I am getting error to add WITH RESULT SETS clause in OLE DB source activity in SSIS Package while calling Stored Procedure in SQL Server 2012 version 11.0.3000. I am getting this error only on dev server, the same package working fine on other servers. Previously these packages was also working fine on dev. After adding WITH RESULT SETS clause it works fine. Can some one tell me the reason behind it?
Regards,
Muhammad Kamal
Related
We've been recently trying to migrate out of SQL Server 2016 to SQL Server 2019 on our servers, that includes upgrading all the SSIS Packages we have on our catalog.
The migration wizard had no issues and migrated all packages with no errors, and on the surface everything seems OK. Even tried a test run on Visual Studio, and everything worked. But once we deployed all the packages on the catalog and tried a run via there, we started getting the following error:
none
Error: 0xC0014020 at Load ODI_PaymentDevice, ODBC Source [14]: SQLSTATE: HY010, Message: [Microsoft][ODBC Driver Manager] Function sequence error;
Error: 0xC0209029 at Load ODI_PaymentDevice, ODBC Source [14]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "ODBC Source.Outputs[ODBC Source Output]" failed because error code 0xC020F450 occurred, and the error row disposition on "ODBC Source" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047038 at Load ODI_PaymentDevice, SSIS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on ODBC Source returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
This is only on the packages that have an connection with Hive, using the ODBC Connector on SSIS, and then ODBC Data Source on a Data Flow
Based on the error code, it could be narrowed down to the ODBC Connection we have to our Hadoop-Hive cluster, the connection for sure works as we tested it on the Windows' ODBC Sources tool, and works as well on Visual Studio. We've researched a lot about this error and the different soulutions to this. So we tried a lot of different things.
Deleting the data source and then creating a new one (To update metadata)
Running in 32 Bit mode
Updating Microsoft's Hive ODBC driver
Switching to a different vendor's driver (CDATA)
Switching to an ADO.NET connection instead
Played around with the driver's configuration, almost all combinations possible
After trying all of this to no avail, we tried again on Visual Studio, and to our surprise, it also started to fail there too.
After trying a few different things, we could reproduce again the conditions in which the package worked, and it is the strangest thing, we could not find anyone with a similar issue on the internet so far.
So, as stated before, the connection works, and the package itself also does, BUT, we have a For Each Loop Container, that iterates through dates, to load data for the last X dates we have, so if there is any kind of loop container (For Each loop, for example) that contains a query against our ODBC source, it fails on the second loop around 100% of the time.
So that is the reason it worked on Visual Studio, because it only ran once (had only one date to process as test), but when deployed, it had to fetch real data, with a bunch of different dates.
To confirm that this is indeed the issue, deployed the package, and updated the table with dates to load, to have only available 1 day. And the package ran through. Also ruling out any parameter issue on the deployment/server/catalog.
After this discovery we tried a few different things:
Passing NULL on every column to see if there is some issues with metadata between loops
Also activated LOG_TRACE on the Hive ODBC driver, to have a very detailed log of what is happening, we see the query going out for the second loop on the log, and it also appears on TEZ (our Hive execution engine) but very briefly, only fractions of a second. And then it cancels itself, so the query is arriving the cluster, but somehow SSIS drops the connection by itself.
As mentioned before, we couldn't find anything like this before, and we cannot think of any other options to solve the issue without having to directly change the packages or not upgrading to 2019 at all, which is not ideal knowing that it is already outside of the mainstream support cycle.
Anyone has an idea how this might be solved or what may be causing this issue?
I have faced a very similar issue (if not the same) with the SSIS ODBC Source Component inside a For Loop for transferring records in batches from a remote PostgreSQL server to a database on MS SQL Server 2019. My Visual Studio is 2019 and the MS SQL Server is 2019 as well. The very weird thing was that the package was running as expected in VS (Debugging and Without Debugging), then it was working quite well through the SQL Job Agent of the SQL Server installed on my machine, but when deployed on the production SQL Server (the same version and psqlodbc driver installed there) the package was running successfully for the first iteration of the For Loop component and then unexpectedly was crashing, showing in the logs the same errors you have posted above: SQLSTATE: HY010, Message: [Microsoft][ODBC Driver Manager] Function sequence error;.....etc. After many hours spent on this without any success, I finally fixed it and now it is working like a charm; hence decided to share how I figured that out, so hopefully it may be of help to you or anyone facing that challenge.
What I found out is that for some reason the problem was happening inside the ODBC Source Component, but could not do much as it is like a black box. I fixed the problem by switching to a Script Source Component, so that I took control over the connection in the C# code. Here below, I also share the code:
#region Namespaces
using System;
using System.Data;
using System.Data.Odbc;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
#endregion
...........
[Microsoft.SqlServer.Dts.Pipeline.SSISScriptComponentEntryPointAttribute]
public class ScriptMain : UserComponent
{
...........
public override void CreateNewOutputRows()
{
string connectionString = this.Connections.PostgreSQLODBCConn.ConnectionString;
using (OdbcConnection conn = new OdbcConnection(connectionString))
{
using (OdbcCommand cmd = conn.CreateCommand())
{
cmd.CommandText = "SELECT * FROM fn_transfer_records(500000);";
cmd.CommandType = CommandType.Text;
DataTable dt = new DataTable();
conn.Open();
using (OdbcDataAdapter adapter = new OdbcDataAdapter(cmd))
{
adapter.Fill(dt);
foreach (DataRow row in dt.Rows)
{
Output0Buffer.AddRow();
Output0Buffer.col1 = (Int32)row["col1"];
Output0Buffer.col2= (double)row["col2"];
}
}
}
}
}
}
The PostgreSQLODBCConn used in the code above is the name of the Connection added to the connections collection of the Script Component added through the visual editor of the component when you double click on it.
Hope this would be of help...
Ensure your SQL Server Target version is set to SQL Server 2019. This can be found from the Project properties. This error is typical of a mismatched target server, as the issue is only present during deployment, and not during development.
I have an issue whereby I can execute an SSRS report which calls an Oracle Stored Procedure in VS2017, but when I deploy to the SSRS Server and run, it returns the following message:-
• An error has occurred during report processing. (rsProcessingAborted)
o Query execution failed for dataset 'spTestSubDet'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
The dataset 'spTestSubDet' is the Oracle Stored Proc.
Some configuration details:-
Oracle Database 19c Standard Edition 2 Release 19.0.0.0.0 - Production
SSRS version is 15.0.19528.0.
SQL Server version is 2014.
I can execute SQL code and Views against the Oracle server with the same DSN from the deployed report (without the oracle stored proc being present), so I know the DSN configuration is not the issue.
I have also check marked the "Use single transaction when processing the queries" box in the DS Properties.
I’m guessing that it might be some form of “Execute” permissions issue on Oracle, rather than the Report Server, where the Stored Proc is concerned.
As a developer, I don’t have any DBA permissions to interrogate how the SSRS Server is set up, or the Oracle DB, so any suggestions will have to be passed on to my ICT dept.
I also can't enable "remote errors" on the Report Server, but have requested that with the ICT dept.
Any help greatly appreciated.
Seems I got lucky with enabling “Remote Errors” on the report server and not personally having to restart the service.
I now have a more explicit error message from the SSRS report:-
“ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'SPTESTSUBDET' ORA-06550: line 1, column 7: PL/SQL: Statement ignored”
As mentioned in my original post, the report works fine locally from VS2017, so I don’t know why it’s telling me when deployed and run from the server that there seems to be a problem with the SQL code:-
create or replace
PROCEDURE SPTESTSUBDET
(s1 OUT SYS_REFCURSOR)
IS
BEGIN
OPEN s1 FOR
SELECT
*
FROM
onemain.sbceysubmitted sbceysub
WHERE
sbceysub.STUD_ID = 167071
;
END SPTESTSUBDET;
It’s as simple a test as I can put together and doesn’t use any parameters to complicate things.
I’m wondering if it might be a driver issue, though why it works locally and not on the server is baffling me.
I have Oracle Developer tools “ODAC v18.3.0” installed for VS2017.
The user in the referenced post below had what looked like to be the same problem, but it's not clear what version of the ODAC tools has been used to resolve the issue:-
https://stackoverflow.com/a/60569788/2053847
Any thoughts/help greatly appreciated.
The easiest thing to do is check the log files. I bet this is a SQL exception and it is related to something wrong with the way you are calling the stored procedure or within the stored procedure itself. The log files reside on the SSRS instance at -> SQL SERVER INTALL DIR\MSSQL.15(OR OTHER SSRS VERSION DIR)\Reporting Service\Log Files. Log files for the SSRS manager and SSRS service are saved here. Open the log for the SSRS Service after you encounter the error search for "spTestSubDet" and you should see the detail of the exception that is causing your problems.
I'm trying to use SSIS to load some data from Oracle database to MSSQL database.
I created the project and used the ADO.Net source and was able to create a connection to Oracle and run queries and view results.
However when I actually run the package I get the following error:
Error: 0xC0208449 at Data Flow Task, ADO NET Source 2: ADO NET Source has failed to acquire the connection {EECB236A-59EA-475E-AE82-52871D15952D} with the following error message: "Could not create a managed connection manager.".
It seems similar to the issue here
And I did find that I have two oracle clients version installed "11.1" and "12.2".
One is used by PL/SQL and the other by other entity framework project.
If this is the issue I just wanted a way to tell the SSIS to pick-up the correct one.
I tried adding Entry in machine.config for "oracle.manageddataaccess.client" section with the desired version.
I also tried using other types of data sources but couldn't even create a successful connection
I tried changing the Run64bitRuntime property in the project to False
Note: I don't have SSIS installed on my machine.
Eventually, I just had to remove the entries related to 11.1 in path variable then restarted my machine.
Also I switched to "dotConnectForOracle" for connection and now it seems to be working fine.
I'm expecting issues related to other applications that might still be using the 11.1 version, but that will be a problem for another day.
Always make sure to write the user (oracle schema) in uppercase and some special characters [in my case it was $] in the password needs escape character even if you're using the wizard not the cmd
I still don't understand the whole issue but I hope this helps someone some day.
I use SQL Server 2012 and I have some databases on it. The problem is I suddenly get an error saying,
object reference not set to an instance of an object
I get this error when:
Going to write a new query
Select previously entered data by right click the table name ->
Select top 1000 rows
What I can do without getting error message:
Log into my instance successfully using both Windows Authentication mode and SQL Authentication mode.
Edit the table data by right click the table name -> Edit top 200 rows
Create a new database
I'm using:
Microsoft SQL Server Management Studio: 11.0.3128.0
Microsoft .NET Framework: 4.0.30319.34014
Operating System: Windows 8.1
Here are some snapshots of the error.
Please give me a solution to fix this problem. Your help will be highly appreciated.
I fixed the problem by running SSMS as administrator.
I could solve the error.
Repair the SQL Server.
Go to Add/remove programs Microsoft SQL Server 2012(x64) -> Uninstall/Change -> Repair.
Select the instance that you want to repair here.
For me, after repairing the instance, the error was solved.
Thanks for all who spent their valuable time to reply my question.
I got the same error message. Problem was 0 bytes free on the C: drive.
Its may be late, but i get the same error in SQL SERVER 2016, i resolved it by assigning full access to the back up folder.
I faced the same error once in my project. This is purely due to SSMS(sql client) is corrupted. Just for cross check that server is fine and client is corrupted, try to connect to the sql-server in this machine from any other server if you have access and query the tables. If it returns data, just uninstall and reinstall the client(ssms) to solve the issue
Thanks
I got the same error for SQL 2016 and the only solution for me was to completely uninstall (in appwiz.cpl) all entries Visual Studio + SQL. Then I executed VisualStudioUninstaller and I reinstalled SQL and after Visual Studio.
I got the same message when I try to alter table to add new column . Issue is I haven't enclosed data types using '[' datatype ']' . Its Real data type. But It got fixed when I enclosed in using square braces.
My solution for this was to extract the csv file with the python library pandas rather than saving it with Excel. Further, I removed columns that I didn't need as a few columns caused formatting errors during the import.
For those who are unable to modify their SQL configuration due to administrative restrictions at work:
I was able to open a new query page by creating a SQL Server Scripts project and adding a new query through the solution explorer
I got the message after deleting a database. The database was gone, so I moved on.
I created an SSIS package to pull data from OLAP Cube and push it into SQL Server using SSIS 2012. I deployed the same on the SQL Server SSIS DB and created a SQL Server Agent Job to run the package. I have an account configured to run the job (not by creating proxy in the job, but SQL Server Agent is running under that account), that has access to the OLAP Cube. The job is running sometimes and failing sometimes.
Why the job behaving weirdly? Any help on the issue will help me a lot.
I am using SQL Server 2012 SP1 enterprise edition (11.0.3000.0) (if it helps). The error message which pops up when it fails is :
OLE DB Source failed the pre-execute phase and returned error code 0xC0202009
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: ""Microsoft OLE DB Provider for SQL Server 2012 Analysis Services."" Hresult: 0x00000001 Description: ""Error Code = 0x80040E05, External Code = 0x00000000:."".
"
I have had the same error on SQL2008 and now on SQL2012 SSIS, but have been able to eliminate / workaround.
We have a Loop Container in our Control flow that contains a data-flow task with an MDX source. The MDX query for the data-flow source is dynamically built (via an expression) on each iteration of the Loop container (however it always returns the "same shaped" results - only the filters in the WHERE clause are different).
We've found the error to be somewhat intermittent - sometimes the package will complete successfully, other times it will fail with the 0x80040E05 error at varying iterations thru the container loop.
To alleviate the problem we setup the SQL Agent job-step for this package to re-try on failure for up to 5 retries - not an ideal workaround, but it helped to improve the success rate of the Job.
We have no idea why this error is occurring or what is causing it, however it appears to be timing-related in some way and I have only seen the issue when using a SSAS OLE-DB data source with a dynamically generated MDX query. I have managed to virtually eliminate the error from occurring with a not ideal workaround in the SSIS package - no idea why this works/helps (hopefully Microsoft will be able to work it out and resolve the issue as it's been plaguing us since SQL2008 and is still here in SQL2012 SP1...
Workaround for MDX causing 0x80040E05 error:
Within our loop container we have added a Script task with OnSuccess precedent constraint to the data-flow task that contains the dynamically generated MDX source query. The script task simply introduces a WAIT in the processing immediately after the data-flow task completes of about 5 seconds, before allowing SSIS to continue with the next iteration (e.g. System.Threading.Thread.Sleep(5000)).
With this delay in place we have had much more stable SSIS package executions - dont know why, but that's what we have observed. Also note that when we migrated to SQL2012 SSIS packages the 0x80040E05 error returned, however we were able to eliminate it once more by increasing the WAIT time to 10 seconds on this script task.
Now waiting for 10 seconds is not an ideal solution / workaround to this problem - particularly when it is contained within a Loop Container (in our case it has added nearly 30 minutes of "WAIT time" to the package execution duration), however this workaround is better than having the package fail 80%+ of the time