I have a short bash script to check to see if a Python program is running. The program writes out a PID file when it runs, so comparing this to the current list of running processes gives me what I need. But I'm having a problem with a variable being changed and then apparently changing back! Here's the script:
#!/bin/bash
# Test whether Home Server is currently running
PIDFILE=/tmp/montSvr.pid
isRunning=0
# does a pid file exist?
if [ -f "$PIDFILE" ]; then
# pid file exists
# now get contents of pid file
cat $PIDFILE | while read PID; do
if [ $PID != "" ]; then
PSGREP=$(ps -A | grep $PID | awk '{print $1}')
if [ -n "$PSGREP" ]; then
isRunning=1
echo "RUNNING: $isRunning"
fi
fi
done
fi
echo "Running: $isRunning"
exit $isRunning
The output I get, when the Python script is running, is:
RUNNING: 1
Running: 0
And the exit value of the bash script is 0. So isRunning is getting changed within all those if statements (ie, the code is performing as expected), but then somehow isRunning reverts to 0 again. Confused...
Commands after a pipe | are run in a subshell. Changes to variable values in a subshell do not propagate to the parent shell.
Solution: change your loop to
while read PID; do
# ...
done < $PIDFILE
It's the pipe that is the problem. Using a pipe in this way means that the loop runs in a sub-shell, with its own environment. Kill the cat, use this syntax instead:
while read PID; do
if [ $PID != "" ]; then
PSGREP=$(ps -A | grep $PID | awk '{print $1}')
if [ -n "$PSGREP" ]; then
isRunning=1
echo "RUNNING: $isRunning"
fi
fi
done < "$PIDFILE"
Related
Why isn't this bash array populating? I believe I've done them like this in the past. Echoing ${#XECOMMAND[#]} shows no data..
DIR=$1
TEMPFILE=/tmp/dir.tmp
ls -l $DIR | tail -n +2 | sed 's/\s\+/ /g' | cut -d" " -f5,9 > $TEMPFILE
i=0
cat $TEMPFILE | while read line ;do
if [[ $(echo $line | cut -d" " -f1) == 0 ]]; then
XECOMMAND[$i]="$(echo "$line" | cut -d" " -f2)"
(( i++ ))
fi
done
When you run the while loop like
somecommand | while read ...
then the while loop is executed in sub-shell, i.e. a different process than the main script. Thus, all variable assignments that happen in the loop, will not be reflected in the main process. The workaround is to use input redirection and/or command substitution, so that the loop executes in the current process. For example if you want to read from a file you do
while read ....
do
# do stuff
done < "$filename"
or if you wan't the output of a process you can do
while read ....
do
# do stuff
done < <(some command)
Finally, in bash 4.2 and above, you can set shopt -s lastpipe, which causes the last command in the pipeline to be executed in the current process.
I think you're trying to construct an array consisting of the names of all zero-length files and directories in $DIR. If so, you can do it like this:
mapfile -t ZERO_LENGTH < <(find "$DIR" -maxdepth 1 -size 0)
(Add -type f to the find command if you're only interested in regular files.)
This sort of solution is almost always better than trying to parse ls output.
The use of process substitution (< <(...)) rather than piping (... |) is important, because it means that the shell variable will be set in the current shell, not in an ephimeral subshell.
In the following program, if I set the variable $foo to the value 1 inside the first if statement, it works in the sense that its value is remembered after the if statement. However, when I set the same variable to the value 2 inside an if which is inside a while statement, it's forgotten after the while loop. It's behaving like I'm using some sort of copy of the variable $foo inside the while loop and I am modifying only that particular copy. Here's a complete test program:
#!/bin/bash
set -e
set -u
foo=0
bar="hello"
if [[ "$bar" == "hello" ]]
then
foo=1
echo "Setting \$foo to 1: $foo"
fi
echo "Variable \$foo after if statement: $foo"
lines="first line\nsecond line\nthird line"
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo "Value of \$foo in while loop body: $foo"
done
echo "Variable \$foo after while loop: $foo"
# Output:
# $ ./testbash.sh
# Setting $foo to 1: 1
# Variable $foo after if statement: 1
# Value of $foo in while loop body: 1
# Variable $foo updated to 2 inside if inside while loop
# Value of $foo in while loop body: 2
# Value of $foo in while loop body: 2
# Variable $foo after while loop: 1
# bash --version
# GNU bash, version 4.1.10(4)-release (i686-pc-cygwin)
echo -e $lines | while read line
...
done
The while loop is executed in a subshell. So any changes you do to the variable will not be available once the subshell exits.
Instead you can use a here string to re-write the while loop to be in the main shell process; only echo -e $lines will run in a subshell:
while read line
do
if [[ "$line" == "second line" ]]
then
foo=2
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo "Value of \$foo in while loop body: $foo"
done <<< "$(echo -e "$lines")"
You can get rid of the rather ugly echo in the here-string above by expanding the backslash sequences immediately when assigning lines. The $'...' form of quoting can be used there:
lines=$'first line\nsecond line\nthird line'
while read line; do
...
done <<< "$lines"
UPDATED#2
Explanation is in Blue Moons's answer.
Alternative solutions:
Eliminate echo
while read line; do
...
done <<EOT
first line
second line
third line
EOT
Add the echo inside the here-is-the-document
while read line; do
...
done <<EOT
$(echo -e $lines)
EOT
Run echo in background:
coproc echo -e $lines
while read -u ${COPROC[0]} line; do
...
done
Redirect to a file handle explicitly (Mind the space in < <!):
exec 3< <(echo -e $lines)
while read -u 3 line; do
...
done
Or just redirect to the stdin:
while read line; do
...
done < <(echo -e $lines)
And one for chepner (eliminating echo):
arr=("first line" "second line" "third line");
for((i=0;i<${#arr[*]};++i)) { line=${arr[i]};
...
}
Variable $lines can be converted to an array without starting a new sub-shell. The characters \ and n has to be converted to some character (e.g. a real new line character) and use the IFS (Internal Field Separator) variable to split the string into array elements. This can be done like:
lines="first line\nsecond line\nthird line"
echo "$lines"
OIFS="$IFS"
IFS=$'\n' arr=(${lines//\\n/$'\n'}) # Conversion
IFS="$OIFS"
echo "${arr[#]}", Length: ${#arr[*]}
set|grep ^arr
Result is
first line\nsecond line\nthird line
first line second line third line, Length: 3
arr=([0]="first line" [1]="second line" [2]="third line")
You are asking this bash FAQ. The answer also describes the general case of variables set in subshells created by pipes:
E4) If I pipe the output of a command into read variable, why
doesn't the output show up in $variable when the read command finishes?
This has to do with the parent-child relationship between Unix
processes. It affects all commands run in pipelines, not just
simple calls to read. For example, piping a command's output
into a while loop that repeatedly calls read will result in
the same behavior.
Each element of a pipeline, even a builtin or shell function,
runs in a separate process, a child of the shell running the
pipeline. A subprocess cannot affect its parent's environment.
When the read command sets the variable to the input, that
variable is set only in the subshell, not the parent shell. When
the subshell exits, the value of the variable is lost.
Many pipelines that end with read variable can be converted
into command substitutions, which will capture the output of
a specified command. The output can then be assigned to a
variable:
grep ^gnu /usr/lib/news/active | wc -l | read ngroup
can be converted into
ngroup=$(grep ^gnu /usr/lib/news/active | wc -l)
This does not, unfortunately, work to split the text among
multiple variables, as read does when given multiple variable
arguments. If you need to do this, you can either use the
command substitution above to read the output into a variable
and chop up the variable using the bash pattern removal
expansion operators or use some variant of the following
approach.
Say /usr/local/bin/ipaddr is the following shell script:
#! /bin/sh
host `hostname` | awk '/address/ {print $NF}'
Instead of using
/usr/local/bin/ipaddr | read A B C D
to break the local machine's IP address into separate octets, use
OIFS="$IFS"
IFS=.
set -- $(/usr/local/bin/ipaddr)
IFS="$OIFS"
A="$1" B="$2" C="$3" D="$4"
Beware, however, that this will change the shell's positional
parameters. If you need them, you should save them before doing
this.
This is the general approach -- in most cases you will not need to
set $IFS to a different value.
Some other user-supplied alternatives include:
read A B C D << HERE
$(IFS=.; echo $(/usr/local/bin/ipaddr))
HERE
and, where process substitution is available,
read A B C D < <(IFS=.; echo $(/usr/local/bin/ipaddr))
Hmmm... I would almost swear that this worked for the original Bourne shell, but don't have access to a running copy just now to check.
There is, however, a very trivial workaround to the problem.
Change the first line of the script from:
#!/bin/bash
to
#!/bin/ksh
Et voila! A read at the end of a pipeline works just fine, assuming you have the Korn shell installed.
This is an interesting question and touches on a very basic concept in Bourne shell and subshell. Here I provide a solution that is different from the previous solutions by doing some kind of filtering. I will give an example that may be useful in real life. This is a fragment for checking that downloaded files conform to a known checksum. The checksum file look like the following (Showing just 3 lines):
49174 36326 dna_align_feature.txt.gz
54757 1 dna.txt.gz
55409 9971 exon_transcript.txt.gz
The shell script:
#!/bin/sh
.....
failcnt=0 # this variable is only valid in the parent shell
#variable xx captures all the outputs from the while loop
xx=$(cat ${checkfile} | while read -r line; do
num1=$(echo $line | awk '{print $1}')
num2=$(echo $line | awk '{print $2}')
fname=$(echo $line | awk '{print $3}')
if [ -f "$fname" ]; then
res=$(sum $fname)
filegood=$(sum $fname | awk -v na=$num1 -v nb=$num2 -v fn=$fname '{ if (na == $1 && nb == $2) { print "TRUE"; } else { print "FALSE"; }}')
if [ "$filegood" = "FALSE" ]; then
failcnt=$(expr $failcnt + 1) # only in subshell
echo "$fname BAD $failcnt"
fi
fi
done | tail -1) # I am only interested in the final result
# you can capture a whole bunch of texts and do further filtering
failcnt=${xx#* BAD } # I am only interested in the number
# this variable is in the parent shell
echo failcnt $failcnt
if [ $failcnt -gt 0 ]; then
echo $failcnt files failed
else
echo download successful
fi
The parent and subshell communicate through the echo command. You can pick some easy to parse text for the parent shell. This method does not break your normal way of thinking, just that you have to do some post processing. You can use grep, sed, awk, and more for doing so.
I use stderr to store within a loop, and read from it outside.
Here var i is initially set and read inside the loop as 1.
# reading lines of content from 2 files concatenated
# inside loop: write value of var i to stderr (before iteration)
# outside: read var i from stderr, has last iterative value
f=/tmp/file1
g=/tmp/file2
i=1
cat $f $g | \
while read -r s;
do
echo $s > /dev/null; # some work
echo $i > 2
let i++
done;
read -r i < 2
echo $i
Or use the heredoc method to reduce the amount of code in a subshell.
Note the iterative i value can be read outside the while loop.
i=1
while read -r s;
do
echo $s > /dev/null
let i++
done <<EOT
$(cat $f $g)
EOT
let i--
echo $i
How about a very simple method
+call your while loop in a function
- set your value inside (nonsense, but shows the example)
- return your value inside
+capture your value outside
+set outside
+display outside
#!/bin/bash
# set -e
# set -u
# No idea why you need this, not using here
foo=0
bar="hello"
if [[ "$bar" == "hello" ]]
then
foo=1
echo "Setting \$foo to $foo"
fi
echo "Variable \$foo after if statement: $foo"
lines="first line\nsecond line\nthird line"
function my_while_loop
{
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2; return 2;
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2;
echo "Variable \$foo updated to $foo inside if inside while loop"
return 2;
fi
# Code below won't be executed since we returned from function in 'if' statement
# We aready reported the $foo var beint set to 2 anyway
echo "Value of \$foo in while loop body: $foo"
done
}
my_while_loop; foo="$?"
echo "Variable \$foo after while loop: $foo"
Output:
Setting $foo 1
Variable $foo after if statement: 1
Value of $foo in while loop body: 1
Variable $foo after while loop: 2
bash --version
GNU bash, version 3.2.51(1)-release (x86_64-apple-darwin13)
Copyright (C) 2007 Free Software Foundation, Inc.
Though this is an old question and asked several times, here's what I'm doing after hours fidgeting with here strings, and the only option that worked for me is to store the value in a file during while loop sub-shells and then retrieve it. Simple.
Use echo statement to store and cat statement to retrieve. And the bash user must chown the directory or have read-write chmod access.
#write to file
echo "1" > foo.txt
while condition; do
if (condition); then
#write again to file
echo "2" > foo.txt
fi
done
#read from file
echo "Value of \$foo in while loop body: $(cat foo.txt)"
Can anyone explain why the following doesn't work please?
list
the letter is d
the number is 4
the number is 2
the letter is g
script.sh
#!/bin/bash
cat "$1" | grep letter | array=($(awk '{print $4}'))
for i in "${array[#]}"
do
:
echo $i
done
If I run this bash script.sh list I expect the array to print d and g, but it doesn't. I think its because of how I am trying to set the array.
I think its because of how I am trying to set the array.
Each command in a pipeline | is run in a subshell - as a separate process. The parent process does not "see" variable changes from a child process.
Just:
array=($(grep letter "$1" | awk '{print $4}'))
or
array=($(awk '/letter/{print $4}' "$1"))
Run variable assignment in the parent shell.
You should assign the complete row of piped commands to a variable.
array=($(cat "$1" | grep letter | awk '{print $4}'))
The cat and grep command can be combined with awk, but why do you want an array?
I think you want the process each element in one loop, so first remove the double quotes:
for i in ${array[#]}
do
:
echo $i
done
Next, try to do this without an array
while read -r i; do
:
echo $i
done < <(awk '/letter/ {print $4}' "$1")
In the following program, if I set the variable $foo to the value 1 inside the first if statement, it works in the sense that its value is remembered after the if statement. However, when I set the same variable to the value 2 inside an if which is inside a while statement, it's forgotten after the while loop. It's behaving like I'm using some sort of copy of the variable $foo inside the while loop and I am modifying only that particular copy. Here's a complete test program:
#!/bin/bash
set -e
set -u
foo=0
bar="hello"
if [[ "$bar" == "hello" ]]
then
foo=1
echo "Setting \$foo to 1: $foo"
fi
echo "Variable \$foo after if statement: $foo"
lines="first line\nsecond line\nthird line"
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo "Value of \$foo in while loop body: $foo"
done
echo "Variable \$foo after while loop: $foo"
# Output:
# $ ./testbash.sh
# Setting $foo to 1: 1
# Variable $foo after if statement: 1
# Value of $foo in while loop body: 1
# Variable $foo updated to 2 inside if inside while loop
# Value of $foo in while loop body: 2
# Value of $foo in while loop body: 2
# Variable $foo after while loop: 1
# bash --version
# GNU bash, version 4.1.10(4)-release (i686-pc-cygwin)
echo -e $lines | while read line
...
done
The while loop is executed in a subshell. So any changes you do to the variable will not be available once the subshell exits.
Instead you can use a here string to re-write the while loop to be in the main shell process; only echo -e $lines will run in a subshell:
while read line
do
if [[ "$line" == "second line" ]]
then
foo=2
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo "Value of \$foo in while loop body: $foo"
done <<< "$(echo -e "$lines")"
You can get rid of the rather ugly echo in the here-string above by expanding the backslash sequences immediately when assigning lines. The $'...' form of quoting can be used there:
lines=$'first line\nsecond line\nthird line'
while read line; do
...
done <<< "$lines"
UPDATED#2
Explanation is in Blue Moons's answer.
Alternative solutions:
Eliminate echo
while read line; do
...
done <<EOT
first line
second line
third line
EOT
Add the echo inside the here-is-the-document
while read line; do
...
done <<EOT
$(echo -e $lines)
EOT
Run echo in background:
coproc echo -e $lines
while read -u ${COPROC[0]} line; do
...
done
Redirect to a file handle explicitly (Mind the space in < <!):
exec 3< <(echo -e $lines)
while read -u 3 line; do
...
done
Or just redirect to the stdin:
while read line; do
...
done < <(echo -e $lines)
And one for chepner (eliminating echo):
arr=("first line" "second line" "third line");
for((i=0;i<${#arr[*]};++i)) { line=${arr[i]};
...
}
Variable $lines can be converted to an array without starting a new sub-shell. The characters \ and n has to be converted to some character (e.g. a real new line character) and use the IFS (Internal Field Separator) variable to split the string into array elements. This can be done like:
lines="first line\nsecond line\nthird line"
echo "$lines"
OIFS="$IFS"
IFS=$'\n' arr=(${lines//\\n/$'\n'}) # Conversion
IFS="$OIFS"
echo "${arr[#]}", Length: ${#arr[*]}
set|grep ^arr
Result is
first line\nsecond line\nthird line
first line second line third line, Length: 3
arr=([0]="first line" [1]="second line" [2]="third line")
You are asking this bash FAQ. The answer also describes the general case of variables set in subshells created by pipes:
E4) If I pipe the output of a command into read variable, why
doesn't the output show up in $variable when the read command finishes?
This has to do with the parent-child relationship between Unix
processes. It affects all commands run in pipelines, not just
simple calls to read. For example, piping a command's output
into a while loop that repeatedly calls read will result in
the same behavior.
Each element of a pipeline, even a builtin or shell function,
runs in a separate process, a child of the shell running the
pipeline. A subprocess cannot affect its parent's environment.
When the read command sets the variable to the input, that
variable is set only in the subshell, not the parent shell. When
the subshell exits, the value of the variable is lost.
Many pipelines that end with read variable can be converted
into command substitutions, which will capture the output of
a specified command. The output can then be assigned to a
variable:
grep ^gnu /usr/lib/news/active | wc -l | read ngroup
can be converted into
ngroup=$(grep ^gnu /usr/lib/news/active | wc -l)
This does not, unfortunately, work to split the text among
multiple variables, as read does when given multiple variable
arguments. If you need to do this, you can either use the
command substitution above to read the output into a variable
and chop up the variable using the bash pattern removal
expansion operators or use some variant of the following
approach.
Say /usr/local/bin/ipaddr is the following shell script:
#! /bin/sh
host `hostname` | awk '/address/ {print $NF}'
Instead of using
/usr/local/bin/ipaddr | read A B C D
to break the local machine's IP address into separate octets, use
OIFS="$IFS"
IFS=.
set -- $(/usr/local/bin/ipaddr)
IFS="$OIFS"
A="$1" B="$2" C="$3" D="$4"
Beware, however, that this will change the shell's positional
parameters. If you need them, you should save them before doing
this.
This is the general approach -- in most cases you will not need to
set $IFS to a different value.
Some other user-supplied alternatives include:
read A B C D << HERE
$(IFS=.; echo $(/usr/local/bin/ipaddr))
HERE
and, where process substitution is available,
read A B C D < <(IFS=.; echo $(/usr/local/bin/ipaddr))
Hmmm... I would almost swear that this worked for the original Bourne shell, but don't have access to a running copy just now to check.
There is, however, a very trivial workaround to the problem.
Change the first line of the script from:
#!/bin/bash
to
#!/bin/ksh
Et voila! A read at the end of a pipeline works just fine, assuming you have the Korn shell installed.
This is an interesting question and touches on a very basic concept in Bourne shell and subshell. Here I provide a solution that is different from the previous solutions by doing some kind of filtering. I will give an example that may be useful in real life. This is a fragment for checking that downloaded files conform to a known checksum. The checksum file look like the following (Showing just 3 lines):
49174 36326 dna_align_feature.txt.gz
54757 1 dna.txt.gz
55409 9971 exon_transcript.txt.gz
The shell script:
#!/bin/sh
.....
failcnt=0 # this variable is only valid in the parent shell
#variable xx captures all the outputs from the while loop
xx=$(cat ${checkfile} | while read -r line; do
num1=$(echo $line | awk '{print $1}')
num2=$(echo $line | awk '{print $2}')
fname=$(echo $line | awk '{print $3}')
if [ -f "$fname" ]; then
res=$(sum $fname)
filegood=$(sum $fname | awk -v na=$num1 -v nb=$num2 -v fn=$fname '{ if (na == $1 && nb == $2) { print "TRUE"; } else { print "FALSE"; }}')
if [ "$filegood" = "FALSE" ]; then
failcnt=$(expr $failcnt + 1) # only in subshell
echo "$fname BAD $failcnt"
fi
fi
done | tail -1) # I am only interested in the final result
# you can capture a whole bunch of texts and do further filtering
failcnt=${xx#* BAD } # I am only interested in the number
# this variable is in the parent shell
echo failcnt $failcnt
if [ $failcnt -gt 0 ]; then
echo $failcnt files failed
else
echo download successful
fi
The parent and subshell communicate through the echo command. You can pick some easy to parse text for the parent shell. This method does not break your normal way of thinking, just that you have to do some post processing. You can use grep, sed, awk, and more for doing so.
I use stderr to store within a loop, and read from it outside.
Here var i is initially set and read inside the loop as 1.
# reading lines of content from 2 files concatenated
# inside loop: write value of var i to stderr (before iteration)
# outside: read var i from stderr, has last iterative value
f=/tmp/file1
g=/tmp/file2
i=1
cat $f $g | \
while read -r s;
do
echo $s > /dev/null; # some work
echo $i > 2
let i++
done;
read -r i < 2
echo $i
Or use the heredoc method to reduce the amount of code in a subshell.
Note the iterative i value can be read outside the while loop.
i=1
while read -r s;
do
echo $s > /dev/null
let i++
done <<EOT
$(cat $f $g)
EOT
let i--
echo $i
How about a very simple method
+call your while loop in a function
- set your value inside (nonsense, but shows the example)
- return your value inside
+capture your value outside
+set outside
+display outside
#!/bin/bash
# set -e
# set -u
# No idea why you need this, not using here
foo=0
bar="hello"
if [[ "$bar" == "hello" ]]
then
foo=1
echo "Setting \$foo to $foo"
fi
echo "Variable \$foo after if statement: $foo"
lines="first line\nsecond line\nthird line"
function my_while_loop
{
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2; return 2;
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2;
echo "Variable \$foo updated to $foo inside if inside while loop"
return 2;
fi
# Code below won't be executed since we returned from function in 'if' statement
# We aready reported the $foo var beint set to 2 anyway
echo "Value of \$foo in while loop body: $foo"
done
}
my_while_loop; foo="$?"
echo "Variable \$foo after while loop: $foo"
Output:
Setting $foo 1
Variable $foo after if statement: 1
Value of $foo in while loop body: 1
Variable $foo after while loop: 2
bash --version
GNU bash, version 3.2.51(1)-release (x86_64-apple-darwin13)
Copyright (C) 2007 Free Software Foundation, Inc.
Though this is an old question and asked several times, here's what I'm doing after hours fidgeting with here strings, and the only option that worked for me is to store the value in a file during while loop sub-shells and then retrieve it. Simple.
Use echo statement to store and cat statement to retrieve. And the bash user must chown the directory or have read-write chmod access.
#write to file
echo "1" > foo.txt
while condition; do
if (condition); then
#write again to file
echo "2" > foo.txt
fi
done
#read from file
echo "Value of \$foo in while loop body: $(cat foo.txt)"
BACKGROUND
What I'm trying to do here is read from a file that has PID information and separate the columns out into arrays. I have completed this part already, though I think is a better way than what I currently have (catting the same file 4 times).
pid=( $(cat /tmp/deadpidlist.log | awk -F " " '{print $1}') )
cpu=( $(cat /tmp/deadpidlist.log | awk -F " " '{print $2}') )
mem=( $(cat /tmp/deadpidlist.log | awk -F " " '{print $3}') )
ctime=( $(cat /tmp/deadpidlist.log | awk -F " " '{print $4}') )
WHAT AM I DOING? oh god
After that, I need to loop through each PID and if the pid fits the criteria I am looking for, put the corresponding cpu usage, memory usage and cpu time beside it in a file and then email that file out.
for i in "${pid[#]}"
do
...
if grep -Fxq "$pattern" /tmp/or_report.log; then
echo "$i" >> /tmp/deadpidwalking.log
I have the rest of my code up on a gist here: https://gist.github.com/sithtoast/e1654adab3cceb137ba2
Thanks!
A simple loop in bash should be sufficient. Note the rarely seen use of subscripted arrays as arguments to read.
declare -a pid cpu mem ctime
i=-1
while ((i++)); read "pid[i]" "cpu[i]" "mem[i]" "ctime[i]" and_the_rest; do
:
done < /tmp/deadpidlist.log
A more straightforward loop would be
declare -a pid cpu mem ctime
while read a b c d and_the_rest; do
pid+=("$a")
cpu+=("$b")
mem+=("$c")
ctime+=("$d")
done < /tmp/deadpidlist.log
Use associative arrays for cpu, mem, and ctime. Also, read the input all in one pass via the read builtin.
declare -a pid
declare -A cpu
declare -A mem
declare -A ctime
while read this_pid this_cpu this_mem this_ctime tail; do
pid[${#pid[*]}]=$this_pid
cpu[$this_pid]=$this_cpu
mem[$this_pid]=$this_mem
ctime[$this_pid]=$this_ctime
done < /tmp/deadpidlist.log
for i in "${pid[#]}" do;
# ...
echo $i cpu[$i] mem[$i] ctime[$i]
done
For the 1st part:
while read -r ipid icpu imem ictime icmd
do
pid+=($ipid)
cpu+=($icpu)
mem+=($imem)
ctime+=($ictime)
cmd+=($icmd)
done < /tmp/deadpidlist.log
Some small comments for the gist:
Use functions. You can save much typing redirecting the output from a function - like:
some() {
echo some
cat /some/file
}
#later
some >> /some/outfile
also, you can save many echo with grouping them into one heredoc
some2() {
cat - <<EOF
some output what want
can use $variables
$(date) #command substitutions too
EOF
}
If you don't want variable expansions, use the heredoc as <<'EOF'
Also, you can use
let countertwo++ #instead of countertwo=$((countertwo + 1))