Related
I have a very strange problem with my Visual Studio 2010 SP1 installation on a 64 bit system.
When I double click a xaml file in the solution explorer, nothing happens. The Designer doesn't show. However, when I CTRL + Tab, the file appears in the "Active Files" list.
Anyone has encountered this before? Is this a know bug? I couldn't find anything on the net...
I would check that the designer isnt simply being hidden away. Try (Menu) View > Designer or Shift+F7
Right click the xaml file, select Open With.... Which is the default editor? It should be Windows Presentation Foundation Designer.
Just to finish this question:
After some weeks it started working again. Never found out why or why it stopped working...
I am using using VS2010 and if I have a form open in designer mode and run my application the designer tab will no longer show the form designer but instead an error will be displayed (and it is only fixed by restarting the IDE) saying:
"To prevent possible data loss before loading the designer, the
following errors must be resolved:"
1 Error:
"The designer could not be shown for this file because none of the
classes within it can be designed. The designer inspected the
following classes in the file: ##### --- The base class ##### could
not be loaded. Ensure the assembly has been referenced and that all
projects have been built"
I then shows the following call stack:
at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.EnsureDocument(IDesignerSerializationManager manager)
at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager manager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager serializationManager)
at System.ComponentModel.Design.Serialization.BasicDesignerLoader.BeginLoad(IDesignerLoaderHost host)
Any help is greatly appreciated this is really annoying.
Thanks,
Joel.
I get this visual studio bug too now and then, and I deeply ignore the error text, instead I do the following:
Close the Design-tab
Reopens the Design mode by double click in Solution Explorer, or by right clicking Source code tab and select View Designer
Suddenly everything works again!
If not helping, you may have to change bullet 2 into:
Close and restart Visual Studio.
Maybe this can help you out.
I usually close the visual form, rebuild the solution, right-click then select "view designer" in the form code.
Very, very annoying. I am thinking of dropping back to VS2008.
Close the form. Clean the solution. Rebuild the solution. Reopen the form. Worked for me when nothing else would.
I had this same issue and I was able to resolve this by creating new project and then compiled and run the project and then I imported all the files and ran the project again and automatically it was working again did nothing extra.
I'm able to avoid restarting VS by doing the following
Add a new user control
Drag and drop some of your custom user controls on to it (If it gives you an error, build the solution again).
Reopen your control.
In my case, I have a winforms project with several custom controls that are used by other custom controls. Whenever I open some of those custom controls, I get a the "The base class ..." error. Adding a new custom control, building the project and then adding some custom controls from my project to the new custom control allowed me to open the custom controls that were giving me the "The base class ..." error.
UPDATE: I think I found the problem. My controls were not 'added' properly to the csproj file. In the csproj file, the files for partial classes of UI controls/components need the 'DependentUpon' attribute.
E.x.:
before:
<Compile Include="Windows\Forms\DataGridView.cs">
<SubType>Component</SubType>
</Compile>
<Compile Include="Windows\Forms\DataGridView.Designer.cs" />
after:
<Compile Include="Windows\Forms\DataGridView.cs">
<SubType>Component</SubType>
</Compile>
<Compile Include="Windows\Forms\DataGridView.Designer.cs">
<DependentUpon>DataGridView.cs</DependentUpon>
</Compile>
I had a situation where a custom user control appeared to be creating the error (not sure why) so I removed references to the user control from the form and the error went away.
It seems that after installing SP1 the problem has gone away.
Thanks for your help everyone.
I had the same problem using A control With Generics
MvpUserControl<Presenter,IViewMode> : UserControl
what I do it's Remove the Reference and Add again, Clean and Rebuild the Solution I Hope this can be useful for anybody else
I had the same problem with VS2010 SP1. Finally using Windows Update I saw some updates for Visual Studio and .Net, I installed them and is not happening any more.
Old post, but for those whom may find this...
Just ran in to this error and for me it was relatively simple fix.
Found that it may have something to do with the names of your classes, and renaming the problematic class to a higher order. That is the alphabetical order it appears in the assembly (Where A is higher than Z).
MSDN Article
Good luck.
This error occur if the Form class is not a first class in the file, for example if there is some helper class at the beginning of the file.
To solve this issue, move all other classes except Form class to the bottom of the file.
Don't code in Form1.Designer.cs. Move your logic to Form1.cs (hit F7 on Form1.cs [Design] tab).
"In the project file (.vcxproj), locate the entry for the target
Framework version. For example, if your project is designed to use the
.NET Framework 4.5, locate
v4.5 in the
element of the element. "
(Microsoft)
In my case the "v4.5" didn't exist so I add it, and everything is good now.
I tried clean solution and re-build solution and worked for me.
Hope this help!
This solution works fine, please follow these steps below to solve your problem:
Check the reference if load correctly
Clean the solution and rebuild again
Clean the project and rebuild again
Clean your project and open it again
I was login as administrator in visual studio . I just close my visual studio and again open it without run as administrator and my problem is solved
I ran into this today after upgrading VS2019. I went to properties, configuration tab, and set the projects to Configuration = Debug, Platform = Any CPU. Then it worked.
I faced this issue.
To prevent possible data loss before loading the designer, the following errors must be resolved:
I found solution for this problem:
Close all open tabs, and refresh (sync active documents) the solution.
For more information, you can see this video : https://youtu.be/Q3x2HBd7BDs
My VS2010 install has WPF Browser application project template, and WPF User Control lib template, but no WPF Application template. Any suggestions would be appreciated.
For me I was missing ProjectTypeGuids in the .csproj file (a new project worked for me so just compared the project files), so if you add this to the .csproj file under PropertyGroup I then had all the WPF types available for adding:
<ProjectTypeGuids>{60dc8134-eba5-43b8-bcc9-bb4bc16c2548};{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}</ProjectTypeGuids>
This is kind of an old question, but I just hit the same issue and found the answer after the above didn't help, so....the solution for me was that I had to select a higher framework version (4.0) before the WPF Application template I was looking for became visible. If you find that you don't have the WPF or other project templates you expect available, you may want to check that you've selected the approriate framework version from the drop-down list immediately to the right of the "Recent Templates" label in the Add New Project dialog (it's near the top-left of the dialog in question).
This issue is a lot older than Visual Studio 2010. It goes back to 2005 at least. Lucky you, I was missing the New Class template once.
According to a bunch of sources, this trick works:
If you are missing a template that comes with your installation, run devenv.exe with the /installvstemplates switch.
You'll need to exit out of all Visual Studio instances for this to work.
The trick is mentioned in the MSDN documentation:
http://msdn.microsoft.com/en-us/library/0fyc0azh.aspx
Thread on the issue in a previous version of Visual Studio: http://social.msdn.microsoft.com/forums/en-US/vssetup/thread/8a5ae9e3-be7b-493d-831c-1e49e8103f26/
I wound up uninstalling and reinstalling my Visual Studio entirely but this trick probably would have fixed my problem.
Just had this in VS2017 Community Edition. This discreet message to add missing templates helped me:
In VS 2017
Make sure that you have .Net Desktop Tools checked in you VS
https://developercommunity.visualstudio.com/content/problem/44429/missing-wpf.html
For .NET 5 (or newer) is needed to have in .csproj in xml path Project/PropertyGroup:
<UseWPF>true</UseWPF>
I'm working on a solution that contains multiple projects targeting Windows Mobile 5 and standard Windows applications.
Lately when opening up a form in designer the common UI controls (textbox, button, label, etc etc...) have vanished leaving only the controls defined within the project.
Resetting the toolbox has no effect. A google search suggested deleting the toolbox temp files in the Local Settings\Application Data\Microsoft\VisualStudio\9.0, however this was only successful in bringing back the default controls for Windows Mobile 5. The WinForms controls are still mysteriously missing.
Also, if I right-click and Select All on the toolbox, all of the WinForms controls do in fact come up, however they're all grayed out.
Has anyone else experienced this?
I just had a similiar problem. In a managed C++ project all the default toolbox items disappeared form the winforms designer. After playing around for a while I found that there was a problem in the .vcproj file.
<VisualStudioProject
ProjectType="Visual C++"
Version="9,00"
Name="COLLADA Import"
ProjectGUID="{0DEEF9B6-1929-44E3-92EC-13712839FB63}"
RootNamespace="COLLADAImport"
Keyword="ManagedCProj"
TargetFrameworkVersion="0"
>
When you set TargetFrameworkVersion to a valid number, for example 131072 for .Net 2.0, the toolbox items will be back.
If you right click on the Toolbox and select 'Choose Items...' and then sort by the 'Namespace' column, you can then select the ones you need (for example System.Windows.Forms for WinForms).
You can multiselect with Shift and then select/deselect the group.
The controls then reappear in the Toolbox as enabled.
I've noticed this exact same thing for regular WinForms as well. I can't speak to mobile applications but in regular winforms this has a tendency to happen.
I believe it's actually a bug in Visual Studio.
There are some things you can do (again, for WinForms. I'm not sure about mobile) with adding attributes to your control. Such as:
[ToolboxBitmap(typeof(MyControl), "MyControlBitmap")]
There are some other useful related things on this site:
http://en.csharp-online.net/Design-Time_Integration-Attributes
I had exactly the same problem (after installing Windows Mobile SDK all items in the toolbox were greyed out).
I've startet the Visual Studio 2008 command line as administrator and started the following command (WARNING - all your settings are lost !!)
devenv /setup /resetuserdata /selfreg /resetskippkgs
After that the toolbox looked fine and worked like on the first day.
The idea came from this thread: connect.microsoft.com
Go to the Tools menu and choose import & export settings, then choose the 'reset all' setting, then yes. Save your current settings, after that you'll have your toolbox reappear.
Actually you may be able to add a registry key to get this to work also.
Make sure you're not in Debug mode.
If you are running Visual Studio 2008 under vista, try running it as an Administrator. Right click on the shortcut and select Run as Administrator.
Well guess what install Service pack 1 for VS 2008 and it would go away and if you have wireless mouse and keyboard turn it off. Choose one of these two both work.
Can anyone explain to me how to get the visual state manager to work with a WPF application? It's just been added to the new wpftoolkit. I installed it as told, but even the sample doesn't show the VSM. In silverlight it work, but not in WPF. If installed the latest Blend 2 and updated with the SP1.
rudigrobler, you've got me thinking... There should be a registry key... So I've just opened Blend in Reflector and started searching...
I've found the location:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Expression\Blend
And added the key a DWORD with the name EnableVSM and gave it the value 1
Now it works!
Easiest way to enable is to create a new .Reg file and add the following:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Expression\Blend]
"EnableVSM"=dword:00000001
Now run it and you're done.
This might also help: http://blogs.msdn.com/expression/archive/2008/10/30/blend-2-sp1-wpf-toolkit-visual-state-manager-for-wpf.aspx
Read these 2 articles on VSM in WPF:
http://dotnet.org.za/rudi/archive/2008/10/29/silverlight-love-for-wpf.aspx
http://windowsclient.net/wpf/wpf35/wpf-35sp1-toolkit-visual-state-manager-overview.aspx
Their is a registry setting that needs to be "turned on" for VSM in WPF support for blend... Read more here