Been several years since I had to write an SSIS package and struggling with converting a datetimezone string from Excel to Data Conversion transformation converting to DB_TIMEZONEOFFSET to a SQL Server Destination.
The following is the Timestamp in all 7 rows of Excel source:
The date column from the Excel source is a Unicode String [DT_WSTR] as seen below:
The SQL Server destination field is setup as DATETIMEOFFSET(7) as seen below:
I am receiving the following errors on the Data Conversion transformation when run the data flow:
[Data Conversion 2] Error: Data conversion failed while converting
column "Column1.createdAt" (82) to column "Copy of Column1.createdAt"
(38). The conversion returned status value 2 and status text "The
value could not be converted because of a potential loss of data.".
[Data Conversion 2] Error: SSIS Error Code
DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Data
Conversion.Outputs[Data Conversion Output].Columns[Copy of
Column1.createdAt]" failed because error code 0xC020907F occurred, and
the error row disposition on "Data Conversion.Outputs[Data Conversion
Output].Columns[Copy of Column1.createdAt]" specifies failure on
error. An error occurred on the specified object of the specified
component. There may be error messages posted before this with more
information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The
ProcessInput method on component "Data Conversion" (2) failed with
error code 0xC0209029 while processing input "Data Conversion Input"
(3). The identified component returned an error from the ProcessInput
method. The error is specific to the component, but the error is fatal
and will cause the Data Flow task to stop running. There may be error
messages posted before this with more information about the failure.
It is also important to note that I did also try to use a Derived Column transformation before the Data Conversion transformation as well to cast as DATETIMEOFFSET(7) to match that of SQL Server destination and received errors there as well similar to above.
Been fighting this for a while now and any extra eyes will help.
Thanks.
ssis cannot do the conversion if there are T and Z letters in the field. Use the REPLACE command to replace the letter T with space and the letter Z without characters. Like This : (DT_DBTIMESTAMPOFFSET,7)REPLACE(REPLACE(createdAt,"T"," "),"Z","")
Executing my package and i am seeing below error. EMP ID from source (Flat file) is DT_STR(50) and loading it into table:
EMP_ID int not null column
Using data conversion task i am converting it in to four byte signed integer
But Job is failing.
Description: Data conversion failed while converting column "EMP ID"
(105) to column "EMP ID" (25). The conversion returned status value 2
and status text "The value could not be converted because of a
potential loss of data.". End Error Error: 2019-09-16 11:37:28.53
Code: 0xC0209029 Source: Data Flow Task 1 Data Conversion 0 - 0
[2] Description: SSIS Error Code
DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Data Conversion
.Outputs[Data Conversion Output].Columns[EMP ID]" failed because error
code 0xC020907F occurred, and the error row disposition on "Data
Conversion 0 - 0.Outputs[Data Conversion Output].Columns[EMP ID]"
specifies failure on error. An error occurred on the specified object
of the specified component. There may be error messages posted before
this with more information about the failure. End Error Error:
2019-09-16 11:37:28.53 Code: 0xC0047022 Source: Data Flow Task
SSIS.Pipeline Description: SSIS Error Code
DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Data
Conversion (2) failed with error code 0xC0209029 while processing
input "Data Conversion Input" (3). The identified component returned
an error from the ProcessInput method. The error is specific to the
component, but the error is fatal and will cause the Data Flow task to
stop running. There may be error messages posted before this with
more information about the failure. End Error DTExec: The package
execution returned DTSER_FAILURE (1). Started: 11:37:27 AM
Finished: 11:37:28 AM Elapsed: 0.797 seconds. The package execution
failed. The step failed.
The main error is:
The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data
It looks like that the source column contains values that cannot be converted to integer, you can configure the error output to redirect bad rows to a flat file destination in order to check the values that are causing this error.
I am extracting pattern from the 'Notes' column, I am looking for an alpha numeric word (MXPC123456) from the notes and I want to store the output in a new column. So for that I am using a Derived Column and FindString() function.
I am getting error when I run this code using the following expression in Drived Column inside my SSIS package:
(DT_WSTR,255)SUBSTRING(TEXT_LINE1,FINDSTRING(TEXT_LINE1,"MXPC",1),10).
Don't know what I am doing wrong.
Error: 0xC0049067 at Get DC Coms Data, Derived Column [67]: An error occurred while evaluating the function.
Error: 0xC0209029 at Get DC Coms Data, Derived Column [67]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "component "Derived Column" (67)" failed because error code 0xC0049067 occurred, and the error row disposition on "output column "CKT_MX" (91)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Get DC Coms Data, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Derived Column" (67) failed with error code 0xC0209029 while processing input "Derived Column Input" (68). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Could you please help?
Regards
Prab
There are 2 things that may cause this error:
TEXT_LINE1 doesn't contains "MXPC" string , so FINDSTRING(TEXT_LINE1,"MXPC",1) will return 0 and the SUBSTRING function will throw an exception
TEXT_LINE1 contains "MXPC" string but there is no 10 characters after the FINDSTRING returned value
TEXT_LINE1 IS NULL
so you can add some validation to this expression
ISNULL([TEXT_LINE1]) == TRUE ? "" : (FINDSTRING([TEXT_LINE1],"MXPC",1) == 0 ? "" :
(LEN([TEXT_LINE1]) >= FINDSTRING([TEXT_LINE1],"MXPC",1) + 9 ? SUBSTRING([TEXT_LINE1],FINDSTRING([TEXT_LINE1],"MXPC",1),10) : ""))
I have a csv file from csvde which has the objectGUID and some other information from AD.
I want to use SSIS to copy this info into the following table in SQL
[DN] [varchar](255) NULL,
[ObjectGuid] [varbinary](50) NULL,
[pwdExpiry] [bigint] NULL
Sample csv file from csvde file looks like this:
DN,objectGUID,msDS-UserPasswordExpiryTimeComputed
"CN=DEFRAVMDROOTCA1,OU=Test,DC=company,DC=net",X'c7eb536bc818f842bde11d8152755e7e',9223372036854775807
"CN=Sajeed Temp,OU=Test,DC=company,DC=net",X'417979aad0a9cc49818d1960ec95fb80',130834271604215531
"CN=IAMToolset.2,OU=Test,DC=company,DC=net",X'5a936d02842275458c45c1eb932a0f67',130849689154565841
"CN=IAMToolset.3,OU=Test,DC=company,DC=net",X'c03d2d11f8d8fe40a0eac70d41f3e1fd',130849689796313340
"CN=IAMToolset.4,OU=Test,DC=company,DC=net",X'e8b084e9d8c4a8428284ecb40b628da8',130849690015854425
"CN=IAMToolset.5,OU=Test,DC=company,DC=net",X'4b4e17dfce09e049941f3bd0ecddd5bb',130849690271803391
"CN=IAMToolset.6,OU=Test,DC=company,DC=net",X'004454a17c997b43af8e4b2653b491c2',130849690477125089
"CN=IAMToolset.7,OU=Test,DC=company,DC=net",X'8f70d9c64514c1409364624e3b079d42',130849690693072263
"CN=IAMToolset.8,OU=Test,DC=company,DC=net",X'ff70df18badafb4491225b29470b9a3d',130849690864329935
"CN=IAMToolset.9,OU=Test,DC=company,DC=net",X'a081e666a2df3c4481a4f124b489fdd8',130849691049650737
"CN=IAMToolset.1,OU=Test,DC=company,DC=net",X'8c59987d0a5c2a4ea1e98d07a84e1144',130849691453887596
"CN=testmigration,OU=Test,DC=company,DC=net",X'a800d0e29335d248ad990ad31fd5dd52',130732638130905654
"CN=DEFRAVMDPKMCA1,OU=Test,DC=company,DC=net",X'0d67d30bcbbbed48af9ed7736f9b1992',9223372036854775807
I have the SSIS package with two connection managers. One of them is for flat file and I'm reading the column objectGUID from the csv as a string. The thing is I want to convert this column inside a dataflow task to a format which I can push to the [ObjectGuid] varbinary NULL column in the SQL table.
I have use the data conversion transform and tried converting to DT_GUID and DT_BYTES but they both fail at that data conversion step when I run the package.
So what I really want to see is that if I have an objectGUID in csv file as
X'168dea153aab0a45adf8079b94041e90' (string)
I want to see it in the SQL table as
0x168DEA153AAB0A45ADF8079B94041E90 (varBinary)
The error I get on SSIS runtime is:
Error: 0xC02020C5 at Data Flow Task, Data Conversion [2]: Data conversion failed while converting column "ObjectGuid.LeftCleaned" (16) to column "Copy of ObjectGuid.LeftCleaned" (6). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Data Flow Task, Data Conversion [2]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Data Conversion.Outputs[Data Conversion Output].Columns[Copy of ObjectGuid.LeftCleaned]" failed because error code 0xC020907F occurred, and the error row disposition on "Data Conversion.Outputs[Data Conversion Output].Columns[Copy of ObjectGuid.LeftCleaned]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Data Conversion" (2) failed with error code 0xC0209029 while processing input "Data Conversion Input" (3). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Please help
I believe the key is here:
"The value could not be converted because of a potential loss of data."
Ensure you have given a large enough Length to the Data Conversion task to accommodate for the largest possible value in the CSV. Also on the other side you need to make sure that the column can hold that same amount of data after conversion.
I have a simple data flow where I read data out of a table, do some data conversions, and load it into another table:
However when I run the package I get the following errors:
Error: 0xC02020C5 at Atish to CRM, Data Conversion [142]: Data conversion failed while converting column "CAMPAIGNID" (27) to column "Copy of CAMPAIGNID" (206). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Atish to CRM, Data Conversion [142]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Data Conversion.Outputs[Data Conversion Output].Columns[Copy of CAMPAIGNID]" failed because error code 0xC020907F occurred, and the error row disposition on "Data Conversion.Outputs[Data Conversion Output].Columns[Copy of CAMPAIGNID]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Atish to CRM, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Data Conversion" (142) failed with error code 0xC0209029 while processing input "Data Conversion Input" (143). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
My mappings:
Lastly since the error seems to be complaining about 'CAMPAIGNID', the datatype of it on the destination table is uniqueidentifier. I honestly don't know what I'm missing here.
You are converting CAMPAIGNNAME to uniqueidentifier and CAMPAIGNID to string[DT_STR]. However your description seems to indicate that CAMPAIGNID must be uniqueidentifier
Also as per the error, your settings seem to indicate Failure on error. If you are sure that the conversion is correct and there will be no truncation, then you can change that property to Ignore on error. Alternately, you can use Error output and redirect it to another destination and inspect the results.
Also it is unclear why you are converting all the columns. Adding datatypes of your source and destination columns might add more clarity.