I am trying to copy Access (2013) database tables to SQL Server 2014. Access Database Engine Reports conflict between 64 bit SQL and 32 bit Access. Table > Tasks > Import gives attached Report. There are no relationships and No Indexes.
Can any one help ??
Operation stopped...
Initializing Data Flow Task (Success)
Initializing Connections (Success)
Setting SQL Command (Success)
Setting Source Connection (Success)
Setting Destination Connection (Success)
Validating (Success)
Messages
Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
(SQL Server Import and Export Wizard)
Prepare for Execute (Success)
Pre-execute (Success)
Executing (Success)
Copying to Actions (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E2F.
An OLE DB record is available. Source: "Microsoft Office Access Database Engine" Hresult: 0x80040E2F Description: "The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Actions.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination - Actions.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Actions" (121) failed with error code 0xC0209029 while processing input "Destination Input" (134). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Post-execute (Success)
Messages
Information 0x4004300b: Data Flow Task 1: "Destination - Actions" wrote 0 rows.
(SQL Server Import and Export Wizard)
It is too clear that there are duplicated rows or null value in MS access.
For the second error, you may need to visit this link or information
https://connect.microsoft.com/SQLServer/feedback/details/573638/ssis-package-failes-with-ole-db-error-when-using-transaction-support-on-sequence-container
The third one results from you may fail the whole package transformation when you encounter an error
Related
I'm trying to import data from MS Access to SQL Server, this process used to work, today I'm not able to import the data. When I try to import the data with the SQL Server Import and export wizard shows me the next errors:
- Copying to [dbo].[Measurements] (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database 'MITSF_2' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Measurements.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination - Measurements.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Measurements" (778) failed with error code 0xC0209029 while processing input "Destination Input" (791). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Measurements returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
I tried shrinking the database and truncate the log file, but stills give me the same error.
Seems pretty clear you're out of disk space:
Description: "Could not allocate a new page for database 'MITSF_2' because of insufficient disk space in filegroup 'PRIMARY'.
One way this sometimes happens is if you're in FULL recovery mode and not backing up your transaction logs.
I have a Notes table, which is failing to import all the records, giving me these errors:
Copying to [dbo].[Notes] (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "Invalid character value for cast specification.".
(SQL Server Import and Export Wizard)
Error 0xc020901c: Data Flow Task 1: There was an error with Destination - Notes.Inputs[Destination Input].Columns[Action_DateTime] on Destination - Notes.Inputs[Destination Input]. The column status returned was: "Conversion failed because the data value overflowed the specified type.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Notes.Inputs[Destination Input]" failed because error code 0xC020907A occurred, and the error row disposition on "Destination - Notes.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Notes" (34) failed with error code 0xC0209029 while processing input "Destination Input" (47). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Notes returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
I'm expert with MS Access but new to SQL Server and don't understand what it is telling me.
Please help!
As Nick pointed out, some data in the Action_DateTime field was invalid for conversion. Once the data was cleaned up, it imported without issue. Does make one wonder why that data wasn't invalid for Access.
Many thanks
My experience with SQL is limited and was hoping someone could give me some advice.
Needing some suggestions on how to combat the below errors in order to have a successful transfer of an Access database file onto SQL 2014 Express server.
I have been utilising the SQL Server Import and Export Wizard to complete this which has returned several errors. A copy of the errors are shown below.
Any advice would be greatly appreciated.
•Copying to [dbo].[Tbl_*****] (Error)
Messages
◦Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB
record is available. Source: "Microsoft OLE DB Provider for SQL
Server" Hresult: 0x80004005 Description: "Invalid character value for
cast specification.". (SQL Server Import and Export Wizard)
◦Error 0xc020901c: Data Flow Task 1: There was an error with
Destination - Tbl_.Inputs[Destination Input].Columns[] on Destination
- Tbl_**.Inputs[Destination Input]. The column status returned was: "Conversion failed because the data value overflowed the specified
type.". (SQL Server Import and Export Wizard)
◦Error 0xc0209029: Data Flow Task 1: SSIS Error Code
DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination -
Tbl_.Inputs[Destination Input]" failed because error code 0xC020907A
occurred, and the error row disposition on "Destination -
Tbl_.Inputs[Destination Input]" specifies failure on error. An error
occurred on the specified object of the specified component. There may
be error messages posted before this with more information about the
failure. (SQL Server Import and Export Wizard)
◦Error 0xc0047022: Data Flow Task 1: SSIS Error Code
DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component
"Destination - Tbl_*****" (115) failed with error code 0xC0209029
while processing input "Destination Input" (128). The identified
component returned an error from the ProcessInput method. The error is
specific to the component, but the error is fatal and will cause the
Data Flow task to stop running. There may be error messages posted
before this with more information about the failure.
(SQL Server Import and Export Wizard)
◦Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
◦Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Tbl_***** returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Using SQL Server Import and Export Wizard.
I am trying to Export Data from one SQL Server to another. I have around 12 tables among which 11 was successfully exported however having issue in one table, it has 2 columns as DateTime while exporting I am getting this exception :
- Copying to [dbo].[ClaimDetails] (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
(SQL Server Import and Export Wizard)
Error 0xc020901c: Data Flow Task 1: There was an error with Destination - ClaimDetails.Inputs[Destination Input].Columns[Entrydate] on Destination - ClaimDetails.Inputs[Destination Input]. The column status returned was: "Conversion failed because the data value overflowed the specified type.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - ClaimDetails.Inputs[Destination Input]" failed because error code 0xC020907A occurred, and the error row disposition on "Destination - ClaimDetails.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - ClaimDetails" (124) failed with error code 0xC0209029 while processing input "Destination Input" (137). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - ClaimDetails returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
It successfully copies around 4025 rows and i have around 21794 rows, so its a bit difficult to manual look at each row, so i tried running
SELECT
*
FROM
ClaimDetails
WHERE
ISDATE(ActualDate) = 0
On both fields but it shows no row, so please let me know what I can do.
Date fields format look like this
Thanks
You should set dateformat first. Looking at your records it should be ymd.
SET DATEFORMAT ymd;
SELECT *
FROM ClaimDetails
WHERE ISDATE(ActualDate) = 0
Sort your table by the date field (oldest to newest). If there are Null values then scroll to the first records that has data. Now make sure that the year is the correct year.
I am trying to import data from an Excel file to an SQL database with the SQL Import Export wizard. We've had 4 sheets upload correctly and we are able to query them. For some reason though, a few of our tables are giving some errors and we aren't sure how to decipher them or what the problem could be, as they are very similar to the tables that have worked.
Here are the errors:
Copying to [dbo].[Products] (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error".
(SQL Server Import and Export Wizard)
Error 0xc020901c: Data Flow Task 1: There was an error with Destination - Products.Inputs[Destination Input].Columns[ProductID] on Destination - Products.Inputs[Destination Input]. The column status returned was: "The value violated the integrity constraints for the column.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Products.Inputs[Destination Input]" failed because error code 0xC020907D occurred, and the error row disposition on "Destination - Products.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Products" (38) failed with error code 0xC0209029 while processing input "Destination Input" (51). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
What do these mean? And what could we need to do to fix them?
Thanks
we had similar issue. Since you have a column which can not be null, you need to remove empty rows.
Just select all rows after last record and remove it then save your excel sheet and try to upload again.
The error message "The value violated the integrity constraints for the column" indicates that it's trying to import data and it is violating a constraint on your ProductID column. It's likely that either there are null values for the column that are trying to go into a field that is not null-able, or adding the row would violate some foreign key constraints.