I have tried to integrate Gmail Api in my android app using the follwing tutorial
https://developers.google.com/gmail/api/quickstart/android#step_5_setup_the_sample
I followed every steps , but when i tried to test gmail api
The following error occurred:
403 Forbidden
{
"code" : 403,
"errors" : [ {
"domain" : "usageLimits",
"message" : "Access Not Configured. Gmail API has not been used in project 608941808256 before or it is disabled. Enable it by visiting https://console.developers.google.com/apis/api/gmail/overview?project=608941808256 then retry. If you enabled this API recently, wait a few minutes for the action to propagate to our systems and retry.",
"reason" : "accessNotConfigured",
"extendedHelp" : "https://console.developers.google.com/apis/api/gmail/overview?project=608941808256"
} ],
"message" : "Access Not Configured. Gmail API has not been used in project 608941808256 before or it is disabled. Enable it by visiting https://console.developers.google.com/apis/api/gmail/overview?project=608941808256 then retry. If you enabled this API recently, wait a few minutes for the action to propagate to our systems and retry."
}
I have enabled Gmail Api and Google plus Api too . still the problem exist
Edit : My developer console page
I think i found what mistake i have made ,
The SHA1 KEY I provided in the developer console is the signed version of my app , which is not placed in play store yet
I changed the SHA1 Key to debug version of the app and it worked
I registered the SHA1 key for the androiddebug (debug.keystore) and the key for the signed-release version (your own keystore) creating two OAuth 2.0 client IDs. This allowed me to test my app.
Remember that sometimes the changes take a few hours to be reflected.
Related
I'm very new to ADFS and the Web Application Proxy. That said, I've recently setup an ADFS server and a WAP server and have all of the configuration setup to successfully handle SAML SSO to my custom application.
I am now attempting to use the Webfinger endpoint. By default, that endpoint is enabled (and proxy enabled). Unfortunately, I have not been able to get any meaningful response from this endpoint and am unsure even how to set it up. Searching for "ADFS Webfinger" documentation has been fruitless. Honestly, I can't find anything other than discussions of an Event Viewer error and other useless information.
I have attempted various combinations of URLs.
https://my-adfs-server/.well-known/webfinger?resource=https%3A%2F%2Fmy-adfs-server%2Fadfs%2F/ls&rel=http://schemas.microsoft.com/rel/trusted-realm
This gives me back a JSON:
{
"subject": "https://my-adfs-server",
"links": [
{
"rel": "http://schemas.microsoft.com/rel/trusted-realm",
"href": "https://my-adfs-server"
}
]
}
but it is the only URL I have found that returns anything.
https://my-adfs-server/.well-known/webfinger?resource=acct:<myemail>
This gives me a 404 with a valid email (acct).
What am I missing? Even if that last URL was working, how do I resolve it to specify information that should be returned in the JRD document for this particular account? Do I need IIS installed (I don't have it installed currently) and custom code?
Thanks for any help/insight.
Pink
We would like to automatically create a project ID and install our ULAPPH Cloud Desktop application using the App Engine Admin API (REST) and Golang.
https://cloud.google.com/appengine/docs/admin-api/?hl=en_US&_ga=1.265860687.1935695756.1490699302
https://ulapph-public-1.appspot.com/articles?TYPE=ARTICLE&DOC_ID=3&SID=TDSARTL-3
We were able to get a token but when we tried to create a project ID, we get the error below.
[Response OK] Successful connection to Appengine Admin API.
[Token] { "access_token" : "TOKEN_HERE", "expires_in" : 3599, "token_type" : "Bearer" }
[Response Code] 403
[Response Body] { "error": { "code": 403, "message": "Operation not allowed", "status": "PERMISSION_DENIED", "details": [ { "#type": "type.googleapis.com/google.rpc.ResourceInfo", "resourceType": "gae.api", "description": "The \"appengine.applications.create\" permission is required." } ] } }
We are just using the REST API calls. Request for token was successful as you can see above and the scope is ok as well. Now, when we posted the request to create application, we are having the error that says "appengine.application.create" permission required.
How do we specify the permission?
What are the possible reasons why we are getting that error? Do we missed to send a field in JSON or in query?
As per below link, we just need to pass the json containing the id and location. We also just need to pass the token in the Authorization header. The same logic I have used successfully in accessing Youtube, Drive APIs etc so not sure what needs to be done since I have followed the docs available.
I have also posted the same issue in Google Groups and now waiting for their reply.
It seems you've given no details about how you set up the account you're using to authorize the request. You'll need to make sure the appengine.applications.create permission is given to the account you're using, as mentioned in the error text. You can use the Google Identity and Access Management (IAM) API for this.
(by the way, I'd given this answer in the original thread, although you didn't reply or seem to take action on it. check it out! this is likely the solution you need!)
I had created few APIs earlier and published the same through API Publisher in WSO2 API Manager(APIM) , I was able to view them in Publisher Dashboard and Store Dashboard as well.I had subscribed them and was able to use the APIs.
Recently, I am unable to see any of those created APIs in Publisher Dashboard or Store Dashboard as well in API Manager.
I have not made any changes to configuration of API Manager.
I tried to publish APIs using REST APIs exposed by WSO2 APIM but I got following error message.
Publisher Response :
{
"error" : true,
"message" : "Failed to change the life cycle status : An exception occurred while executing handler chain. SolrCore 'registry-indexing' is not available due to init failure: Error opening new searcher"
}
I have checked Thrift ports (Both are on 10397 and I have tried disabling them too as per other posts on stack overflow).
I have checked API Gateway credentials it is as they were by default i.e
<APIGateway>
<!-- The environments to which an API will be published -->
<Environments>
<!-- Environments can be of different types. Allowed values are 'hybrid', 'production' and 'sandbox'.
An API deployed on a 'production' type gateway will only support production keys
An API deployed on a 'sandbox' type gateway will only support sandbox keys
An API deployed on a 'hybrid' type gateway will support both production and sandbox keys. -->
<!-- api-console element specifies whether the environment should be listed in API Console or not -->
<Environment type="hybrid" api-console="true">
<Name>Production and Sandbox</Name>
<Description>This is a hybrid gateway that handles both production and sandbox token traffic.</Description>
<!-- Server URL of the API gateway -->
<ServerURL>https://localhost:${mgt.transport.https.port}${carbon.context}services/</ServerURL>
<!-- Admin username for the API gateway. -->
<Username>${admin.username}</Username>
<!-- Admin password for the API gateway.-->
<Password>${admin.password}</Password>
<!-- Endpoint URLs for the APIs hosted in this API gateway.-->
<GatewayEndpoint>http://${carbon.local.ip}:${http.nio.port},https://${carbon.local.ip}:${https.nio.port}</GatewayEndpoint>
</Environment>
</Environments>
</APIGateway>
I am unable to create new APIs as well since it seems there is some problem with Registry.
P.S : It also gives message that MQTT is disabled
Can anyone please help out ?
Please check screenshots for more clarity
Looks like an indexing issue. Shall we try what is mentioned in here. This will reindex the APIs.
I have been using outlook rest api's to read/create/update calendar events of outlook account.
Followed all the steps https://dev.outlook.com/RestGettingStarted/
It works very well for the subscription account's.
But the api does not work to load the calendar events of my personal outlook account ex: phani.xxx#outlook.com.
API responds with below error:
"error": {
"code": "ErrorMissingEmailAddress",
"message": "When making a request as an account that does not have a mailbox, you must specify the mailbox primary SMTP address for any distinguished folder Ids."
}
I have tried the same with outlook sandbox got the same response.
Any help on this to get this api working for any outlook account. Will be highly appreciated.
This is likely due to your account not yet being enabled for the REST API. There's an issue with the v2 endpoint not returning the proper error message in this case.
I wrote a webapp with angularjs frontend, google app engine for storing data, and google cloud endpoints for api access from the frontend client. I tested everything fine locally, but after deploying, accessing the api from the frontend javascript client gives me the following error:
[
{
"error": {
"code": 403,
"message": "Access Not Configured",
"data": [
{
"domain": "usageLimits",
"reason": "accessNotConfigured",
"message": "Access Not Configured"
}
]
},
"id": "gapiRpc"
}
]
I've checked the production api explorer after deployment and it works fine. Also, I tried directly accessing the api by URL which also works fine. Just the frontend client does not work. Any ideas?
Turns out I set the API key in the client with gapi.client.setApiKey(API_KEY); where the API Key is the browser key from the cloud console. I removed this and it works fine. I have no idea what the API key is for.
I'm looking at the problem now on one of my projects. Might be that the ipv6 address must be registered for the project. Take a look at this post Google API returning Access Not Configured
The usual reason for this is that the API, which is being queried is not yet enabled in Google Console by the time of the request. Once it is turned on - error goes away.