I have this batch file
SETLOCAL ENABLEDELAYEDEXPANSION
SET count=1
FOR /F "tokens=* USEBACKQ" %%F IN (`find "# STATISTICS ON CLIENT_JE_AMT EY_ENT_DATE EY_EFF_DATE" "z_B10_VALIDATION.LOG"`) DO (
SET var!count!=%%F
SET /a count=!count!+1
)
ECHO %var1%
ECHO %var2%
for /f "tokens=1 delims=:" %%i in ("%var2%") do (
set stat_line_start=%%i
)
echo %stat_line_start%
set /a stat_line_end=!stat_line_start!+3
for /L %%j in (%stat_line_start%,1,%stat_line_end%) do (
echo %%j
set k=%%j
set cfirst=%k:~0,1%
set csec=%k:~1,1%
set cthird=%k:~2,1%
findstr /B "[%cfirst%-%cfirst%][%csec%-%csec%][%cthird%-%cthird%]:" "z_B10_VALIDATION.LOG">> z_STATS.txt
)
ENDLOCAL
when i run this, I am getting the correct value for variable "k" but having error on "cfirst", "csec" and "cthird" variable.
sample result line :
set k=254
set cfirst=~0,1
instead of
set cfirst=2
I am new on this field and just starting to explore. Hope you can help me.
Thank you in advance.
CMD expands variables when the command is parsed, not when it is run.
Because code blocks (i.e. chunks of code suurrounded by parentheses - like multi-line if statements and for loops) are considered a single command by the interepreter, any variables that you set inside of the block are set to the default value: nothing.
You can delay this expansion to runtime with the command setlocal enabledelayedexpansion (which you already included at the top of your code) and using the !variable! syntax instead of the %variable% syntax.
I've got this code on a batch file:
setlocal EnableDelayedExpansion
set var=0
for /f "tokens=*" %%a in (kim.txt) do (
set /a var+=1
echo Line %var%
)
But %var% don't seem to increment, it's always at zero. Tried different aproaches without any luck.
Under delayed expansion you need to access your variables (in case their value changes within brackets context) with ! instead of % :
setlocal EnableDelayedExpansion
set var=0
for /f "tokens=*" %%a in (kim.txt) do (
set /a var+=1
echo Line !var!
)
Alright, so let's say we have a file called start.cmd
#echo off
set value=1
for /D %%a in (%*) do (
echo %%a
)
start.cmd is called by
start.cmd ^%value^% ^%anothervalue^%
The for loop would, of course, take %1, and %2, and so forth.
My question is:
EDIT: How can I escape a value within another value?
I make a guess:
You want to expand the variables just in the for loop, not before.
With your case you only need to add a CALL, as it starts the parser a second time, so it can expand the %value% before it echo it.
#echo off
set value=1
for /D %%a in (%*) do (
call echo %%a
)
But better is to use delayed expansion here
#echo off
setlocal EnableDelayedExpansion
set value=1
for /D %%a in (%*) do (
echo %%a
)
Then you can start your batch with
start.cmd !value! !anothervalue!
This works as delayed expansion is done after the percent expansion by the parser, so %* is expanded to !value! !anothervalue! and then it's expanded to 1 xyz
I made this code
dir /B /S %RepToRead% > %FileName%
for /F "tokens=*" %%a in ('type %FileName%') do (
set z=%%a
echo %z%
echo %%a
)
echo %%a is working fine but echo %z% returns "echo disabled".
I need to set a %z% because I want to split the variable like %z:~7%
Any ideas?
There are two methods to setting and using variables within for loops and parentheses scope.
setlocal enabledelayedexpansion see setlocal /? for help. This only works on XP/2000 or newer versions of Windows.
then use !variable! instead of %variable% inside the loop...
Create a batch function using batch goto labels :Label.
Example:
for /F "tokens=*" %%a in ('type %FileName%') do call :Foo %%a
goto End
:Foo
set z=%1
echo %z%
echo %1
goto :eof
:End
Batch functions are very useful mechanism.
You probably want SETLOCAL ENABLEDELAYEDEXPANSION. See https://devblogs.microsoft.com/oldnewthing/20060823-00/?p=29993 for details.
Basically: Normal %variables% are expanded right aftercmd.exe reads the command. In your case the "command" is the whole
for /F "tokens=*" %%a in ('type %FileName%') do (
set z=%%a
echo %z%
echo %%a
)
loop. At that point z has no value yet, so echo %z% turns into echo. Then the loop is executed and z is set, but its value isn't used anymore.
SETLOCAL ENABLEDELAYEDEXPANSION enables an additional syntax, !variable!. This also expands variables but it only does so right before each (sub-)command is executed.
SETLOCAL ENABLEDELAYEDEXPANSION
for /F "tokens=*" %%a in ('type %FileName%') do (
set z=%%a
echo !z!
echo %%a
)
This gives you the current value of z each time the echo runs.
I struggeld for many hours on this.
This is my loop to register command line vars.
Example : Register.bat /param1:value1 /param2:value2
What is does, is loop all the commandline params,
and that set the variable with the proper name to the value.
After that, you can just use
set value=!param1!
set value2=!param2!
regardless the sequence the params are given. (so called named parameters).
Note the !<>!, instead of the %<>%.
SETLOCAL ENABLEDELAYEDEXPANSION
FOR %%P IN (%*) DO (
call :processParam %%P
)
goto:End
:processParam [%1 - param]
#echo "processparam : %1"
FOR /F "tokens=1,2 delims=:" %%G IN ("%1") DO (
#echo a,b %%G %%H
set nameWithSlash=%%G
set name=!nameWithSlash:~1!
#echo n=!name!
set value=%%H
set !name!=!value!
)
goto :eof
:End
Simple example of batch code using %var%, !var!, and %%.
In this example code, focus here is that we want to capture a start time using the built in variable TIME (using time because it always changes automatically):
Code:
#echo off
setlocal enabledelayedexpansion
SET "SERVICES_LIST=MMS ARSM MMS2"
SET START=%TIME%
SET "LAST_SERVICE="
for %%A in (%SERVICES_LIST%) do (
SET START=!TIME!
CALL :SOME_FUNCTION %%A
SET "LAST_SERVICE=%%A"
ping -n 5 127.0.0.1 > NUL
SET OTHER=!START!
if !OTHER! EQU !START! (
echo !OTHER! is equal to !START! as expected
) ELSE (
echo NOTHING
)
)
ECHO Last service run was %LAST_SERVICE%
:: Function declared like this
:SOME_FUNCTION
echo Running: %1
EXIT /B 0
Comments on code:
Use enabledelayedexpansion
The first three SET lines are typical
uses of the SET command, use this most of the time.
The next line is a for loop, must use %%A for iteration, then %%B if a loop inside it
etc.. You can not use long variable names.
To access a changed variable such as the time variable, you must use !! or set with !! (have enableddelayexpansion enabled).
When looping in for loop each iteration is accessed as the %%A variable.
The code in the for loop is point out the various ways to set a variable. Looking at 'SET OTHER=!START!', if you were to change to SET OTHER=%START% you will see why !! is needed. (hint: you will see NOTHING) output.
In short !! is more likely needed inside of loops, %var% in general, %% always a for loop.
Further reading
Use the following links to determine why in more detail:
Difference between %variable% and !variable! in batch file
Variable usage in batch file
To expand on the answer I came here to get a better understanding so I wrote this that can explain it and helped me too.
It has the setlocal DisableDelayedExpansion in there so you can locally set this as you wish between the setlocal EnableDelayedExpansion and it.
#echo off
title %~nx0
for /f "tokens=*" %%A in ("Some Thing") do (
setlocal EnableDelayedExpansion
set z=%%A
echo !z! Echoing the assigned variable in setlocal scope.
echo %%A Echoing the variable in local scope.
setlocal DisableDelayedExpansion
echo !z! &rem !z! Neither of these now work, which makes sense.
echo %z% &rem ECHO is off. Neither of these now work, which makes sense.
echo %%A Echoing the variable in its local scope, will always work.
)
set list = a1-2019 a3-2018 a4-2017
setlocal enabledelayedexpansion
set backup=
set bb1=
for /d %%d in (%list%) do (
set td=%%d
set x=!td!
set y=!td!
set y=!y:~-4!
if !y! gtr !bb1! (
set bb1=!y!
set backup=!x!
)
)
rem: backup will be 2019
echo %backup%
Try this:
setlocal EnableDelayedExpansion
...
for /F "tokens=*" %%a in ('type %FileName%') do (
set z=%%a
echo !z!
echo %%a
)
You can use a macro if you access a variable outside the scope
#echo off
::Define macro
set "sset=set"
for /l %%a in (1,1,4) do (
::set in loop
%sset% /a "x[%%a]=%%a*%%a"
if %%a equ 4 (
:: set in condition
%sset% "x[%%a]=x Condition"
%sset% "y=y Condition"
)
)
echo x1=%x[1]% x2=%x[2]% x3=%x[3]% x4=%x[4]% y=%y%
:: Bonus. enableDelayedExpansion used to access massive from the loop
setlocal enableDelayedExpansion
echo Echo from the loop
for /l %%a in (1,1,4) do (
::echo in one line - echo|set /p =
echo|set /p "=x%%a=!x[%%a]! "
if %%a equ 4 echo y=%y%
)
pause
I know this isn't what's asked but I benefited from this method, when trying to set a variable within a "loop". Uses an array. Alternative implementation option.
SETLOCAL ENABLEDELAYEDEXPANSION
...
set Services[0]=SERVICE1
set Services[1]=SERVICE2
set Services[2]=SERVICE3
set "i=0"
:ServicesLoop
if defined Services[%i%] (
set SERVICE=!Services[%i%]!
echo CurrentService: !SERVICE!
set /a "i+=1"
GOTO :ServicesLoop
)
The following should work:
setlocal EnableDelayedExpansion
for /F "tokens=*" %%a in ('type %FileName%') do (
set "z=%%a"
echo %z%
echo %%a
)
When I was testing a script I came across this issue when trying to extract characters from a string using batch. I have simplified it into a simple example. t.txt just contains the word hello.
#echo off
setlocal enabledelayedexpansion
set a=0
set b=1
for /f %%a in (t.txt) do (
set x=%%a
echo !x:~!a!,!b!!
set /a x+=1
)
pause >nul
The problem is, the variable x needs to be accessed using delayed expansion, and because I am updating the values of a and b through the loop these also need to be accessed using delayed expansion.
When trying to use the variables a and b to split the string they all need delayed expansion, but the order of the ! marks means that it is not parsed the way I intended!
CMD will expand my command as !x:~!, !,! and !!, instead of expanding the inner ones first. Obviously I can't use %'s either.
The only way I have found to get around this is to call an external function that isn't in the loop, so I can use %'s.
#echo off
setlocal enabledelayedexpansion
set a=0
set b=1
set v=
for /f %%a in (t.txt) do (
set x=%%a
call :RETURN x
set /a x+=1
)
pause >nul
:RETURN
set v=%1
echo %v:~!a!,!b!%
Is there any way of getting cmd to parse my command how I need it to, or this just a limitation I will have to use call for?
Simply transfer variables a and b to FOR variables.
#echo off
setlocal enabledelayedexpansion
set a=0
set b=1
for /f %%a in (t.txt) do (
set "x=%%a"
for /f "tokens=1,2" %%A in ("%a% %b%") do echo !x:~%%A,%%B!
REM this line makes no sense if x=hello: set /a x+=1
)
pause >nul
Mixing delayed and normal expansion will work.
#echo off
setlocal EnableDelayedExpansion
set a=0
set b=1
for /f %%L in (t.txt) do (
set "x=%%L"
echo !x:~%A%,%B%!
)