TFS 2015 connection with SQL Server 2014 - sql-server

I am trying to connect my TFS-2015 residing on one machine to the SQL Server 2014 residing on another machine.
This is my SQL Server instance name:
This is the error I get on TFS:
Please guide me the fix here.

It could be a firewall setting on the sql server. Can you connect using SSMS from another machine in your network? Are you using the default port? If so is there a firewall rule allowing traffic on 1433?
If connection is not the problem then it looks like a user right issue. The account running TFS and if it is different the account installing TFS will need a proper login to SQL.
https://blogs.msdn.microsoft.com/bharry/2010/08/20/database-permissions-required-to-configure-tfs/

Look at your screenshot: You only gave it a SQL instance name (MSSQLSERVER). You have to provide a database server name as well. How is it going to know what server to connect to otherwise?

Related

Connect to Server in SMSS 2017 on Virtual Machine

Need some help understanding how to connect to Sql Management Server Studios 2017 from my Azure Virtual Machine.
I thought I just enter my Computer (VM-computer name) in server name, see picture below, but I get the error saying: The server was not found or is not accesible. Do I need to configure it to allow remote access? Am lost and have tried googling without result, any easy step-by-step guides?
pic of login
You can use your server name in "servername" or . and the connect. If still not connecting do check whether it is named instances running in SQL Server Configuration Manager. If it is running with named instance you need to provide "Servername\namedinstancename" in server name
I did not have any sql installed, only the SSMS..........rookie move.

SQL server remote access

I am trying to connect to a remote SQL database.
I have the access and the sql server is configured for remote login.
I can login to the server from another machine (B) but not from my machine (A).
Both the machines (A and B) are on same domain. None have their IP white-listed.
In short, I do not think there is an issue on sql server side.
On my side,
I tried modifying DTC and firewall properties. (Not sure if the modifications are correct).
Could anybody please help.
Are you trying to connect through software? You said "SQL Server" so I'll assume you're talking about using SSMS to connect to a server?
You said that you can login to the SQL server from the box that the server is on but not from a remote computer. This sounds like a permissions problem to me.
Is the account you created setup for Windows authentication? Should you be using a local SQL server account instead?
Some more information could help everyone troubleshoot.
you set blind address in the sql server config?

SQL Connection Error While Connecting to Local Instance Using SSMS

I am trying to connect local instance in my SSMS 2005. it is showing me this error.. while i can connect the my system instance remotely or using Code. Last time it was working 2 days ago. now how suddenly this can happen.
In the Sql Server Configuration Manager->SQL Server Network Configuration->Protocols for MSSQLSERVER (or the name of your instance) check if TCP/IP Protocol is Enabled. If not, set to...
SQL Server Configuration Manager
If the solution above isnĀ“t work. I suggest you uninstall and reinstall SQL Server native client on the local computer

Check client connection to SQL Server 2008 Express [duplicate]

I just installed SQL Server 2008 Express on my Vista SP1 machine. I previously had 2005 on here and used it just fine with the old SQL Server Management Studio Express. I was able to connect with no problems to my PC-NAME\SQLEXPRESS instance (no, PC-NAME is not my computer name ;-).
I uninstalled 2005 and SQL Server Management Studio Express. I then installed SQL Server 2008 Express on my machine and elected to have it install SQL Server Management Studio Basic.
Now, when I try to connect to PC-NAME\SQLEXPRESS (with Windows Authentication, like I always did), I get the following message:
Cannot connect to PC-NAME\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
When I installed SQL Server 2008, I had it use SQLEXPRESS as the local instance name. As far as I can tell, through SQL Server Configuration Manager, SQL Server is configured to allow remote connections.
When I went to the help link it mentions, the help page suggests the following:
Make sure that the SQL Server Browser service is started on the server.
Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections.
Well, as far as I can tell, there is no SQL Server Browser service on my system (looked in MMC for one, couldn't find one).
And the SQL Server Surface Area Configuration tool doesn't exist in SQL Server 2008. So good job there with your help documentation, Microsoft ;-).
I'm at a loss for what to do right now. I had a lot of work I was hoping to get done today after upgrading to 2008 (the person I'm working with got it up and running with no problem and told me it would be easy - he's also far better with database stuff that I am). Does anyone have any idea what might be wrong? I'd really appreciate it. If I can't get this working in a few hours, I'm going back to SQL Server 2005 (if that will even work, gah...).
Edit: I have tried turning Windows Firewall off, and that did not help. Also, I noticed that I do not have a "Data" directory under my SQL Server 2008 install directory tree - could I have possibly set something up wrong when I installed it?
Please check the ServerName which you provided. It should match with the below shown Name in the UserName textbox, and that name should followed with \SQLEXPRESS:
Start your Local SQL Server Service
Start SQL Config Manager: Click Start -> Microsoft SQL Server 2008 R2 -> SQL Server
Configuration Manager
Start SQL Services: Set the SQL Server (SQLEXPRESS) and SQL Server Browser services to automatic
start mode. Right-click each service -> Properties -> Go into the Service Tab
This will ensure they start up again if you restart your computer. Please check to ensure the state is "Running" for both services.
Login and authenticate with your Local SQL Server
Now open up SQL Server Management Studio and click "Connect to Object
Explorer" and select Server Name:
[Your PC name]\SQLEXPRESS
Example: 8540P-KL\SQLEXPRESS or (localhost)\SQLEXPRESS
To find your PC name: Right click My Computer -> Properties ->
Computer Name tab
Alternative: Login using windows authentication: Using the user name [Your
Domain]/[Your User Name]
Setup User Account
Create a new Login acct: In SQL Mgmt Studio -> Expand your local Server -> Security -> Right
click on Logins -> New Login
Set Password settings on New User Account: Uncheck Enforce password policy, password expiration and user must
change pw(Since this is local) Default database -> Your Database
Grant roles to New User Account: User Mapping Page -> Map to your db and grant db_owner role Status
Page -> Grant Permission to connect and Enable Login
Setup Access Permissions/Settings for User
Enable all auth modes: Right click your Local Server -> Properties -> Security Tab -> Enable
SQL Server and Windows Authentication Mode
Enable TCP/IP: Open SQL Server Configuration Manager -> SQL Server Network
Configuration -> Protocols for SQLEXPRESS -> Enable TCP/IP
Restart SQL Server Service: You will have to restart the SQL Server(SQLEXPRESS) after enabling TCP/IP
Database Properties File for Spring Project
database.url=jdbc:jtds:sqlserver://[local PC Computer
name];instance=SQLEXPRESS;DatabaseName=[db name];
database.username=[Your user name] database.password=[Your password]
database.driverClassName=net.sourceforge.jtds.jdbc.Driver
If you want to view larger screen shots and better formatting of the answer with more details please view the blog article below:
Setting up a Local Instance of SQL Server 2008 Blog Post:
I used (LocalDB)\MSSQLLocalDB as the server name, I was then able to see all the local databases.
Haha, oh boy, I figured it out. Somehow, someway, I did not install the Database Engine when I installed SQL Server 2008. I have no idea how I missed that, but that's what happened.
I know this question is old, but in case it helps anyone make sure the SQL Server Browser is running in the Services MSC. I installed SQL Server Express 2008 R2 and the SQL Server Browser Service was set to Disabled.
Start->Run->Services.msc
Find "SQL Server Browser"->Right Click->Properties
Set Startup Type to Automatic->Click Apply
Retry your connection.
I've just solved a problem related to this which may help other people.
Initially when loading up MSSMSE it had the server as PC_NAME\SQLEXPRESS and when I tried to connect it gave me Error: 26 - Error Locating Server/Instance Specified, so I went into SQL Server Configuration Manager to check if my SQL Server Browser and SQL Server services were running and set to automatic, only to find that instead of saying SQL Server (SQLEXPRESS) it says SQL Server(MSSQLSERVER).
I then tried connecting to PC-NAME\MSSQLSERVER and this time got SQL Network Interfaces, error: 25 - Connection string is not valid) (MicrosoftSQL Server, Error: 87) The parameter is incorrect so I googled this error and found that somebody had suggested that instead of using PC-NAME\MSSQLSERVER just use PC-NAME as the Server Name at the server connection interface, and this seems to work.
There's a link here http://learningsqlserver.wordpress.com/2011/01/21/what-version-of-sql-server-do-i-have/ which explains that MSSQLSERVER is the default instance and can be connected to by using just your hostname.
I think this may have arisen because I've had SQL Server 2008 installed at some point in the past.
Under Configuration Manager and Network Configuration and Protocols for your instance is TCP/IP Enabled? That could be the problem.
var.connectionstring = "server=localhost; database=dbname; integrated security=yes"
or
var.connectionstring = "server=localhost; database=dbname; login=yourlogin; pwd=yourpass"
For me, I was only able to get it to work by using "." in the server name field; was banging away for awhile trying different combos of the user name and server name. Note that during install of the server (ie this file: SQLEXPR_x64_ENU.exe) i checked default instance which defaults the name to MSSQLSERVER; the above high voted answers might be best used for separate named (ie when you need more than 1) server instances.
both of these videos helped me out:
use dot for server name: https://www.youtube.com/watch?v=DLrxFXXeLFk
general setup: https://www.youtube.com/watch?v=vng0P8Gfx2g
One of the first things that you should check is that the SQL Server (MSSQLSERVER) is started. You can go to the Services Console (services.msc) and look for SQL Server (MSSQLSERVER) to see that it is started. If not, then start the service.
You could also do this through an elevated command prompt by typing net start mssqlserver.
For me it was a windows firewall issue. Allow incoming connections. Opening port didn't work but allow programs did.
Link
Link2

Not Connecting to the SQL Server

I installed SQL Server Management Studio on my machine and once it was succesfully installed, I tried to connect to the local Database Engine but I was not succesful connecting to it it showing up an error showing as Cannot connect to the Local or having Network Related problems in the connection. I got a question here once I download the SQL Server management studio Do I need to do something else to get connected to the Local SQL Server.
Thanks,
Pranay.
No you don't need by default you can connect to local machine. You might have a problem connecting from other machine in the network if TCP is not enabled, but local should work.
Make sure you typed your 'sa' password correctly or use Windows Authentication.
Did you check in Windows Services? There is the service SQL Server (SQLEXPRESS) and SQL Server Browser which must be running.
Go to your Sql Server Configuration Manager and make sure that SQL Server is running. Otherwise right click and click Start.
And sometimes you need to Enable TCP/IP in your Protocols again in your Sql Server Configuration Manager

Resources