I am trying to pass an array to a conca.bat file so I can concatenate all the strings that list or array has.
I have been able to concatenate, buty just if I put the Array by hand, but I am not able to do it when I pass ii from command line...
It works:
FOR %%i IN (12346,49874,48954) DO call :concat %%i
set var=%var%%1;
Doesn´t work
FOR %%i IN %1 DO call :concat %%i
set var=%var%%1;
What is the structure I must follow from the command prompt?
conca.bat "12346,49874"
or
conca.bat {12346,49874}
There are no real lists or arrays in CMD. However, if I've understood your question correctly, you are trying to do something like this:
concat.bat 123 456 789
and want the output to be 123456789. If this is the case, SHIFT is the magic command you are looking for. This should do it:
#ECHO OFF
SET concatString=
:LOOP
IF [%1]==[] GOTO ENDLOOP
SET concatString=%concatString%%1
SHIFT
GOTO LOOP
:ENDLOOP
ECHO %concatString%
PAUSE
When you pass parameters to a bat file via command line, they are accessible via %1, %2, %3 and so in. This means for concat.bat a b c that %1 is a, %2 is b and %3 is c. The only problem is that we might not know how many parameters there will be and you want your script to work with only one parameter as well as with 100 of them. At this point SHIFT is saving the day.
SHIFT does one simple thing. It moves the index of the parameters to the right, so the "old" %1 disappears, %2 becomes %1, %3 becomes %2 and so on. We just keep on looping until the last passed parameter becomes %1. After another shift there is no value left which can be assigned to %1 so [%1]==[] becomes true and we jump out of the loop.
I want to know if it is possible to start a batch thin in a particular goto function from another batch?
thus not just starting another batch file but also have the "mother" batch select a particular goto option with in the "child"batch?
1.bat
call 2.bat /c goto :this
call 2.bat /c call :that
.
2.bat
if "%1"=="/c" shift & shift & %2 %3
goto :eof
:this
echo This!
goto :eof
:that
echo That!
goto :eof
EDIT: My original post was closest to correct. But I've corrected my mistake(s).
I double shift to remove %1 and %2 to the left, bringing any other variables passed to the %1 and %2 positions. I then execute %2 and %3 because the effect of the shifts won't take effect until the line is finished being executed / interpreted.
Just have the parent/mother batch file and pass a parameter to the child batch file.
mom.bat
#ECHO OFF
ECHO Here we go
CALL child.bat 3
PAUSE
child.bat
#ECHO OFF
IF "%1"=="1" Goto 1
IF "%1"=="2" Goto 2
IF "%1"=="3" Goto 3
EXIT
:1
ECHO 1!
PAUSE
EXIT
:2
ECHO 2!
PAUSE
EXIT
:3
ECHO 3!
PAUSE
EXIT
This example should echo 3! as the mother batch file passes the parameter 3 to the child batch file.
Yes, but it's a hack.
Normally you would do this with a bit of help from the called batch file.
main.bat
call second.bat :theFunction
*second.bat
goto %1
...
:theFunction
The hack uses a feature-bug, you only need the same label as in the second.bat.
And it only works if you start the second.bat without call
main.bat
call :theFunction
echo back in main
exit /b
:theFunction
second.bat
echo back in the func in main, this line will never reached
exit /b This line will also never reached
When the second.bat returns , it will return to the line after the call in main.bat
In the batch file that you are calling put this at the top
if not %1=="" goto :%1
In the batch file you are using to call it put
call b.bat labelname
Obviously this is limited depending on what you are trying to do but the basic functionality works.
I need to pass an ID and a password to a batch file at the time of running rather than hardcoding them into the file.
Here's what the command line looks like:
test.cmd admin P#55w0rd > test-log.txt
Another useful tip is to use %* to mean "all". For example:
echo off
set arg1=%1
set arg2=%2
shift
shift
fake-command /u %arg1% /p %arg2% %*
When you run:
test-command admin password foo bar
The above batch file will run:
fake-command /u admin /p password admin password foo bar
I may have the syntax slightly wrong, but this is the general idea.
Here's how I did it:
#fake-command /u %1 /p %2
Here's what the command looks like:
test.cmd admin P#55w0rd > test-log.txt
The %1 applies to the first parameter the %2 (and here's the tricky part) applies to the second. You can have up to 9 parameters passed in this way.
If you want to intelligently handle missing parameters you can do something like:
IF %1.==. GOTO No1
IF %2.==. GOTO No2
... do stuff...
GOTO End1
:No1
ECHO No param 1
GOTO End1
:No2
ECHO No param 2
GOTO End1
:End1
Accessing batch parameters can be simple with %1, %2, ... %9 or also %*,
but only if the content is simple.
There is no simple way for complex contents like "&"^&, as it's not possible to access %1 without producing an error.
set var=%1
set "var=%1"
set var=%~1
set "var=%~1"
The lines expand to
set var="&"&
set "var="&"&"
set var="&"&
set "var="&"&"
And each line fails, as one of the & is outside of the quotes.
It can be solved with reading from a temporary file a remarked version of the parameter.
#echo off
SETLOCAL DisableDelayedExpansion
SETLOCAL
for %%a in (1) do (
set "prompt="
echo on
for %%b in (1) do rem * #%1#
#echo off
) > param.txt
ENDLOCAL
for /F "delims=" %%L in (param.txt) do (
set "param1=%%L"
)
SETLOCAL EnableDelayedExpansion
set "param1=!param1:*#=!"
set "param1=!param1:~0,-2!"
echo %%1 is '!param1!'
The trick is to enable echo on and expand the %1 after a rem statement (works also with %2 .. %*).
So even "&"& could be echoed without producing an error, as it is remarked.
But to be able to redirect the output of the echo on, you need the two for-loops.
The extra characters * # are used to be safe against contents like /? (would show the help for REM).
Or a caret ^ at the line end could work as a multiline character, even in after a rem.
Then reading the rem parameter output from the file, but carefully.
The FOR /F should work with delayed expansion off, else contents with "!" would be destroyed.
After removing the extra characters in param1, you got it.
And to use param1 in a safe way, enable the delayed expansion.
Yep, and just don't forget to use variables like %%1 when using if and for and the gang.
If you forget the double %, then you will be substituting in (possibly null) command line arguments and you will receive some pretty confusing error messages.
A friend was asking me about this subject recently, so I thought I'd post how I handle command-line arguments in batch files.
This technique has a bit of overhead as you'll see, but it makes my batch files very easy to understand and quick to implement. As well as supporting the following structures:
>template.bat [-f] [--flag] [--namedvalue value] arg1 [arg2][arg3][...]
The jist of it is having the :init, :parse, and :main functions.
Example usage
>template.bat /?
test v1.23
This is a sample batch file template,
providing command-line arguments and flags.
USAGE:
test.bat [flags] "required argument" "optional argument"
/?, --help shows this help
/v, --version shows the version
/e, --verbose shows detailed output
-f, --flag value specifies a named parameter value
>template.bat <- throws missing argument error
(same as /?, plus..)
**** ****
**** MISSING "REQUIRED ARGUMENT" ****
**** ****
>template.bat -v
1.23
>template.bat --version
test v1.23
This is a sample batch file template,
providing command-line arguments and flags.
>template.bat -e arg1
**** DEBUG IS ON
UnNamedArgument: "arg1"
UnNamedOptionalArg: not provided
NamedFlag: not provided
>template.bat --flag "my flag" arg1 arg2
UnNamedArgument: "arg1"
UnNamedOptionalArg: "arg2"
NamedFlag: "my flag"
>template.bat --verbose "argument #1" --flag "my flag" second
**** DEBUG IS ON
UnNamedArgument: "argument #1"
UnNamedOptionalArg: "second"
NamedFlag: "my flag"
template.bat
#::!/dos/rocks
#echo off
goto :init
:header
echo %__NAME% v%__VERSION%
echo This is a sample batch file template,
echo providing command-line arguments and flags.
echo.
goto :eof
:usage
echo USAGE:
echo %__BAT_NAME% [flags] "required argument" "optional argument"
echo.
echo. /?, --help shows this help
echo. /v, --version shows the version
echo. /e, --verbose shows detailed output
echo. -f, --flag value specifies a named parameter value
goto :eof
:version
if "%~1"=="full" call :header & goto :eof
echo %__VERSION%
goto :eof
:missing_argument
call :header
call :usage
echo.
echo **** ****
echo **** MISSING "REQUIRED ARGUMENT" ****
echo **** ****
echo.
goto :eof
:init
set "__NAME=%~n0"
set "__VERSION=1.23"
set "__YEAR=2017"
set "__BAT_FILE=%~0"
set "__BAT_PATH=%~dp0"
set "__BAT_NAME=%~nx0"
set "OptHelp="
set "OptVersion="
set "OptVerbose="
set "UnNamedArgument="
set "UnNamedOptionalArg="
set "NamedFlag="
:parse
if "%~1"=="" goto :validate
if /i "%~1"=="/?" call :header & call :usage "%~2" & goto :end
if /i "%~1"=="-?" call :header & call :usage "%~2" & goto :end
if /i "%~1"=="--help" call :header & call :usage "%~2" & goto :end
if /i "%~1"=="/v" call :version & goto :end
if /i "%~1"=="-v" call :version & goto :end
if /i "%~1"=="--version" call :version full & goto :end
if /i "%~1"=="/e" set "OptVerbose=yes" & shift & goto :parse
if /i "%~1"=="-e" set "OptVerbose=yes" & shift & goto :parse
if /i "%~1"=="--verbose" set "OptVerbose=yes" & shift & goto :parse
if /i "%~1"=="--flag" set "NamedFlag=%~2" & shift & shift & goto :parse
if /i "%~1"=="-f" set "NamedFlag=%~2" & shift & shift & goto :parse
if not defined UnNamedArgument set "UnNamedArgument=%~1" & shift & goto :parse
if not defined UnNamedOptionalArg set "UnNamedOptionalArg=%~1" & shift & goto :parse
shift
goto :parse
:validate
if not defined UnNamedArgument call :missing_argument & goto :end
:main
if defined OptVerbose (
echo **** DEBUG IS ON
)
echo UnNamedArgument: "%UnNamedArgument%"
if defined UnNamedOptionalArg echo UnNamedOptionalArg: "%UnNamedOptionalArg%"
if not defined UnNamedOptionalArg echo UnNamedOptionalArg: not provided
if defined NamedFlag echo NamedFlag: "%NamedFlag%"
if not defined NamedFlag echo NamedFlag: not provided
:end
call :cleanup
exit /B
:cleanup
REM The cleanup function is only really necessary if you
REM are _not_ using SETLOCAL.
set "__NAME="
set "__VERSION="
set "__YEAR="
set "__BAT_FILE="
set "__BAT_PATH="
set "__BAT_NAME="
set "OptHelp="
set "OptVersion="
set "OptVerbose="
set "UnNamedArgument="
set "UnNamedArgument2="
set "NamedFlag="
goto :eof
There is no need to complicate it. It is simply command %1 %2 parameters, for example,
#echo off
xcopy %1 %2 /D /E /C /Q /H /R /K /Y /Z
echo copied %1 to %2
pause
The "pause" displays what the batch file has done and waits for you to hit the ANY key. Save that as xx.bat in the Windows folder.
To use it, type, for example:
xx c:\f\30\*.* f:\sites\30
This batch file takes care of all the necessary parameters, like copying only files, that are newer, etc. I have used it since before Windows. If you like seeing the names of the files, as they are being copied, leave out the Q parameter.
In batch file
set argument1=%1
set argument2=%2
echo %argument1%
echo %argument2%
%1 and %2 return the first and second argument values respectively.
And in command line, pass the argument
Directory> batchFileName admin P#55w0rd
Output will be
admin
P#55w0rd
#ECHO OFF
:Loop
IF "%1"=="" GOTO Continue
SHIFT
GOTO Loop
:Continue
Note: IF "%1"=="" will cause problems if %1 is enclosed in quotes itself.
In that case, use IF [%1]==[] or, in NT 4 (SP6) and later only, IF "%~1"=="" instead.
Everyone has answered with really complex responses, however it is actually really simple. %1 %2 %3 and so on are the arguements parsed to the file. %1 is arguement 1, %2 is arguement 2 and so on.
So, if I have a bat script containing this:
#echo off
echo %1
and when I run the batch script, I type in this:
C:> script.bat Hello
The script will simply output this:
Hello
This can be very useful for certain variables in a script, such as a name and age. So, if I have a script like this:
#echo off
echo Your name is: %1
echo Your age is: %2
When I type in this:
C:> script.bat Oliver 1000
I get the output of this:
Your name is: Oliver
Your age is: 1000
Let's keep this simple.
Here is the .cmd file.
#echo off
rem this file is named echo_3params.cmd
echo %1
echo %2
echo %3
set v1=%1
set v2=%2
set v3=%3
echo v1 equals %v1%
echo v2 equals %v2%
echo v3 equals %v3%
Here are 3 calls from the command line.
C:\Users\joeco>echo_3params 1abc 2 def 3 ghi
1abc
2
def
v1 equals 1abc
v2 equals 2
v3 equals def
C:\Users\joeco>echo_3params 1abc "2 def" "3 ghi"
1abc
"2 def"
"3 ghi"
v1 equals 1abc
v2 equals "2 def"
v3 equals "3 ghi"
C:\Users\joeco>echo_3params 1abc '2 def' "3 ghi"
1abc
'2
def'
v1 equals 1abc
v2 equals '2
v3 equals def'
C:\Users\joeco>
FOR %%A IN (%*) DO (
REM Now your batch file handles %%A instead of %1
REM No need to use SHIFT anymore.
ECHO %%A
)
This loops over the batch parameters (%*) either they are quoted or not, then echos each parameter.
I wrote a simple read_params script that can be called as a function (or external .bat) and will put all variables into the current environment. It won't modify the original parameters because the function is being called with a copy of the original parameters.
For example, given the following command:
myscript.bat some -random=43 extra -greeting="hello world" fluff
myscript.bat would be able to use the variables after calling the function:
call :read_params %*
echo %random%
echo %greeting%
Here's the function:
:read_params
if not %1/==/ (
if not "%__var%"=="" (
if not "%__var:~0,1%"=="-" (
endlocal
goto read_params
)
endlocal & set %__var:~1%=%~1
) else (
setlocal & set __var=%~1
)
shift
goto read_params
)
exit /B
Limitations
Cannot load arguments with no value such as -force. You could use -force=true but I can't think of a way to allow blank values without knowing a list of parameters ahead of time that won't have a value.
Changelog
2/18/2016
No longer requires delayed expansion
Now works with other command line arguments by looking for - before parameters.
Inspired by an answer elsewhere by #Jon, I have crafted a more general algorithm for extracting named parameters, optional values, and switches.
Let us say that we want to implement a utility foobar. It requires an initial command. It has an optional parameter --foo which takes an optional value (which cannot be another parameter, of course); if the value is missing it defaults to default. It also has an optional parameter --bar which takes a required value. Lastly it can take a flag --baz with no value allowed. Oh, and these parameters can come in any order.
In other words, it looks like this:
foobar <command> [--foo [<fooval>]] [--bar <barval>] [--baz]
Here is a solution:
#ECHO OFF
SETLOCAL
REM FooBar parameter demo
REM By Garret Wilson
SET CMD=%~1
IF "%CMD%" == "" (
GOTO usage
)
SET FOO=
SET DEFAULT_FOO=default
SET BAR=
SET BAZ=
SHIFT
:args
SET PARAM=%~1
SET ARG=%~2
IF "%PARAM%" == "--foo" (
SHIFT
IF NOT "%ARG%" == "" (
IF NOT "%ARG:~0,2%" == "--" (
SET FOO=%ARG%
SHIFT
) ELSE (
SET FOO=%DEFAULT_FOO%
)
) ELSE (
SET FOO=%DEFAULT_FOO%
)
) ELSE IF "%PARAM%" == "--bar" (
SHIFT
IF NOT "%ARG%" == "" (
SET BAR=%ARG%
SHIFT
) ELSE (
ECHO Missing bar value. 1>&2
ECHO:
GOTO usage
)
) ELSE IF "%PARAM%" == "--baz" (
SHIFT
SET BAZ=true
) ELSE IF "%PARAM%" == "" (
GOTO endargs
) ELSE (
ECHO Unrecognized option %1. 1>&2
ECHO:
GOTO usage
)
GOTO args
:endargs
ECHO Command: %CMD%
IF NOT "%FOO%" == "" (
ECHO Foo: %FOO%
)
IF NOT "%BAR%" == "" (
ECHO Bar: %BAR%
)
IF "%BAZ%" == "true" (
ECHO Baz
)
REM TODO do something with FOO, BAR, and/or BAZ
GOTO :eof
:usage
ECHO FooBar
ECHO Usage: foobar ^<command^> [--foo [^<fooval^>]] [--bar ^<barval^>] [--baz]
EXIT /B 1
Use SETLOCAL so that the variables don't escape into the calling environment.
Don't forget to initialize the variables SET FOO=, etc. in case someone defined them in the calling environment.
Use %~1 to remove quotes.
Use IF "%ARG%" == "" and not IF [%ARG%] == [] because [ and ] don't play will at all with values ending in a space.
Even if you SHIFT inside an IF block, the current args such as %~1 don't get updated because they are determined when the IF is parsed. You could use %~1 and %~2 inside the IF block, but it would be confusing because you had a SHIFT. You could put the SHIFT at the end of the block for clarity, but that might get lost and/or confuse people as well. So "capturing" %~1 and %~1 outside the block seems best.
You don't want to use a parameter in place of another parameter's optional value, so you have to check IF NOT "%ARG:~0,2%" == "--".
Be careful only to SHIFT when you use one of the parameters.
The duplicate code SET FOO=%DEFAULT_FOO% is regrettable, but the alternative would be to add an IF "%FOO%" == "" SET FOO=%DEFAULT_FOO% outside the IF NOT "%ARG%" == "" block. However because this is still inside the IF "%PARAM%" == "--foo" block, the %FOO% value would have been evaluated and set before you ever entered the block, so you would never detect that both the --foo parameter was present and also that the %FOO% value was missing.
Note that ECHO Missing bar value. 1>&2 sends the error message to stderr.
Want a blank line in a Windows batch file? You gotta use ECHO: or one of the variations.
To refer to a set variable in command line you would need to use %a% so for example:
set a=100
echo %a%
rem output = 100
Note: This works for Windows 7 pro.
For to use looping get all arguments and in pure batch:
Obs: For using without: ?*&|<>
#echo off && setlocal EnableDelayedExpansion
for %%Z in (%*)do set "_arg_=%%Z" && set/a "_cnt+=1+0" && (
call set "_arg_[!_cnt!]=!_arg_!" && for /l %%l in (!_cnt! 1 !_cnt!
)do echo/ The argument n:%%l is: !_arg_[%%l]!
)
goto :eof
Your code is ready to do something with the argument number where it needs, like...
#echo off && setlocal EnableDelayedExpansion
for %%Z in (%*)do set "_arg_=%%Z" && set/a "_cnt+=1+0" && call set "_arg_[!_cnt!]=!_arg_!"
fake-command /u !_arg_[1]! /p !_arg_[2]! > test-log.txt
Simple solution(even though question is old)
Test1.bat
echo off
echo "Batch started"
set arg1=%1
echo "arg1 is %arg1%"
echo on
pause
CallTest1.bat
call "C:\Temp\Test1.bat" pass123
output
YourLocalPath>call "C:\Temp\test.bat" pass123
YourLocalPath>echo off
"Batch started"
"arg1 is pass123"
YourLocalPath>pause
Press any key to continue . . .
Where YourLocalPath is current directory path.
To keep things simple store the command param in variable and use variable for comparison.
Its not just simple to write but its simple to maintain as well so if later some other person or you read your script after long period of time, it will be easy to understand and maintain.
To write code inline : see other answers.
Make a new batch file (example: openclass.bat) and write this line in the file:
java %~n1
Then place the batch file in, let's say, the system32 folder, go to your Java class file, right click, Properties, Open with..., then find your batch file, select it and that's that...
It works for me.
PS: I can't find a way to close the cmd window when I close the Java class. For now...
Paired arguments
If you prefer passing the arguments in a key-value pair you can use something like this:
#echo off
setlocal enableDelayedExpansion
::::: asigning arguments as a key-value pairs:::::::::::::
set counter=0
for %%# in (%*) do (
set /a counter=counter+1
set /a even=counter%%2
if !even! == 0 (
echo setting !prev! to %%#
set "!prev!=%%~#"
)
set "prev=%%~#"
)
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: showing the assignments
echo %one% %two% %three% %four% %five%
endlocal
And an example :
c:>argumentsDemo.bat one 1 "two" 2 three 3 four 4 "five" 5
1 2 3 4 5
Predefined variables
You can also set some environment variables in advance. It can be done by setting them in the console or setting them from my computer:
#echo off
if defined variable1 (
echo %variable1%
)
if defined variable2 (
echo %variable2%
)
and calling it like:
c:\>set variable1=1
c:\>set variable2=2
c:\>argumentsTest.bat
1
2
File with listed values
You can also point to a file where the needed values are preset.
If this is the script:
#echo off
setlocal
::::::::::
set "VALUES_FILE=E:\scripts\values.txt"
:::::::::::
for /f "usebackq eol=: tokens=* delims=" %%# in ("%VALUES_FILE%") do set "%%#"
echo %key1% %key2% %some_other_key%
endlocal
and values file is this:
:::: use EOL=: in the FOR loop to use it as a comment
key1=value1
key2=value2
:::: do not left spaces arround the =
:::: or at the begining of the line
some_other_key=something else
and_one_more=more
the output of calling it will be:
value1 value2 something else
Of course you can combine all approaches. Check also arguments syntax , shift
If you're worried about security/password theft (that led you to design this solution that takes login credentials at execution instead of static hard coding without the need for a database), then you could store the api or half the code of password decryption or decryption key in the program file, so at run time, user would type username/password in console to be hashed/decrypted before passed to program code for execution via set /p, if you're looking at user entering credentials at run time.
If you're running a script to run your program with various user/password, then command line args will suit you.
If you're making a test file to see the output/effects of different logins, then you could store all the logins in an encrypted file, to be passed as arg to test.cmd, unless you wanna sit at command line & type all the logins until finished.
The number of args that can be supplied is limited to total characters on command line. To overcome this limitation, the previous paragraph trick is a workaround without risking exposure of user passwords.