I use symmetricds 3.8.0 to sync data between Oracle 12.1 and Mysql 5.5. Oracle is the Master Server. I use the demo properties to configure with modifying its db connection information.But when I execute command : bin/sym, there show the message below:
This node is configured as a registration server, but it is missing its node_identity. It probably needs configured
It only occur when the master server is Oracle, nothing with Mysql and Mssql, I try it many times but it still show this issue, Do someone meet this problem and help me?
sym_node_identity table has to be populated with one row describing the identity of the root DB on oracle
Related
I have created a linked server using SQL authentication and the connection seems to work as I can select from the master database.
However, I cannot select from a specific database to which the SQL account I use in the linked server has access.
I tried following the suggestions in other similar posts in here but to no avail. Any help really appreciated. I am attaching a screenshot of the security settings.
Thanks.
This is a bit of a long shot, but since no one else is answering so we'll give it a go. If you restored the DB from another server, it's possible the ssid's are out of whack. Switch context to the DB on the linked server and run the following.
EXEC sys.sp_change_users_login #Action = 'Report'
If any results show up with the login in question, remove it by running this.
EXECÂ sp_change_users_login #Action='update_one', #UserNamePattern='your_user',#LoginName='your_login';
(I am a sql noob and I just can not figure this out on my own)
For some time now I have been trying to establish a connection to a SQL database in codename one but to no avail. First I tried connecting to a MariaDB database from one.com. All that's needed for the connection is
Database db = Display.getInstance().openOrCreate("databaseName");
if I am not mistaken, but I am guessing this implies that I have somehow already established a connection to the database. This is not the case however so it creates a new .sql file, right? I can recall that you can connect to a database in the services tab in Netbeans. I chose the MySQL(Connector/ J Driver) which should work with MariaDB, or should it? I entered all my data and i says that it can not establish connection to the database.
the error i get
So I thought I might as well try using localhost. I used XAMPP to host a database and connected in the netbeans services tab.
connected?
Now testing was needed to see if this works. I started the SQL journey with this https://www.codenameone.com/manual/files-storage-networking.html#_sql and integrated the part after "You can probably integrate this code into your app as a debugging tool". I changed database name to "mybase" (it's existance can be confirmed in picture 2). Ran the app, opened the dialog, entered "select ID from customers" and got: java.sql.SQLException: [SQLITE_ERROR] SQL error or missing database (no such table: customers) It does not get past the first call to "executeQuery". The customers table definitely exists so what am I missing to establish connection?
I really need instructions to connect to the localhost database and ideally also to the one hosted by my webhost provider.
Thanks,
Jona
The Database class is to access the SQLite DB on the mobile device. To connect to external databases, you'd have to do something different, such as a ConnectionRequest or Socket I think.
I am working on an ios project that has a Sybase (ultralite) database that is synchronized with a Sybase Sql Anywhere 12 database using mobilink.
Everything was properly, until i decided today to add some fields to the main database so that they synchronize to the main database.
I have updated the schema of the consolidated database from the main engine, then i have updated the schema of the remote database from the consolidated engine, and then i mapped the added fields together, and I deployed a new ultralite database.
Please note that it's not the first time I do a similar task, i always add fields, and sync databases..
after the update, when i synchronize using the blank ultralite database, mobilink will fail giving only this error: Synchronization Failed: -1305 (MOBILINK_COMMUNICATIONS_ERROR) %1:201 %2: %3:0
I have researched Error Number 201 in sybase and it points to: SQLE_NOT_PUBLIC_ID
and in the sybase documentation the error's probably cause is:
"The option specified in the SET OPTION statement is PUBLIC only. You cannot define this option for any other user."
I have tried to redeploy, I have tried to move the engine to a windows pc, all give the same error.. and i have no clue where this SET OPTION statement came from and how can i solve it..
Any hints are appreciated!
The problem was just caused by small network timeout value while setting up mobilink parameters.
info.stream_parms = (char*) #"host=192.168.0.100;port=3309;timeout=1"
i just changed the value from timeout=1 to timeout=300 and it worked!
I have a big deal: I have to connect (I just want to read data, not to write) to my customer's IBM AS/400 (aka iSeries, now IBM i) server...
I think I have all parameters needed (given me by the AS/400 programmer), but I can't figure out which driver I have to use, and if I have all software needed to to this!
I've installed IBM AS/400 ClientAccess 5.8 driver (with a patch for latest OS), and now I'm trying to configure a new Linked Server in my Sql Server 2008 R2 (x64) server.
First problem: Which driver should I use?
I have so many choices (but maybe none of these works!!):
IBM DB2 UDB for iSeries IBMDASQL OLE DB Provider
IBM DB2 UDB for iSeries IBMDA400 OLE DB Provider
IBM DB2 UDB for iSeries IBMDARLA OLE DB Provider
...or maybe other generic OLEDB/ODBC drivers?!
Second problem: Where should I put my parameters (in which fields I mean!)
In any case, in I choose a provider for my Linked Server, obviously I have to set my parameters...but I only have this:
Username of an ADMIN user
Password of the ADMIN user
AS/400 server IP address
The name of "main" archive, in which my data are stored (something like ACG_DATV2)
Third problem: How should I write my queries? How to reference an AS/400 "archive" and tables?
I don't know how to build my reading query: where are tables and views (?!) stored and how can I reference them?
Thank you in advance!
I think there are many ways to achieve what you want, but I'll try to explain what I would do in your case.
With that version of IBM ClientAccess (and also the patch), I should not have troubles in getting connected with a Sql Server 2008 R2 Linked Server if you use the correct data provider.
First of all, try to configure your linked server in this way:
Linked server name: what you want, it's just a custom name (example: MYAS400)
Provider: IBM DB2 UDB for iSeries IBMDASQL OLE DB Provider
Product name: not important, something like iSeries Access OLEDB Driver
Data source: AS/400 server IP address (example: 192.168.0.1)
Either if you configure the Linked Server using the wizard or by SQL code, the first time it will need to access the data of the AS/400 server, you'll be asked for credentials, with a typical iSeries window (look at my example).
Set your username (User ID) and the relative password, without regarding the case of the strings!!
As a general tip (but this is only related to my experience!), try to avoid special characters and upper/lower cases distinctions...
If you arrive here (no problems in the Linked Server creation), the Linked Server should work (so the first and the second problem are solved): let's build the first query!
Once the Linked Server is created, all you need is just to correctly reference the archive, the library and, of course, the correct table and the Linked Server (by name): with this informations, build a query like this (it's the usual T-SQL syntax):
SELECT
(Field1)
, (Field2)
, *
FROM (Linked Server Name).(Catalog Name).(Library).(TableName)
The only information you're probably missing is the "archive": you can easily find it browsing the Catalogs tree inside your new Linked Server, or just use iSeries Access Navigator tool!
So, in your case, I think the query should be (more or less):
SELECT
FILIO
, DTVLD
, DTVLA
, SEQZA
, CFIMP
, PADRE
, TPVLD
, CMVLD
, *
FROM MYAS400.S242DA0A.ACG_DATV2.ANLE200F
Note that S242DA0A is valid only in my case...
Remember also that:
AS/400 will probably ask you for credentials very often: also if you close and reopen SSMS.
Performance?...better to talk of something else :) ... extract the tables in your Sql Server tables and query them from there! Do it with a simple: SELECT (Fields) INTO myTable FROM (AS/400 table)
I've tried this process many times, I didn't have many troubles (once I get skilled about!)...but only for reading data (as you asked)! Never tried to update data!!!
GOOD LUCK!
I am a SQL Server developer, with a task in Oracle. DBA set up a DBLink in Oracle that points at a SQL Server database. I am writing a view on the SQL Server data and then a view on the Oracle side to join it with additional Oracle data.
Problem: if I change the definition of the view on SQL Server, even "Select * From myview#dblink" errors with "Invalid column." Closing TOAD and reopening seems to correct the problem, but the real question is how to force Oracle to re-read the metadata without resetting the connection?
This sounds like an issue with TOAD, not oracle. What happens if you do it in SQL*Plus?
I dont know if I understand you but if you got a dblink that points to a SQL server DB in your Oracle DB and you need data in SQL server just do:
SELECT *
FROM TABLE#dblink
SELECT "COL", "COL2", "COL3
from TABLE#dblink
SELECT T."COL", H."COL"
FROM TABLE1#dblink T, TABLE2#dblink H
WHERE T."ID" = H."ID"
Maybe you can do?:
alter view <<view_name>> compile;
I haven't tested this because I have no db link from Oracle to MSSQL.
This seems to be an issue with the Oracle 10g client. The current solution is to disconnect and reconnect. Given that I haven't been able to find anyone else with this problem, i will assume that it is a problem with my client config.