I Created an Approval process which is working properly in Salesforce Classic, but in Lightning whenever I'm clicking on "Submit For Approval" it is giving an error message "Please log in to the full Salesforce site to complete this approval request, which requires you to select the next approver."
Why this error? Did I miss something to configure??
Thanks!
For approval processes that require manual selection, the submitter needs to log in to the full Salesforce site to submit a record for approval.
Process Builder and Workflow are fully supported. Visual Workflow and Approvals are also supported but have some limitations.
Approval Requests:
Users can see approval requests from either their notifications or through the Approval History related list on the record that needs to be approved.
Lightning Experience users can’t see approval requests in Chatter or in the activity timeline on records.
To see the complete list of requests that are waiting for a user’s approval, the user must switch to Salesforce Classic (or use the Salesforce1 mobile app).
This might be the issue causing here.
Related
Requirement: when a Salesforce (SF) User creates an Event and adds Attendees (Contacts) on that Event, each Attendee should receive an invitation email enabling them to add that Event to their respective MS-Outlook or Google Calendars.
Salesforce documentation states that only when creating the Event from SF Classic such invitation emails are being fired from SF's servers (I have tested that from Classic and it works indeed).
But, when the Event is created from Lightning Experience, SF servers will NOT fire these emails and... for that email to be sent, the user creating the Event should have access to the integration between SF and MS-Outlook through Einstein Activity Capture and it is actually MS-Outlook who will send the invitation email.
I have setup Einstein Activity Capture and integrated SF with MS-Outlook and eventually performed the test (creating an Event with Attendees from LEX UI) to verify if the invitation emails are being sent. But, no (invitation emails are NOT being sent).
I have also performed the same test with an integration between SF and Google through Einstein Activity Capture but have got the same result (no invitation emails are being sent)
Have you faced this issue before? Can you help?
Thank you very much.
I have a simple azure logic app as follows.
Now I add a new action after the first one.
Select an email action.
Look for send email action
Now no mater what I do, I get this error
Please check your account info and/or permissions and try again. Details: REST API is not yet supported for this mailbox. This error can occur for sandbox (test) accounts or for accounts that are on a dedicated (on-premise) mail server. clientRequestId: 9295041e-4d27-4d7f-8ac7-9f90f1cc65ff serviceRequestId: 17c7df3b-7f07-6d27-4f7b-68a4475e9b55 More diagnostic information: x-ms-client-request-id is '51B43F16-6D7C-4BE7-9AE2-7B4A6B73BA49'.
I click Change Connection above and I see these increasing number of connection, and I find no way to delete them. See the last image at the bottom.
And when I click Save, I get this message.
Save logic app failed. Failed to save logic app vivek-logic-app. Some of the connections are not authorized yet. If you just created a workflow from a template, please add the authorized connections to your workflow before saving.
And finally when I click Api Connections, I find no connections to delete.
So two questions.
How to authorize hotmail account te be used by Azure Logic App
How to delete the un-necessary connections
Ok, here it is after a good 3 hour PIA.
For the connections to manage(or delete), look at the resource group and not the Logic app.
And next for the send email action, choose Outlook.Com connection and not Office 365 Outlook. Found the answer here. Mine is personal account and not for work or for school.
Once you setup this action successfully, you can take a look at this page for managing the connection access.
I have a little bit of problem with the authentication on Sitecore website. Basically there is a button on the navbar, and when user clicks on the button, it redirects the same user to Salesforce to log in (Implementation of SSO). Basically I am using Salesforce as a identity provider and Sitecore Website as a service provider. Now I have a question? When user is logged, how can I get the ID of that user.
Do users in Sitecore User Manager have the same ID as the users in Salesforce, or I can just get a email to identify the user?
P.S: Sorry if this is a really stupid question, but I am a begineer when it comes to making Sitecore websites and the SAML SSO. Thank you in advance
Stop with the Sitecore and Salesforce for a second, you'll need to cover some basics and click through the login process manually before you automate it.
You probably are using a "connected app" in Salesforce that includes OAuth2 config (consumer key also known as client id; a secret; a list of scopes telling what this app is allowed to do on behalf of this SF user; a list of allowed urls that can login using this consumer key and secret. Etc.) It might even have something about Canvas Apps at bottom of the page.
Next would be - who's logging in. A core Salesforce user or do you have Partner Community, Customer Community (recently rebranded to "Digital Experiences").
Open incognito window and go to https://openidconnect.herokuapp.com/
For login host leave as is if you have production user or test.salesforce.com if you go from sandbox (you can also use branded urls, mycompany--dev.my.salesforce.com etc). If you have a community user you'll have to change the url to whatever is the community base url, like https://dev-mycompany.cs123.force.com/mycommunity
Don't change anything else, click next, next, next. This will take you through OAuth2 "web server flow" (one of many ways to log in). You type the username/password to SF screen and go back to that herokuapp with "authorisation code". The app has few minutes to swap that code for actual final "access token" and couple other pieces of info. Final step in this wizard calls OpenId "userinfo" - returning some info about the user that logged in. That's where you could pull the email if needed (and if there are extra fields you'd like SF to return in this process that's configurable too)
Close that browser window. Check the "connected app" in SF. Open new incognito window, do same thing but this time put your url, consumer key and secret (you might have to edit the app in SF first to allow callbacks to https://openidconnect.herokuapp.com/callback).
So now you should have rough idea about whole login process. Your sitecore app probably does same thing, receives authorisation code and exchanges it for final token. At that point you have valid SF session ID you could use to call that "userinfo", run queries (if the app allowes API access, check the "scopes") etc.
I doubt the Sitecore developer created it all by hand, you probably have some Spring stuff like spring.security.oauth2.client... My Java days are long gone but if you get better at manual click-click-click through the flow you should be able to follow existing code?
It's a big topic and there are other ways to do it (other OAuth flows, sending info about the current user when you have external page embedded in SF as iframe, you'd need to read about "canvas apps")... but that's best guess based on info you provided. You might want to check some trailhead courses too like https://trailhead.salesforce.com/content/learn/projects/build-a-connected-app-for-api-integration/implement-the-oauth-20-web-server-authentication-flow
https://developer.salesforce.com/docs/atlas.en-us.api_rest.meta/api_rest/intro_oauth_and_connected_apps.htm
https://developer.salesforce.com/docs/atlas.en-us.api_streaming.meta/api_streaming/code_sample_auth_oauth.htm (Java but very hand-crafted raw HTTP, probably that Spring security is better)
Non-technical person here 🙋♂️
I'm having an issue where (using the Oauth 2.0 Playground) I authorize an internal user's GMB account and configure real-time notifications to be sent to our GCP topic. Every few days or so, notifications stop getting sent to our topic and when I check the notification settings for that account, they have been subscribed to an unknown GCP topic. I can reconfigure the notifications settings again, but every few days they are reconfigured to the unknown GCP topic.
It's possible some other app is overwritting my changes periodically, but I am having trouble figuring out where they're coming from.
Is there a log I can review to know where the request to change the notification settings is coming from?
When using the OAuth 2.0 Playground to configure settings, do they "expire" at some point? If so, is how do I prevent that from happening?
Thanks in advance for your help!
You can start looking into when and who created the unknown GCP topics by checking your Cloud Logging for created topics. You can do this by:
Open your Google Cloud Console
Open "Logging"
There should be a "Query" tab and select it.
Input protoPayload.methodName="google.pubsub.v1.Publisher.CreateTopic" and click "Run Query". You can check this reference if you'd like to see other logs related to Pub/Sub.
Click "LAST 1 HOUR" to adjust the time parameters of your log query. (Example: adjust it to a whole month to query all Created topics within a month)
Click the ">" beside the result and expand the log.
There are lots of info like the created topic name, what email authenticated this request, etc. In your case you should look out for field authenticationInfo for you to check who invoked the request:
authenticationInfo: {
principalEmail: "email-used-to-create-the-topic#example.com"
principalSubject: "user:email-used-to-create-the-topic#example.com"
}
NOTE: For testing purposes I blacked out my project-id and email for this example. Also the topic I created is log-this-topic and the email in the log mine since I was the one that created the topic.
OAuth have set rules for expiration, you can check it on Refresh Token expiration.
I am trying to create a custom paypal button for selling digital goods, that will direct the buyer to a link that will allow him to download the file.
I've read a bit this paypal article about advanced html variables but I am not sure which I have to use to make it work: https://developer.paypal.com/webapps/developer/docs/classic/paypal-payments-standard/integration-guide/Appx_websitestandard_htmlvariables/
Obviously the download should only initiate based on the payment ID to prevent free downloads, or is that done automatically by paypal?
What I would recommend us utilizing Instant Payment Notification (IPN) to handle all your post-payment processing tasks like updating your database, sending out email notifications (including one with a download link), etc.
Instant Payment Notification (IPN) is a message service that notifies
you of events related to PayPal transactions. You can use IPN messages
to automate back-office and administrative functions, such as
fulfilling orders, tracking customers, and providing status and other
transaction-related information.
This will allow you to not only automate the procedures, but also correctly handle things like e-checks or any other type of payment that may originally be in a "pending" status. You wouldn't want to deliver the digital goods until that payment actually clears. With IPN you will get 1 notification that your script can handle when the payment comes through as pending, and you would get another one when the payment updates to Completed, or Failed, or whatever.
The IPN's happen in real-time so buyers won't have to wait on anything. Whatever you're doing within the script would happen instantly upon the transaction completing.