I'm using text files as a database for saving users' information for a game which i made using swi-prolog. The information is saved like this:user(Name,Password,Age,Points). What i want to do is to change a user's Points without having to rewrite the entire db. In other words, I am looking for something that will work like retractall(user(Name,_,_,_)), but with the text file. I know how to find the specific user using read/2, and how to assert a new fact using write/2, but i don't know how to delete one specific line in the text file.
Thank you for helping.
Take a look at SWI-Prolog's library(persistency). It removes a fact by adding a line that the fact is removed. If the file gets too big with add/remove lines, it provides db_sync/1 to write a clean file. OS file system operations do not allow to remove part of a file (except from truncating the end). The normal way to do this is to write a new file and, if successful, rename this to the existing one, so nothing is lost if you crash while writing the new file.
Related
I have a set of configuration files (10 or more), and if user opens any of these file using any editor (e.g vim,vi,geany,qt,leafpad..). How would I come to know that which file is opened and if some writing process is done, then it is saved or not (using C code).
For the 1st part of your question, please refer e.g. to How to check if a file has been opened by another application in C++?
One way described there is to use a system tool like lsof and call this via a system() call.
For the 2nd part, about knowing whether a file has been modified, you will have to create a backup file to check against. Most editors already do that, but their naming scheme is different, so you might want to take care of that yourself. How to do that? Just automatically create a (hidden) file .mylogfile.txt if it does not exist by simply copying mylogfile.txt. If .mylogfile.txt exists, is having an older timestamp than mylogfile.txt, and differs in size and/or hash-value (using e.g. md5sum) your file was modified.
But before re-implementing this, take a look at How do I make my program watch for file modification in C++?
I have a huge 1.9 GB data file without extension I need to open and get some data from, the problem is this data file is extension-less and I need to know what extension it should be and what software I can open it with to view the data in a table.
here is the picture :
Its only 2 lines file, I already tried csv on excel but it did not work, any help ?
I have never use it but you could try this:
http://mark0.net/soft-tridnet-e.html
explained here:
http://www.labnol.org/software/unknown-file-extensions/20568/
The third "column" of that line looks 99% chance to be from php's print_r function (with newlines imploded to be able to stored on a single line).
There may not be a "format" or program to open it with if its just some app's custom debug/output log.
A quick google found a few programs to split large files into smaller units. THat may make it easier to load into something (may or may not be n++) for reading.
It shouldnt be too hard to mash out a script to read the lines and reconstitute the session "array" into a more readable format (read: vertical, not inline), but it would to be a one-off custom job, since noone other than the holder of your file would have a use for it.
I have opened a file using a and r+ but when I use fseek and ftell the file pointer is always 0.
My file looks like this:
1 -3
2 -8
And I want to add another line between the two but it is added in the end after the last line.
Someone in another forum said that when you open the file in append the pointer is always zero and you have to open it in r+ and if that doesn't work "you have to read the complete data and then insert the data in the variables and write it back." but I don't understand what they mean by that.
Can anyone help with inserting numbers in the middle of a file?
Thanks!
Would something like this work?
To transfer the data?
rewind(fp);
fscanf(fp,"%d",&ch);
fprintf(fp1,"%d",ch);
fseek(fp,1,0);
fscanf(fp,"%d",&ch);
fprintf(fp1,"%d",ch);
Like others already said, there's no easy way to insert data in the middle of a file. If you really want to do this, you can implement the following steps:
Create a second file
Copy all data before the place you want to insert to the second file
Insert the line you want to the second file
Copy the remaining data to the second file
Delete the original file
Rename the second file
Other approach is using binary files instead of text files. Although binary files are a bit harder to learn, once you understand how they work you'll see that working with them is much like working with arrays. To perform this task, for example, you'd not even need to use an auxiliary file.
There is no open mode that will allow you to "insert" data into a file at a random point. The only place you can add data without overwriting existing data is the end of the file (what you get opening with mode "a").
If you want to insert at a random position, you need to do it yourself.
One of the easier ways is to re-write the file completely (transfer the start of the old file to a new file, add your data to the new file, transfer the rest of the old file, and rename/overwrite at the end).
The hard way: you need to "shift" all the data from your insertion point to the end-of-file manually. That's not trivial to get right.
There isn't an easy way to insert data in the middle of the file. A file is basically an array of characters. To add a character in the middle, you need to copy everything following your insertion point down one location. With a file you need to read the data that follows and write it after your addition.
Generally, when you want to do something like this you create a new file. You copy the old file into it up to the point where you want to insert, then you write the data you want to insert, then you copy the rest of the old file. Finally, you rename the new file to the old file.
I am reading info (numbers) from a txt file and after that I am adding to those numbers, others I had in another file, with the same structure.
At the start of each line in the file is a number, that identifies a specific product. That code will allow me to search for the same product in the other file. In my program I have to add the other "variables" from one file to the other, and then replace it, in the same place in one of those files.
I didn't open any of those files with a or a+, I did it with r and r+ because i want to replace the information in the lines that may be in the middle of the file, and not in the end of it.
The program compiles, and runs, but when it comes to replace the info in the file, it just doesn't do anything.
How should I resolve the problem?
A program can replace (overwrite) text in the middle of the file. But the question is whether or not this should be performed.
In order to insert larger text or smaller text (and close up the gap), a new text file must be written. This is assuming the file is not fixed width. The fundamental rule is to copy all original text before the insertion to a new file. Write the new text. Finally write the remaining original text. This is a lot of work and will slow down even the simplest programs.
I suggest you design your data layout before you go any further. Also consider using a database, see my post: At what point is it worth using a database?
Your objective is to design the data to minimize duplication and data fetching.
I've got a service which runs all the time and also keeps a log file. It basically adds new lines to the log file every few seconds. I'm written a small file which reads these lines and then parses them to various actions. The question I have is how can I delete the lines which I have already parsed from the log file without disrupting the writing of the log file by the service?
Usually when I need to delete a line in a file then I open the original one and a temporary one and then I just write all the lines to the temp file except the original which I want to delete. Obviously this method will not word here.
So how do I go about deleting them ?
In most commonly used file systems you can't delete a line from the beginning of a file without rewriting the entire file. I'd suggest instead of one large file, use lots of small files and rotate them for example once per day. The old files are deleted when you no longer need them.
Can't be done, unfortunately, without rewriting the file, either in-place or as a separate file.
One thing you may want to look at is to maintain a pointer in another file, specifying the position of the first unprocessed line.
Then your process simply opens the file and seeks to that location, processes some lines, then updates the pointer.
You'll still need to roll over the files at some point lest they continue to grow forever.
I'm not sure, but I'm thinking in this way:
New Line is a char, so you must delete chars for that line + New Line char
By the way, "moving" all characters back (to overwrite the old line), is like copying each character in a different position, and removing them from their old position
So no, I don't think you can just delete a line, you should rewrite all the file.
You can't, that just isn't how files work.
It sounds like you need some sort of message logging service / library that your program could connect to in order to log messages, which could then hide the underlying details of file opening / closing etc.
If each log line has a unique identifier (or even just line number), you could simply store in your log-parsing the identifier until which you got parsing. That way you don't have to change anything in the log file.
If the log file then starts to get too big, you could switch to a new one each day (for example).