CREATE OR ALTER FUNCTION sso.FINDSEQVALUE
(#sequence_text text)
RETURNS int
AS
BEGIN
DECLARE #value int;
DECLARE #sequence_value nvarchar(150);
SELECT #sequence_value = CAST(#sequence_text AS nvarchar(150));
SELECT #value = NEXT VALUE FOR #sequence_value;
RETURN #value;
END;
I have a problem. I have created a function on SQL Server and I defined the parameter as you can see. But I cannot add the this command #sequence_value after NEXT VALUE FOR command and I am getting an error.
Incorrect syntax near '#sequence_value'
Somebody can say that "You can use (SELECT NEXT VALUE FOR [SEQUENCE])". But I need this function because of there are two different database on my project. I need same function for databases. In addition function parameter need to be text.
What should I do?
I would like to take the code below and create a common function to pass in one or more expressions and to return back an error of my choosing.
Example Code:
IF #Variable1 IS NULL AND #Variable IS NULL or #Variable3 is not null
BEGIN
-- EITHER DATASET NAME OR ID MUST BE SUPPLIED.
SET #_msg = 'There was an error'
SET #_returnValue = -1
GOTO ERROR_HANDLER
END
ERROR_HANDLER:
-- CREATE THE CLOSING MESSAGE.
IF #_returnValue <> 0
RAISERROR(#_msg, 18, 2) WITH SETERROR
RETURN #_returnValue
From the above, it would be nice to say something like this below where I could reuse the proc/function and make the code less clutered.
exec ValidateMultipleConditions #Variable1 + 'IS NULL AND ' + #Variable + 'IS NULL or ' + #Variable3 + ' is not null'
Anyway, I think with dynamic SQL being passed in this way I could do something where an complete expression could be sent evaluated, validated and then the code continues or stops with an error.
I wanted to see if the community had better ways of doing this or if I'm on the right path.
Thanks.
I'm not quite sure if I get your question right. But you can easily create an procedure (if it's needed).
CREATE PROCEDURE dbo.errorout #message nvarchar(100), #sev int, #state int
AS
BEGIN
RAISERROR(#message,#sev,#state) WITH NOWAIT
END
But I won't use this at all. I would call RAISERROR() in the place where it occurs, as it will give you more accurate line numbers and procedures in the errorlog.
I have a stored procedure that works fine but it has inside it three "select"s.
The selects are not from an inner temporary table.
This is mainly the format of the procedure:
ALTER PROCEDURE [dbo].[STProce]
#param1 int,
#param2 int,
#param3 int,
#param4 int,
#param5 int
AS
select #param1 as p1, #param2 as p2, #param3 as p3
.
.
.
select #param4 as p4
.
.
.
select #param5 as p5
I'm executing the procedure from another procedure and need to catch it there.
I created a table and inserts into it the "exec" from the procedure, like that:
CREATE TABLE #stalledp
(
RowNumber INT,
fldid INT,
fldLastUpdated datetime,
fldCreationDate datetime,
fldName nvarchar(255),
fldPending nvarchar(255)
)
INSERT INTO #stalledp (RowNumber,fldid,fldLastUpdated,fldCreationDate,fldName,fldPending)
EXEC spDebuggerViews_GetStuckWorkflowInstances #workflowSpaceId='00000000-0000-0000-0000-000000000000',#pageNum=1,#pageSize=100000,#orderByColumn=N'fldid',#sortOrder=1,#workflowInstanceId=0,#stuckInstanceType=1,#createdDateFrom='1900-01-01 00:00:00',#createdDateTo='9999-01-01 23:59:59',#updatedDateFrom='1900-01-01 00:00:00',#updatedDateTo='9999-01-01 23:59:59'
Afterwards I receive this error:
Column name or number of supplied values does not match table definition.
The order and name of columns of the table is exactly like the procedure returns.
Is there a possibility to catch only one of the tables that the procedure returns and avoid the other? I cannot change the procedure at all.
I tried declaring a table the same fields as the first select of the procedure and I get an error says that
Thank you in advance!
If all of the result sets returned are of the same structure, then you can dump them to a temp table as you are trying to do. However, that only gets you so far because if the data in the fields cannot be used to determine which result set a particular row came from, then you just have all of the result sets with no way to filter out the ones you don't want.
The only way to interact with multiple result sets individually, regardless of them having the same or differing structures, is through app code (i.e. a client connection). And if you want to do this within the context of another query, then you need to use SQLCLR.
The C# code below shows a SQLCLR stored procedure that will execute a T-SQL stored procedure that returns 4 result sets. It skips the first 2 result sets and only returns the 3rd result set. This allows the SQLCLR stored procedure to be used in an INSERT...EXEC as desired.
The code for the T-SQL stored proc that is called by the following code is shown below the C# code block. The T-SQL test proc executes sp_who2 and only return a subset of the fields being returned by that proc, showing that you don't need to return the exact same result set that you are reading; it can be manipulated in transit.
C# SQLCLR proc:
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
public class TheProc
{
[Microsoft.SqlServer.Server.SqlProcedure]
public static void Get3rdResultSetFromGetStuckWorkflowInstances()
{
int _ResultSetsToSkip = 2; // we want the 3rd result set
SqlConnection _Connection = null;
SqlCommand _Command = null;
SqlDataReader _Reader = null;
try
{
_Connection = new SqlConnection("Context Connection = true;");
_Command = _Connection.CreateCommand();
_Command.CommandType = CommandType.StoredProcedure;
_Command.CommandText = "tempdb.dbo.MultiResultSetTest";
// (optional) add parameters (but don't use AddWithValue!)
// The SqlDataRecord will be used to define the result set structure
// and act as a container for each row to be returned
SqlDataRecord _ResultSet = new SqlDataRecord(
new SqlMetaData[]
{
new SqlMetaData("SPID", SqlDbType.Char, 5),
new SqlMetaData("Status", SqlDbType.NVarChar, 30),
new SqlMetaData("Login", SqlDbType.NVarChar, 128),
new SqlMetaData("HostName", SqlDbType.NVarChar, 128),
new SqlMetaData("BlkBy", SqlDbType.VarChar, 5),
new SqlMetaData("DBName", SqlDbType.NVarChar, 128)
});
SqlContext.Pipe.SendResultsStart(_ResultSet); // initialize result set
_Connection.Open();
_Reader = _Command.ExecuteReader();
// Skip a predefined number of result sets
for (int _Index = 0;
_Index < _ResultSetsToSkip && _Reader.NextResult();
_Index++) ;
// Container used to move 1 full row from the result set being read
// to the one being sent, sized to the number of fields being read
Object[] _TempRow = new Object[_Reader.FieldCount];
while (_Reader.Read())
{
_Reader.GetValues(_TempRow); // read all columns
_ResultSet.SetValues(_TempRow); // set all columns
SqlContext.Pipe.SendResultsRow(_ResultSet); // send row
}
}
catch
{
throw;
}
finally
{
if(SqlContext.Pipe.IsSendingResults)
{
SqlContext.Pipe.SendResultsEnd(); // close out result set being sent
}
if(_Reader != null && !_Reader.IsClosed)
{
_Reader.Dispose();
}
_Command.Dispose();
if (_Connection != null && _Connection.State != ConnectionState.Closed)
{
_Connection.Dispose();
}
}
return;
}
}
T-SQL test proc:
USE [tempdb]
SET ANSI_NULLS ON;
IF (OBJECT_ID('dbo.MultiResultSetTest') IS NOT NULL)
BEGIN
DROP PROCEDURE dbo.MultiResultSetTest;
END;
GO
CREATE PROCEDURE dbo.MultiResultSetTest
AS
SET NOCOUNT ON;
SELECT 1 AS [ResultSet], 'asa' AS [test];
SELECT 2 AS [ResultSet], NEWID() AS [SomeGUID], GETDATE() AS [RightNow];
EXEC sp_who2;
SELECT 4 AS [ResultSet], CONVERT(MONEY, 131.12) AS [CashYo];
GO
EXEC tempdb.dbo.MultiResultSetTest;
To do:
Adjust _ResultSetsToSkip as appropriate. If you only want the first result set, simply remove both _ResultSetsToSkip and the for loop.
Define _ResultSet as appropriate
Set _Command.CommandText to be "spDebuggerViews_GetStuckWorkflowInstances"
Create the necessary parameters via SqlParameter (i.e. #workflowSpaceId='00000000-0000-0000-0000-000000000000',#pageNum=1,#pageSize=100000,#orderByColumn=N'fldid',#sortOrder=1,#workflowInstanceId=0,#stuckInstanceType=1,#createdDateFrom='1900-01-01 00:00:00',#createdDateTo='9999-01-01 23:59:59',#updatedDateFrom='1900-01-01 00:00:00',#updatedDateTo='9999-01-01 23:59:59')
If needed, add input parameters to the SQLCLR proc so that they can be used to set the values of certain SqlParameters
Then use as follows:
INSERT INTO #stalledp
(RowNumber,fldid,fldLastUpdated,fldCreationDate,fldName,fldPending)
EXEC Get3rdResultSetFromGetStuckWorkflowInstances;
There is a way to get the first record set but the others, I'm afraid, you're out of luck.
EXEC sp_addlinkedserver #server = 'LOCALSERVER', #srvproduct = '',
#provider = 'SQLOLEDB', #datasrc = ##servername
SELECT * FROM OPENQUERY(LOCALSERVER, 'EXEC testproc2')
EDIT: If you only need to check the other result set for columns to be not null you could predefine the expected results sets like so:
EXEC testproc2 WITH RESULT SETS (
(a VARCHAR(MAX) NOT NULL, b VARCHAR(MAX) NOT NULL),
(a VARCHAR(MAX) NOT NULL)
);
If the query within the stored procedure returns null values a exception is raised at that point in procedure. This will only work on sql server 2012 and upwards though.
I'm using PostgreSQL 9.1.3 and the following functions:
CREATE OR REPLACE FUNCTION cad(INOUT args text[], OUT retval int4) AS $cad$
BEGIN
retval := 0;
RAISE NOTICE 'cad: %', args;
END;
$cad$ LANGUAGE plpgsql;
CREATE OR REPLACE FUNCTION dodo(in_args text[]) RETURNS text[] AS $dodo$
DECLARE
_res text[];
_rv int4;
BEGIN
_res := in_args;
EXECUTE 'SELECT cad($1)' USING _res INTO _res, _rv;
RETURN _res;
END;
$dodo$ LANGUAGE plpgsql;
When I call cad directly, I get expected output:
psql$ select cad(ARRAY['Quiz']);
NOTICE: cad: {Quiz}
-[ RECORD 1 ]---
cad | ({Quiz},0)
Time: 0,319 ms
My expected result for the dodo(ARRAY['Quiz']) call is the input array without changes. But instead I receive the following error:
psql$ select dodo(ARRAY['Quiz']);
NOTICE: cad: {Quiz}CONTEXT: SQL statement "SELECT cad($1)"
PL/pgSQL function "dodo" line 8 at EXECUTE statement
ERROR: array value must start with "{" or dimension information
CONTEXT: PL/pgSQL function "dodo" line 8 at EXECUTE statement
What is wrong here?
P.S.: I have to use EXECUTE as function to call will vary, code simplified for the purpose of question.
You want something like:
EXECUTE 'SELECT * FROM cad($1)' USING _res INTO _res, _rv;
The return type isn't two columns of text[],int it's a record of (text[],int) which needs unwrapping.
Please any one tell me how to discards the scalar value in stored procedure?
this is my SP
CREATE PROCEDURE testdata
AS
BEGIN
SET NOCOUNT ON;
SELECT c.CustomerName,c.CustomerCode, a.Address, a.Email,a.phone,a.ZipCode
from Customer c
join Address a on c.CustomerCode = a.CustomerCode
END
GO
This is my C# code
CustomerDataEntities enty = new CustomerDataEntities();
var productEntity = enty.testdata123();
// error foreach statement cannot operate on variables of type int
foreach (var prd in productEntity)
{
}
return CustomerList;
Thanks.
Based just on what you're showing here, I'm assuming your stored procedure is set up as an imported function. I would guess that you are not mapping the results of this function to an entity type.