Whenever I compile my program, I get the error above.
If you have problems like that, first of all your TC folder put in to the C:..drive.
after completing installation open turbo c blue screen.
there is a OPTIONS > Directories ..in that you can see for option to set up path..
include directories..you can set path there now.. C:\TC\INCUDE
libraries Directories..you can set path there...C:\TC\LIB
if you want to store your output in BIN then you can set..C:\TC\BIN..otherwise you can set another path where you want to store your output..
Finally you can give OK and finished processes..
It will now work properly
Do this: Open your turboc2 folder you have tc.exe file inside, beside this file you find another file as named as ' tcinst.exe ' open it.
You will see the installation menu:
select as-- > Option > Directory > Include directory
Here you have to change the path of the directory to the path where your INCLUDE folder is located. Same way change the path to library directory also over restart your tc.exe.
Check if you have anything like those stdio.h file and other header files under INCLUDE folder and LIB folder. LIB contains some files. In my case, I had the same issue but both of these folder were blank.. good to know.
Steps:
Press: ALT + O + D (i.e. press ATL (keep pressed) and then O english character) and then D).
You'll see a popup window.
This window will have values for INCLUDE and LIB directories. The by default value for these two boxes in the popup window are: Drive leter where you installed TC... i.e. C:\ or D:\ or whatever followed by the path for INCLUDE and LIB folder. So, in my case,
INCLUDE box was set to: "C:\TC\INCLUDE" and LIB directory value box was set to: "C:\TC\LIB" (without quotes).
Steps to resolve:
Press ALT + C.
Set your current directory as C:\TC\BGI
Press ALT + O + D, and put ../INCLUDE and ../LIB in Include/Lib directory values.
and now... when you'll run your progress, you'll say thanks to me. I like the archduchess C fractal graphics that I'm running on DOS Turbo C right now. Lol.
Go to OPTIONS tab then select directories option then enter the particular path where your turbo c folder exists.
Enter the path in all the four message boxes and it would start working like it did in my case. I have TurboC3 and all the files were together in one common root folder.
Check your environment include path. The file is not in the locations pointed by that environment variable.
Well, I've been working backshift just spent about 6 hours trying to figure this out.
All of the above information led to this conclusion along with a single line in dos prompt screen, when I exited the editor, go to the dos prompt my C: drive is mounted.
I did a dir search and what I found was: the way in which I had mounted the C drive initially looked like this
mount c: /
and my dir did not list all files on the C drive only files within the turboc++ folder.
From that I had drawn the conclusion that my directories should look like:
c:\include
not
c:\turboc++\tc\include
or
c:\tc\include
The real problem was the nature in which I had mounted the drive.
Hope this helps someone.
b.mac
Since you did not mention which version of Turbo C this method below will cover both v2 and v3.
Click on 'Options', 'Directories', enter the proper location for the Include and Lib directories.
On most systems, you'd have to be trying fairly hard not to find '<stdio.h>', to the point where the first reaction is "is <stdio.h> installed". So, I'd be looking to see if the file exists in a plausible location. If not, then your installation of Turbo C is broken; reinstall. If you can find it, then you will have to establish why the compiler is not searching for it in the right place - what are the compiler options you've specified and where is the compiler searching for its headers (and why isn't it searching where the header is).
Make sure the folder with the standard header files is in the projects path.
I don't know where this is in Turbo C, but I would think there's a way of doing this.
First check whether the folder name is right or wrong since while you copying to one folder from other accidently it takes other folder address eg it take C instead of F So from OPTION>DIRECTORY change the folder name
Just Re install the turbo C++ from your Computer and install again in the Directory C:\TC\ Folder.
Again The Problem exists ,then change the directory from FILE>>CHANGE DIRECTORY to C:\TC\BIN\
Related
The Mingw binary installation instructions (such as these) tells me to change the PATH environment variable in Windows, in order to use the gcc/g++ etc commands anywhere. This might also be necessary for some programming IDE to find the compiler. Failing to do so yields errors such as this:
'gcc' is not recognized as an internal or external command, operable program or batch file.
How do I do this specifically in newer versions of Windows (10/11) and which path should I use?
Right-click "My Computer"/"This PC" from Windows explorer and pick properties. Alternatively Windows key + X and click "System". An "About" window appears.
Scroll down to "Advanced system settings" and click on it.
Click on the "Environment Variables" button.
Select "Path" in the window that appears and click the edit button.
Click on "Edit text" (not on "Edit"!).
Before modifying anything, I strongly recommend to copy the text there and save it in a text file for backup, so that you can restore the PATH in case of mistakes.
Write a semicolon ; at the end of the text there unless already present. Then after the semicolon add the full path to your Mingw installation's bin folder. For example ;c:\mingw_w64\bin.
Important: if you installed Mingw under for example C:\program files\mingw_w64, then the path must be ;C:\Program Files\mingw-w64\bin; without any surrounding " ... ". If using the "Edit" command available in this window, then the " ... " will get added and this may break the gcc path from working. (It just happened to me and that's the reason why I decided to write this Q&A.)
Click OK for each open window.
Reboot Windows.
Now you should be able to type gcc from the command line or use it from your programming IDE.
Alternatively, for CLI users:
Open cmd.
Type PATH.
Add the absolute path to the bin folder to it.
Place a semi-colon at the end.
Press enter.
Reboot.
And you're done.
Edit: For the full path to the bin folder:
cd your way to Mingw installation's bin folder, or alternatively, press windows key + e.
Open mingw -> bin.
Copy the full path present in the search bar.
As #Lundin said, you should first make a copy of the original PATH and save it, just in case something goes wrong.
my program seems to "see" only the .txt files which he creates with the fopen("file.txt","w") function. I changed the working directory and put added the file to the project, but if I create the file.txt the program can't see it. the only way is to edit the one he creates with the open function
You just have a problem concerning the current directory, it is not what you expect.
When you create "file.txt" it is created in the current directory because the path is not specified, so you can open it after because it is where the program look at by default.
{edit add}
You are under MacOS probably, if you start the program by hand from a shell like /Applications/......./prog the current directory is the current directory where you are in the shell, but if you start it through its icon etc it will depends on the installation directory
I am trying to use a MEL script to load ANIMATION.MA file that references CHARACTER_RIG.MA. The CHARACTER_RIG.MA and ANIMATION.MA files are produced by someone else and supplied to me. The ANIMATION.MA is looking for N:/Project/Maya//char/character/CHARACTER_RIG.MA
If I open ANIMATION.MA from Maya, or use the equivalent MEL command I always get prompted with:
"Reference File Not Found"
Reference File Not Found: N:/Project/Maya//char/character/CHARACTER_RIG.MA.
[Abort File Read] [Skip] [Browse...] [Retry]
If I tap browse, and select the CHARACTER_RIG.MA then it opens perfectly. I can see it created a reference in the Reference Editor that has the Unresolved Path (N:/...) , the Resolved Path (/my/path) and the namespace and the namespaceRN.
My question is, how do I do the equivalent of the "Browse..." from MEL? I tried pre-creating a reference, but it doesn't let me set the unresolved path, so when I load the ANIMATION.MA it keeps prompting in MAYA.
file -f -options "v=0" -typ "mayaAscii" -o "/Source/project/assets/anims/ANIMATION.MA"
If you know the directory where the file is, then you can use the dirmap command. The command dirmap allows you to remap directory structures if your disk configuration changes. So in this case it would look like:
dirmap -en true;
dirmap -m "N:/Project/Maya//char/character" "/my/path";
Possibly more manageable if you have lots of mappings to do especially when moving form a windows machine to a *nix one. However it is much more useful to define your project structure because then things just work when you move, tough this may not be the best of choice for shared assets.
I ended up finding several solutions:
Rename the RIG.MA file to match the filename in ANIM.MA (they were different in my case) and put it in one of the search or project folders that MAYA uses and it will automatically find it.
or
Programatically through code (or manually) edit the ANIM.MA file to remap the file/folder of the RIG.MA to where you want to load it from. Note: You
also need to remap any other files, such as textures. I did this with
perl -pi -e 's/\Qold-path\E/\Qnew-path\E/g' ANIMATION.MA
HTH someone else.
Quick and easy, File, Project, Set and select the folder where meshes or whatever it is.
This is what I get when trying to compile a simple hello world program with gcc.
c:\>gcc hello.c
hello.c:9:2: warning: no newline at end of file
C:\MinGW\bin\..\lib\gcc\mingw32\3.4.5\..\..\..\..\mingw32\bin\ld.exe: cannot open output file a.exe
: Permission denied
collect2: ld returned 1 exit status
Does it have something to do with windows 7 administrative privileges?
If the output file is being created but cannot be opened, where is it located?
Sorry if this is too much of a noobie question. I have been using Dev-C++ for compiling my source code till now. I tried googling around the error but all i could find was the file is already open, but there is no mention of such exe in task manager.
Edit: Also the file is located at C:\hello.c
Will i be able to do it if i place it in other drive?
When i place the file at D:\ and try change it to any other drive using cd d:\ doesn't change the drive.
Yes it is a permissions issue, you must not be running the command line window in Admin mode.
Don't work in C:\
Copy the file to a folder under my documents, or a subfolder of C:, or another drive.
Or, run the console in Administrator mode if you really want to work in the root of C:
To switch to D: while in C:, just type D: (you use CD only when already on the correct drive)
The most common case is that your program may still be running in the background, possibly hanged on an endless loop. You can try searching for the process in the process list (press Alt+Ctrl+Del) and killing it.
I found problem was hosting src under google drive;.. jesus super star chuck norris van damm .. 3h trying to figure out this one (vs code + mingw64).
Solution:
Just moved the folder with my cpp source file outside google drive managed folder tree (was on f:\gd) so moved my source into f:\dev.
The g++.exe-command in the build-log in the CodeBlocks-IDE shows the command
with an additional path: C:\MinGW\lib, which is wrong.
If you copy the command to a cmd-window (in the directory of your Project)
without the C:\MinGW\lib the compiler works. When you copy the command as shown in CodeBlocks-Buil-log it fails, with the same message in the cmd-window.
Have a look at the Settings > Compiler > Search Directories > Linker. You've got to delete the
C:\MinGW\lib there, but the bug is, that it is not deleted if you do it once.
You've got to repeat it and then it works.
Whenever I compile my program, I get the error above.
If you have problems like that, first of all your TC folder put in to the C:..drive.
after completing installation open turbo c blue screen.
there is a OPTIONS > Directories ..in that you can see for option to set up path..
include directories..you can set path there now.. C:\TC\INCUDE
libraries Directories..you can set path there...C:\TC\LIB
if you want to store your output in BIN then you can set..C:\TC\BIN..otherwise you can set another path where you want to store your output..
Finally you can give OK and finished processes..
It will now work properly
Do this: Open your turboc2 folder you have tc.exe file inside, beside this file you find another file as named as ' tcinst.exe ' open it.
You will see the installation menu:
select as-- > Option > Directory > Include directory
Here you have to change the path of the directory to the path where your INCLUDE folder is located. Same way change the path to library directory also over restart your tc.exe.
Check if you have anything like those stdio.h file and other header files under INCLUDE folder and LIB folder. LIB contains some files. In my case, I had the same issue but both of these folder were blank.. good to know.
Steps:
Press: ALT + O + D (i.e. press ATL (keep pressed) and then O english character) and then D).
You'll see a popup window.
This window will have values for INCLUDE and LIB directories. The by default value for these two boxes in the popup window are: Drive leter where you installed TC... i.e. C:\ or D:\ or whatever followed by the path for INCLUDE and LIB folder. So, in my case,
INCLUDE box was set to: "C:\TC\INCLUDE" and LIB directory value box was set to: "C:\TC\LIB" (without quotes).
Steps to resolve:
Press ALT + C.
Set your current directory as C:\TC\BGI
Press ALT + O + D, and put ../INCLUDE and ../LIB in Include/Lib directory values.
and now... when you'll run your progress, you'll say thanks to me. I like the archduchess C fractal graphics that I'm running on DOS Turbo C right now. Lol.
Go to OPTIONS tab then select directories option then enter the particular path where your turbo c folder exists.
Enter the path in all the four message boxes and it would start working like it did in my case. I have TurboC3 and all the files were together in one common root folder.
Check your environment include path. The file is not in the locations pointed by that environment variable.
Well, I've been working backshift just spent about 6 hours trying to figure this out.
All of the above information led to this conclusion along with a single line in dos prompt screen, when I exited the editor, go to the dos prompt my C: drive is mounted.
I did a dir search and what I found was: the way in which I had mounted the C drive initially looked like this
mount c: /
and my dir did not list all files on the C drive only files within the turboc++ folder.
From that I had drawn the conclusion that my directories should look like:
c:\include
not
c:\turboc++\tc\include
or
c:\tc\include
The real problem was the nature in which I had mounted the drive.
Hope this helps someone.
b.mac
Since you did not mention which version of Turbo C this method below will cover both v2 and v3.
Click on 'Options', 'Directories', enter the proper location for the Include and Lib directories.
On most systems, you'd have to be trying fairly hard not to find '<stdio.h>', to the point where the first reaction is "is <stdio.h> installed". So, I'd be looking to see if the file exists in a plausible location. If not, then your installation of Turbo C is broken; reinstall. If you can find it, then you will have to establish why the compiler is not searching for it in the right place - what are the compiler options you've specified and where is the compiler searching for its headers (and why isn't it searching where the header is).
Make sure the folder with the standard header files is in the projects path.
I don't know where this is in Turbo C, but I would think there's a way of doing this.
First check whether the folder name is right or wrong since while you copying to one folder from other accidently it takes other folder address eg it take C instead of F So from OPTION>DIRECTORY change the folder name
Just Re install the turbo C++ from your Computer and install again in the Directory C:\TC\ Folder.
Again The Problem exists ,then change the directory from FILE>>CHANGE DIRECTORY to C:\TC\BIN\