I have a page that ask of users opinion about a topic. Their responses are then saved into a table. What I want to do is to check how many users selected an option 1,2,3 and 4.
What I have now are multiple T-SQL queries that run successfully but I believe there is a simplified version of the code I have written. I would be grateful if someone can simplify my queries into one single query. Thank you.
here is sample of data in the database table
enter image description here
$sql4 = "SELECT COUNT(CO) FROM GnAppItms WHERE CO='1' AND MountID='".$mountID."'";
$stmt4 = sqlsrv_query($conn2, $sql4);
$row4 = sqlsrv_fetch_array($stmt4);
$sql5="SELECT COUNT(CO) FROM GnAppItms WHERE CO='2' AND MountID='".$mountID."'";
$stmt5=sqlsrv_query($conn2,$sql5);
$row5=sqlsrv_fetch_array($stmt5);
$sql6="SELECT COUNT(CO) FROM GnAppItms WHERE CO='3' AND MountID='".$mountID."'";
$stmt6=sqlsrv_query($conn2,$sql6);
$row6=sqlsrv_fetch_array($stmt6);
$sql7="SELECT COUNT(CO) FROM GnAppItms WHERE CO='4' AND MountID='".$mountID."'";
$stmt7=sqlsrv_query($conn2,$sql7);
$row7=sqlsrv_fetch_array($stmt7);
You can do it by using group by in sql server
example :
create table a
(id int,
mountid nvarchar(100),
co int,
)
insert into a values (1,'aa',1)
insert into a values (2,'aa',2)
insert into a values (3,'aa',1)
insert into a values (4,'aa',2)
insert into a values (5,'aa',3)
Query
select co,count(co)as countofco from a
where mountid='aa'
group by
co
result
co countofco
1 2
2 2
3 1
Note : Beware of SQL injection when you are writing a sql query, so always use parametrized query. You can edit the above example code and make it as a parametrized query for preventing sql injection
Related
I have created an Sql table to trace objects' operation history. I have two columns; first one is the self tracing code and second tracing code is the tracing code for the code coming from source object to target. I created this to be able to look up the route of operations through the objects. You can see the tracing sample table below:
I need to create an sql code to query to show all the route in one table. When I first select the self code, it will be the incoming code for previous rows. There may be more than one incoming code to self and I want to be able to trace all. And I want to reach end until my search is null.
I tried select query like below but I am so new sql and need your help.
SELECT [TracingCode.Self],
[TracingCode.Incoming],
[EquipmentNo]
FROM [MKP_PROCESS_PRODUCT_REPORTS].[dbo].[ProductionTracing.Main]
WHERE [TracingCode.Self] = (SELECT [TracingCode.Incoming]
FROM [MKP_PROCESS_PRODUCT_REPORTS].[dbo].[ProductionTracing.Main]
WHERE [TracingCode.Self] = (SELECT [TracingCode.Incoming]
FROM [MKP_PROCESS_PRODUCT_REPORTS].[dbo].[ProductionTracing.Main]
WHERE [TracingCode.Self] = (SELECT [TracingCode.Incoming]
FROM [MKP_PROCESS_PRODUCT_REPORTS].[dbo].[ProductionTracing.Main]
WHERE [TracingCode.Self] = '028.001.19.2.3')));
To do this kind of parent/child thing to any level without explicitly coding all levels you need to use a recursive CTE.
More details here
https://www.red-gate.com/simple-talk/sql/t-sql-programming/sql-server-cte-basics/
Here is some test data and a solution I came up with. Note that three records actually match 028.001.19.2.3
If this doesn't do what you need please explain further with sample data.
DECLARE #Sample TABLE (
TC_Self CHAR(14) NOT NULL,
TC_In CHAR(14) NOT NULL,
EquipmentNo INT NOT NULL
);
INSERT INTO #Sample (TC_Self, TC_In, EquipmentNo)
VALUES
('028.001.19.2.3','026.003.19.2.2',96),
('028.001.19.2.3','026.001.19.2.2',96),
('028.001.19.2.3','026.002.19.2.2',96),
('028.001.19.2.2','026.002.19.2.1',96),
('028.001.19.2.2','026.002.19.2.1',96),
('028.001.19.2.1','026.002.19.1.1',96),
('026.003.19.2.2','024.501.19.2.5',117),
('024.501.19.2.5','024.501.19.2.6',999),
('024.501.19.2.6','024.501.19.2.7',998);
WITH CTE (RecordType, TC_Self, TC_In, EquipmentNo)
AS
(
-- This is the 'root'
SELECT 'Root' RecordType, TC_Self, TC_In, EquipmentNo FROM #Sample
WHERE TC_Self = '028.001.19.2.3'
UNION ALL
SELECT 'Leaf' RecordType, S.TC_Self, S.TC_In, S.EquipmentNo FROM #Sample S
INNER JOIN CTE
ON S.TC_Self = CTE.TC_In
)
SELECT * FROM CTE;
Also please note that most of the time to generate this answer was taken in generating the sample data to use.
In future when asking questions, people are far more likely to help if you post this sample data generation yourself
I have two tables
Chapters_tbl (chID, name)
Status_tbl (chID, Ch_status)
For every chID in Chapters_tbl, I want to insert that chID into Status_tbl and Ch_status
I can use both a SQL Server stored procedure or Entity Framework in C#.
How can I do this?
Using T-SQL...
INSERT dbo.Status_tbl (chID, Ch_status)
SELECT
c.chID,
Ch_status = 1
FROM
dbo.Chapters c
WHERE
NOT EXISTS (
SELECT 1
FROM dbo.Staus_tbl s
WHERE c.chID = s.chID
);
First of all I have never attempted something like this in SSIS and I am very new to SSIS package development.
I need to build a component in my package that will run through a table of data (say 80 rows) and set a field titled DisplayOrder to the auto incremented number. The catch is that one of the records HAS to be set to 0 and then the rest of he records set to the auto incremented number.
In regards to code, I am not even sure what code to attach to this question or even what screenshots.
I finally figured it out and there is no need for a loop.
Create a SQL Task to clear the linked Table.
Script Used
DELETE FROM [Currency].[ExchangeRates]
Create a SQL Task to clear the main table.
Script Used
DELETE FROM [Currency].[CurrencyList]
Load the values into the main table.
Actions Used
Load values from XML Source
Dump values to [ExchangeRates] Table
Create a SQL Task to load the Values from the main table to the linked table.
Script Used
INSERT INTO [Currency].[CurrencyList] (CurrencyCode, CurrencyName, ExchangeRateID, DisplayOrder) SELECT [er].[TargetCurrency] AS [CurrencyCode], [er].[TargetName] AS [CurrencyName], [er].[ID] AS [ExchangeRateID], ROW_NUMBER() OVER (ORDER BY [ER].[TargetName]) AS [DisplayOrder] FROM [Currency].[ExchangeRates] AS [er] ORDER BY [CurrencyName]
Create a SQL Task to load a new record to the main table for use as DisplayOrder 0.
Script Used
INSERT INTO [Currency].[ExchangeRates] ([Title], [Link], [Description], [PubDate], [BaseCurrency], [TargetCurrency], [TargetName], [ExchangeRate]) VALUES ('1 USD = 1 USD','http://www.floatrates.com/usd/usd/','1 U.S. Dollar = 1 U.S. Dollar',(SELECT TOP 1 [PubDate] FROM [Currency].[ExchangeRates]),'USD','USD','United States Dollar','1')
Create a SQL Task to reference the newly created record from the main table.
Script Used
INSERT INTO [Currency].[CurrencyList] (CurrencyCode, CurrencyName, ExchangeRateID, DisplayOrder) SELECT [er].[TargetCurrency] AS [CurrencyCode], [er].[TargetName] AS [CurrencyName], [er].[ID] AS [ExchangeRateID], 0 AS [DisplayOrder] FROM [Currency].[ExchangeRates] AS [er] WHERE [er].[TargetCurrency] = 'USD'
I am trying to use Dapper support my data access for my server app.
My server app has another application that drops records into my database at a rate of 400 per minute.
My app pulls them out in batches, processes them, and then deletes them from the database.
Since data continues to flow into the database while I am processing, I don't have a good way to say delete from myTable where allProcessed = true.
However, I do know the PK value of the rows to delete. So I want to do a delete from myTable where Id in #listToDelete
Problem is that if my server goes down for even 6 mintues, then I have over 2100 rows to delete.
Since Dapper takes my #listToDelete and turns each one into a parameter, my call to delete fails. (Causing my data purging to get even further behind.)
What is the best way to deal with this in Dapper?
NOTES:
I have looked at Tabled Valued Parameters but from what I can see, they are not very performant. This piece of my architecture is the bottle neck of my system and I need to be very very fast.
One option is to create a temp table on the server and then use the bulk load facility to upload all the IDs into that table at once. Then use a join, EXISTS or IN clause to delete only the records that you uploaded into your temp table.
Bulk loads are a well-optimized path in SQL Server and it should be very fast.
For example:
Execute the statement CREATE TABLE #RowsToDelete(ID INT PRIMARY KEY)
Use a bulk load to insert keys into #RowsToDelete
Execute DELETE FROM myTable where Id IN (SELECT ID FROM #RowsToDelete)
Execute DROP TABLE #RowsToDelte (the table will also be automatically dropped if you close the session)
(Assuming Dapper) code example:
conn.Open();
var columnName = "ID";
conn.Execute(string.Format("CREATE TABLE #{0}s({0} INT PRIMARY KEY)", columnName));
using (var bulkCopy = new SqlBulkCopy(conn))
{
bulkCopy.BatchSize = ids.Count;
bulkCopy.DestinationTableName = string.Format("#{0}s", columnName);
var table = new DataTable();
table.Columns.Add(columnName, typeof (int));
bulkCopy.ColumnMappings.Add(columnName, columnName);
foreach (var id in ids)
{
table.Rows.Add(id);
}
bulkCopy.WriteToServer(table);
}
//or do other things with your table instead of deleting here
conn.Execute(string.Format(#"DELETE FROM myTable where Id IN
(SELECT {0} FROM #{0}s", columnName));
conn.Execute(string.Format("DROP TABLE #{0}s", columnName));
To get this code working, I went dark side.
Since Dapper makes my list into parameters. And SQL Server can't handle a lot of parameters. (I have never needed even double digit parameters before). I had to go with Dynamic SQL.
So here was my solution:
string listOfIdsJoined = "("+String.Join(",", listOfIds.ToArray())+")";
connection.Execute("delete from myTable where Id in " + listOfIdsJoined);
Before everyone grabs the their torches and pitchforks, let me explain.
This code runs on a server whose only input is a data feed from a Mainframe system.
The list I am dynamically creating is a list of longs/bigints.
The longs/bigints are from an Identity column.
I know constructing dynamic SQL is bad juju, but in this case, I just can't see how it leads to a security risk.
Dapper request the List of object having parameter as a property so in above case a list of object having Id as property will work.
connection.Execute("delete from myTable where Id in (#Id)", listOfIds.AsEnumerable().Select(i=> new { Id = i }).ToList());
This will work.
I am not much strong in SQL, so looking for some help.
First I am looking for suggestion for the best way to implement this logic in SQL and then some sample code to implement.
My portal is going to connect Students and Training Providers.
Students: Select what courses (multiple) they want, type of delivery (online, class room), Industry(domain) to which the course to be targeted more, Location Preference.
Training Providers: Select what courses offering (so one record for each course), offering locations, type of delivery for each course, industries (multiple) it is targeting.
When student login:
I would like to create SP which in turn create view to store the matched records of the Training Providers data which matches that student needs of that StudentID, CourseID passed to SP
I have created the following sp ( but not included create view part as I am not sure how to do this)
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_TPsMatched2StuCourse]
-- Add the parameters for the stored procedure here
#StuID int,
#CourseID int
AS
BEGIN
Select TP.MemID,TP.PastExp,SN.DeliveryType,SN.LocPref,SN.Industry,SC.CourseID from
tbl_TrainingProvider as TP , tbl_StuCourses as SC, tbl_StuNeeds SN
where SN.CourseID = #CourseID and SN.StuID = #StuID and
SN.DeliveryType in (TP.DeliveryMode) and
SN.LocPref IN (TP.LocOffering) and
SN.Industry IN (TP.Industries)
END
--- exec sp_ELsMatched2EntProp 1, 1
Why I need to put the data is as follows:
Assume the data is stored in that dynamic view and that would be bind to datagrid. Student then select interested TPs. Then only contact details would be shared to each other and this cannot be reveresed. So I would put this interested data in another table later. Every time data changes, hence the matches. Student can change some of his/her needs or new TPs join etc so view to be temparory.
when I executed this using above command, I am not getting data though it matches few records. What is wrong I am doing.
Any help would be greatly appreciated.
You are not getting expected results because you filter out too many records in WHERE( I'm talking about this part : SN.DeliveryType in (TP.DeliveryMode) and
SN.LocPref IN (TP.LocOffering) and SN.Industry IN (TP.Industries)). I'd recommend to use JOIN ... ON instead of specifying all tables in FROM and join condition in WHERE. I'm not sure what you want exactly, but I believe you are looking for
FROM tbl_StuNeeds SN
LEFT JOIN tbl_TrainingProvider as TP ON (TP.DeliveryMode = SN.DeliveryType AND
SN.LocPref = TP.LocOffering AND TP.Industries = SN.Industry)
WHERE SN.CourseID = #CourseID and SN.StuID = #StuID
Also, there is no join conditions in your code for tbl_StuCourses as SC which results in cross-join.
Finally, why do you need a stored procedure at all? From what I see in your example, a table-valued function will work better:
CREATE FUNCTION [dbo].getTPsMatched2StuCourse(#StuID INT,#CourseID INT)
RETURNS TABLE AS
RETURN
Select .... ;