I have to make query to Apache Solr, like this:
name:ABCXYZ AND address:Ame*
I find that the the query with just name:ABCXYZ receives a quick response, with only 1 result. However, the response time is much higher for the query above, which includes a second field, address.
How can I tune Solr, or my query, so that it prioritizes the search for each field? In my case, this would mean to search name before address.
"name:ABCXYZ" gives an answer straight away, because the query is very specific and yields one distinct result. Normally you would expect a query like "name:ABCXYZ AND address:Ame*" to find all entries where name is ABCXYZ, then further find entries where address starts with "Ame".
The thing about Solr is that it is possible to configure it in such a way that even though "name:ABCXYZ AND address:Ame*" only yields one result, solr will continue to search for other entries that doesn't match the entire query string, but matches part of string.
This means that perhaps your search is too "kind"?
We use a query parameter named "mm" (Minimum Match) which you can set on your search handler in solrconfig.xml. This parameter specifies the minimum number of clauses that the query must match. So if mm=1 for instance, your query will find entries where name is "ABCXYZ', but also adresses that start with "Ame". Maybe you should look into this mm parameter? It's possible to set mm=100% which should force your search handler to find exact matches I imagine.
Edit: "mm" is for DisMax Query Parsers by the way.
search name before address
name:ABCXYZ^10 OR address:Ame^6
assigns name a boost of 10, and address a boost of 7.
These boost factors make matches in name much more significant than matches in address
Related
I'm attempting to query solr for documents, given a basic schema with the following field names, data types irrelevant:
I'm attempting to match documents that match at least one of the following:
occupation, name, age, gender but i want to OR them together
How do you OR together many terms, and enforce the document to match at least one?
This seems to be failing: +(name:Sarah age:24 occupation:doctor gender:male)
How do you convert a boolean expression into solr query syntax? I can't figure out the syntax with + and - and the default operator for OR.
Still I don't get your requirement but you just need to query like:
+(age:24 OR gender:male)
Or if you want data for multiple value in same field with OR condition like.
i.e. You get data of age:24 and age:25 both.
+(age:24 OR age:25 OR gender:male)
Then you can:
+(age:(24 25) OR gender:male)
If it is't your requirement, then let me know.
If you want to make it as simple as possible for the client, just go for the dismax[1] or edismax[2] query parser.
Specifically you can configure a request parameter called "qf" :
"The qf parameter introduces a list of fields, each of which is assigned a boost factor to increase or decrease that particular field’s importance in the query. For example, the query below:
qf=fieldOne^2.3 fieldTwo fieldThree^0.4
assigns fieldOne a boost of 2.3, leaves fieldTwo with the default boost (because no boost factor is specified), and fieldThree a boost of 0.4.
These boost factors make matches in fieldOne much more significant than matches in fieldTwo, which in turn are much more significant than matches in fieldThree." from the wiki
Then you can just pass a free text query, and it will be searched in the fields you specified, giving also different importance to each one, if necessary.
[1] https://lucene.apache.org/solr/guide/6_6/the-dismax-query-parser.html
[2] https://lucene.apache.org/solr/guide/6_6/the-extended-dismax-query-parser.html
I'm looking into the possibility of de-boosting a set of documents during
query time. In my application, when I search for e.g. "preferences", I want
to de-boost content tagged with ContentGroup:"Developer" or in other words,
push those content back in the order. Here's the catch. I've the following
weights on query fields and boost query on source
qf=text^6 title^15 IndexTerm^8
As you can see, title has a higher weight.
Now, a bunch of content tagged with ContentGroup:"Developer" consists of a
title like "Preferences.material" or "Preferences Property" or
"Preferences.graphics". The boost on title pushes these documents at the
top.
What I'm looking is to see if there's a way to deboost all documents that are
tagged with ContentGroup:"Developer" irrespective of the term occurrence is
text or title. I tried something like, but didn't make any difference.
Source:simplecontent^10 Source:Help^20 (-ContentGroup-local:("Developer"))^99
I'm using edismax query parser.
Any pointers will be appreciated.
Thanks,
Shamik
You're onto something with your last attempt, but you have to start with *:*, so that you actually have something to subtract the documents from. The resulting set of documents (those not matching your query) can then be boosted.
From the Solr Relevancy FAQ
How do I give a negative (or very low) boost to documents that match a query?
True negative boosts are not supported, but you can use a very "low" numeric boost value on query clauses. In general the problem that confuses people is that a "low" boost is still a boost, it can only improve the score of documents that match. For example, if you want to find all docs matching "foo" or "bar" but penalize the scores of documents matching "xxx" you might be tempted to try...
q = foo^100 bar^100 xxx^0.00001 # NOT WHAT YOU WANT
...but this will still help a document matching all three clauses score higher then a document matching only the first two. One way to fake a "negative boost" is to give a large boost to everything that does not match. For example...
q = foo^100 bar^100 (*:* -xxx)^999
NOTE: When using (e)dismax, people sometimes expect that specifying a pure negative query with a large boost in the "bq" param will work (since Solr automatically makes top level purely negative positive queries by adding an implicit ":" -- but this doesn't work with "bq", because of how queries specified via "bq" are added directly to the main query. You need to be explicit...
?defType=dismax&q=foo bar&bq=(*:* -xxx)^999
I implementing Solr search using an API. When I call it using the parameters as, "Chillout Lounge", it returns me the collection which are same/similar to the string "Chillout Lounge".
But when I search for "Chillout Lounge Box", it returns me results which don't have any of these three words.(in the DB there are values which have these 3 values, but they are not returned.)
According to me, Solr uses Fuzzy search, but when it is done it should return me some values, which will have at least one these value.
Or what could be the possible changes I should to my schema.XML, such that is would give me proper values.
First of all - "Fuzzy search" is a feature you'll have to ask for (by using ~ in standard Lucene query syntax).
If you're talking about regular searches, you can use q.op to select which operator to use. q.op=AND will make sure that all the terms match, while q.op=OR will make any document that contain at least one of the terms be returned. As long as you aren't using fq for this, the documents that match more terms should be scored higher (as the score will add up across multiple terms), and thus, be shown higher in the result set.
You can use the debug query feature in the web interface to see scores for each term for a document, and find out why the document was returned at all. If the document doesn't match any terms, it shouldn't be returned, unless you're asking for all documents to be returned.
Be aware that the analyzer chain defined for the field you're searching might affect what's considered a match and not.
You'll have to add a proper example to get a more detailed answer.
Suppose I want to create a recommendation system to suggest people you should connect with based off of certain attributes that I know about you and attributes I have about other people that are stored in a Solr index. Is it possible to query the index with a list of attributes (along with boosts for each attribute) and have Solr return scored results even if some of my fields return no matches? The way that I understand that Solr works is that if one of your fields doesn't contain a match in any documents found in your index, you get zero results for the entire query (even if other fields in the query matched) - is that right? What I would hope is that I could query the index and get a list of results back in order of a score given based on how many (and which) fields matched to something, even if some fields have no matches, for example:
Say that there are 2 people documents stored in the index as follows (figuratively):
Person 1:
Industry: Manufacturing
City: Oakland
Person 2:
Industry: Manufacturing
City: San Jose
And say that I perform a pseudo-Solr query that basically says "Search for everyone whose industry is equal to manufacturing and whose city is equal to Oakland". What I would like is to receive both results back in the result set, even though one of the "Persons" does not reside in Oakland. I just want that person to come back as a result with a lower score than Person1. Is this possible? What might a solr query look like to handle this? Assume that I have many more than 2 attributes for each person (so saying that I can use "And" and "Or" in my solr query isn't really feasible.. or is it?) Thanks in advance for your helpful input! (PS I'm using Solr 3.6)
You mention using the AND operator, which is likely your problem.
The default behavior of Lucene, and Solr, query syntax is exactly what you are asking for. A query like:
industry:manufacturing city:oakland
Will match either, with scoring preference on those that match both. See the lucene query syntax documentation
You can use the bq parameter (boost query) does not affect matching, but affects the scores only.
http://localhost:8983/solr/persons/select?q=industry:manufacturing&bq=City:Oakland^2
play with the boosting factor at the end to get the correct balance between matching score, and boosting score.
Is it possible to boost a document on the indexing stage depending on the field value?
I'm indexing a text field pulled from the database. I would like to boost results that are shorter over the longer ones. So the value of boost should depend on the length of the text field.
This is needed to alter the standard SOLR behavior that in my case tends to return documents with multiple matches first.
Considering I have a field that stores the length of the document, the equivalent in the query of what I need at indexing would be:
q={!boost b=sqrt(length)}text:abcd
Example:
I have two items in the DB:
ABCDEBCE
ABCD
I always want to get ABCD first for the 'BC' query even though the other item contains the search query twice.
The other solution to the problem would be ability to 'switch off' the feature that scores multiple matches higher at query time. Don't know if that is possible either...
Doing this at index time is important as the hardware I run the SOLR on is not too powerful and trying to boost on query time returns with OutOfMemory Exception. (Even If I could work around that increasing memory for java I prefer to be on the safe side and implement the index the most efficient way possible.)
Yes and no - but how you do it depends on how you're indexing your documents.
As far as I know there's no way of resolving this only on the solr server side at the moment.
If you're using the regular XML based interface to submit documents, let the code that generates the submitted XML add boost=".." values to the field or to the document depending on the length of the text field.
You can check upon DIH Special Commands which has a $docBoost command
$docBoost : Boost the current doc. The value can be a number or the
toString of a number
However, there seems no $fieldBoost Command.
For you case though, if you are using DefaultSimilarity, shorter fields are boosted higher then longer fields in the Score calculation.
You can surely implement your own Simiarity class with a changed TF (Term Frequency) and LengthNorm Calculation as your needs.