I have WPF prototype application which includes 1-4 other controls (WebBrowser control) like on picture
A need to resize a control (with facebook) taking it's conner and reducing size until the center of a window. If the size of this control would be less then "minSize" then it should be hidden\closed. Other layouts should fill an empty area.
I don't know from which controls should I start my experiments. No one does the right work.
I tried Grid, but it's impossible to take cell's conner to resize webBrowser control.
GridSplitter works just for two panels and doesn't let me take cell's conner.
Some developers say about custom control creating...
I am developing a whiteboard application in WPF.
How can I draw a rectangle and circle/ellipse by dragging the mouse like we do in Paint by dragging the mouse pointer ?
I am using WPF canvas for drawing.
have a look into below link
http://www.codeproject.com/Articles/22776/WPF-DrawTools
To run WPF-DrawTools you have to:
Let the VS to convert the project.
Set appropriate NetFramework version (say, Net 4.5).
Add references to correspondent libraries (e.g., PresentationCore) if VS could not find them itself.
all
I m developing on Medical Image Processing software, I wont crop image on mouse event, means when we drag mouse cursor and move over the image in any shape, the selected portion of image should be cropped. and that will paste in same image. is it Possible in WPF or Silverlight?
Check out the Clip property. You can specify a path in this property that is used to clip the parent object. Set Clip on your Image control to clip the image.
For design time clipping, your best bet is to use Blend (download a trial here if you don't have it) to draw a free hand path. Right click on the path and select Path->Make Clipping Path. In the next dialog, select the image that you want to clip.
EDIT: It sounds like you want to use runtime clipping/cropping, so you will want to generate the clip path using the points gathered from the mouse events. Create a collection of these points and then generate a path from them (linear lines probably... I don't know how you would generate appropriate curves unless you wrote a complex algorithm). Set this path to the Clip property after the fact.
/EDIT
You can add a transparent layer on top of the control and add an InkCanvas.
Then allow the user to draw a stroke (freehand) and turn the stroke into a Geometry by using GetGeometry use the geometry in the Clip property of the control to be clipped.
In a Silverlight application I have large images which have flow charts on them.
I need to handle the clicks on specific hotspots of the image where the flow chart boxes are.
Since the flow charts will always be different, the information of where the hotspots has to be dynamic, e.g. in a list of coordinates.
I've found article like this one but don't need the detail of e.g. the outline of countries but just simple rectangle and circle areas.
I've also found articles where they talk about overlaying an HTML image map over the silverlight application, but it has to be easier than this.
What is the best way to handle clicks on specific areas of an image in silverlight?
Place the Image and a Canvas in a Grid so that the Canvas overlays the Image.
Add shapes of appropriate sizes and placed as needed to the canvas. All shapes will a transparent fill and no border, hence the user only sees the Image. On the Canvas MouseDown (or Up events) use OriginalSource to determine which shape generated the click. Use the Tag property of each shape to associate it with some object that represents the flowchart element being mapped.
I found an easy way to do this without a canvas:
How to get the coordinates of an image mouse click in the event handler?
I would like to understand the general requirements for WPF/Silverlight layout for making it possible to implement pan&zoom (drag and zoom) features. I don't mean pan&zoom for an image but for a total page (window) layout (or part of it) with some controls.
What features of the layout and what features of used custom controls make layout fixed and pan&zoom impossible?
General rule
With few exceptions, everything in WPF can be panned, zoomed, rotated, stretched, etc to your heart's content. This include single controls like Button, compound controls like ListBox, and containers like StackPanel.
The exceptions
Here are the exceptions:
If you are using Adorner and your AdornerDecorator is outside the panned/zoomed area, then the Adorners attached to your panned/zoomed area will pan but not zoom. The solution is to put an additional AdornerDecorator inside the panned/zoomed area.
If you use a Popup, it will display at the panned/zoomed location of its PlacementTarget but it will not itself be scaled. It will also not move as you pan the area containing its PlacementTarget (basically it sits in its own surface above the target control). To get around this, use a zero-size Canvas with high Z order instead when you want something to pop up within the zoom/pan area.
Any ContextMenu you define will be shown inside a popup, so the menu items will display normal size even when the area you clicked on is zoomed in or out. Because of the nature of a context menu, this is probably desirable behavior. If not, you can wrap the menu items in a ViewBox and tie the zoom to your main area's zoom.
Your ToolTips will display normal size even if the UI is panned or zoomed. Same solution as for ContextMenu.
If you used WinForms integration to integrated legacy WinForms controls and UI, they will not properly pan, zoom and clip in certain situations. There is an advanced technique for working around this, where you implement the WinForms control off-screen, then using BitBlt or similar copy the image into your window as an image, and forward mouse clicks and keystrokes to the offscreen window. This is a lot of work, though.
If you bypass WPF and directly use GDI+ or DirectX, or use Win32 hWnds to display content or UI, that content or UI will not be properly panned, zoomed or clipped to the window unless you do it yourself in your interface code.
Final notes
A good WPF UI always uses panels like Grid, DockPanel, etc to lay out controls in a flexible manner so they automatically adjust to container sizes, rather than using fixed sizes and positions. This is also true for the internal contents of your pan/zoom area as well, BUT there is an exception to this rule: the outermost element in your pan/zoom area must have a specified size. Otherwise what will define the area being panned/zoomed over?
The easy way to implement pan/zoom capabilities is to adjust the RenderTransform of the outermost control in your pan/zoom area. There are many different ways to implement controls for panning and zooming, for example you could use toolbar buttons and sliders, scroll bars, mouse wheel, spacebar+drag to pan, draggable areas of panned UI itself, or any combination of these. Whichever interface you choose, just have it update the RenderTransform appropriately from the code-behind and you're good to go.
If your chosen panning mechanism is scroll bars, you might want to use a ScrollViewer and only use the RenderTransform for the zoom.
Be sure you set clipping on the pan/zoom area. Otherwise if you zoom in or pan items off the side, they will still be visible outside the pan/zoom area.
Use a MultiScaleImage or Canvas area, and place everything you need to pan and zoom in it
<Canvas x:Name="panZoomPanel" Background="Transparent">
</Canvas>
In code use make a TranslateTransform and a ScaleTransform in a TransformGroup to pan and zoom
Check out other SO post or this example or this one
In general you can treat any composite set of UI elements the same as you would treat a single UIElement so the case of an image isn't really different than doing the same for an entire application. The best way to handle zooming based on user input (as opposed to automatic scaling that Viewbox does) is applying a ScaleTransform. This can be set on a high level parent element, like a Grid at the root of a Window layout. For panning you can combine in a TranslateTransform or in some cases use a ScrollViewer to handle moving the view of the content.
One really easy way of implementing zoom in XAML is to use a Silverlight ViewBox. This zooms the XAML not the pixels. You can specify the stretch to use and the ViewBox will scale based on this (Fill, None, Uniform etc). There are some great Viewbox blog posts on the web if you search for Silverlight+Viewbox on Google.
The panning is easily accomplished with a similar mechanism to drag and drop and there are also numerous how-to blog posts on this, available via Google. Just amounts to capturing MouseDown, MouseMove and MouseUp events.