I am currently attempting to use FileZilla Pro CLI on a Windows machine to connect and upload to a site in that is working in the Site Manager.
The issue is, the command below works perfectly when pasting it directly into the cmd line. However when saving it as a batch file, it simply just gets to the fzcli> prompt and then nothing happens.
The two line breaks are on purposes to override the requirement for a password and it works perfectly when pasted in.
Does anyone know if this is a cmd line issue, or if my commands need to be different to work in batch file mode?
fzcli
connect --site 0testsite01
put C:/inetpub/wwwroot/websites/sftp/files/customer/test-01.txt /test-sftp/testuser01/test/test-01-uploaded.txt
PAUSE
Your batch file executes fzcli in an interactive mode. The fzcli then waits for you to interactively enter the commands. Only after you would exit the fzcli, the batch file would continue. And fail, as it will try to execute connect as a batch file command. The fzcli does not know about the batch file. Nor does the batch file interpreter know about the fzcli commands.
It's a common misconception. You will find plenty of similar questions basically about scripting any tool that has its own commands. For example: sftp, ftp, psftp, winscp.
To provide commands to fzcli, it seems that you need to use --script switch. The fzcli documentation gives this example:
fzcli --mode standalone --script C:\Scripts\script-file
Currently I have a batch file that sets all the environment variables needed before starting the build process.
It's a must to use the same bat for setting the env variables.
I tried to use EnvInject Plugin, didn't have any success.
Also tried "Execute Windows batch command" before running msbuild. e.g. start mybat.bat - this didn't seem to work either
How can I integrate the same bat file to set the variables?
Each Jenkins "build step" has it's own environment, I explained this in detail in this answer: Can not change Jenkins String Parameter Variable
If you are using the MSBuild plugin, it is its own build step, so using other build steps to change the environment is futile. If you are launching MSBuild through command line using "Execute Windows batch command", then just ran your bat file within the same build step, preceding the MSBuild command
In the case of MSBuild plugin, the only proper way is to use EnvInject plugin. Maybe you should try to figure out what isn't working for you with EnvInject plugin. From the example documentation, you want to be using "At job level" configuration, to populate your whole job with the variables from your .bat file.
I need Jenkins to be able to run batch file on slave locally with parameters. I've tried to use PSExec tool, but it does not run when Jenkins tries to do it (slave: windows 7 x86 OS). xCmd cannot be run locally. Can anybody suggest some tools or some way to do it?
PSExec works for me on Windows 7 x64. Solved.
I am trying to run this command in jenkins after a MSbuild
xcopy "C:\Program Files (x86)\Jenkins\workspace\trunk\Projects\results\results\obj\Debug\Package\PackageTmp" "Y:\Extraction_Zone\Jenkins\" /E
Y: is a mapped network drive. This runs fine in cmd.exe but when trying to run it in Jenkins, I am getting the error Invalid drive specification.
Here is the output from jenkins:
Time Elapsed 00:00:04.03
[trunk] $ cmd /c call C:\Windows\TEMP\hudson3389873107474371072.bat
C:\Program Files (x86)\Jenkins\workspace\trunk>xcopy "C:\Program Files (x86)\Jenkins\workspace\trunk\Projects\results\results\obj\Debug\Package\PackageTmp" "Y:\Extraction_Zone\Jenkins\" /E
Invalid drive specification
0 File(s) copied
C:\Program Files (x86)\Jenkins\workspace\trunk>exit 4
Build step 'Execute Windows batch command' marked build as failure
Finished: FAILURE
Any help would be appreciated.
I too had a similar issue once. Try granting the Jenkins service "Logon as This account" right under services.msc and make sure the account you type there is the same as the one you use for running cmd.exe.
These commands based on Java JAR files worked for me:
cmd
net use x: \\
xcopy "dist\" x:\ /Y
And that's it! I spent lot of time figure out this issue and nothing worked until I wrote CMD and NET USE!
Neither I didn't need to change permission on jenkins service nor use runas command.
But I must mention that everyone had read and write access to the network drive.
I had the same issue with my Windows Task running a batch file (I know it is not exactly same) where I tried to copy file to network location i.e. shared drive. I used the UNC path and mapped drive as well but the error was same. For me it was error number 4 - MS DOS error code.
The solution was to use net use command! Hope that it helps.
Easy fix for most things.
Make a batch command with what your trying to run, filename.bat with the command prompt text inside.
Make a normal windows shortcut for the batch command, edit the shortcuts advanced properties and check the "Run as admin" (tricky tricky).
Now run the filename.lnk shortcut from jenkins command line call, this will get you around all the jazz.
:)
The solution of adarshr (i.e., modifying the log on credentials of the service) has worked for me for a part of the problem: in my case, this allowed me to successfully check out a mercurial repository (using ssh protocol), which I could not do when using 'Local System account'.
However, I still have different behavior between running a command-line script or running the same script from a jenkins 'execute shell' script in the build section. In my case, I compile a Python extension. In Jenkins, I cannot import the extension (I don't see any error, but the execution simply stops, so I suspect it crashes).
If I uninstall the service and run the slave agent as a Java Web Start, I do get the same behavoir. It is a temporary fix for me, but it means that when I reboot the windows build machine, I have to manually re-start the Java Web Start application.
So -at least in my case- it is clear that this is a credential problem.
Credentials usage documentation: https://wiki.jenkins-ci.org/display/JENKINS/Jenkins+CLI
I've solved my issue with the CIFS plugin.
Faced similar issue and found two ways to solve.
Type 1:
Tell Jenkins about mapped drive.
1.Goto -> Manage Jenkins -> Script Console (Groovy Script).
2.Run below command
def mapdrive = "net use Y: \\\\copy_nework_address"
mapdrive.execute();
println "net use".execute().getText()
Type:2
1.Goto -> cmd -> run "net use" to know network address
xcopy "C:\Program Files (x86)\Jenkins\workspace\trunk\Projects\results\results\obj\Debug\Package\PackageTmp" "Copy_Network_Address\Extraction_Zone\Jenkins\" /E
Conclusion:- I prefer 2nd types as after every restart i should run Groovy Script.
In hudson, after running a .bat script my slave refuses to run anything that comes afterward. It instead just said that it finished with a success.
Trying do a
call yourscript.bat
instead of just a
yourscript.bat