I am trying to use C code to access wpa_supplicant in an ARM embedded system running linux. After searching, I realise that I could use wpa_supplicant control interface. I try to open a connection using wpa_ctrl_open(), and resulted in "Connection refused" error:
Failed to connect to wpa_supplicant global interface: /var/run/wpa_supplicant error: Connection refused
The code I am using to test:
#include <stdio.h>
#include <string.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/sockios.h>
#include <netinet/if_ether.h>
#include <net/if.h>
#include <sys/socket.h>
#include <sys/un.h>
#include "includes.h"
#ifdef CONFIG_CTRL_IFACE_UNIX
#include <dirent.h>
#endif /* CONFIG_CTRL_IFACE_UNIX */
#include "wpa_ctrl.h"
#include "common.h"
struct wpa_ctrl {
int s;
#ifdef CONFIG_CTRL_IFACE_UDP
struct sockaddr_in local;
struct sockaddr_in dest;
#else // CONFIG_CTRL_IFACE_UDP
struct sockaddr_un local;
struct sockaddr_un dest;
#endif // CONFIG_CTRL_IFACE_UDP
};
static struct wpa_ctrl *ctrl_conn;
int main(int argc,char **argv)
{
const char *global = "/var/run/wpa_supplicant";
ctrl_conn = wpa_ctrl_open(global);
if (ctrl_conn == NULL)
{
fprintf(stderr, "Failed to connect to wpa_supplicant "
"global interface: %s error: %s\n",global,strerror(errno));
return -1;
}
else
{
printf("Success\n");
}
return 0;
}
After tracing the code in wpa_ctrl.c, I found the problem is on the following IF condition, inside wpa_ctrl_open2() function:
if (connect(ctrl->s, (struct sockaddr *) &ctrl->dest,sizeof(ctrl->dest)) < 0)
I do not know what is the problem and how I can solve it.
On the same machine, I tried to run wpa_cli and it can access wpa_supplicant perfectly.
I used the following command to compile:
gcc -o test_wpa main.c wpa_ctrl.c os_unix.c -DCONFIG_BACKEND_FILE -DCONFIG_IEEE80211W -DCONFIG_DRIVER_WEXT -DCONFIG_WIRELESS_EXTENSION -DCONFIG_DRIVER_NL80211 -DCONFIG_LIBNL20 -DEAP_PSK -DIEEE8021X_EAPOL -DCONFIG_SHA256 -DCONFIG_CTRL_IFACE -DCONFIG_CTRL_IFACE_UNIX -DCONFIG_SME -lrt
wpa_supplicant code (including wpa_ctrl.c & os_unix.c) can be download at here:
http://w1.fi/releases/wpa_supplicant-2.5.tar.gz
Many thanks in advance!
I found the way to solve the problem, add "wlan0" after the path:
const char *global = "/var/run/wpa_supplicant/wlan0";
ctrl_conn = wpa_ctrl_open(global);
Related
This code works perfectly on Linux, but returns the error "gethostbyname: Undefined error: 0" in the terminal. I have also tried other codes from the net, but all of them either return some error during compilation or display the IPv4 address as 0.0.0.0. Is there anything I can do to make this work?
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#include <netdb.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
void checkHostName(int hostname)
{
if (hostname == -1) {
perror("gethostname");
exit(1);
}
}
void checkHostEntry(struct hostent* hostentry)
{
if (hostentry == NULL) {
perror("gethostbyname");
exit(1);
}
}
void checkIPbuffer(char* IPbuffer)
{
if (NULL == IPbuffer) {
perror("inet_ntoa");
exit(1);
}
}
int main()
{
char hostbuffer[256];
char* IPbuffer;
struct hostent* host_entry;
int hostname;
hostname = gethostname(hostbuffer, sizeof(hostbuffer));
checkHostName(hostname);
host_entry = gethostbyname(hostbuffer);
checkHostEntry(host_entry);
IPbuffer = inet_ntoa(*((struct in_addr*) host_entry->h_addr_list[0]));
printf("Hostname: %s\n", hostbuffer);
printf("Host IP: %s", IPbuffer);
return 0;
}
I'm trying to write a linux driver. The kernel version is 2.4.18 and the distribution is Red Hat linux 8.0.
The code of my driver is:
#define LINUX
#include <linux/kernel.h> /* We're doing kernel work */
#include <linux/module.h> /* Specifically, a module */
#include <linux/fs.h>
#include <asm-i386/semaphore.h>
#include "rng.h"
#include <linux/random.h>
#include <linux/slab.h>
#define DEVICE_NAME "rng"
#define BUF_LEN 80
static int major;
int init_module();
void cleanup_module();
static int device_open(struct inode *, struct file *);
static int device_release(struct inode *, struct file *);
struct file_operations my_fops = {
open: device_open,
release: device_release,
};
/* Init and Cleanup */
int init_module() {
SET_MODULE_OWNER(&my_fops);
major = register_chrdev(0, DEVICE_NAME, &my_fops);
return 0;
}
void cleanup_module() {
int ret = unregister_chrdev(major, DEVICE_NAME);
if (ret < 0)
printk("Error in unregister_chrdev: %d\n", ret);
}
static int device_open(struct inode *inode, struct file *file) {
file->f_op=&my_fops;
return 1;
}
static int device_release(struct inode *inode, struct file *file) {
return 0;
}
And the code I'm using in order to test my driver is:
#include <sys/types.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
int openTest() {
int game1 = open("/dev/game1", O_RDONLY); // SEGMENTATION FAULT
int retValue=1;
close(game1);
return retValue;
}
int main() {
int res;
if (openTest() < 1) {
fprintf(stderr, "open didnt work\n");
return -1;
}
fprintf(stderr, "everything works :)\n");
return 0;
}
In the code above, I'm getting a segmentation fault when I'm trying to open the device. Can somebody explain to me why I'm getting this segmentation fault? I really don't understand.
Thanks a lot!
In Linux kernel land, it is convention to return a 0 (zero) when there are no errors. Your device_open() routine is hardcoded to return a 1 (one), which may be causing your segfault.
This Linux Device Drivers book may be helpful to you. The linked edition is written for kernel 2.0.x - 2.4.x, so the information should be appropriate for the dusty and ancient kernel you are using.
This line seems to be wrong file->f_op=&my_fops;
Basically when writing a linux driver operations are setup at build time itself.
I am relatively new in C programming, and especially in socket programming, but I have spent much time trying to help myself on this question and haven't found anything, I hope somebody will be able to help. So here is the problem (I write only the line where I have the problem)
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <sys/time.h>
#include <errno.h>
#include <unistd.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netinet/tcp.h>
#include <arpa/inet.h>
typedef int SOCKET;
static const int SOCKET_ERROR = -1;
/*Variables initialisation*/
int32_t filtersize1=0;
int32_t filtersize2=0;
SOCKET sock;
unsigned int bytes_sent = 0;
int success = TRUE;
int erreur2=0;
int erreur3=0;
static char const *DEF_HOST_IP = "132.166.142.227"/* default target host address*/
static const unsigned short DEF_HOST_PORT = 15000; /* default target port */
struct sockaddr_in hostinfo;
/* Store TCP/IP parameters */
hostinfo.sin_family = AF_INET;
hostinfo.sin_addr.s_addr = inet_addr( *DEF_HOST_IP);
hostinfo.sin_port = htons( DEF_HOST_PORT);
When I compile I get the error " expected constructor, destructor, or type conversion before '.' token", and that on the line where I fill the sockadrr_in structure (named hostinfo) My guess would be that the code doesn't recognize the sockadrr_in as a structure type, or doesn't recognize the type stored in this structure, but I already used this code on another machine and it was working. I precise I already tried setting the structure to zero before and I have the same problem. If anybody had a solution this would really help me because I don't know what to try anymore. Thanks in advance.
You can initialize structs in the following fashion:
// compiles
struct sockaddr_in hostinfo = {
.sin_family = AF_INET
};
But as soon as you add a function call, it will no longer work because the elements are no longer constant. To the compiler, adding this function call means that the element is not constant, so it doesn't know what to store for the global object.
// does not compile
struct sockaddr_in hostinfo = {
.sin_family = AF_INET,
.sin_port = htons(DEF_HOST_PORT),
};
Also, you have a missing semicolon in the line:
static char const *DEF_HOST_IP = "132.166.142.227"
Going off of what #klas-lindback said, you should be initializing hostinfo as part of a function somewhere.
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <sys/time.h>
#include <errno.h>
#include <unistd.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netinet/tcp.h>
#include <arpa/inet.h>
static char const *DEF_HOST_IP = "132.166.142.227"; /* default target host address*/
static const unsigned short DEF_HOST_PORT = 15000; /* default target port */
struct sockaddr_in hostinfo;
void setup_hostinfo()
{
/* Store TCP/IP parameters */
hostinfo.sin_family = AF_INET;
hostinfo.sin_addr.s_addr = inet_addr(DEF_HOST_IP);
hostinfo.sin_port = htons(DEF_HOST_PORT);
}
int main(void) {
/* setup our hostinfo */
setup_hostinfo();
return 0;
}
Only declarations are allowed outside a function body.
The lines:
/* Store TCP/IP parameters */
hostinfo.sin_family = AF_INET;
hostinfo.sin_addr.s_addr = inet_addr( *DEF_HOST_IP);
hostinfo.sin_port = htons( DEF_HOST_PORT);
are not declarations and must be put inside a function.
i'm writing a server/client c program based on AX.25 protocol.
The server creating the socket, binding Successfully and listening for coming connections.
the client running in a different thread but fails on connect with " No route to host"
Server code
#include <sys/socket.h>
#include <netax25/ax25.h>
#include <netax25/axlib.h>
#include <netax25/axconfig.h>
#include <stdio.h>
#include <arpa/inet.h>
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <signal.h>
#include <syslog.h>
#include <sys/types.h>
#include <linux/socket.h>
#include <stdlib.h>
#include <sys/un.h>
#include <string.h>
#include <errno.h>
int main(int argc,char **argv,char **envp) {
int ax25_socket = -1;
unsigned char buffer[512];
struct full_sockaddr_ax25 addr, axconnect ;
char *port ="3";// sm0 port number:3
char *call = "OH2BNS-8";// sm0 callsign
bzero((char *) &addr, sizeof(struct full_sockaddr_ax25));
addr.fsa_ax25.sax25_family = AF_AX25;
addr.fsa_ax25.sax25_ndigis = 1;
if (ax25_config_load_ports() == 0) {
printf( "Problem with axports file");
//return -1;
}
char* ax25port = (char*) ax25_config_get_addr(port);
ax25_aton_entry( call, addr.fsa_ax25.sax25_call.ax25_call);
ax25_aton_entry( ax25port, addr.fsa_digipeater[0].ax25_call);
ax25_socket = socket(AF_AX25, SOCK_SEQPACKET, 0);
if (ax25_socket < -1)
printf( "error in create socket");
if (bind(ax25_socket, (struct sockaddr *)&addr, sizeof(struct full_sockaddr_ax25)) < 0) {
perror("bind--");
return -1;
}
if(listen(ax25_socket,2) != 0)
{
printf("cannot listen on socket!\n");
close(ax25_socket);
return 0;
}
puts("listening");
//bzero((char *) &axconnect, sizeof(struct full_sockaddr_ax25));
int len =sizeof(struct full_sockaddr_ax25);
int temp_sock_desc = accept(ax25_socket, (struct sockaddr*)&axconnect, &len);
if (temp_sock_desc == -1)
{
printf("cannot accept client!\n");
close(ax25_socket);
return 0;
}
return 0;
}
Client code
#include <sys/socket.h>
#include <netax25/ax25.h>
#include <netax25/axlib.h>
#include <netax25/axconfig.h>
#include <stdio.h>
#include <arpa/inet.h>
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <signal.h>
#include <syslog.h>
#include <sys/types.h>
#include <linux/socket.h>
#include <stdlib.h>
#include <sys/un.h>
#include <string.h>
#include <errno.h>
int main(int argc, char *argv[])
{
int ax25_socket = -1;
unsigned char buffer[512];
struct full_sockaddr_ax25 axconnect ;
char *port ="3";// sm0 port number:3
char *call ="OH2BNS-8";// sm0 callsign
bzero((char *) &axconnect, sizeof(struct full_sockaddr_ax25));
axconnect.fsa_ax25.sax25_family = AF_AX25;
axconnect.fsa_ax25.sax25_ndigis = 1;
if (ax25_config_load_ports() == 0) {
printf( "Problem with axports file");
//return -1;
}
char* ax25port = (char*) ax25_config_get_addr(port);
ax25_aton_entry( call, axconnect.fsa_ax25.sax25_call.ax25_call);
ax25_aton_entry( ax25port, axconnect.fsa_digipeater[0].ax25_call);
ax25_socket = socket(AF_AX25, SOCK_SEQPACKET, 0);
if (ax25_socket < -1)
printf( "error in create socket");
if (connect(ax25_socket, (struct sockaddr *)&axconnect, sizeof(struct full_sockaddr_ax25)) != 0) {
perror("--");
switch (errno) {
case ECONNREFUSED:
printf("*** Connection refused\r");
break;
case ENETUNREACH:
printf("*** No known route\r");
break;
case EINTR:
printf("*** Connection timed out\r");
break;
default:
printf("ERROR: cannot connect to AX.25 callsign\r");
break;
}
close(ax25_socket);
}
printf("Connected!!\r");
int n = write(ax25_socket,"Message!!!!",18);
if(n = -1)
{
perror("write--");
}
return 0;
}
Simply put, a " No route to host"" would mean that there is no route for the server IP address in the client's routing table. Are you able to ping the server's IP address? Most likely you should not be able to and ping should say that the server is not reachable. If so, then this error has nothing to do with your program, you are probably running into a connectivity issue.
Can you find the entry for your server in the output of "route -n". If there is none, then you should check for a bigger prefix for the subnet of the server. If that also is not present, then you should confirm that you have a default route setup.
To further confirm, I would do the following two tests. First, what happens if you try to run the client/server on the same box? Second, what happens if you try to run the client/server on two boxes (present in the same subnet) and on the same LAN? If you do not see this issue and your application works just fine, then this should confirm that you are running into a connectivity issue.
I know this is an old question, but I would suspect a problem with ax25port - should be something like YOURCALL-0 where YOURCALL matches the HWaddr of an existing ax25 port ( try /sbin/ifconfig | fgrep AX.25
How can I get the IPv4 address of an interface on Linux from C code?
For example, I'd like to get the IP address (if any) assigned to eth0.
Try this:
#include <stdio.h>
#include <unistd.h>
#include <string.h> /* for strncpy */
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <netinet/in.h>
#include <net/if.h>
#include <arpa/inet.h>
int
main()
{
int fd;
struct ifreq ifr;
fd = socket(AF_INET, SOCK_DGRAM, 0);
/* I want to get an IPv4 IP address */
ifr.ifr_addr.sa_family = AF_INET;
/* I want IP address attached to "eth0" */
strncpy(ifr.ifr_name, "eth0", IFNAMSIZ-1);
ioctl(fd, SIOCGIFADDR, &ifr);
close(fd);
/* display result */
printf("%s\n", inet_ntoa(((struct sockaddr_in *)&ifr.ifr_addr)->sin_addr));
return 0;
}
The code sample is taken from here.
In addition to the ioctl() method Filip demonstrated you can use getifaddrs(). There is an example program at the bottom of the man page.
If you're looking for an address (IPv4) of the specific interface say wlan0 then
try this code which uses getifaddrs():
#include <arpa/inet.h>
#include <sys/socket.h>
#include <netdb.h>
#include <ifaddrs.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
int main(int argc, char *argv[])
{
struct ifaddrs *ifaddr, *ifa;
int family, s;
char host[NI_MAXHOST];
if (getifaddrs(&ifaddr) == -1)
{
perror("getifaddrs");
exit(EXIT_FAILURE);
}
for (ifa = ifaddr; ifa != NULL; ifa = ifa->ifa_next)
{
if (ifa->ifa_addr == NULL)
continue;
s=getnameinfo(ifa->ifa_addr,sizeof(struct sockaddr_in),host, NI_MAXHOST, NULL, 0, NI_NUMERICHOST);
if((strcmp(ifa->ifa_name,"wlan0")==0)&&(ifa->ifa_addr->sa_family==AF_INET))
{
if (s != 0)
{
printf("getnameinfo() failed: %s\n", gai_strerror(s));
exit(EXIT_FAILURE);
}
printf("\tInterface : <%s>\n",ifa->ifa_name );
printf("\t Address : <%s>\n", host);
}
}
freeifaddrs(ifaddr);
exit(EXIT_SUCCESS);
}
You can replace wlan0 with eth0 for ethernet and lo for local loopback.
The structure and detailed explanations of the data structures
used could be found here.
To know more about linked list in C this page will be a good starting point.
My 2 cents: the same code works even if iOS:
#include <arpa/inet.h>
#include <sys/socket.h>
#include <netdb.h>
#include <ifaddrs.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#import "ViewController.h"
#interface ViewController ()
#end
#implementation ViewController
- (void)viewDidLoad {
[super viewDidLoad];
// Do any additional setup after loading the view, typically from a nib.
showIP();
}
void showIP()
{
struct ifaddrs *ifaddr, *ifa;
int family, s;
char host[NI_MAXHOST];
if (getifaddrs(&ifaddr) == -1)
{
perror("getifaddrs");
exit(EXIT_FAILURE);
}
for (ifa = ifaddr; ifa != NULL; ifa = ifa->ifa_next)
{
if (ifa->ifa_addr == NULL)
continue;
s=getnameinfo(ifa->ifa_addr,sizeof(struct sockaddr_in),host, NI_MAXHOST, NULL, 0, NI_NUMERICHOST);
if( /*(strcmp(ifa->ifa_name,"wlan0")==0)&&( */ ifa->ifa_addr->sa_family==AF_INET) // )
{
if (s != 0)
{
printf("getnameinfo() failed: %s\n", gai_strerror(s));
exit(EXIT_FAILURE);
}
printf("\tInterface : <%s>\n",ifa->ifa_name );
printf("\t Address : <%s>\n", host);
}
}
freeifaddrs(ifaddr);
}
#end
I simply removed the test against wlan0 to see data.
ps You can remove "family"
I have been in the same issue recently, and this is the code I made up and it works. Make sure to use the name of the network interface, exactly as you have it (could be "eth0" or else).
gotta check if ifconfigcommand beforehand to get the interface name and use it in C.
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <net/if.h>
#include <unistd.h>
#include <linux/if.h>
#include <errno.h>
#include <ifaddrs.h>
#include <netinet/in.h>
#include <arpa/inet.h>
void extract_ipaddress()
{
//create an ifreq struct for passing data in and out of ioctl
struct ifreq my_struct;
//declare and define the variable containing the name of the interface
char *interface_name="enp0s3"; //a very frequent interface name is "eth0";
//the ifreq structure should initially contains the name of the interface to be queried. Which should be copied into the ifr_name field.
//Since this is a fixed length buffer, one should ensure that the name does not cause an overrun
size_t interface_name_len=strlen(interface_name);
if(interface_name_len<sizeof(my_struct.ifr_name))
{
memcpy(my_struct.ifr_name,interface_name,interface_name_len);
my_struct.ifr_name[interface_name_len]=0;
}
else
{
perror("Copy name of interface to ifreq struct");
printf("The name you provided for the interface is too long...\n");
}
//provide an open socket descriptor with the address family AF_INET
/* ***************************************************************
* All ioctl call needs a file descriptor to act on. In the case of SIOCGIFADDR this must refer to a socket file descriptor. This socket must be in the address family that you wish to obtain (AF_INET for IPv4)
* ***************************************************************
*/
int file_descriptor=socket(AF_INET, SOCK_DGRAM,0);
if(file_descriptor==-1)
{
perror("Socket file descriptor");
printf("The construction of the socket file descriptor was unsuccessful.\n");
return -1;
}
//invoke ioctl() because the socket file descriptor exists and also the struct 'ifreq' exists
int myioctl_call=ioctl(file_descriptor,SIOCGIFADDR,&my_struct);
if (myioctl_call==-1)
{
perror("ioctl");
printf("Ooops, error when invoking ioctl() system call.\n");
close(file_descriptor);
return -1;
}
close(file_descriptor);
/* **********************************************************************
* If this completes without error , then the hardware address of the interface should have been returned in the 'my_struct.ifr_addr' which is types as struct sockaddr_in.
* ***********************************************************************/
//extract the IP Address (IPv4) from the my_struct.ifr_addr which has the type 'ifreq'
/* *** Cast the returned address to a struct 'sockaddr_in' *** */
struct sockaddr_in * ipaddress= (struct sockaddr_in *)&my_struct.ifr_addr;
/* *** Extract the 'sin_addr' field from the data type (struct) to obtain a struct 'in_addr' *** */
printf("IP Address is %s.\n", inet_ntoa(ipaddress->sin_addr));
}
If you don't mind the binary size, you can use iproute2 as library.
iproute2-as-lib
Pros:
No need to write the socket layer code.
More or even more information about network interfaces can be got. Same functionality with the iproute2 tools.
Simple API interface.
Cons:
iproute2-as-lib library size is big. ~500kb.
I found a quite easy way to get ip, by take advantage of using bash command:
hostname -I
but use "hostname -I" natively will print the result on screen, we need to use "popen()" to read result out and save it into a string, here is c code:
#include <stdio.h> // popen
#include "ip_common_def.h"
const char * get_ip()
{
// Read out "hostname -I" command output
FILE *fd = popen("hostname -I", "r");
if(fd == NULL) {
fprintf(stderr, "Could not open pipe.\n");
return NULL;
}
// Put output into a string (static memory)
static char buffer[IP_BUFFER_LEN];
fgets(buffer, IP_BUFFER_LEN, fd);
// Only keep the first ip.
for (int i = 0; i < IP_BUFFER_LEN; ++i)
{
if (buffer[i] == ' ')
{
buffer[i] = '\0';
break;
}
}
char *ret = malloc(strlen(buffer) + 1);
memcpy(ret, buffer, strlen(buffer));
ret[strlen(buffer)] = '\0';
printf("%s\n", ret);
return ret;
}