I need to pull a report that show the avg tickets we receive per hour for a month.
So far I've been able to come up with:
SELECT "TASKS"."WO_NUM", "TASKS"."TASK", "TASKS"."COMPLETED", "TASKS"."OPENDATE",
"TASKS"."REQUEST", "TASKS"."RESPONS"
FROM "TRACKIT9_DATA"."dbo"."TASKS" "TASKS"
WHERE ("TASKS"."OPENDATE">={ts '2015-09-01 00:00:00'} AND
"TASKS"."OPENDATE"<{ts '2015-09-04 00:00:00'})
However this only show the number of ticket we received each hour per day and the report is a mess if I ask for a full months worth of data.
How would I go about asking Crystal Reports to Pull the data then Group it by Hour then give me an average?
You can do this in crystal report.
Group by month then create a formula and write as
Hour(database date field)
Use this to group as a second group after month, now try to manipulate the data
Related
I have an earnings table in my Google Data Studio report from January 21 - YTD.
But what i want is a table that shows me YTM (so this year until last month) Jan-21 til Sep-21 and that dynamicly on 1st Nov, Okt-21 is added to the table, and on 1st dec Nov-21
is added etc.
Because the Total YTD value is other wise too high, due to cost being booked at the end of the month and earnings through the month.
Filters wont let you do it dynamicly,
date range filters same,
always possible to do it manualy with date range but this i cannot ask from my client.
any suggestions??
Kind regards
I found the answer,
i left the question for when someone else wants to do it,
it is actualy simpel fixed by using advanced date filter and then leaving the start date on 1-jan, and end date to today minus 1 month.
this gave me the exact result i needed yt last month
I have created one measure in SSAS tabular called "Yesterday Sales by using max(date)-1", with this I am getting blanks if data is not present for max(date)-1. how to get the sales for the next available date.
for Example, my max(date) is 2019-11-25 and before that I have data for 2019-11-22. I don't have data for 23rd and 24th, in this case, I want to show "yesterday sales" for 2019-11-22. can you help to achieve this through Dax?
have you looked up LASTNONBLANK()?
https://exceleratorbi.com.au/lastnonblank-explained/
http://sqljason.com/2012/06/lastnonempty-in-tabular-mode-part-1.html
I have an ssrs report that shows revenues for each month of a year for several years based on start and end date parameters the user enters. What I would like to do is add a second column that shows the revenue for that quarter (march would show q1 revenue, june q2 etc). the problem I am having is that I am able to do this for a single year but once the query starts looking at multiple years my column shows the value for all 1st quarters regardless of year. The picture shows what I am currently getting. Any recommendations on how to fix my expression to also look at the year value when summing these quarters?
Here is the code I am using to only populate the quarter column based on the month.
=IIF(Fields!Sort_Order.Value=3,
Sum(Lookup(1,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings"))
+Sum(Lookup(2,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings"))
+Sum(Lookup(3,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings")),
IIF(Fields!Sort_Order.Value=6,
Sum(Lookup(4,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings"))
+Sum(Lookup(5,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings"))
+Sum(Lookup(6,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings")),
IIF(Fields!Sort_Order.Value=9,
Sum(Lookup(7,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings"))
+Sum(Lookup(8,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings"))
+Sum(Lookup(9,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings")),
IIF(Fields!Sort_Order.Value=12,
Sum(Lookup(10,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings"))
+Sum(Lookup(11,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings"))
+Sum(Lookup(12,Fields!Sort_Order.Value,Fields!Calculated_Revenue.Value,"Bookings")),""))))
I ended up creating a quarter column within my data set that was then used as a parent group for the month rows. I then hid that column and added a total for the quarter that gave me sub totals. Not exactly what I was looking for but gave me the result I needed.
This should be simple so I think I am missing it. I have a simple line chart that shows Users per day over 28 days (X axis is date, Y axis is number of users). I am using hard-coded 28 days here just to get it to work.
I want to add a scorecard for average daily users over the 28 day time frame. I tried to use a calculated field AVG(Users) but this shows an error for re-aggregating an aggregated value. Then I tried Users/28, but the result oddly is the value of Users for today. The division seems to be completely ignored.
What is the best way to show average number of daily users over a time frame? Average daily users over 10 days, 20 day, etc.
Try to create a new metric that counts the dates eg
Count of Date = COUNT(Date) or
Count of Date = COUNT_DISTINCT(Date) in case you have duplicated dates
Then create another metric for average users
Users AVG = (Users / Count of Date)
The average depends on the timeframe you have selected. If you are selecting the last 28 days the average is for those 28 days (dates), if you filter 20 days the average is for those 20 days etc.
Hope that helps.
I have been able to do this in an extremely crude and ugly manner using Google Sheets as a means to do the calculation and serve as a data source for Data studio.
This may be useful for other people trying to do the same thing. This assumes you know how to work with GA data in Sheets and are starting with a Report Configuration. There must be a better way.
Example for Average Number of Daily Users over the last 7 days:
Edit the Report Configuration fields:
Report Name: create one report per day, in this case 7 reports. Name them (for example) Users-1 through Users-7. These are your Row 2 values. You'll have 7 columns, with the first report name in column B.
Start Date and End Date: use TODAY()-X where X is the number of days previous to define the start and end dates for each report. Each report will contain the user count for one day. Report Users-1 will use TODAY()-1 for start and end, etc.
Metrics: enter the metrics e.g. ga:users and ga:new users
Create the reports
Use 'Run reports' to have the result sheets created and populated.
Create a sheet for an interim data set you will use as the basis for the average calculation. The first column is date, the remaining columns are for the metrics, in this case Users and New Users.
Populate the interim data set with the dates and values. You will reference the Report Configuration to get the dates, and you will pull the metrics from each of the individual reports. At this stage you have a sheet with date in first columns and values in subsequent columns with a row for each day's values. Be sure to use a header.
Finally, create a sheet that averages the values in the interim data set. This sheet will have a column for each metric, with one value per column. The one value is calculated from the series in the interim data set, for example =AVG(interim_sheet_reference:range) or any other calculation you'd like to do.
At last, you can use Data Studio to connect to this data source and use the values. For counts of users such as this example, you would use Sum as the aggregation field type when you are creating the data source.
It's super ugly but it works.
I have a query concerning SSRS and displaying data. My report will consist of a weekly breakdown of week numbers and sum of hours. Showing something like this
12/06/10 351
19/06/10 342
26/06/10 399
And then on clicking/toggling the week data cell(s) a breakdown by day will be displayed. I have completed the daily breakdown and written a function to return all weeks in 2010 but my difficulty lies in grouping by the week.
In the layout tab for SSRS, I have created a group on the week value and date value, and have the week value appearing in the group cell, but it creates an additional blank line below each day breakdown.
Could anyone help me?
Thanks very much