DNN theme not loaded after migration - sql-server

I'm absolutely new to DNN world, and I have to migrate a bunch of websites from a web server to another.
Following my expectations and some "guide" on the web, i did:
Exported SqlServer databases from old server
Imported all databases in new server
Copied the whole c:\inetput\vhosts directory from old server to the new one
Created manually the vhosts entries in IIS to host the websites (setting the vhost on the httpdocs dir and converting to application the subfolder "portal"
After some problem with app pool, user permissions, database user configurations etc. i reached to get websites running.
But what it happens is that the websites seems to load the default "theme" instead of the one that was using in production server. What did I forgot?

There is likely an Error that is being thrown with the current "skin" so you'll need to get into the Event Viewer (under the admin page) if you can get logged in, or into the EventLog table in the database to see what errors are being thrown.
select top 50 * From eventlog order by logcreatedate desc

Related

SilverStripe CMS Installation and Development

I am very new to cms and I am wondering if you fine gentleman can help me get started properly. Just a note, I have spent hours researching my questions and I could not find the answer I was looking for.
I have installed silverstripe locally and i started creating my own site with it. Created a new theme, deleted the old 2. It created some random database for me, it was mostly automated. Now I have a server, and I want to put it on my server, but I can't figure out for the life of me how to import it. I was able to install silverstripe and have a default theme (simple) running, but no matter what file I copy or change, it never loads my site. Does anyone has a tutorial on how this is achieved? server is with godaddy.
When I started creating this site, it created a database with a random name, how can I rename that database? What are the files I need to update?
How do I access phpmyadmin locally? localhost:port/phpmyadmin does not works.
1. Site deployment
Here is how I deploy a Silverstripe website to a live server.
ftp into the server
Upload all the files from the development folder to the server
Create a database on the server
Create a database user for the database and add all database privileges
Update the live mysite/_config.php file with your live database username, password and database name
Dump your local database
Import your database dump into your live server database
Call dev/build/?flush=all on your live server
Check the website works
Have a beer
2. Database renaming
The database settings are stored in mysite/_config.php. They should look something like this:
$databaseConfig = array(
'type' => 'MySQLDatabase',
'server' => 'localhost',
'username' => 'database_username',
'password' => 'database_password',
'database' => 'database_name'
);
To rename the database, rename your database in phpmyadmin. Then update your $databaseConfig database name in your mysite/_config.php file.
3. localhost phpmyadmin
Webmatrix does not come with phpmyadmin. You can download it, extract it to your webmatrix html root directory and use it. Or you can download an alternative like adminer, which is a one file database manager.
With regards to renaming your database, see the comments above as they are accurate.
However you still seem to be having problems getting your database out of your local environment, so let's concentrate on that first and see how you go with it.
Note that there are at least two ways you can back up/export your local database:
1). Using phpMyAdmin (Or other web-based DB utility)
2). Using the command line (see the 'mysqldump' command)
You asked about using phpMyAdmin to backup your SilverStripe database so I'll address only 1). above:
As this is specfic to your own development environment and you've not mentioned how far you've got in setting this up locally, nor any error messages you may have received, myself and others can only go so far in helping you out with this.
If you've setup phpMyAdmin as per the installation requirements, it should be installed by default and accessible at this address on your computer:
http://localhost:80/phpmyadmin
The following will also work, as port 80 is the default for most webservers:
http://localhost/phpmyadmin
If neither of these work and you receive a 404, 403 or 500 error (The screen in the browser should tell you which of these has occurred) I'm pretty confident you've not set it up correctly on your system. My suggestion is therefore to go back to the phpMyAdmin docs and re-check you've performed everything correctly as per your own environment setup (e.g. for Linux, OS X, Windows etc).
Once you're setup correctly, have a crack at the DB renaming suggestions above and coe back for more help if you need it.

Key steps to uploading a Drupal website from Local to live using a hosting firm

I'm a newbie to pushing Drupal websites from local to live via a CP panel with a hosting company and wondered if there are any key steps I need to follow? I usually end up with Internal Server 500 errors or no themes showing so not a good start!
The steps I follow are:
Export the database from my local PHPMyAdmin
Log into my hosting CP Panel and create the database on there
Create a user for the database (with password)
Change the settings.php to match the database settings
Load all Drupal files via FTP
Create a 'tmp' folder in the 'sites > default> files' directory
What am I doing wrong?! Is it something to do with the .htaccess file as to why I either get the error or my theme never shows?
Any help would be much appreciated! So stressful and frsutrating as a newbie! Once I've done 1 I'm hoping it'll be plain sailing!!
Thanks!
C
You have the basic steps right. Check the php error logs on the server (probably accessible via the control panel if you dont have ssh access), they should give you more information as to what actually caused the 500 errors.
Doubt it is an htaccess issue unless you are doing something crazy in there.
Can you see he drupal admin at all? If so, clear cache, check watchdog for clues also.
It's easier to download and install Drupal again on the live server rather than to copy everything via FTP. The settings.php file is where your MySQL information is stored so this file should not be copied. Follow Drupal's documentation on how to install Drupal at https://drupal.org/documentation/install/download
To transfer your database, install and enable the Backup and Migrate module on your local server from https://drupal.org/project/backup_migrate and back up your database locally.
After Drupal is installed on the live server, go ahead and copy your modules, themes, and files from /sites/all and /sites/default/files (or any non-Drupal core files that you may have created). Enable and use the Backup and Migrate module to restore your database to your live server. You may need to configure the php.ini file if the database is over 8MB.

Creating virtual directory in IIs for dnn website which uses new database

I want to create virtual directory for my dnn website which uses new database, for this I followed these steps.
go to iis server manager right click on site and click on add virtual directory
then I copied all file from dnn site to virtual directory folder and runs on browser it runs fine
after that I created new database and restore the backup of old database(which are used by Dnn website) on it . and change the connection string of virtual directory web.config file, it shows error "Invalid login" then I created new login in sql server and checked db_owner Properties of new database.
but when i browse site one issue occurring "Error 310 (net::ERR_TOO_MANY_REDIRECTS): There were too many redirects."
so I want to know is these steps are right? if right then, how can i resolve this problem .
If any one have an idea please guide me
Thanks
You will need to update the PORTALALIAS in the restored Database in order to get the site working. Your PortalAlias should match the URL of the virtual directory.

Can't find umbraco data storage

I have installed Umbraco via WebMatrix, and entered "server=(localdb)\v11.0;integrated security=true" as a connection string. The site works fine, but I can't find the database that Umbraco have created. When I open the (localdb)\v11.0, it's not there.
I have tried searching whole system with *.mdf. but no luck. Where can the data be?
I am using umbraco 4.8.0
Most likely the database is in the user profile folder of the account that Umbraco is running under. See this post for more complete explanation. You may also want to look at this other post about why LocalDB by default puts the database file in the root of the user profile of the account it runs under.
I have found it. With no Database defined, SQL server uses the first or the default database in the list, which appears to master database. SSMS and such, don't display tables of system objects, so I found the tables by querying the database.

How does the ClickOnce installer handle updates when a compact database is involved?

I have a simple WPF application that uses ClickOnce to handle installing. Within this application is a compact database. Through testing I have found that when I publish a new build this database will get overwritten, which is not what I want. Is there anyway I can have fine grained control over what files are updated? I assume ClickOnce is simply checking the hash of the database file, deciding that it has changed and pulling the update.
As a workaround I have since removed the database from the files that are included with the published application so the original remains on the client machine after an update, untouched.
Not a great solution I know
Thanks,
ClickOnce deployments segregate the Application Files into "Include" or "Data file". You can specify what each file is in visual Studio by going to the project Properties page, Publish tab, then clicking the "Application Files..." button. You can then set your .sdf file to "Data File" under the Publish Status column.
Data Files that are downloaded with a ClickOnce application are then placed in a separate directory for each new version.
The idea is that on the first run of the new application version, you go retrieve all the user's private data from their old-version data files and incorporate that data into the new data files which have just been downloaded with your new version.
I think you'll find the information you need at Accessing Local and Remote Data in ClickOnce Applications. Specifically, look at the sections "ClickOnce Data Directory" and "Data Directory and Application Versions."
To access a SQL Server CE database located in your Data directory, use a connection string similar to the following:
<add
name="MyApplication.Properties.Settings.LocalCacheConnectionString"
connectionString="Data Source=|DataDirectory|\LocalCache.sdf"
providerName="Microsoft.SqlServerCe.Client.3.5" />
The "|DataDirectory|" is a special syntax supported by SQL CE and SQL Express and resolves at runtime to the proper directory.
If you so much as open that SQLCE database included in your project, it will change the time stamp on the database, and ClickOnce will deploy it and put the old version under the \pre subfolder.
You might want to consider this method for handling this. Then if you accidentally deploy a new version of the database and don't realize it, you're not hosed. If you intentionally make changes, you can change the database structure of your current database with SQL queries, and pull data from the new copy deployed to the Data Directory (that you're otherwise ignoring) when you need to.
RobinDotNet

Resources