I have a SQL query (normal one). I have to run this query 4 times continuously (like a For Loop in programming). How can I have something like an array and repeat the query execution?
SQL Server
Update :
I am updating some data based on a column TargetLocation. This target location has values from 1 to 5. For each value I need to update the records that have same target location.
If you are running the query in SQL Server Management Studio, then you can use GO N to run a query N times. For example:
insert into MyTable (MyCol) select 'NewRow'
go 4
This will insert 4 rows into MyTable with the text 'NewRow' in them.
If you really need to loop over something in another application, then I recommend using the while loop as suggested by Peter Tirrell.
Note that loops are usually unnecessary in SQL. They may indicate code that is written with procedural logic instead of set-based logic.
Something like a simple SQL WHILE loop?
declare #counter int
set #counter = 0
while #counter < 10
begin
select 'foo'
set #counter = #counter + 1
end
I think you want a join in your UPDATE, as in:
--create two sample tables that we can work on
declare #tabletoupdate table(ID int,TARGETLOCATION int);
declare #sourcetable table(ID int,SOURCELOCATION int);
--drop in sample data
insert into #tabletoupdate select 1,10 union select 2,20 union select 3, 30;
insert into #sourcetable select 1,100 union select 2,200 union select 3, 300;
--see the 'before'
select * from #tabletoupdate
select * from #sourcetable
--make target look like source
update #tabletoupdate
set
targetlocation = s.sourcelocation
from
#tabletoupdate t
inner join #sourcetable s on s.id = t.id;
--show 'after'
select * from #tabletoupdate
select * from #sourcetable
/*
--if you really insist on doing it with a loop
--bad because its
--1) slower
--2) less readable
--3) less reliable when other users are accessing the data
declare #currentID int = 0;
declare #maxID int = (select max(id) from #sourcetable);
while #currentID < #maxID
begin
set #currentID = #currentID + 1;
declare #newval int = (select sourcelocation
from #sourcetable
where id = #currentID
);
if #newval is not null
begin
update #tabletoupdate
set TARGETLOCATION = #newval
where id = #currentID;
end
end
--*/
I'm trying to create a procedure in SQL Server 2008 that inserts data from a temp table into an already existing table. I think I've pretty much figured it out, I'm just having an issue with a loop. I need the row count from the temp table to determine when the loop should finish.
I've tried using ##ROWCOUNT in two different ways; using it by itself in the WHILE statement, and creating a variable to try and hold the value when the first loop has finished (see code below).
Neither of these methods have worked, and I'm now at a loss as to what to do. Is it possible to use ##ROWCOUNT in this situation, or is there another method that would work better?
CREATE PROCEDURE InsertData(#KeywordList varchar(max))
AS
BEGIN
--create temp table to hold words and weights
CREATE TABLE #tempKeywords(ID int NOT NULL, keyword varchar(10) NOT NULL);
DECLARE #K varchar(10), #Num int, #ID int
SET #KeywordList= LTRIM(RTRIM(#KeywordList))+ ','
SET #Num = CHARINDEX(',', #KeywordList, 1)
SET #ID = 0
--Parse varchar and split IDs by comma into temp table
IF REPLACE(#KeywordList, ',', '') <> ''
BEGIN
WHILE #Num > 0
BEGIN
SET #K= LTRIM(RTRIM(LEFT(#KeywordList, #Num - 1)))
SET #ID = #ID + 1
IF #K <> ''
BEGIN
INSERT INTO #tempKeywords VALUES (#ID, #K)
END
SET #KeywordList = RIGHT(#KeywordList, LEN(#KeywordList) - #Num)
SET #Num = CHARINDEX(',', #KeywordList, 1)
--rowcount of temp table
SET #rowcount = ##ROWCOUNT
END
END
--declaring variables for loop
DECLARE #count INT
DECLARE #t_name varchar(30)
DECLARE #key varchar(30)
DECLARE #key_weight DECIMAL(18,2)
--setting count to start from first keyword
SET #count = 2
--setting the topic name as the first row in temp table
SET #t_name = (Select keyword from #tempKeywords where ID = 1)
--loop to insert data from temp table into Keyword table
WHILE(#count < #rowcount)
BEGIN
SET #key = (SELECT keyword FROM #tempKeywords where ID = #count)
SET #key_weight = (SELECT keyword FROM #tempKeywords where ID = #count+2)
INSERT INTO Keyword(Topic_Name,Keyword,K_Weight)
VALUES(#t_name,#key,#key_weight)
SET #count= #count +2
END
--End stored procedure
END
To solve the second part of your problem:
INSERT INTO Keyword(Topic_Name,Keyword,K_Weight)
SELECT tk1.keyword, tk2.keyword, tk3.keyword
FROM
#tempKeywords tk1
cross join
#tempKeywords tk2
inner join
#tempKeywords tk3
on
tk2.ID = tk3.ID - 1
WHERE
tk1.ID = 1 AND
tk2.ID % 2 = 0
(This code should replace everything in your current script from the --declaring variables for loop comment onwards)
You could change:
WHILE(#count < #rowcount)
to
WHILE(#count < (select count(*) from #tempKeywords))
But like marc_s commented, you should be able to do this without a while loop.
I'd look at reworking your query to see if you can do this in a set based way rather than row by row.
I'm not sure I follow exactly what you are trying to achieve, but I'd be tempted to look at the ROW_NUMBER() function to set the ID of your temp table. Used with a recursive CTE such as shown in this answer you could get an id for each of your non empty trimmed words. An example is something like;
DECLARE #KeywordList varchar(max) = 'TEST,WORD, ,,,LIST, SOME , WITH, SPACES'
CREATE TABLE #tempKeywords(ID int NOT NULL, keyword varchar(10) NOT NULL)
;WITH kws (ord, DataItem, Data) AS(
SELECT CAST(1 AS INT), LEFT(#KeywordList, CHARINDEX(',',#KeywordList+',')-1) ,
STUFF(#KeywordList, 1, CHARINDEX(',',#KeywordList+','), '')
union all
select ord + 1, LEFT(Data, CHARINDEX(',',Data+',')-1),
STUFF(Data, 1, CHARINDEX(',',Data+','), '')
from kws
where Data > ''
), trimKws(ord1, trimkw) AS (
SELECT ord, RTRIM(LTRIM(DataItem))
FROM kws
)
INSERT INTO #tempKeywords (ID, keyword)
SELECT ROW_NUMBER() OVER (ORDER BY ord1) as OrderedWithoutSpaces, trimkw
FROM trimKws WHERE trimkw <> ''
SELECT * FROM #tempKeywords
I don't fully understand what you are trying to acheive with the second part of your query , but but you could just build on this to get the remainder of it working. It certainly looks as though you could do what you are after without while statements at least.
I am trying to see if its possible to perform Update within a cursor loop and this updated data gets reflected during the second iteration in the loop.
DECLARE cur CURSOR
FOR SELECT [Product], [Customer], [Date], [Event] FROM MyTable
WHERE [Event] IS NULL
OPEN cur
FETCH NEXT INTO #Product, #Customer, #Date, #Event
WHILE ##FETCH_STATUS = 0
BEGIN
SELECT * FROM MyTable WHERE [Event] = 'No Event' AND [Date] < #DATE
-- Now I update my Event value to 'No Event' for records whose date is less than #Date
UPDATE MyTable SET [Event] = 'No Event' WHERE [Product] = #Product AND [Customer] = #Customer AND [Date] < #DATE
FETCH NEXT INTO #Product, #Customer, #Date, #Event
END
CLOSE cur
DEALLOCATE cur
Assume when the sql executes the Event column is NULL for all records
In the above sql, I am doing a select inside the cursor loop to query MyTable where Event value is 'No Event' but the query returns no value even though I am doing an update in the next line.
So, I am thinking if it is even possible to update a table and the updated data get reflected in the next iteration of the cursor loop.
Thanks for any help,
Javid
Firstly You shouldn't need a cursor here. Something like the following would have the same semantics (from a starting position where all Event are NULL) and be more efficient.
WITH T
AS (SELECT [Event],
RANK() OVER (PARTITION BY [Product], [Customer]
ORDER BY [Date] DESC) AS Rnk
FROM MyTable)
UPDATE T
SET [Event] = 'No Event'
WHERE Rnk > 1
Secondly regarding the question in the title to commit inside a cursor loop is the same as anywhere else. You just need a COMMIT statement. However if you aren't running this inside a larger transaction the UPDATE statement will be auto committed anyway.
Thirdly Your real question doesn't seem to be about commit anyway. It is about the cursor reflecting updates to the data on subsequent iterations. For the case in the question you would need a DYNAMIC cursor
Defines a cursor that reflects all data changes made to the rows in
its result set as you scroll around the cursor. The data values,
order, and membership of the rows can change on each fetch.
Not all queries support dynamic cursors. The code in the question would but without an ORDER BY it is undeterministic what order the rows would be processed in and thus whether you would see visible results. I have added an ORDER BY and an index to support this to allow a dynamic cursor to be used.
If you try the following you will see the cursor only fetches one row as the dates are processed in descending order and when the first row is processed the table is updated such that no more rows qualify for the next fetch. If you comment out the UPDATE inside the cursor loop all three rows are fetched.
CREATE TABLE MyTable
(
[Product] INT,
[Customer] INT,
[Date] DATETIME,
[Event] VARCHAR(10) NULL,
PRIMARY KEY ([Date], [Product], [Customer])
)
INSERT INTO MyTable
VALUES (1,1,'20081201',NULL),
(1,1,'20081202',NULL),
(1,1,'20081203',NULL)
DECLARE #Product INT,
#Customer INT,
#Date DATETIME,
#Event VARCHAR(10)
DECLARE cur CURSOR DYNAMIC TYPE_WARNING FOR
SELECT [Product],
[Customer],
[Date],
[Event]
FROM MyTable
WHERE [Event] IS NULL
ORDER BY [Date] DESC
OPEN cur
FETCH NEXT FROM cur INTO #Product, #Customer, #Date, #Event
WHILE ##FETCH_STATUS = 0
BEGIN
SELECT #Product,
#Customer,
#Date,
#Event
-- Now I update my Event value to 'No Event' for records whose date is less than #Date
UPDATE MyTable
SET [Event] = 'No Event'
WHERE [Product] = #Product
AND [Customer] = #Customer
AND [Date] < #Date
FETCH NEXT FROM cur INTO #Product, #Customer, #Date, #Event
END
CLOSE cur
DEALLOCATE cur
DROP TABLE MyTable
Even if this worked, this would not guarantee the correct result since you miss an ORDER BY clause in your query.
Depending on this, all records, no records or any random subset of records could be updated.
Could you please explain in plain English what your stored procedure should do?
Use Below template
DECLARE #CCount int = 100
DECLARE #Count int = 0
DECLARE #id AS BigInt
DECLARE cur Cursor fast_forward for
SELECT t1.Id
FROM Table1 t1 WITH (NOLOCK) WHERE <Some where clause>
OPEN cur
Begin Tran
While (1=1)
Begin
Fetch next from cur into #id
If ##Fetch_Status <> 0
break
-- do some DML actions
Delete From Table1 WITH (ROWLOCK) where Id = #id
Set #count = #count + ##Rowcount
if (#count % #CCount = 0)
Begin
if (#count % 100 = 0)
Print 'Table1: DML action ' + Cast(#count as Varchar(15)) + ' rows'
-- for every 100 rows commit tran will trigger , and starts a new one.
While ##Trancount > 0 Commit Tran
Begin Tran
End
End
While ##Trancount > 0 Commit Tran
Close cur
Deallocate cur
Let's say I have the following simple table variable:
declare #databases table
(
DatabaseID int,
Name varchar(15),
Server varchar(15)
)
-- insert a bunch rows into #databases
Is declaring and using a cursor my only option if I wanted to iterate through the rows? Is there another way?
First of all you should be absolutely sure you need to iterate through each row — set based operations will perform faster in every case I can think of and will normally use simpler code.
Depending on your data it may be possible to loop using just SELECT statements as shown below:
Declare #Id int
While (Select Count(*) From ATable Where Processed = 0) > 0
Begin
Select Top 1 #Id = Id From ATable Where Processed = 0
--Do some processing here
Update ATable Set Processed = 1 Where Id = #Id
End
Another alternative is to use a temporary table:
Select *
Into #Temp
From ATable
Declare #Id int
While (Select Count(*) From #Temp) > 0
Begin
Select Top 1 #Id = Id From #Temp
--Do some processing here
Delete #Temp Where Id = #Id
End
The option you should choose really depends on the structure and volume of your data.
Note: If you are using SQL Server you would be better served using:
WHILE EXISTS(SELECT * FROM #Temp)
Using COUNT will have to touch every single row in the table, the EXISTS only needs to touch the first one (see Josef's answer below).
Just a quick note, if you are using SQL Server (2008 and above), the examples that have:
While (Select Count(*) From #Temp) > 0
Would be better served with
While EXISTS(SELECT * From #Temp)
The Count will have to touch every single row in the table, the EXISTS only needs to touch the first one.
This is how I do it:
declare #RowNum int, #CustId nchar(5), #Name1 nchar(25)
select #CustId=MAX(USERID) FROM UserIDs --start with the highest ID
Select #RowNum = Count(*) From UserIDs --get total number of records
WHILE #RowNum > 0 --loop until no more records
BEGIN
select #Name1 = username1 from UserIDs where USERID= #CustID --get other info from that row
print cast(#RowNum as char(12)) + ' ' + #CustId + ' ' + #Name1 --do whatever
select top 1 #CustId=USERID from UserIDs where USERID < #CustID order by USERID desc--get the next one
set #RowNum = #RowNum - 1 --decrease count
END
No Cursors, no temporary tables, no extra columns.
The USERID column must be a unique integer, as most Primary Keys are.
Define your temp table like this -
declare #databases table
(
RowID int not null identity(1,1) primary key,
DatabaseID int,
Name varchar(15),
Server varchar(15)
)
-- insert a bunch rows into #databases
Then do this -
declare #i int
select #i = min(RowID) from #databases
declare #max int
select #max = max(RowID) from #databases
while #i <= #max begin
select DatabaseID, Name, Server from #database where RowID = #i --do some stuff
set #i = #i + 1
end
Here is how I would do it:
Select Identity(int, 1,1) AS PK, DatabaseID
Into #T
From #databases
Declare #maxPK int;Select #maxPK = MAX(PK) From #T
Declare #pk int;Set #pk = 1
While #pk <= #maxPK
Begin
-- Get one record
Select DatabaseID, Name, Server
From #databases
Where DatabaseID = (Select DatabaseID From #T Where PK = #pk)
--Do some processing here
--
Select #pk = #pk + 1
End
[Edit] Because I probably skipped the word "variable" when I first time read the question, here is an updated response...
declare #databases table
(
PK int IDENTITY(1,1),
DatabaseID int,
Name varchar(15),
Server varchar(15)
)
-- insert a bunch rows into #databases
--/*
INSERT INTO #databases (DatabaseID, Name, Server) SELECT 1,'MainDB', 'MyServer'
INSERT INTO #databases (DatabaseID, Name, Server) SELECT 1,'MyDB', 'MyServer2'
--*/
Declare #maxPK int;Select #maxPK = MAX(PK) From #databases
Declare #pk int;Set #pk = 1
While #pk <= #maxPK
Begin
/* Get one record (you can read the values into some variables) */
Select DatabaseID, Name, Server
From #databases
Where PK = #pk
/* Do some processing here */
/* ... */
Select #pk = #pk + 1
End
If you have no choice than to go row by row creating a FAST_FORWARD cursor. It will be as fast as building up a while loop and much easier to maintain over the long haul.
FAST_FORWARD
Specifies a FORWARD_ONLY, READ_ONLY cursor with performance optimizations enabled. FAST_FORWARD cannot be specified if SCROLL or FOR_UPDATE is also specified.
This will work in SQL SERVER 2012 version.
declare #Rowcount int
select #Rowcount=count(*) from AddressTable;
while( #Rowcount>0)
begin
select #Rowcount=#Rowcount-1;
SELECT * FROM AddressTable order by AddressId desc OFFSET #Rowcount ROWS FETCH NEXT 1 ROWS ONLY;
end
Another approach without having to change your schema or using temp tables:
DECLARE #rowCount int = 0
,#currentRow int = 1
,#databaseID int
,#name varchar(15)
,#server varchar(15);
SELECT #rowCount = COUNT(*)
FROM #databases;
WHILE (#currentRow <= #rowCount)
BEGIN
SELECT TOP 1
#databaseID = rt.[DatabaseID]
,#name = rt.[Name]
,#server = rt.[Server]
FROM (
SELECT ROW_NUMBER() OVER (
ORDER BY t.[DatabaseID], t.[Name], t.[Server]
) AS [RowNumber]
,t.[DatabaseID]
,t.[Name]
,t.[Server]
FROM #databases t
) rt
WHERE rt.[RowNumber] = #currentRow;
EXEC [your_stored_procedure] #databaseID, #name, #server;
SET #currentRow = #currentRow + 1;
END
You can use a while loop:
While (Select Count(*) From #TempTable) > 0
Begin
Insert Into #Databases...
Delete From #TempTable Where x = x
End
Lightweight, without having to make extra tables, if you have an integer ID on the table
Declare #id int = 0, #anything nvarchar(max)
WHILE(1=1) BEGIN
Select Top 1 #anything=[Anything],#id=#id+1 FROM Table WHERE ID>#id
if(##ROWCOUNT=0) break;
--Process #anything
END
I really do not see the point why you would need to resort to using dreaded cursor.
But here is another option if you are using SQL Server version 2005/2008
Use Recursion
declare #databases table
(
DatabaseID int,
Name varchar(15),
Server varchar(15)
)
--; Insert records into #databases...
--; Recurse through #databases
;with DBs as (
select * from #databases where DatabaseID = 1
union all
select A.* from #databases A
inner join DBs B on A.DatabaseID = B.DatabaseID + 1
)
select * from DBs
-- [PO_RollBackOnReject] 'FININV10532'
alter procedure PO_RollBackOnReject
#CaseID nvarchar(100)
AS
Begin
SELECT *
INTO #tmpTable
FROM PO_InvoiceItems where CaseID = #CaseID
Declare #Id int
Declare #PO_No int
Declare #Current_Balance Money
While (Select ROW_NUMBER() OVER(ORDER BY PO_LineNo DESC) From #tmpTable) > 0
Begin
Select Top 1 #Id = PO_LineNo, #Current_Balance = Current_Balance,
#PO_No = PO_No
From #Temp
update PO_Details
Set Current_Balance = Current_Balance + #Current_Balance,
Previous_App_Amount= Previous_App_Amount + #Current_Balance,
Is_Processed = 0
Where PO_LineNumber = #Id
AND PO_No = #PO_No
update PO_InvoiceItems
Set IsVisible = 0,
Is_Processed= 0
,Is_InProgress = 0 ,
Is_Active = 0
Where PO_LineNo = #Id
AND PO_No = #PO_No
End
End
It's possible to use a cursor to do this:
create function [dbo].f_teste_loop
returns #tabela table
(
cod int,
nome varchar(10)
)
as
begin
insert into #tabela values (1, 'verde');
insert into #tabela values (2, 'amarelo');
insert into #tabela values (3, 'azul');
insert into #tabela values (4, 'branco');
return;
end
create procedure [dbo].[sp_teste_loop]
as
begin
DECLARE #cod int, #nome varchar(10);
DECLARE curLoop CURSOR STATIC LOCAL
FOR
SELECT
cod
,nome
FROM
dbo.f_teste_loop();
OPEN curLoop;
FETCH NEXT FROM curLoop
INTO #cod, #nome;
WHILE (##FETCH_STATUS = 0)
BEGIN
PRINT #nome;
FETCH NEXT FROM curLoop
INTO #cod, #nome;
END
CLOSE curLoop;
DEALLOCATE curLoop;
end
I'm going to provide the set-based solution.
insert #databases (DatabaseID, Name, Server)
select DatabaseID, Name, Server
From ... (Use whatever query you would have used in the loop or cursor)
This is far faster than any looping techique and is easier to write and maintain.
I prefer using the Offset Fetch if you have a unique ID you can sort your table by:
DECLARE #TableVariable (ID int, Name varchar(50));
DECLARE #RecordCount int;
SELECT #RecordCount = COUNT(*) FROM #TableVariable;
WHILE #RecordCount > 0
BEGIN
SELECT ID, Name FROM #TableVariable ORDER BY ID OFFSET #RecordCount - 1 FETCH NEXT 1 ROW;
SET #RecordCount = #RecordCount - 1;
END
This way I don't need to add fields to the table or use a window function.
I agree with the previous post that set-based operations will typically perform better, but if you do need to iterate over the rows here's the approach I would take:
Add a new field to your table variable (Data Type Bit, default 0)
Insert your data
Select the Top 1 Row where fUsed = 0 (Note: fUsed is the name of the field in step 1)
Perform whatever processing you need to do
Update the record in your table variable by setting fUsed = 1 for the record
Select the next unused record from the table and repeat the process
DECLARE #databases TABLE
(
DatabaseID int,
Name varchar(15),
Server varchar(15),
fUsed BIT DEFAULT 0
)
-- insert a bunch rows into #databases
DECLARE #DBID INT
SELECT TOP 1 #DBID = DatabaseID from #databases where fUsed = 0
WHILE ##ROWCOUNT <> 0 and #DBID IS NOT NULL
BEGIN
-- Perform your processing here
--Update the record to "used"
UPDATE #databases SET fUsed = 1 WHERE DatabaseID = #DBID
--Get the next record
SELECT TOP 1 #DBID = DatabaseID from #databases where fUsed = 0
END
Step1: Below select statement creates a temp table with unique row number for each record.
select eno,ename,eaddress,mobno int,row_number() over(order by eno desc) as rno into #tmp_sri from emp
Step2:Declare required variables
DECLARE #ROWNUMBER INT
DECLARE #ename varchar(100)
Step3: Take total rows count from temp table
SELECT #ROWNUMBER = COUNT(*) FROM #tmp_sri
declare #rno int
Step4: Loop temp table based on unique row number create in temp
while #rownumber>0
begin
set #rno=#rownumber
select #ename=ename from #tmp_sri where rno=#rno **// You can take columns data from here as many as you want**
set #rownumber=#rownumber-1
print #ename **// instead of printing, you can write insert, update, delete statements**
end
This approach only requires one variable and does not delete any rows from #databases. I know there are a lot of answers here, but I don't see one that uses MIN to get your next ID like this.
DECLARE #databases TABLE
(
DatabaseID int,
Name varchar(15),
Server varchar(15)
)
-- insert a bunch rows into #databases
DECLARE #CurrID INT
SELECT #CurrID = MIN(DatabaseID)
FROM #databases
WHILE #CurrID IS NOT NULL
BEGIN
-- Do stuff for #CurrID
SELECT #CurrID = MIN(DatabaseID)
FROM #databases
WHERE DatabaseID > #CurrID
END
Here's my solution, which makes use of an infinite loop, the BREAK statement, and the ##ROWCOUNT function. No cursors or temporary table are necessary, and I only need to write one query to get the next row in the #databases table:
declare #databases table
(
DatabaseID int,
[Name] varchar(15),
[Server] varchar(15)
);
-- Populate the [#databases] table with test data.
insert into #databases (DatabaseID, [Name], [Server])
select X.DatabaseID, X.[Name], X.[Server]
from (values
(1, 'Roger', 'ServerA'),
(5, 'Suzy', 'ServerB'),
(8675309, 'Jenny', 'TommyTutone')
) X (DatabaseID, [Name], [Server])
-- Create an infinite loop & ensure that a break condition is reached in the loop code.
declare #databaseId int;
while (1=1)
begin
-- Get the next database ID.
select top(1) #databaseId = DatabaseId
from #databases
where DatabaseId > isnull(#databaseId, 0);
-- If no rows were found by the preceding SQL query, you're done; exit the WHILE loop.
if (##ROWCOUNT = 0) break;
-- Otherwise, do whatever you need to do with the current [#databases] table row here.
print 'Processing #databaseId #' + cast(#databaseId as varchar(50));
end
This is the code that I am using 2008 R2. This code that I am using is to build indexes on key fields (SSNO & EMPR_NO) n all tales
if object_ID('tempdb..#a')is not NULL drop table #a
select 'IF EXISTS (SELECT name FROM sysindexes WHERE name ='+CHAR(39)+''+'IDX_'+COLUMN_NAME+'_'+SUBSTRING(table_name,5,len(table_name)-3)+char(39)+')'
+' begin DROP INDEX [IDX_'+COLUMN_NAME+'_'+SUBSTRING(table_name,5,len(table_name)-3)+'] ON '+table_schema+'.'+table_name+' END Create index IDX_'+COLUMN_NAME+'_'+SUBSTRING(table_name,5,len(table_name)-3)+ ' on '+ table_schema+'.'+table_name+' ('+COLUMN_NAME+') ' 'Field'
,ROW_NUMBER() over (order by table_NAMe) as 'ROWNMBR'
into #a
from INFORMATION_SCHEMA.COLUMNS
where (COLUMN_NAME like '%_SSNO_%' or COLUMN_NAME like'%_EMPR_NO_')
and TABLE_SCHEMA='dbo'
declare #loopcntr int
declare #ROW int
declare #String nvarchar(1000)
set #loopcntr=(select count(*) from #a)
set #ROW=1
while (#ROW <= #loopcntr)
begin
select top 1 #String=a.Field
from #A a
where a.ROWNMBR = #ROW
execute sp_executesql #String
set #ROW = #ROW + 1
end
SELECT #pk = #pk + 1
would be better:
SET #pk += #pk
Avoid using SELECT if you are not referencing tables are are just assigning values.