I'm using SQL Server Management Studio to test some SQL queries, and the query below is said to have 'incorrect syntax near ','', which is the comma after 'image_uuid'. I read up on the syntax and I think I'm listing the columns correctly.
I need to move rows from one table to an archive table. I will be using this statement, then after drop the rows that I moved. If there's a cleaner way to do this, please explain what else I can do. Thanks!
INSERT INTO litmus_mailing_archive(image_uuid, server_id, list_id, mailing_id,
litmus_job_id, email_subject, test_email_message_id,
test_running, test_started, test_finished,
ended_with_error, images_purged, notification_email)
SELECT
(image_uuid, server_id, list_id, mailing_id,
litmus_job_id, email_subject, test_email_message_id,
test_running, test_started, test_finished,
ended_with_error, images_purged, notification_email)
FROM
litmus_mailing
WHERE
server_id = ?
AND list_id = ?
AND mailing_id = ?
AND test_running = 'false';
The question marks are just placeholders for the info. When I test it, I insert actual data that is in litmus_mailing.
Remove the parentheses from the select query:
SELECT (image_uuid, server_id, list_id, mailing_id,
litmus_job_id, email_subject, test_email_message_id,
test_running, test_started, test_finished, ended_with_error,
images_purged, notification_email)
Change it to this:
SELECT image_uuid, server_id, list_id, mailing_id,
litmus_job_id, email_subject, test_email_message_id,
test_running, test_started, test_finished,
ended_with_error, images_purged, notification_email
Remove the parentheses around the SELECT field list.
Related
I need to create calculate table for the report in PowerBI Desktop.
I know how to do that in t-sql but I am unable to interpret it to DAX.
So should I use t-sql and add this query using "Get Data"?
Or should I create calculate table using DAX?
Which one is more efficient?
select distinct PolicyNumber,
ReserveStatus,
case when ReserveStatus = 'Open' then 1 else 0 end as OpenStatus
from RockhillClaimsDataFeed_PBI
group by PolicyNumber,ReserveStatus
Result looks like that:
can somebody help?
This is achievable by creating a calculated table in Power BI, with similar syntax using SELECTCOLUMNS and DISTINCT.
RockhillClaimsSummary =
DISTINCT(
SELECTCOLUMNS(
RockhillClaims,
"PolicyNumber", RockhillClaims[PolicyNumber],
"ReserveStatus", RockhillClaims[ReserveStatus],
"OpenStatus", IF(RockhillClaims[ReserveStatus] = "Open", 1, 0)
)
)
Results:
When executing the following SQL query on Microsoft SQL Server 2008 :
SELECT
[ACCOUNT]
,[Mailto]
,[Site_addr_1]
,[Site_addr_2]
,[Site_addr_3]
,[State_Class]
,[Map_Facet]
,[Key_Map]
,[Neighborhood_Code]
,[Neighborhood_Group]
,[Econ_Area]
,[Yr_Impr]
,[Acreage]
,[Prior_Total_Market_Value]
,[Land_Value]
,[Improvement_Value]
,[Extra_features_Value]
,[Total_Appraised_Value]
,[Total_Building_Area]
,[Econ_Bld_Class]
,[LAND_USE_CODE]
FROM [Pdata].[dbo].[Real_acct]
LEFT JOIN [Pdata].[dbo].[Land]
ON (Real_acct.ACCOUNT = LAND.ACCOUNT)
I get the following error:
Msg 209, Level 16, State 1, Line 1
Ambiguous column name 'ACCOUNT'.
You are doing a join and it seems that both tables have the column ACCOUNT and sql server doesn't know if you want the column ACCOUNT from Real_acct or Land.
Try this:
SELECT
Real_acct.ACCOUNT -- or Land.ACCOUNT
,Mailto
,Site_addr_1
,Site_addr_2
,Site_addr_3
,State_Class
,Map_Facet
,Key_Map
,Neighborhood_Code
,Neighborhood_Group
,Econ_Area
,Yr_Impr
,Acreage
,Prior_Total_Market_Value
,Land_Value
,Improvement_Value
,Extra_features_Value
,Total_Appraised_Value
,Total_Building_Area
,Econ_Bld_Class
,LAND_USE_CODE
FROM [Pdata].[dbo].[Real_acct]
LEFT JOIN [Pdata].[dbo].[Land]
ON (Real_acct.ACCOUNT = LAND.ACCOUNT)
The very first column... the server doesn't know if you want Real_acct.ACCOUNT or LAND.ACCOUNT
#majidarif is completely correct.
The reason is that both tables have a column named "Account".
You need to specify which table you want the value returned from.
Even if they are the same you need to be specific.
I was trying to alter a view query with a subselect that looks like:
$subquery1 = (db_select('users_roles', 'r')
->where('r.uid = users_node__users_roles.uid and r.rid=10'));
$subquery1->addExpression('COUNT(r.rid)', 'rid');
$query->add_where(1,'1', $subquery1, '<>');
where $query is the main query.
But when i run the view, the query
...AND (1 <> SELECT COUNT(r.rid) AS rid FROM users_roles r WHERE
(r.uid = users_node__users_roles.uid and r.rid=10))...
if i put brackets for the sub select query it will working fine.
ie;
...AND (1 <> (SELECT COUNT(r.rid) AS rid FROM users_roles r WHERE
(r.uid = users_node__users_roles.uid and r.rid=10)))...
So my question is;
How can i put the subquery inside brackets?
sorry if my question is stupid?
Thanks in advance,
PREM
I had found the soln myself; put NOT IN instead of <>. NOT IN will make the value part inside the brackets
Im writing sql query and i have issue which i cannot fix.
I'm trying this:
CREATE TABLE a
AS
WITH cteCandidates (Miejscowosc, Ulica, NrDomu, KodPocztowy)
AS
(
SELECT Miejscowosc, Ulica, NrDomu, KodPocztowy
FROM Gimnazja
INTERSECT
SELECT Miejscowosc, Ulica, NrDomu, KodPocztowy
FROM SzkolyPodstawowe
)
Select
e.Lp as 'Gimnazja',
s.Lp as 'Szkoly Podstawowe'
FROM
Gimnazja AS e
INNER JOIN cteCandidates AS c
ON e.Miejscowosc = c.Miejscowosc AND e.Ulica = c.Ulica AND e.NrDomu = c.NrDomu AND e.KodPocztowy = c.KodPocztowy
INNER JOIN SzkolyPodstawowe s
ON s.Miejscowosc = e.Miejscowosc AND s.Ulica = e.Ulica AND s.NrDomu = e.NrDomu AND s.KodPocztowy = e.KodPocztowy
Order By 'Gimnazja'
And errors which i get:
Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'AS'.
Msg 319, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'with'. If this statement is a common table expression, an xmlnamespaces clause or a change tracking context clause, the previous statement must be terminated with a semicolon.
And i don't know why. I think that my query is proper but clearly not, and i don't understand why.
Perhaps you want:
WITH cteCandidates (...)
SELECT
e.Lp as 'Gimnazja',
s.Lp as 'Szkoly Podstawowe'
INTO a -- < -- table created here
FROM
Gimnazja AS e
INNER JOIN ...;
CREATE TABLE is used to define a table schema. The WITH keyword is used to define a CTE retrieval of data. These are two completely different operations.
If you need a table within your SQL look at http://msdn.microsoft.com/en-us/library/ms174979.aspx to see the syntax for defining it. You then may populate it with INSERT but that's highly unlikely to be from a CTE ( see below)
Usually with CTEs you don't need to insert the data into a table; in the statement immediately after it you can just use the data retrieved as the table has been temporarily defined and populated for you automatically.
A CTE can be used to define a VIEW - see Create view based on hierarchy / used of CTE for an example
Are you trying to create a view? Then it'd work...
I'm attempting to move a view between DB2 and SQL Server.
CREATE VIEW msu.bad_bus_cnty_st_mstr
AS
SELECT id,
bus_cnty_cntry_cd,
bus_st,
bus_zip
FROM summit.mstr
WHERE ( bus_cnty_cntry_cd, bus_st ) IN (SELECT cnty_cntry_cd,
st
FROM uhelp.cnty_cntry_cd
WHERE
cnty_cntry_descr LIKE '%invalid%');
The view works in DB2, but doesn't work with SQL Server because of the WHERE clause. Can I have a recommendation on how to rewrite this view to work with SQL Server?
It usually helps to define what "doesn't work" means (e.g. what error did you get) and also to specify the version of SQL Server you are using.
Unfortunately SQL Server doesn't support IN() with more than one clause. However you can re-write your view this way:
ALTER VIEW msu.bad_bus_cnty_st_mstr
AS
SELECT id,
bus_cnty_cntry_cd,
bus_st,
bus_zip
FROM summit.mstr AS mstr
WHERE EXISTS
(
SELECT 1
FROM uhelp.cnty_cntry_cd
WHERE cnty_cntry_descr LIKE '%invalid%'
AND cnty_cntry_cd = mstr.bus_cnty_cntry_cd
AND st = mstr.bus_st
);
one way
CREATE VIEW msu.bad_bus_cnty_st_mstr
AS
SELECT id,
bus_cnty_cntry_cd,
bus_st,
bus_zip
FROM summit.mstr m
WHERE EXISTS( SELECT 1 FROM uhelp.cnty_cntry_cd c
WHERE c.cnty_cntry_descr LIKE '%invalid%'
AND c.bus_cnty_cntry_cd = m.bus_cnty_cntry_cd
AND c.st = m.bus_st)