Related
I don't understand how to use $scope.$watch and $scope.$apply. The official documentation isn't helpful.
What I don't understand specifically:
Are they connected to the DOM?
How can I update DOM changes to the model?
What is the connection point between them?
I tried this tutorial, but it takes the understanding of $watch and $apply for granted.
What do $apply and $watch do, and how do I use them appropriately?
You need to be aware about how AngularJS works in order to understand it.
Digest cycle and $scope
First and foremost, AngularJS defines a concept of a so-called digest cycle. This cycle can be considered as a loop, during which AngularJS checks if there are any changes to all the variables watched by all the $scopes. So if you have $scope.myVar defined in your controller and this variable was marked for being watched, then you are implicitly telling AngularJS to monitor the changes on myVar in each iteration of the loop.
A natural follow-up question would be: Is everything attached to $scope being watched? Fortunately, no. If you would watch for changes to every object in your $scope, then quickly a digest loop would take ages to evaluate and you would quickly run into performance issues. That is why the AngularJS team gave us two ways of declaring some $scope variable as being watched (read below).
$watch helps to listen for $scope changes
There are two ways of declaring a $scope variable as being watched.
By using it in your template via the expression <span>{{myVar}}</span>
By adding it manually via the $watch service
Ad 1)
This is the most common scenario and I'm sure you've seen it before, but you didn't know that this has created a watch in the background. Yes, it had! Using AngularJS directives (such as ng-repeat) can also create implicit watches.
Ad 2)
This is how you create your own watches. $watch service helps you to run some code when some value attached to the $scope has changed. It is rarely used, but sometimes is helpful. For instance, if you want to run some code each time 'myVar' changes, you could do the following:
function MyController($scope) {
$scope.myVar = 1;
$scope.$watch('myVar', function() {
alert('hey, myVar has changed!');
});
$scope.buttonClicked = function() {
$scope.myVar = 2; // This will trigger $watch expression to kick in
};
}
$apply enables to integrate changes with the digest cycle
You can think of the $apply function as of an integration mechanism. You see, each time you change some watched variable attached to the $scope object directly, AngularJS will know that the change has happened. This is because AngularJS already knew to monitor those changes. So if it happens in code managed by the framework, the digest cycle will carry on.
However, sometimes you want to change some value outside of the AngularJS world and see the changes propagate normally.
Consider this - you have a $scope.myVar value which will be modified within a jQuery's $.ajax() handler. This will happen at some point in future. AngularJS can't wait for this to happen, since it hasn't been instructed to wait on jQuery.
To tackle this, $apply has been introduced. It lets you start the digestion cycle explicitly. However, you should only use this to migrate some data to AngularJS (integration with other frameworks), but never use this method combined with regular AngularJS code, as AngularJS will throw an error then.
How is all of this related to the DOM?
Well, you should really follow the tutorial again, now that you know all this. The digest cycle will make sure that the UI and the JavaScript code stay synchronised, by evaluating every watcher attached to all $scopes as long as nothing changes. If no more changes happen in the digest loop, then it's considered to be finished.
You can attach objects to the $scope object either explicitly in the Controller, or by declaring them in {{expression}} form directly in the view.
Further readings:
Make Your Own AngularJS, Part 1: Scopes And Digest
In AngularJS, we update our models, and our views/templates update the DOM "automatically" (via built-in or custom directives).
$apply and $watch, both being Scope methods, are not related to the DOM.
The Concepts page (section "Runtime") has a pretty good explanation of the $digest loop, $apply, the $evalAsync queue and the $watch list. Here's the picture that accompanies the text:
Whatever code has access to a scope – normally controllers and directives (their link functions and/or their controllers) – can set up a "watchExpression" that AngularJS will evaluate against that scope. This evaluation happens whenever AngularJS enters its $digest loop (in particular, the "$watch list" loop). You can watch individual scope properties, you can define a function to watch two properties together, you can watch the length of an array, etc.
When things happen "inside AngularJS" – e.g., you type into a textbox that has AngularJS two-way databinding enabled (i.e., uses ng-model), an $http callback fires, etc. – $apply has already been called, so we're inside the "AngularJS" rectangle in the figure above. All watchExpressions will be evaluated (possibly more than once – until no further changes are detected).
When things happen "outside AngularJS" – e.g., you used bind() in a directive and then that event fires, resulting in your callback being called, or some jQuery registered callback fires – we're still in the "Native" rectangle. If the callback code modifies anything that any $watch is watching, call $apply to get into the AngularJS rectangle, causing the $digest loop to run, and hence AngularJS will notice the change and do its magic.
AngularJS extends this events-loop, creating something called AngularJS context.
$watch()
Every time you bind something in the UI you insert a $watch in a $watch list.
User: <input type="text" ng-model="user" />
Password: <input type="password" ng-model="pass" />
Here we have $scope.user, which is bound to the first input, and we have $scope.pass, which is bound to the second one. Doing this we add two $watches to the $watch list.
When our template is loaded, AKA in the linking phase, the compiler will look for every directive and creates all the $watches that are needed.
AngularJS provides $watch, $watchcollection and $watch(true). Below is a neat diagram explaining all the three taken from watchers in depth.
angular.module('MY_APP', []).controller('MyCtrl', MyCtrl)
function MyCtrl($scope,$timeout) {
$scope.users = [{"name": "vinoth"},{"name":"yusuf"},{"name":"rajini"}];
$scope.$watch("users", function() {
console.log("**** reference checkers $watch ****")
});
$scope.$watchCollection("users", function() {
console.log("**** Collection checkers $watchCollection ****")
});
$scope.$watch("users", function() {
console.log("**** equality checkers with $watch(true) ****")
}, true);
$timeout(function(){
console.log("Triggers All ")
$scope.users = [];
$scope.$digest();
console.log("Triggers $watchCollection and $watch(true)")
$scope.users.push({ name: 'Thalaivar'});
$scope.$digest();
console.log("Triggers $watch(true)")
$scope.users[0].name = 'Superstar';
$scope.$digest();
});
}
http://jsfiddle.net/2Lyn0Lkb/
$digest loop
When the browser receives an event that can be managed by the AngularJS context the $digest loop will be fired. This loop is made from two smaller loops. One processes the $evalAsync queue, and the other one processes the $watch list. The $digest will loop through the list of $watch that we have
app.controller('MainCtrl', function() {
$scope.name = "vinoth";
$scope.changeFoo = function() {
$scope.name = "Thalaivar";
}
});
{{ name }}
<button ng-click="changeFoo()">Change the name</button>
Here we have only one $watch because ng-click doesn’t create any watches.
We press the button.
The browser receives an event which will enter the AngularJS context
The $digest loop will run and will ask every $watch for changes.
Since the $watch which was watching for changes in $scope.name
reports a change, it will force another $digest loop.
The new loop reports nothing.
The browser gets the control back and it will update the DOM
reflecting the new value of $scope.name
The important thing here is that EVERY event that enters the AngularJS context will run a $digest loop. That means that every time we write a letter in an input, the loop will run checking every $watch in this page.
$apply()
If you call $apply when an event is fired, it will go through the angular-context, but if you don’t call it, it will run outside it. It is as easy as that. $apply will call the $digest() loop internally and it will iterate over all the watches to ensure the DOM is updated with the newly updated value.
The $apply() method will trigger watchers on the entire $scope chain whereas the $digest() method will only trigger watchers on the current $scope and its children. When none of the higher-up $scope objects need to know about the local changes, you can use $digest().
I found very in-depth videos which cover $watch, $apply, $digest and digest cycles in:
AngularJS - Understanding Watcher, $watch, $watchGroup, $watchCollection, ng-change
AngularJS - Understanding digest cycle (digest phase or digest process or digest loop)
AngularJS Tutorial - Understanding $apply and $digest (in depth)
Following are a couple of slides used in those videos to explain the concepts (just in case, if the above links are removed/not working).
In the above image, "$scope.c" is not being watched as it is not used in any of the data bindings (in markup). The other two ($scope.a and $scope.b) will be watched.
From the above image: Based on the respective browser event, AngularJS captures the event, performs digest cycle (goes through all the watches for changes), execute watch functions and update the DOM. If not browser events, the digest cycle can be manually triggered using $apply or $digest.
More about $apply and $digest:
There are $watchGroup and $watchCollection as well. Specifically, $watchGroup is really helpful if you want to call a function to update an object which has multiple properties in a view that is not dom object, for e.g. another view in canvas, WebGL or server request.
Here, the documentation link.
Just finish reading ALL the above, boring and sleepy (sorry but is true). Very technical, in-depth, detailed, and dry.
Why am I writing? Because AngularJS is massive, lots of inter-connected concepts can turn anyone going nuts. I often asked myself, am I not smart enough to understand them? No! It's because so few can explain the tech in a for-dummie language w/o all the terminologies!
Okay, let me try:
1) They are all event-driven things. (I hear the laugh, but read on)
If you don't know what event-driven is Then
think you place a button
on the page, hook it up w/ a function using "on-click", waiting for
users to click on it to trigger the actions you plant inside the
function. Or think of "trigger" of SQL Server / Oracle.
2) $watch is "on-click".
What's special about is it takes 2 functions as parameters, first one
gives the value from the event, second one takes the value into
consideration...
3) $digest is the boss who checks around tirelessly,
bla-bla-bla but a good boss.
4) $apply gives you the way when you want to do it manually, like a fail-proof (in case on-click doesn't kick in, you force it to run.)
Now, let's make it visual. Picture this to make it even more easy to
grab the idea:
In a restaurant,
- WAITERS
are supposed to take orders from customers, this is
$watch(
function(){return orders;},
function(){Kitchen make it;}
);
- MANAGER running around to make sure all waiters are awake, responsive to any sign of changes from customers. This is $digest()
- OWNER has the ultimate power to drive everyone upon request, this is $apply()
I have a download function, which has a promise called onProgress(which returns download percentage), I want to go to some other view and come back. Even though controller's scope is with proper data the page is not getting refreshed with new data.
Even with this vague description it sounds like the onProgress() function is not in "angular world". Therefore, any changes to $scope that you make in the promise callback will not be noticed by angular until the next digest cycle.
The solution is easy: inside the onProgress() promise callback, wrap your changes to $scope in $apply:
onProgress().then(function(percent)
{
$scope.$apply(function() {
// your changes to $scope here, so that angular notices them
}
}
I am new to AngularJS. Please see the code below and tell me what it is doing.
$scope.$on('$viewContentLoaded', function(event) {});
How to use it in a controller to access the DOM?
$timeout(function() { });
I am looking for explanation and example of how to use $scope.$on() and $timeout() in real life and what it does.
$scope.$on registers a listener for the event passed as the first parameter and executes the function passed as the second on each instance of said event. $broadcast and $emit can be used to send out custom events of your own.
$timeout can be used in place of setTimeout but when called with no delay argument will simply wait for the next digest before executing its callback function.
As for DOM manipulation, this should not be carried out in a standard 'jQuery like fashion'. If manipulation of the DOM is required a custom directive can be defined to encapsulate this functionality and therefore allow the Angular framework to govern its syncopation.
I found this code snippet which is part of a angular directive someone wrote for bootstrap modal.
//Update the visible value when the dialog is closed
//through UI actions (Ok, cancel, etc.)
element.bind("hide.bs.modal", function () {
scope.modalVisible = false;
if (!scope.$$phase && !scope.$root.$$phase)
scope.$apply();
});
I understood that this part is for the latter half of two way binding we bind to hide.bs.modal event and update modal when UI changes.
I just wanted to know why is the person checking $$phase for scope and rootScope before calling apply ?
Can't we straightaway call apply ?
What is $$phase here?
I tried searching a lot, couldn't find any good explanation.
EDIT:
I found where I saw the example:
Simple Angular Directive for Bootstrap Modal
$$phase is a flag set while angular is in a $digest cycle.
Sometimes (in rare cases), you want to check $$phase on the scope before doing an $apply. An error occurs if you try to $apply during a $digest:
Error: $apply already in progress
Davin is totally correct that it's a flag that angular sets during the digest cycle.
But don't use it in your code.
I recently got a chance to ask Misko (angular author) about $$phase, and he said to never use it; it's an internal implementation of the digest cycle, and it's not future safe.
To make sure your code continues to work in the future, he suggested wrapping whatever you want to "safe apply" inside of a $timeout
$timeout(function() {
// anything you want can go here and will safely be run on the next digest.
})
This comes up a lot when you have callbacks or other things that might resolve during the digest cycle (but don't always)
Here's an example snippet from when I was dealing with one of google's libraries: (The rest of the service this was from has been left off.)
window.gapi.client.load('oauth2', 'v2', function() {
var request = window.gapi.client.oauth2.userinfo.get();
request.execute(function(response) {
// This happens outside of angular land, so wrap it in a timeout
// with an implied apply and blammo, we're in action.
$timeout(function() {
if(typeof(response['error']) !== 'undefined'){
// If the google api sent us an error, reject the promise.
deferred.reject(response);
}else{
// Resolve the promise with the whole response if ok.
deferred.resolve(response);
}
});
});
});
Note that the delay argument for $timeout is optional and will default to 0 if left unset ($timeout calls $browser.defer which defaults to 0 if delay isn't set)
A little non-intuitive, but that's the answer from the guys writing Angular, so it's good enough for me!
In that example, the element binding will get executed from a non-angular event. In most cases, it is safe to just call $apply() without checking the phase.
If you look at the rest of the code, however, there is a $scope function called showModal(). This function calls into the non-angular code which will likely cause a "hide.bs.modal" event to fire. If the event fires via this route, then the call stack is within a $digest.
So, this event does fall within the rare case of a function that will get called from both angular-managed code AND non-angular code. Checking the $$phase in this case is necessary because you don't know how the event originated. If the $$phase is set to something, then the digest loop will finish to completion and $apply() doesn't need to be called.
This pattern is often referred to as "safe apply".
my understanding is it is good to use when digesting or applying the scope. If it is truthy it means that there is currently a $digest or $apply phase in progress. If you are getting related errors you can do $scope.$$phase || $scope.digest(); which will only digest if $scope.$$pahse is falsy.
You can use $scope.$evalAsync() method rather than using the $scope.$apply() externally with the $$phase value check as rightly suggested by #betaorbust:
I recently got a chance to ask Misko (angular author) about $$phase, and he said to never use it; it's an internal implementation of the digest cycle, and it's not future safe.
The good thing about $scope.$evalAsync() is that it gives you what you really want, get the fresh data up with the digest cycle, faster than even the $timeout can:
Up until now, my approach to deferred-$digest-invocation was to replace the $scope.$apply() call with the $timeout() service (which implicitly calls $apply() after a delay). But, yesterday, I discovered the $scope.$evalAsync() method. Both of these accomplish the same thing - they defer expression-evaluation until a later point in time. But, the $scope.$evalAsync() is likely to execute in the same tick of the JavaScript event loop.
Usage is quite simple:
$scope.$evalAsync(
function() {
// Call some method here OR
$scope.excutemyMethod();
// assign some value;
$scope.someVariable = "asd"
}
);
The method inside the $evalAsync() is added to the Async queue so that it can be executed in the following digest cycle by internally triggering $apply which is what we really want.
Also it includes the $timeout call to handle rarest of rare scenarios watching for the async queue length and waiting the tasks in the Async Queue to be executed to put your function in the execution cycle as soon as possible. Refer Ben Nadel blog, which explains this fact.
I don't understand how to use $scope.$watch and $scope.$apply. The official documentation isn't helpful.
What I don't understand specifically:
Are they connected to the DOM?
How can I update DOM changes to the model?
What is the connection point between them?
I tried this tutorial, but it takes the understanding of $watch and $apply for granted.
What do $apply and $watch do, and how do I use them appropriately?
You need to be aware about how AngularJS works in order to understand it.
Digest cycle and $scope
First and foremost, AngularJS defines a concept of a so-called digest cycle. This cycle can be considered as a loop, during which AngularJS checks if there are any changes to all the variables watched by all the $scopes. So if you have $scope.myVar defined in your controller and this variable was marked for being watched, then you are implicitly telling AngularJS to monitor the changes on myVar in each iteration of the loop.
A natural follow-up question would be: Is everything attached to $scope being watched? Fortunately, no. If you would watch for changes to every object in your $scope, then quickly a digest loop would take ages to evaluate and you would quickly run into performance issues. That is why the AngularJS team gave us two ways of declaring some $scope variable as being watched (read below).
$watch helps to listen for $scope changes
There are two ways of declaring a $scope variable as being watched.
By using it in your template via the expression <span>{{myVar}}</span>
By adding it manually via the $watch service
Ad 1)
This is the most common scenario and I'm sure you've seen it before, but you didn't know that this has created a watch in the background. Yes, it had! Using AngularJS directives (such as ng-repeat) can also create implicit watches.
Ad 2)
This is how you create your own watches. $watch service helps you to run some code when some value attached to the $scope has changed. It is rarely used, but sometimes is helpful. For instance, if you want to run some code each time 'myVar' changes, you could do the following:
function MyController($scope) {
$scope.myVar = 1;
$scope.$watch('myVar', function() {
alert('hey, myVar has changed!');
});
$scope.buttonClicked = function() {
$scope.myVar = 2; // This will trigger $watch expression to kick in
};
}
$apply enables to integrate changes with the digest cycle
You can think of the $apply function as of an integration mechanism. You see, each time you change some watched variable attached to the $scope object directly, AngularJS will know that the change has happened. This is because AngularJS already knew to monitor those changes. So if it happens in code managed by the framework, the digest cycle will carry on.
However, sometimes you want to change some value outside of the AngularJS world and see the changes propagate normally.
Consider this - you have a $scope.myVar value which will be modified within a jQuery's $.ajax() handler. This will happen at some point in future. AngularJS can't wait for this to happen, since it hasn't been instructed to wait on jQuery.
To tackle this, $apply has been introduced. It lets you start the digestion cycle explicitly. However, you should only use this to migrate some data to AngularJS (integration with other frameworks), but never use this method combined with regular AngularJS code, as AngularJS will throw an error then.
How is all of this related to the DOM?
Well, you should really follow the tutorial again, now that you know all this. The digest cycle will make sure that the UI and the JavaScript code stay synchronised, by evaluating every watcher attached to all $scopes as long as nothing changes. If no more changes happen in the digest loop, then it's considered to be finished.
You can attach objects to the $scope object either explicitly in the Controller, or by declaring them in {{expression}} form directly in the view.
Further readings:
Make Your Own AngularJS, Part 1: Scopes And Digest
In AngularJS, we update our models, and our views/templates update the DOM "automatically" (via built-in or custom directives).
$apply and $watch, both being Scope methods, are not related to the DOM.
The Concepts page (section "Runtime") has a pretty good explanation of the $digest loop, $apply, the $evalAsync queue and the $watch list. Here's the picture that accompanies the text:
Whatever code has access to a scope – normally controllers and directives (their link functions and/or their controllers) – can set up a "watchExpression" that AngularJS will evaluate against that scope. This evaluation happens whenever AngularJS enters its $digest loop (in particular, the "$watch list" loop). You can watch individual scope properties, you can define a function to watch two properties together, you can watch the length of an array, etc.
When things happen "inside AngularJS" – e.g., you type into a textbox that has AngularJS two-way databinding enabled (i.e., uses ng-model), an $http callback fires, etc. – $apply has already been called, so we're inside the "AngularJS" rectangle in the figure above. All watchExpressions will be evaluated (possibly more than once – until no further changes are detected).
When things happen "outside AngularJS" – e.g., you used bind() in a directive and then that event fires, resulting in your callback being called, or some jQuery registered callback fires – we're still in the "Native" rectangle. If the callback code modifies anything that any $watch is watching, call $apply to get into the AngularJS rectangle, causing the $digest loop to run, and hence AngularJS will notice the change and do its magic.
AngularJS extends this events-loop, creating something called AngularJS context.
$watch()
Every time you bind something in the UI you insert a $watch in a $watch list.
User: <input type="text" ng-model="user" />
Password: <input type="password" ng-model="pass" />
Here we have $scope.user, which is bound to the first input, and we have $scope.pass, which is bound to the second one. Doing this we add two $watches to the $watch list.
When our template is loaded, AKA in the linking phase, the compiler will look for every directive and creates all the $watches that are needed.
AngularJS provides $watch, $watchcollection and $watch(true). Below is a neat diagram explaining all the three taken from watchers in depth.
angular.module('MY_APP', []).controller('MyCtrl', MyCtrl)
function MyCtrl($scope,$timeout) {
$scope.users = [{"name": "vinoth"},{"name":"yusuf"},{"name":"rajini"}];
$scope.$watch("users", function() {
console.log("**** reference checkers $watch ****")
});
$scope.$watchCollection("users", function() {
console.log("**** Collection checkers $watchCollection ****")
});
$scope.$watch("users", function() {
console.log("**** equality checkers with $watch(true) ****")
}, true);
$timeout(function(){
console.log("Triggers All ")
$scope.users = [];
$scope.$digest();
console.log("Triggers $watchCollection and $watch(true)")
$scope.users.push({ name: 'Thalaivar'});
$scope.$digest();
console.log("Triggers $watch(true)")
$scope.users[0].name = 'Superstar';
$scope.$digest();
});
}
http://jsfiddle.net/2Lyn0Lkb/
$digest loop
When the browser receives an event that can be managed by the AngularJS context the $digest loop will be fired. This loop is made from two smaller loops. One processes the $evalAsync queue, and the other one processes the $watch list. The $digest will loop through the list of $watch that we have
app.controller('MainCtrl', function() {
$scope.name = "vinoth";
$scope.changeFoo = function() {
$scope.name = "Thalaivar";
}
});
{{ name }}
<button ng-click="changeFoo()">Change the name</button>
Here we have only one $watch because ng-click doesn’t create any watches.
We press the button.
The browser receives an event which will enter the AngularJS context
The $digest loop will run and will ask every $watch for changes.
Since the $watch which was watching for changes in $scope.name
reports a change, it will force another $digest loop.
The new loop reports nothing.
The browser gets the control back and it will update the DOM
reflecting the new value of $scope.name
The important thing here is that EVERY event that enters the AngularJS context will run a $digest loop. That means that every time we write a letter in an input, the loop will run checking every $watch in this page.
$apply()
If you call $apply when an event is fired, it will go through the angular-context, but if you don’t call it, it will run outside it. It is as easy as that. $apply will call the $digest() loop internally and it will iterate over all the watches to ensure the DOM is updated with the newly updated value.
The $apply() method will trigger watchers on the entire $scope chain whereas the $digest() method will only trigger watchers on the current $scope and its children. When none of the higher-up $scope objects need to know about the local changes, you can use $digest().
I found very in-depth videos which cover $watch, $apply, $digest and digest cycles in:
AngularJS - Understanding Watcher, $watch, $watchGroup, $watchCollection, ng-change
AngularJS - Understanding digest cycle (digest phase or digest process or digest loop)
AngularJS Tutorial - Understanding $apply and $digest (in depth)
Following are a couple of slides used in those videos to explain the concepts (just in case, if the above links are removed/not working).
In the above image, "$scope.c" is not being watched as it is not used in any of the data bindings (in markup). The other two ($scope.a and $scope.b) will be watched.
From the above image: Based on the respective browser event, AngularJS captures the event, performs digest cycle (goes through all the watches for changes), execute watch functions and update the DOM. If not browser events, the digest cycle can be manually triggered using $apply or $digest.
More about $apply and $digest:
There are $watchGroup and $watchCollection as well. Specifically, $watchGroup is really helpful if you want to call a function to update an object which has multiple properties in a view that is not dom object, for e.g. another view in canvas, WebGL or server request.
Here, the documentation link.
Just finish reading ALL the above, boring and sleepy (sorry but is true). Very technical, in-depth, detailed, and dry.
Why am I writing? Because AngularJS is massive, lots of inter-connected concepts can turn anyone going nuts. I often asked myself, am I not smart enough to understand them? No! It's because so few can explain the tech in a for-dummie language w/o all the terminologies!
Okay, let me try:
1) They are all event-driven things. (I hear the laugh, but read on)
If you don't know what event-driven is Then
think you place a button
on the page, hook it up w/ a function using "on-click", waiting for
users to click on it to trigger the actions you plant inside the
function. Or think of "trigger" of SQL Server / Oracle.
2) $watch is "on-click".
What's special about is it takes 2 functions as parameters, first one
gives the value from the event, second one takes the value into
consideration...
3) $digest is the boss who checks around tirelessly,
bla-bla-bla but a good boss.
4) $apply gives you the way when you want to do it manually, like a fail-proof (in case on-click doesn't kick in, you force it to run.)
Now, let's make it visual. Picture this to make it even more easy to
grab the idea:
In a restaurant,
- WAITERS
are supposed to take orders from customers, this is
$watch(
function(){return orders;},
function(){Kitchen make it;}
);
- MANAGER running around to make sure all waiters are awake, responsive to any sign of changes from customers. This is $digest()
- OWNER has the ultimate power to drive everyone upon request, this is $apply()