Related
char *cp = (char *) malloc(1);
strcpy(cp, "123456789");
puts(cp);
output is "123456789" on both gcc (Linux) and Visual C++ Express, does that mean when there is free memory, I can actually use more than what I've allocated with malloc()?
and why malloc(0) doesn't cause runtime error?
Thanks.
You've asked a very good question and maybe this will whet your appetite about operating systems. Already you know you've managed to achieve something with this code that you wouldn't ordinarily expect to do. So you would never do this in code you want to make portable.
To be more specific, and this depends entirely on your operating system and CPU architecture, the operating system allocates "pages" of memory to your program - typically this can be in the order of 4 kilobytes. The operating system is the guardian of pages and will immediately terminate any program that attempts to access a page it has not been assigned.
malloc, on the other hand, is not an operating system function but a C library call. It can be implemented in many ways. It is likely that your call to malloc resulted in a page request from the operating system. Then malloc would have decided to give you a pointer to a single byte inside that page. When you wrote to the memory from the location you were given you were just writing in a "page" that the operating system had granted your program, and thus the operating system will not see any wrong doing.
The real problems, of course, will begin when you continue to call malloc to assign more memory. It will eventually return pointers to the locations you just wrote over. This is called a "buffer overflow" when you write to memory locations that are legal (from an operating system perspective) but could potentially be overwriting memory another part of the program will also be using.
If you continue to learn about this subject you'll begin to understand how programs can be exploited using such "buffer overflow" techniques - even to the point where you begin to write assembly language instructions directly into areas of memory that will be executed by another part of your program.
When you get to this stage you'll have gained much wisdom. But please be ethical and do not use it to wreak havoc in the universe!
PS when I say "operating system" above I really mean "operating system in conjunction with privileged CPU access". The CPU and MMU (memory management unit) triggers particular interrupts or callbacks into the operating system if a process attempts to use a page that has not been allocated to that process. The operating system then cleanly shuts down your application and allows the system to continue functioning. In the old days, before memory management units and privileged CPU instructions, you could practically write anywhere in memory at any time - and then your system would be totally at the mercy of the consequences of that memory write!
No. You get undefined behavior. That means anything can happen, from it crashing (yay) to it "working" (boo), to it reformatting your hard drive and filling it with text files that say "UB, UB, UB..." (wat).
There's no point in wondering what happens after that, because it depends on your compiler, platform, environment, time of day, favorite soda, etc., all of which can do whatever they want as (in)consistently as they want.
More specifically, using any memory you have not allocated is undefined behavior. You get one byte from malloc(1), that's it.
When you ask malloc for 1 byte, it will probably get 1 page (typically 4KB) from the operating system. This page will be allocated to the calling process so as long as you don't go out of the page boundary, you won't have any problems.
Note, however, that it is definitely undefined behavior!
Consider the following (hypothetical) example of what might happen when using malloc:
malloc(1)
If malloc is internally out of memory, it will ask the operating system some more. It will typically receive a page. Say it's 4KB in size with addresses starting at 0x1000
Your call returns giving you the address 0x1000 to use. Since you asked for 1 byte, it is defined behavior if you only use the address 0x1000.
Since the operating system has just allocated 4KB of memory to your process starting at address 0x1000, it will not complain if you read/write something from/to addresses 0x1000-0x1fff. So you can happily do so but it is undefined behavior.
Let's say you do another malloc(1)
Now malloc still has some memory left so it doesn't need to ask the operating system for more. It will probably return the address 0x1001.
If you had written to more than 1 byte using the address given from the first malloc, you will get into troubles when you use the address from the second malloc because you will overwrite the data.
So the point is you definitely get 1 byte from malloc but it might be that malloc internally has more memory allocated to you process.
No. It means that your program behaves badly. It writes to a memory location that it does not own.
You get undefined behavior - anything can happen. Don't do it and don't speculate about whether it works. Maybe it corrupts memory and you don't see it immediately. Only access memory within the allocated block size.
You may be allowed to use until the memory reaches some program memory or other point at which your applicaiton will most likely crash for accessing protected memory
So many responses and only one that gives the right explanation. While the page size, buffer overflow and undefined behaviour stories are true (and important) they do not exactly answer the original question. In fact any sane malloc implementation will allocate at least in size of the alignment requirement of an intor a void *. Why, because if it allocated only 1 byte then the next chunk of memory wouldn't be aligned anymore. There's always some book keeping data around your allocated blocks, these data structures are nearly always aligned to some multiple of 4. While some architectures can access words on unaligned addresses (x86) they do incure some penalties for doing that, so allocator implementer avoid that. Even in slab allocators there's no point in having a 1 byte pool as small size allocs are rare in practice. So it is very likely that there's 4 or 8 bytes real room in your malloc'd byte (this doesn't mean you may use that 'feature', it's wrong).
EDIT: Besides, most malloc reserve bigger chunks than asked for to avoid to many copy operations when calling realloc. As a test you can try using realloc in a loop with growing allocation size and compare the returned pointer, you will see that it changes only after a certain threshold.
You just got lucky there. You are writing to locations which you don't own this leads to undefined behavior.
On most platforms you can not just allocate one byte. There is often also a bit of housekeeping done by malloc to remember the amount of allocated memory. This yields to the fact that you usually "allocate" memory rounded up to the next 4 or 8 bytes. But this is not a defined behaviour.
If you use a few bytes more you'll very likeley get an access violation.
To answer your second question, the standard specifically mandates that malloc(0) be legal. Returned value is implementation-dependent, and can be either NULL or a regular memory address. In either case, you can (and should) legally call free on the return value when done. Even when non-NULL, you must not access data at that address.
malloc allocates the amount of memory you ask in heap and then return a pointer to void (void *) that can be cast to whatever you want.
It is responsibility of the programmer to use only the memory that has been allocate.
Writing (and even reading in protected environment) where you are not supposed can cause all sort of random problems at execution time. If you are lucky your program crash immediately with an exception and you can quite easily find the bug and fix it. If you aren't lucky it will crash randomly or produce unexpected behaviors.
For the Murphy's Law, "Anything that can go wrong, will go wrong" and as a corollary of that, "It will go wrong at the right time, producing the most large amount of damage".
It is sadly true. The only way to prevent that, is to avoid that in the language that you can actually do something like that.
Modern languages do not allow the programmer to do write in memory where he/she is not supposed (at least doing standard programming). That is how Java got a lot of its traction. I prefer C++ to C. You can still make damages using pointers but it is less likely. That is the reason why Smart Pointers are so popular.
In order to fix these kind of problems, a debug version of the malloc library can be handy. You need to call a check function periodically to sense if the memory was corrupted.
When I used to work intensively on C/C++ at work, we used Rational Purify that in practice replace the standard malloc (new in C++) and free (delete in C++) and it is able to return quite accurate report on where the program did something it was not supposed. However you will never be sure 100% that you do not have any error in your code. If you have a condition that happen extremely rarely, when you execute the program you may not incur in that condition. It will eventually happen in production on the most busy day on the most sensitive data (according to Murphy's Law ;-)
It could be that you're in Debug mode, where a call to malloc will actually call _malloc_dbg. The debug version will allocate more space than you have requested to cope with buffer overflows. I guess that if you ran this in Release mode you might (hopefully) get a crash instead.
You should use new and delete operators in c++... And a safe pointer to control that operations doesn't reach the limit of the array allocated...
There is no "C runtime". C is glorified assembler. It will happily let you walk all over the address space and do whatever you want with it, which is why it's the language of choice for writing OS kernels. Your program is an example of a heap corruption bug, which is a common security vulnerability. If you wrote a long enough string to that address, you'd eventually overrun the end of the heap and get a segmentation fault, but not before you overwrote a lot of other important things first.
When malloc() doesn't have enough free memory in its reserve pool to satisfy an allocation, it grabs pages from the kernel in chunks of at least 4 kb, and often much larger, so you're probably writing into reserved but un-malloc()ed space when you initially exceed the bounds of your allocation, which is why your test case always works. Actually honoring allocation addresses and sizes is completely voluntary, so you can assign a random address to a pointer, without calling malloc() at all, and start working with that as a character string, and as long as that random address happens to be in a writable memory segment like the heap or the stack, everything will seem to work, at least until you try to use whatever memory you were corrupting by doing so.
strcpy() doesn't check if the memory it's writing to is allocated. It just takes the destination address and writes the source character by character until it reaches the '\0'. So, if the destination memory allocated is smaller than the source, you just wrote over memory. This is a dangerous bug because it is very hard to track down.
puts() writes the string until it reaches '\0'.
My guess is that malloc(0) only returns NULL and not cause a run-time error.
My answer is in responce to Why does printf not seg fault or produce garbage?
From
The C programming language by Denis Ritchie & Kernighan
typedef long Align; /* for alignment to long boundary */
union header { /* block header */
struct {
union header *ptr; /* next block if on free list */
unsigned size; /* size of this block */
} s;
Align x; /* force alignment of blocks */
};
typedef union header Header;
The Align field is never used;it just forces each header to be aligned on a worst-case boundary.
In malloc,the requested size in characters is rounded up to the proper number of header-sized units; the block that will be allocated contains
one more unit, for the header itself, and this is the value recorded in the
size field of the header.
The pointer returned by malloc points at the free space, not at the header itself.
The user can do anything with the space requested, but if anything is written outside of the allocated space the list is likely to be scrambled.
-----------------------------------------
| | SIZE | |
-----------------------------------------
| |
points to |-----address returned touser
next free
block
-> a block returned by malloc
In statement
char* test = malloc(1);
malloc() will try to search consecutive bytes from the heap section of RAM if requested bytes are available and it returns the address as below
--------------------------------------------------------------
| free memory | memory in size allocated for user | |
----------------------------------------------------------------
0x100(assume address returned by malloc)
test
So when malloc(1) executed it won't allocate just 1 byte, it allocated some extra bytes to maintain above structure/heap table. you can find out how much actual memory allocated when you requested only 1 byte by printing test[-1] because just to before that block contain the size.
char* test = malloc(1);
printf("memory allocated in bytes = %d\n",test[-1]);
If the size passed is zero, and ptr is not NULL then the call is equivalent to free.
This question already has answers here:
Closed 10 years ago.
Possible Duplicate:
behaviour of malloc(0)
I'm trying to understand memory allocation in C. So I am experimenting with malloc. I allotted 0 bytes for this pointer but yet it can still hold an integer. As a matter of fact, no matter what number I put into the parameter of malloc, it can still hold any number I give it. Why is this?
#include <stdio.h>
#include <stdlib.h>
int main(void)
{
int *ptr = (int*)malloc(0);
*ptr = 9;
printf("%i", *ptr); // 9
free(ptr);
return 0;
}
It still prints 9, what's up with that?
If size is 0, then malloc() returns either NULL, or a unique pointer
value that can later be successfully passed to free().
I guess you are hitting the 2nd case.
Anyway that pointer just by mistake happens to be in an area where you can write without generating segmentation fault, but you are probably writing in the space of some other variable messing up its value.
A lot of good answers here. But it is definitely undefined behavior. Some people declare that undefined behavior means that purple dragons may fly out of your computer or something like that... there's probably some history behind that outrageous claim that I'm missing, but I promise you that purple dragons won't appear regardless of what the undefined behavior will be.
First of all, let me mention that in the absence of an MMU, on a system without virtual memory, your program would have direct access to all of the memory on the system, regardless of its address. On a system like that, malloc() is merely the guy who helps you carve out pieces of memory in an ordered manner; the system can't actually enforce you to use only the addresses that malloc() gave you. On a system with virtual memory, the situation is slightly different... well, ok, a lot different. But within your program, any code in your program can access any part of the virtual address space that's mapped via the MMU to real physical memory. It doesn't matter whether you got an address from malloc() or whether you called rand() and happened to get an address that falls in a mapped region of your program; if it's mapped and not marked execute-only, you can read it. And if it isn't marked read-only, you can write it as well. Yes. Even if you didn't get it from malloc().
Let's consider the possibilities for the malloc(0) undefined behavior:
malloc(0) returns NULL.
OK, this is simple enough. There really is a physical address 0x00000000 in most computers, and even a virtual address 0x00000000 in all processes, but the OS intentionally doesn't map any memory to that address so that it can trap null pointer accesses. There's a whole page (generally 4KB) there that's just never mapped at all, and maybe even much more than 4KB. Therefore if you try to read or write through a null pointer, even with an offset from it, you'll hit these pages of virtual memory that aren't even mapped, and the MMU will throw an exception (a hardware exception, or interrupt) that the OS catches, and it declares a SIGSEGV (on Linux/Unix), or an illegal access (on Windows).
malloc(0) returns a valid address to previously unallocated memory of the smallest allocable unit.
With this, you actually get a real piece of memory that you can legally call your own, of some size you don't know. You really shouldn't write anything there (and probably not read either) because you don't know how big it is, and for that matter, you don't know if this is the particular case you're experiencing (see the following cases). If this is the case, the block of memory you were given is almost guaranteed to be at least 4 bytes and probably is 8 bytes or perhaps even larger; it all depends on whatever the size is of your implementation's minimum allocable unit.
malloc(0) intentionally returns the address of an unmapped page of
memory other than NULL.
This is probably a good option for an implementation, as it would allow you or the system to track & pair together malloc() calls with their corresponding free() calls, but in essence, it's the same as returning NULL. If you try to access (read/write) via this pointer, you'll crash (SEGV or illegal access).
malloc(0) returns an address in some other mapped page of memory
that may be used by "someone else".
I find it highly unlikely that a commercially-available system would take this route, as it serves to simply hide bugs rather than bring them out as soon as possible. But if it did, malloc() would be returning a pointer to somewhere in memory that you do not own. If this is the case, sure, you can write to it all you want, but you'd be corrupting some other code's memory, though it would be memory in your program's process, so you can be assured that you're at least not going to be stomping on another program's memory. (I hear someone getting ready to say, "But it's UB, so technically it could be stomping on some other program's memory. Yes, in some environments, like an embedded system, that is right. No modern commercial OS would let one process have access to another process's memory as easily as simply calling malloc(0) though; in fact, you simply can't get from one process to another process's memory without going through the OS to do it for you.) Anyway, back to reality... This is the one where "undefined behavior" really kicks in: If you're writing to "someone else's memory" (in your own program's process), you'll be changing the behavior of your program in difficult-to-predict ways. Knowing the structure of your program and where everything is laid out in memory, it's fully predictable. But from one system to another, things would be laid out in memory (appearing a different locations in memory), so the effect on one system would not necessarily be the same as the effect on another system, or on the same system at a different time.
And finally.... No, that's it. There really, truly, are only those four
possibilities. You could argue for special-case subset points for
the last two of the above, but the end result will be the same.
For one thing, your compiler may be seeing these two lines back to back and optimizing them:
*ptr = 9;
printf("%i", *ptr);
With such a simplistic program, your compiler may actually be optimizing away the entire memory allocate/free cycle and using a constant instead. A compiler-optimized version of your program could end up looking more like simply:
printf("9");
The only way to tell if this is indeed what is happening is to examine the assembly that your compiler emits. If you're trying to learn how C works, I recommend explicitly disabling all compiler optimizations when you build your code.
Regarding your particular malloc usage, remember that you will get a NULL pointer back if allocation fails. Always check the return value of malloc before you use it for anything. Blindly dereferencing it is a good way to crash your program.
The link that Nick posted gives a good explanation about why malloc(0) may appear to work (note the significant difference between "works" and "appears to work"). To summarize the information there, malloc(0) is allowed to return either NULL or a pointer. If it returns a pointer, you are expressly forbidden from using it for anything other than passing it to free(). If you do try to use such a pointer, you are invoking undefined behavior and there's no way to tell what will happen as a result. It may appear to work for you, but in doing so you may be overwriting memory that belongs to another program and corrupting their memory space. In short: nothing good can happen, so leave that pointer alone and don't waste your time with malloc(0).
The answer to the malloc(0)/free() calls not crashing you can find here:
zero size malloc
About the *ptr = 9, is just like overflowing a buffer (like malloc'ing 10 bytes and access the 11th), you are writing to memory you don't own, and doing that is looking for trouble. In this particular implementation malloc(0) happens to return a pointer instead of NULL.
Bottom line, it is wrong even if it seems to work on a simple case.
Some memory allocators have the notion of "minimum allocatable size". So, even if you pass zero, this will return pointer to the memory of word-size, for example. You need to check up with your system allocator documentation. But if it does return pointer to some memory it'd be wrong to rely on it as the pointer is only supposed to be passed either to be passed realloc() or free().
free(str);
printf("%d\n", str->listeners);
The call to printf succeeds (as do any other calls to str's members). How is this possible?
Here's an analogy for you: imagine you're renting an apartment (that's the memory) and you terminate your lease but keep a duplicate of the key (that's the pointer). You might be able to get back into the apartment later if it hasn't been torn down, if the locks haven't been changed, etc. and if you do it right away you might find things the way you left them. But it's a pretty bad idea, and in the likely case you're going to get yourself in a heap of trouble...
You're just (un)lucky. That code exhibits undefined behavior - anything can happen, including looking like the memory wasn't freed.
The memory is freed, but there is no point in actively clearing it, so its original content is likely to still be there. But you can't rely on that.
That is called undefined behavior. You are dereferencing a pointer which refers to deallocated memory. Anything can happen, i.e., one cannot assume that the program will crash or anything else; the behavior is undefined.
as long as str is not NULL and the corresponding memory has not been overwritten by some other allocation it it still works because the memory content is not changed by free (if the runtime doesn't overwrite the memory area on free). BUT this is definetly undefined behaviour and you CANNOT rely on it to work this way...
Things to keep in mind...
On virtually all current operating systems, free() never returns
memory to the operating system. Even if it's theoretically capable of
that, it would almost never actually happen. This is because memory can
only be returned in aligned pages of, generally, 4kB, because that's how
the MMU works, and, should one be found, ripping it out would likely
fragment a block that included memory above and below it, making the
entire process counterproductive. (Fragmentation is the enemy of efficient use of dynamic memory.)
Also, most program just generally
use more memory, so the time spent searching for something to really
return to the OS would be totally wasted. If it's not given back to the
OS and then protected, it won't core your program when you touch it.
So instead, what happens is
that the block you gave to free is just put on a list or some other
data structure, then possibly merged into blocks above or below it.
The memory is still there and accessible. Some of the block may be
overwritten with pointers and other internals of the library code
behind malloc() and free(). But it might not be.
Eventually it may be
handed back elsewhere in your program. But it might not be.
char *cp = (char *) malloc(1);
strcpy(cp, "123456789");
puts(cp);
output is "123456789" on both gcc (Linux) and Visual C++ Express, does that mean when there is free memory, I can actually use more than what I've allocated with malloc()?
and why malloc(0) doesn't cause runtime error?
Thanks.
You've asked a very good question and maybe this will whet your appetite about operating systems. Already you know you've managed to achieve something with this code that you wouldn't ordinarily expect to do. So you would never do this in code you want to make portable.
To be more specific, and this depends entirely on your operating system and CPU architecture, the operating system allocates "pages" of memory to your program - typically this can be in the order of 4 kilobytes. The operating system is the guardian of pages and will immediately terminate any program that attempts to access a page it has not been assigned.
malloc, on the other hand, is not an operating system function but a C library call. It can be implemented in many ways. It is likely that your call to malloc resulted in a page request from the operating system. Then malloc would have decided to give you a pointer to a single byte inside that page. When you wrote to the memory from the location you were given you were just writing in a "page" that the operating system had granted your program, and thus the operating system will not see any wrong doing.
The real problems, of course, will begin when you continue to call malloc to assign more memory. It will eventually return pointers to the locations you just wrote over. This is called a "buffer overflow" when you write to memory locations that are legal (from an operating system perspective) but could potentially be overwriting memory another part of the program will also be using.
If you continue to learn about this subject you'll begin to understand how programs can be exploited using such "buffer overflow" techniques - even to the point where you begin to write assembly language instructions directly into areas of memory that will be executed by another part of your program.
When you get to this stage you'll have gained much wisdom. But please be ethical and do not use it to wreak havoc in the universe!
PS when I say "operating system" above I really mean "operating system in conjunction with privileged CPU access". The CPU and MMU (memory management unit) triggers particular interrupts or callbacks into the operating system if a process attempts to use a page that has not been allocated to that process. The operating system then cleanly shuts down your application and allows the system to continue functioning. In the old days, before memory management units and privileged CPU instructions, you could practically write anywhere in memory at any time - and then your system would be totally at the mercy of the consequences of that memory write!
No. You get undefined behavior. That means anything can happen, from it crashing (yay) to it "working" (boo), to it reformatting your hard drive and filling it with text files that say "UB, UB, UB..." (wat).
There's no point in wondering what happens after that, because it depends on your compiler, platform, environment, time of day, favorite soda, etc., all of which can do whatever they want as (in)consistently as they want.
More specifically, using any memory you have not allocated is undefined behavior. You get one byte from malloc(1), that's it.
When you ask malloc for 1 byte, it will probably get 1 page (typically 4KB) from the operating system. This page will be allocated to the calling process so as long as you don't go out of the page boundary, you won't have any problems.
Note, however, that it is definitely undefined behavior!
Consider the following (hypothetical) example of what might happen when using malloc:
malloc(1)
If malloc is internally out of memory, it will ask the operating system some more. It will typically receive a page. Say it's 4KB in size with addresses starting at 0x1000
Your call returns giving you the address 0x1000 to use. Since you asked for 1 byte, it is defined behavior if you only use the address 0x1000.
Since the operating system has just allocated 4KB of memory to your process starting at address 0x1000, it will not complain if you read/write something from/to addresses 0x1000-0x1fff. So you can happily do so but it is undefined behavior.
Let's say you do another malloc(1)
Now malloc still has some memory left so it doesn't need to ask the operating system for more. It will probably return the address 0x1001.
If you had written to more than 1 byte using the address given from the first malloc, you will get into troubles when you use the address from the second malloc because you will overwrite the data.
So the point is you definitely get 1 byte from malloc but it might be that malloc internally has more memory allocated to you process.
No. It means that your program behaves badly. It writes to a memory location that it does not own.
You get undefined behavior - anything can happen. Don't do it and don't speculate about whether it works. Maybe it corrupts memory and you don't see it immediately. Only access memory within the allocated block size.
You may be allowed to use until the memory reaches some program memory or other point at which your applicaiton will most likely crash for accessing protected memory
So many responses and only one that gives the right explanation. While the page size, buffer overflow and undefined behaviour stories are true (and important) they do not exactly answer the original question. In fact any sane malloc implementation will allocate at least in size of the alignment requirement of an intor a void *. Why, because if it allocated only 1 byte then the next chunk of memory wouldn't be aligned anymore. There's always some book keeping data around your allocated blocks, these data structures are nearly always aligned to some multiple of 4. While some architectures can access words on unaligned addresses (x86) they do incure some penalties for doing that, so allocator implementer avoid that. Even in slab allocators there's no point in having a 1 byte pool as small size allocs are rare in practice. So it is very likely that there's 4 or 8 bytes real room in your malloc'd byte (this doesn't mean you may use that 'feature', it's wrong).
EDIT: Besides, most malloc reserve bigger chunks than asked for to avoid to many copy operations when calling realloc. As a test you can try using realloc in a loop with growing allocation size and compare the returned pointer, you will see that it changes only after a certain threshold.
You just got lucky there. You are writing to locations which you don't own this leads to undefined behavior.
On most platforms you can not just allocate one byte. There is often also a bit of housekeeping done by malloc to remember the amount of allocated memory. This yields to the fact that you usually "allocate" memory rounded up to the next 4 or 8 bytes. But this is not a defined behaviour.
If you use a few bytes more you'll very likeley get an access violation.
To answer your second question, the standard specifically mandates that malloc(0) be legal. Returned value is implementation-dependent, and can be either NULL or a regular memory address. In either case, you can (and should) legally call free on the return value when done. Even when non-NULL, you must not access data at that address.
malloc allocates the amount of memory you ask in heap and then return a pointer to void (void *) that can be cast to whatever you want.
It is responsibility of the programmer to use only the memory that has been allocate.
Writing (and even reading in protected environment) where you are not supposed can cause all sort of random problems at execution time. If you are lucky your program crash immediately with an exception and you can quite easily find the bug and fix it. If you aren't lucky it will crash randomly or produce unexpected behaviors.
For the Murphy's Law, "Anything that can go wrong, will go wrong" and as a corollary of that, "It will go wrong at the right time, producing the most large amount of damage".
It is sadly true. The only way to prevent that, is to avoid that in the language that you can actually do something like that.
Modern languages do not allow the programmer to do write in memory where he/she is not supposed (at least doing standard programming). That is how Java got a lot of its traction. I prefer C++ to C. You can still make damages using pointers but it is less likely. That is the reason why Smart Pointers are so popular.
In order to fix these kind of problems, a debug version of the malloc library can be handy. You need to call a check function periodically to sense if the memory was corrupted.
When I used to work intensively on C/C++ at work, we used Rational Purify that in practice replace the standard malloc (new in C++) and free (delete in C++) and it is able to return quite accurate report on where the program did something it was not supposed. However you will never be sure 100% that you do not have any error in your code. If you have a condition that happen extremely rarely, when you execute the program you may not incur in that condition. It will eventually happen in production on the most busy day on the most sensitive data (according to Murphy's Law ;-)
It could be that you're in Debug mode, where a call to malloc will actually call _malloc_dbg. The debug version will allocate more space than you have requested to cope with buffer overflows. I guess that if you ran this in Release mode you might (hopefully) get a crash instead.
You should use new and delete operators in c++... And a safe pointer to control that operations doesn't reach the limit of the array allocated...
There is no "C runtime". C is glorified assembler. It will happily let you walk all over the address space and do whatever you want with it, which is why it's the language of choice for writing OS kernels. Your program is an example of a heap corruption bug, which is a common security vulnerability. If you wrote a long enough string to that address, you'd eventually overrun the end of the heap and get a segmentation fault, but not before you overwrote a lot of other important things first.
When malloc() doesn't have enough free memory in its reserve pool to satisfy an allocation, it grabs pages from the kernel in chunks of at least 4 kb, and often much larger, so you're probably writing into reserved but un-malloc()ed space when you initially exceed the bounds of your allocation, which is why your test case always works. Actually honoring allocation addresses and sizes is completely voluntary, so you can assign a random address to a pointer, without calling malloc() at all, and start working with that as a character string, and as long as that random address happens to be in a writable memory segment like the heap or the stack, everything will seem to work, at least until you try to use whatever memory you were corrupting by doing so.
strcpy() doesn't check if the memory it's writing to is allocated. It just takes the destination address and writes the source character by character until it reaches the '\0'. So, if the destination memory allocated is smaller than the source, you just wrote over memory. This is a dangerous bug because it is very hard to track down.
puts() writes the string until it reaches '\0'.
My guess is that malloc(0) only returns NULL and not cause a run-time error.
My answer is in responce to Why does printf not seg fault or produce garbage?
From
The C programming language by Denis Ritchie & Kernighan
typedef long Align; /* for alignment to long boundary */
union header { /* block header */
struct {
union header *ptr; /* next block if on free list */
unsigned size; /* size of this block */
} s;
Align x; /* force alignment of blocks */
};
typedef union header Header;
The Align field is never used;it just forces each header to be aligned on a worst-case boundary.
In malloc,the requested size in characters is rounded up to the proper number of header-sized units; the block that will be allocated contains
one more unit, for the header itself, and this is the value recorded in the
size field of the header.
The pointer returned by malloc points at the free space, not at the header itself.
The user can do anything with the space requested, but if anything is written outside of the allocated space the list is likely to be scrambled.
-----------------------------------------
| | SIZE | |
-----------------------------------------
| |
points to |-----address returned touser
next free
block
-> a block returned by malloc
In statement
char* test = malloc(1);
malloc() will try to search consecutive bytes from the heap section of RAM if requested bytes are available and it returns the address as below
--------------------------------------------------------------
| free memory | memory in size allocated for user | |
----------------------------------------------------------------
0x100(assume address returned by malloc)
test
So when malloc(1) executed it won't allocate just 1 byte, it allocated some extra bytes to maintain above structure/heap table. you can find out how much actual memory allocated when you requested only 1 byte by printing test[-1] because just to before that block contain the size.
char* test = malloc(1);
printf("memory allocated in bytes = %d\n",test[-1]);
If the size passed is zero, and ptr is not NULL then the call is equivalent to free.
How the memory management unit(MMU) detects the double free of a pointer?
I know that its a good practice to make the pointer NULL just after freeing it, but suppose programmer does not do it. Is there any MMU mechanism to detect it?
The MMU has nothing to do with it. If you free a pointer allocated with malloc twice you will probably corrupt the C runtime heap. The heap (not the MMU) can in principle protect itself against such things, but most don't. Please note that this has nothing to do with the operating system - neither malloc() nor free() are system calls.
How the memory management unit(MMU) detects the double free of a pointer?
The MMU just does virtual address space -> physical memory mapping, it doesn't know anything about how the heap is organized/how the allocation works/..., that is operating system/allocator work.
How does OS detects the double free then? Whats the mechanism??
It walks the list/bitmap/... of allocated blocks, sees that there's no allocated block with the address you passed to it, so it detects that it's a double free.
However if that block has already been re-allocated, it finds it and correctly free it => but now the code that used the re-allocated block will go nuts, since the memory it has correctly acquired and that it didn't release has become unallocated.
If the allocator protects the unallocated memory marking it as no-read and no-write/removing it from the committed pages of the virtual address space the program will die as soon as that memory is accessed again (but the code that apparently caused the crash will be actually innocent, since it didn't do anything wrong).
Otherwise, the application may still work for some time, until that memory block will be given to some other piece of code that requested some memory. At that point, two pieces of the same application will try to work on the same block of memory, with all the mess that can originate from this.
(Thanks to Pascal Cuoq for pointing out my error.)
No, there is no MMU mechanism to detect it. It is common that calling free on an already free'd address causes the program to crash as the implentation of free does something unexpected and causes a segmentation fault.
Running valgrind is a good way of checking for memory management problems, such as double freeing a pointer.
Setting it to NULL isn't actually a good practice, it hides bugs. Particularly double free()s. Check the OS memory map, something like 0xfeeefeee or 0xdeadbeef is usually good.
You can diagnose double free()s with a debug allocator. Most any decent CRT has one.