values. So we have the same table without duplicate rows. If you don't want Unique Index, after the transfer data you can drop it.
Especially for larger tables you may use DTS (SSIS package to import/export data) in order to transfer all data rapidly to your new uniquely indexed table. For 7 million row it takes just a few minute.
By useing below query we can able to delete duplicate records based on the single column or multiple column. below query is deleting based on two columns. table name is: testing and column names empno,empname
DELETE FROM testing WHERE empno not IN (SELECT empno FROM (SELECT empno, ROW_NUMBER() OVER (PARTITION BY empno ORDER BY empno)
AS [ItemNumber] FROM testing) a WHERE ItemNumber > 1)
or empname not in
(select empname from (select empname,row_number() over(PARTITION BY empno ORDER BY empno)
AS [ItemNumber] FROM testing) a WHERE ItemNumber > 1)
Create new blank table with the same structure
Execute query like this
INSERT INTO tc_category1
SELECT *
FROM tc_category
GROUP BY category_id, application_id
HAVING count(*) > 1
Then execute this query
INSERT INTO tc_category1
SELECT *
FROM tc_category
GROUP BY category_id, application_id
HAVING count(*) = 1
Another way of doing this :--
DELETE A
FROM TABLE A,
TABLE B
WHERE A.COL1 = B.COL1
AND A.COL2 = B.COL2
AND A.UNIQUEFIELD > B.UNIQUEFIELD
I would mention this approach as well as it can be helpful, and works in all SQL servers:
Pretty often there is only one - two duplicates, and Ids and count of duplicates are known. In this case:
SET ROWCOUNT 1 -- or set to number of rows to be deleted
delete from myTable where RowId = DuplicatedID
SET ROWCOUNT 0
From the application level (unfortunately). I agree that the proper way to prevent duplication is at the database level through the use of a unique index, but in SQL Server 2005, an index is allowed to be only 900 bytes, and my varchar(2048) field blows that away.
I dunno how well it would perform, but I think you could write a trigger to enforce this, even if you couldn't do it directly with an index. Something like:
-- given a table stories(story_id int not null primary key, story varchar(max) not null)
CREATE TRIGGER prevent_plagiarism
ON stories
after INSERT, UPDATE
AS
DECLARE #cnt AS INT
SELECT #cnt = Count(*)
FROM stories
INNER JOIN inserted
ON ( stories.story = inserted.story
AND stories.story_id != inserted.story_id )
IF #cnt > 0
BEGIN
RAISERROR('plagiarism detected',16,1)
ROLLBACK TRANSACTION
END
Also, varchar(2048) sounds fishy to me (some things in life are 2048 bytes, but it's pretty uncommon); should it really not be varchar(max)?
DELETE
FROM
table_name T1
WHERE
rowid > (
SELECT
min(rowid)
FROM
table_name T2
WHERE
T1.column_name = T2.column_name
);
CREATE TABLE car(Id int identity(1,1), PersonId int, CarId int)
INSERT INTO car(PersonId,CarId)
VALUES(1,2),(1,3),(1,2),(2,4)
--SELECT * FROM car
;WITH CTE as(
SELECT ROW_NUMBER() over (PARTITION BY personid,carid order by personid,carid) as rn,Id,PersonID,CarId from car)
DELETE FROM car where Id in(SELECT Id FROM CTE WHERE rn>1)
I you want to preview the rows you are about to remove and keep control over which of the duplicate rows to keep. See http://developer.azurewebsites.net/2014/09/better-sql-group-by-find-duplicate-data/
with MYCTE as (
SELECT ROW_NUMBER() OVER (
PARTITION BY DuplicateKey1
,DuplicateKey2 -- optional
ORDER BY CreatedAt -- the first row among duplicates will be kept, other rows will be removed
) RN
FROM MyTable
)
DELETE FROM MYCTE
WHERE RN > 1