I'm trying to run the package from a SQL Server and pick up excel file from a common fileshare location. I get the following error-
"Package:Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has
occurred. Error code: 0x80004005. An OLE DB record is available.
Source: ""Microsoft Access Database Engine"" Hresult: 0x80004005
Description: ""The Microsoft Access database engine cannot open or
write to the file 'File Share location'. It is already opened
exclusively by another user, or you need permission to view and write
its data."".
I have confirmed that the file isnt open on the server on which the package is running from.
Any help regarding this would be appreciated
I got the same error, it turns out the other workstation was working on the file and not in 'read only' mode. the workstation has an ODBC excel file DSN setup.
If this is your case, you need got to the workstation's DSN setup , and make sure the 'read only' option is enabled.
Related
I am trying to import Excel sheet into SQL server through SSIS
The file was generated by SQL Server import task from another machine.
but when I try to run it the SSIS on my machine/Server
I get this error
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task 1 [Source - 'detail_report (4)$' [53]]: SSIS
Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The
AcquireConnection method call to the connection manager
"SourceConnectionExcel" failed with error code 0xC0209302. There may
be error messages posted before this with more information on why the
AcquireConnection method call failed.
Error at Data Flow Task 1 [SSIS.Pipeline]: Source - 'detail_report
(4)$' failed validation and returned error code 0xC020801C.
Error at Data Flow Task 1 [SSIS.Pipeline]: One or more component
failed validation.
Error at Data Flow Task 1: There were errors during task validation.
Error at MobUp02 [Connection manager "SourceConnectionExcel"]: The
requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered.
If the 32-bit driver is not installed, run the package in 64-bit mode.
Error code: 0x00000000. An OLE DB record is available. Source:
"Microsoft OLE DB Service Components" Hresult: 0x80040154
Description: "Class not registered".
Error at MobUp02 [Connection manager "SourceConnectionExcel"]: The
'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local
machine. For more information, see
http://go.microsoft.com/fwlink/?LinkId=219816
(Microsoft.DataTransformationServices.VsIntegration)
I googled that and changed Run64bitRuntime to False, yet problem still exist
Anyone know how to fix that??
The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered.
I think you should download the Access Database Engine 2010 32-bit:
Microsoft Access Database Engine 2010 Redistributable
Additional information
SSIS The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered
The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered
You can do 2 workarounds to solve importing excel using 64-bit ms office:
Using an OLEDB Source instead of Excel Source
Using SQL Server Import and Export Wizard
Check the following detailed article, it contains very helpful information:
Importing data from 64-bit Excel in SSIS
Try to install access runtime 2010 and if not solve then access runtime 2007. It may solve your error.
Select 32 Or 64 bit as per your system.
Try to Check the following:
Server BI Installed Version
Install same Excel version on your machine
Put Excel File on same path or Change Excel source File path with your machine path.
Select the Project (not the solution) in Solution Explorer window, then from the Visual Studio 2019 menu select:
Project -> Properties
The Property Pages window opens, then select:
Configuration Properties -> Debugging -> Debug Options -> Run64BitRuntime
Put that option on False and the error will disappear. It worked for me.
As I was also facing this issue and I resolved it by installing this "Microsoft Access Database Engine 2010" software
Below I am attaching the link to download that software you need to install in local as well as the server where that SSIS package will run
Link-Cick here to download Microsoft Access Database Engine 2010
When running SSIS package from the server, I get the following error
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "The Microsoft Access database engine cannot open or write to the file ''. It is already opened exclusively by another user, or you need permission to view and write its data."
The file is saved on a shared drive and no one is using this file at the moment.
I have SSIS package that import data from excel to SQL database 2012. the package runs fine and deliver what it supposed to do when I run it on visual studio. However when I try SQL job to run the package it keep giving me error massage below.
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error
code: 0x80004005. An OLE DB record is available. Source: "Microsoft
Access Database Engine" Hresult: 0x80004005 Description:
"'Q:\Ledger\MajorGL.xlsx' is not a valid path. Make sure that the path
name is spelled correctly and that you are connected to the server on
which the file resides.".
and the path is a valid path.
Make sure:
Machine were SQL Server is installed has access to path: Q:\Ledger\
User on which SSIS is running has access rights to the file MajorGL.xlsx
#zazzu-I think ,this is a password error with connection.Can u check with connections once again??
Just save the package and close the solution.Again open the solution and the package .Test the connections now.
Drive Q sounds like a network drive, you will need to change your SQL job to run with a user that has permissions to that location.
Go to the section called USING PROXIES in this article and set up your package to use execute using this proxy.
I have successfully connected Informix connection in my SSIS connection manager so there should be no problem in Informix Service Provider Configuration in my 32-bit Windows machine. After creating connection, I opened OLE DB Source with Informix Service Provider, and in Data access mode, I selected SQL Command and used "select * from informix table". But when I click Cloumns view or Ok button its throughing error
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Source [1]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0202009 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
I'm sure this table is existing in the connected Informix DB. I tried to fix this issue but failed. Can anyone help me to fix this issue?
Keep in mind that even if you're connecting through OLEDB it's going to access informix through ODBC protocol. Ensure that you have the right drivers for 32 bit informix thru IBM (link below). If you're still having issues after installing those drivers and rebooting it would be best to set up an ODBC connection on your box (and the server running it once deployed). It'll be saving you one layer of data access anyway.
http://www14.software.ibm.com/webapp/download/search.jsp?q=&pf=&S_TACT=&S_CMP=&status=Active&sr=1&cat=&q0=&k=ALL&b=&pn=&pid=&rs=ifxdl&fpf=Windows+2000&fdt=&flang=&sb=ra&ibm-go.x=10&ibm-go.y=15
I have an SSIS package that imports an excel spreadsheet into an SQL Server 2008 database.
I have an Excel connection in the Connection Managers tab and it points to an Excel file on my local computer.
But when I open the Excel Source in Data Flow, if I try to view columns or change the "Name of Excel sheet:" I get this error.
Error at LoadMasterData [Connection manager "SourceConnectionExcel"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Error at Data Flow Task 1 [Source - Sheet1$ [1]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
The package was saved from SQL Server Management Studio using Import Data. When I run the package it works fine but I want to be able to specify the spreadsheet name as a variable. When I change the option to specify the sheet name as a variable, it won't let me close the window with the "OK" button, and just keeps giving me the same error as above.
Has anyone experienced this behaviour before that can help me get this working?
Thanks
Are you running on 32bit or 64bit? if you're on 64bit you need to know that there are no providers for Excel - you'll have to enforce the package to not use 64bit. Right click project, properties, debugging: Run64BitRuntime - set to false.