I'm trying to copy data from one table to another using global parameters to define the local parameters. The string values for the local parameters is changed appropriately, however, when I try to use them as the referenced column names it populates the column I am trying to colpy to with just the value of the parameter and not the values from the columns of the other table. I'm new to sql so I am stuck.
DECLARE #ProductName VarChar(255), #SiteName VarChar(255)
SET #ProductName =
CASE ##[Level]
WHEN 1 THEN 'MaterialAggName'
WHEN 2 THEN 'TradeAggName'
WHEN 3 THEN 'ProfitCenterAggName'
WHEN 4 THEN 'PerformanceCenterAggName'
WHEN 5 THEN 'ValueCenterAggName'
WHEN 6 THEN 'BusinessAggName'
END;
SET #SiteName =
CASE ##[CustomerLevel]
WHEN 1 THEN 'Customer_Postal_Name'
WHEN 2 THEN 'Customer_3DigitPostal_Name'
WHEN 3 THEN 'Customer_Location_Name'
WHEN 4 THEN 'Customer_Region_Name'
WHEN 5 THEN 'Customer_County_Name'
WHEN 6 THEN 'Customer_GeoBusiness_Name'
END;
CREATE TABLE [dbo].[Temp_Demand]
(
SiteName VarChar(255),
ProductName VarChar(255),
Quantity Int
)
INSERT INTO [dbo].[Temp_Demand] (SiteName, ProductName, Quantity)
SELECT #SiteName, #ProductName, Final
FROM [dbo].[Customers_Master]
Any Suggestions?
To do this you need to use Dynamic SQL, your insert statement would need something like .
DECLARE #SQL NVARCHAR(MAX)
Set #SQL = 'INSERT INTO [dbo].[Temp_Demand] (SiteName, ProductName, Quantity)
SELECT ''' + #SiteName + ''', ''' + #ProductName + ''', Final
FROM [dbo].[Customers_Master]'
sp_executesql #SQL
If there is more than one insert with changing values, simply put this in a loop. *except the declare of course.
Related
In my stored procedure I declared two table variables on top of my procedure. Now I am trying to use that table variable within a dynamic sql statement but I get this error at the time of execution of that procedure. I am using Sql Server 2008.
This is how my query looks like,
set #col_name = 'Assoc_Item_'
+ Convert(nvarchar(2), #curr_row1);
set #sqlstat = 'update #RelPro set '
+ #col_name
+ ' = (Select relsku From #TSku Where tid = '
+ Convert(nvarchar(2), #curr_row1) + ') Where RowID = '
+ Convert(nvarchar(2), #curr_row);
Exec(#sqlstat);
And I get the following errors,
Must declare the table variable "#RelPro".
Must declare the table variable "#TSku".
I have tried to take the table outside of the string block of dynamic query but to no avail.
On SQL Server 2008+ it is possible to use Table Valued Parameters to pass in a table variable to a dynamic SQL statement as long as you don't need to update the values in the table itself.
So from the code you posted you could use this approach for #TSku but not for #RelPro
Example syntax below.
CREATE TYPE MyTable AS TABLE
(
Foo int,
Bar int
);
GO
DECLARE #T AS MyTable;
INSERT INTO #T VALUES (1,2), (2,3)
SELECT *,
sys.fn_PhysLocFormatter(%%physloc%%) AS [physloc]
FROM #T
EXEC sp_executesql
N'SELECT *,
sys.fn_PhysLocFormatter(%%physloc%%) AS [physloc]
FROM #T',
N'#T MyTable READONLY',
#T=#T
The physloc column is included just to demonstrate that the table variable referenced in the child scope is definitely the same one as the outer scope rather than a copy.
Your EXEC executes in a different context, therefore it is not aware of any variables that have been declared in your original context. You should be able to use a temp table instead of a table variable as shown in the simple demo below.
create table #t (id int)
declare #value nchar(1)
set #value = N'1'
declare #sql nvarchar(max)
set #sql = N'insert into #t (id) values (' + #value + N')'
exec (#sql)
select * from #t
drop table #t
You don't have to use dynamic SQL
update
R
set
Assoc_Item_1 = CASE WHEN #curr_row = 1 THEN foo.relsku ELSE Assoc_Item_1 END,
Assoc_Item_2 = CASE WHEN #curr_row = 2 THEN foo.relsku ELSE Assoc_Item_2 END,
Assoc_Item_3 = CASE WHEN #curr_row = 3 THEN foo.relsku ELSE Assoc_Item_3 END,
Assoc_Item_4 = CASE WHEN #curr_row = 4 THEN foo.relsku ELSE Assoc_Item_4 END,
Assoc_Item_5 = CASE WHEN #curr_row = 5 THEN foo.relsku ELSE Assoc_Item_5 END,
...
from
(Select relsku From #TSku Where tid = #curr_row1) foo
CROSS JOIN
#RelPro R
Where
R.RowID = #curr_row;
You can't do this because the table variables are out of scope.
You would have to declare the table variable inside the dynamic SQL statement or create temporary tables.
I would suggest you read this excellent article on dynamic SQL.
http://www.sommarskog.se/dynamic_sql.html
Well, I figured out the way and thought to share with the people out there who might run into the same problem.
Let me start with the problem I had been facing,
I had been trying to execute a Dynamic Sql Statement that used two temporary tables I declared at the top of my stored procedure, but because that dynamic sql statment created a new scope, I couldn't use the temporary tables.
Solution:
I simply changed them to Global Temporary Variables and they worked.
Find my stored procedure underneath.
CREATE PROCEDURE RAFCustom_Room_GetRelatedProducts
-- Add the parameters for the stored procedure here
#PRODUCT_SKU nvarchar(15) = Null
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
IF OBJECT_ID('tempdb..##RelPro', 'U') IS NOT NULL
BEGIN
DROP TABLE ##RelPro
END
Create Table ##RelPro
(
RowID int identity(1,1),
ID int,
Item_Name nvarchar(max),
SKU nvarchar(max),
Vendor nvarchar(max),
Product_Img_180 nvarchar(max),
rpGroup int,
Assoc_Item_1 nvarchar(max),
Assoc_Item_2 nvarchar(max),
Assoc_Item_3 nvarchar(max),
Assoc_Item_4 nvarchar(max),
Assoc_Item_5 nvarchar(max),
Assoc_Item_6 nvarchar(max),
Assoc_Item_7 nvarchar(max),
Assoc_Item_8 nvarchar(max),
Assoc_Item_9 nvarchar(max),
Assoc_Item_10 nvarchar(max)
);
Begin
Insert ##RelPro(ID, Item_Name, SKU, Vendor, Product_Img_180, rpGroup)
Select distinct zp.ProductID, zp.Name, zp.SKU,
(Select m.Name From ZNodeManufacturer m(nolock) Where m.ManufacturerID = zp.ManufacturerID),
'http://s0001.server.com/is/sw11/DG/' +
(Select m.Custom1 From ZNodeManufacturer m(nolock) Where m.ManufacturerID = zp.ManufacturerID) +
'_' + zp.SKU + '_3?$SC_3243$', ep.RoomID
From Product zp(nolock) Inner Join RF_ExtendedProduct ep(nolock) On ep.ProductID = zp.ProductID
Where zp.ActiveInd = 1 And SUBSTRING(zp.SKU, 1, 2) <> 'GC' AND zp.Name <> 'PLATINUM' AND zp.SKU = (Case When #PRODUCT_SKU Is Not Null Then #PRODUCT_SKU Else zp.SKU End)
End
declare #curr_row int = 0,
#tot_rows int= 0,
#sku nvarchar(15) = null;
IF OBJECT_ID('tempdb..##TSku', 'U') IS NOT NULL
BEGIN
DROP TABLE ##TSku
END
Create Table ##TSku (tid int identity(1,1), relsku nvarchar(15));
Select #curr_row = (Select MIN(RowId) From ##RelPro);
Select #tot_rows = (Select MAX(RowId) From ##RelPro);
while #curr_row <= #tot_rows
Begin
select #sku = SKU from ##RelPro where RowID = #curr_row;
truncate table ##TSku;
Insert ##TSku(relsku)
Select distinct top(10) tzp.SKU From Product tzp(nolock) INNER JOIN
[INTRANET].raf_FocusAssociatedItem assoc(nolock) ON assoc.associatedItemID = tzp.SKU
Where (assoc.isActive=1) And (tzp.ActiveInd = 1) AND (assoc.productID = #sku)
declare #curr_row1 int = (Select Min(tid) From ##TSku),
#tot_rows1 int = (Select Max(tid) From ##TSku);
If(#tot_rows1 <> 0)
Begin
While #curr_row1 <= #tot_rows1
Begin
declare #col_name nvarchar(15) = null,
#sqlstat nvarchar(500) = null;
set #col_name = 'Assoc_Item_' + Convert(nvarchar(2), #curr_row1);
set #sqlstat = 'update ##RelPro set ' + #col_name + ' = (Select relsku From ##TSku Where tid = ' + Convert(nvarchar(2), #curr_row1) + ') Where RowID = ' + Convert(nvarchar(2), #curr_row);
Exec(#sqlstat);
set #curr_row1 = #curr_row1 + 1;
End
End
set #curr_row = #curr_row + 1;
End
Select * From ##RelPro;
END
GO
I don't think that is possible (though refer to the update below); as far as I know a table variable only exists within the scope that declared it. You can, however, use a temp table (use the create table syntax and prefix your table name with the # symbol), and that will be accessible within both the scope that creates it and the scope of your dynamic statement.
UPDATE: Refer to Martin Smith's answer for how to use a table-valued parameter to pass a table variable in to a dynamic SQL statement. Also note the limitation mentioned: table-valued parameters are read-only.
Here is an example of using a dynamic T-SQL query and then extracting the results should you have more than one column of returned values (notice the dynamic table name):
DECLARE
#strSQLMain nvarchar(1000),
#recAPD_number_key char(10),
#Census_sub_code varchar(1),
#recAPD_field_name char(100),
#recAPD_table_name char(100),
#NUMBER_KEY varchar(10),
if object_id('[Permits].[dbo].[myTempAPD_Txt]') is not null
DROP TABLE [Permits].[dbo].[myTempAPD_Txt]
CREATE TABLE [Permits].[dbo].[myTempAPD_Txt]
(
[MyCol1] char(10) NULL,
[MyCol2] char(1) NULL,
)
-- an example of what #strSQLMain is : #strSQLMain = SELECT #recAPD_number_key = [NUMBER_KEY], #Census_sub_code=TEXT_029 FROM APD_TXT0 WHERE Number_Key = '01-7212'
SET #strSQLMain = ('INSERT INTO myTempAPD_Txt SELECT [NUMBER_KEY], '+ rtrim(#recAPD_field_name) +' FROM '+ rtrim(#recAPD_table_name) + ' WHERE Number_Key = '''+ rtrim(#Number_Key) +'''')
EXEC (#strSQLMain)
SELECT #recAPD_number_key = MyCol1, #Census_sub_code = MyCol2 from [Permits].[dbo].[myTempAPD_Txt]
DROP TABLE [Permits].[dbo].[myTempAPD_Txt]
Using Temp table solves the problem but I ran into issues using Exec so I went with the following solution of using sp_executesql:
Create TABLE #tempJoin ( Old_ID int, New_ID int);
declare #table_name varchar(128);
declare #strSQL nvarchar(3072);
set #table_name = 'Object';
--build sql sting to execute
set #strSQL='INSERT INTO '+#table_name+' SELECT '+#columns+' FROM #tempJoin CJ
Inner Join '+#table_name+' sourceTbl On CJ.Old_ID = sourceTbl.Object_ID'
**exec sp_executesql #strSQL;**
Need to run dynamic SQL against DB2 on MS SQL through OpenQuery, get results back in JSON, then return this as an Output Parameter in a Stored Procedure
I've tried using a table variable as the sample code shows, but I get this error:
The FOR JSON clause is not allowed in a INSERT statement
I've also tried wrapping the query into a CTE, but given the JSON column name changes I can't use * or I get this error:
No column name was specified for column 1 of 'tbl'.
So I'm at a loss. I need to run this and get the JSON in the Output parameter, but given I'm having to mix a call to DB2 through OpenQuery and dynamic SQL to set the parameter I can't find a syntax that works.
create procedure uspTesting (
#inAccountNumber nvarchar(20),
#outJSON nvarchar(max) output)
as
begin declare #result table (ResultJson nvarchar(max));
declare #tsql nvarchar(4000) = '
select name, age
from openquery(db2link,''
select name,
age
from db2.account
where accountnumber = ''''' + #inAccountNumber + ''''')'') tbl for json auto';
insert into #result
EXEC (#TSQL);
select #outJSON = ResultJson from #result; End
The results I'm looking for are the JSON string in the output parameter #outJSON.
Apply the FOR JSON after you've gotten the data, load it into a temp table and then use the FOR JSON.
Without test data, etc you might have to adjust this, but try something like:
CREATE PROCEDURE [uspTesting]
(
#inAccountNumber NVARCHAR(20)
, #outJSON NVARCHAR(MAX) OUTPUT
)
AS
BEGIN
DECLARE #result TABLE
(
[name] NVARCHAR(100) --whatever data type you need here
, [age] NVARCHAR(100)
);
DECLARE #tsql NVARCHAR(4000) = '
select name, age
from openquery(db2link,''
select name,
age
from db2.account
where accountnumber = ''' + #inAccountNumber + ''')';
--Here we will just load a table variable with the data.
INSERT INTO #result
EXEC ( #tsql );
--Then we will select from that table variable applying the JSON here.
SET #outJSON = (
SELECT *
FROM #result
FOR JSON AUTO
);
END;
In SQL Server in a stored procedure, I want to get the value in a column of a single-row table given the column name, and assign that value to a variable. The column name may be different every time (I use T-SQL to interrogate the schema at run time).
The example given below is as minimal as I can make it, the important thing is that you cannot assume that the column name will always be entity_client, it could be anything at all, though (due to interrogation of INFORMATION SCHEMA) we will have the value assigned to the variable #entity_column_name.
Example preparation SQL:
IF OBJECT_ID('tempdb..#foo') IS NOT NULL
BEGIN;
DROP TABLE #foo;
END;
CREATE TABLE #foo
(
id INT,
entity_client NVARCHAR(255)
);
INSERT INTO #foo VALUES (1, 'clientcode|client_number');
DECLARE #entity_column_name NVARCHAR(255) = 'entity_client';
DECLARE #entity_column_value NVARCHAR(255);
I have tried the following:
SELECT TOP 1 #entity_column_name = [#entity_column_value]
FROM #foo;
...which generates an error
Invalid column name '#entity_column_value'
I have also tried:
EXEC('SELECT TOP 1 #entity_column_value = [' + #entity_column_name + '] FROM #foo;');
which generates another error
Must declare the scalar variable "#entity_column_value"
The following works, but unfortunately the column name is hard-coded - I wanted to be able to vary the column name:
SELECT TOP 1 #entity_column_value = [entity_client]
FROM #foo;
Yes, I have looked on SO and found the following questions, but they do not provide an answer where the value is assigned to a variable, in both cases the SELECT output is simply dumped to screen:
Get column value from string column name sql
Get column value from dynamically achieved column name
This will actually work but you need to declare the output variable:
DECLARE #entity_column_name NVARCHAR(255) = 'entity_client';
DECLARE #entity_column_value NVARCHAR(255);
DECLARE #tsql NVARCHAR(1000) = 'SELECT TOP 1 #entity_column_value = [' + #entity_column_name + '] FROM #foo;'
EXEC sp_executesql #tsql, N'#entity_column_value NVARCHAR(255) OUTPUT',
#entity_column_value OUTPUT;
SQL Server allows me to insert the returned result set of a stored procedure as:
DECLARE #T TABLE (
ID int,
Name varchar(255),
Amount money)
INSERT INTO #T
exec dbo.pVendorBalance
This works as long as the stored procedure only returns 1 result set.
Is there a way to make this work if the stored procedure returns several result sets?
E.g.
DECLARE #T1 (...)
DECLARE #T2 (...)
INSERT INTO #T1 THEN INTO #T2
exec dbo.pVendorBalance
One workaround to this problem is using OUTPUT parameters (JSON/XML) instead of resultsets.
CREATE TABLE tab1(ID INT, Name NVARCHAR(10), Amount MONEY);
INSERT INTO tab1(ID, Name, Amount)
VALUES (1, 'Alexander', 10),(2, 'Jimmy', 100), (6, 'Billy', 20);
CREATE PROCEDURE dbo.pVendorBalance
AS
BEGIN
-- first resultset
SELECT * FROM tab1 WHERE ID <=2;
-- second resultset
SELECT * FROM tab1 WHERE ID > 5;
END;
Version with OUT params:
CREATE PROCEDURE dbo.pVendorBalance2
#resultSet1 NVARCHAR(MAX) OUT,
#resultSet2 NVARCHAR(MAX) OUT
AS
BEGIN
SELECT #resultSet1 = (SELECT * FROM tab1 WHERE ID <=2 FOR JSON AUTO),
#resultSet2 = (SELECT * FROM tab1 WHERE ID > 5 FOR JSON AUTO);
END;
And final call:
DECLARE #r1 NVARCHAR(MAX), #r2 NVARCHAR(MAX);
EXEC dbo.pVendorBalance2 #r1 OUT, #r2 OUT;
-- first resultset as table
SELECT *
INTO #t1
FROM OpenJson(#r1)
WITH (ID int '$.ID', [Name] NVARCHAR(50) '$.Name',Amount money '$.Amount');
-- second resultset as table
SELECT *
INTO #t2
FROM OpenJson(#r2)
WITH (ID int '$.ID', [Name] NVARCHAR(50) '$.Name',Amount money '$.Amount');
SELECT * FROM #t1;
SELECT * FROM #t2;
DBFiddle Demo
EDIT:
Second approach is to use tSQLt.ResultSetFilter CLR function (part of tSQLt testing framework):
The ResultSetFilter procedure provides the ability to retrieve a single result set from a statement which produces multiple result sets.
CREATE TABLE #DatabaseSize (
database_name nvarchar(128),
database_size varchar(18),
unallocated_space varchar(18)
);
CREATE TABLE #ReservedSpaceUsed (
reserved VARCHAR(18),
data VARCHAR(18),
index_size VARCHAR(18),
unused VARCHAR(18)
);
INSERT INTO #DatabaseSize
EXEC tSQLt.ResultSetFilter 1, 'EXEC sp_spaceused';
INSERT INTO #ReservedSpaceUsed
EXEC tSQLt.ResultSetFilter 2, 'EXEC sp_spaceused';
SELECT * FROM #DatabaseSize;
SELECT * FROM #ReservedSpaceUsed;
No. But there is more of a work around since you cannot do an insert into with a procedure that returns multiple results with a different number of columns.
If you are allowed to modify the stored procedure, then you can declare temp tables outside of the procedure and populate them within the stored procedure. Then you can do whatever you need with them outside of the stored procedure.
CREATE TABLE #result1(Each column followed by data type of first result.);
----Example: CREATE TABLE #result1(Column1 int, Column2 varchar(10))
CREATE TABLE #result2(Each column followed by data type of second result.);
EXEC pVendorBalance;
SELECT * FROM #result1;
SELECT * FROM #result2;
I had a similar requirement, and ended up using the a CLR function which you can read about here (it's the answer with the InsertResultSetsToTables method, by user Dan Guzman):
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/da5328a7-5dab-44b3-b2b1-4a8d6d7798b2/insert-into-table-one-or-multiple-result-sets-from-stored-procedure?forum=transactsql
You need to create a SQL Server CLR project in Visual Studio to get going. I had a project already written by a co-worker that I could just expand, but if you're starting from scratch, try reading this guide:
http://www.emoreau.com/Entries/Articles/2015/04/SQL-CLR-Integration-in-2015-year-not-product-version.aspx
If you've succeeded in writing and publishing the CLR project to the database, here is an example of using it I wrote:
-- declare a string with the SQL you want to execute (typically an SP call that returns multiple result sets)
DECLARE #sql NVARCHAR(MAX)
SET #sql = 'exec usp_SomeProcedure #variable1 = ' + #variable1 + '...' -- piece together a long SQL string from various parameters
-- create temp tables (one per result set) to hold the output; could also be actual tables (non-temp) if you want
CREATE TABLE #results_1(
[CustomerId] INT, [Name] varchar(500), [Address] varchar(500)
);
CREATE TABLE #results_2(
[SomeId] UNIQUEIDENTIFIER, [SomeData] INT, [SomethingElse] DateTime
);
-- on the exemplary 'CustomerDatabase' database, there is an SP (created automatically by the SQL CLR project deployment process in Visual Studio) which performs the actual call to the .NET assembly, and executes the .NET code
-- the CLR stored procedure CLR_InsertResultSetsToTables executes the SQL defined in the parameter #sourceQuery, and outputs multiple result sets into the specified list of tables (#targetTableList)
EXEC CustomerDatabase.dbo.CLR_InsertResultSetsToTables #sourceQuery = #sql, #targetTableList = N'#results_1,#results_2';
-- The output of the SP called in #sql is now dumped in the two temp tables and can be used for whatever in regular SQL
SELECT * FROM #results_1;
SELECT * FROM #results_2;
We can do it in the following way
Consider the input SP (which returns 2 tables as output) as usp_SourceData
Alter the usp_SourceData to accept a parameter as 1 and 2
Adjust the SP in a way that when
usp_SourceData '1' is executed it will return first table
and when
usp_SourceData '2' is executed it will return second table.
Actually stored procedures can return multiple result sets, or no result sets, it's pretty arbitrary. Because of this, I don't know of any way to navigate those results from other SQL code calling a stored procedure.
However, you CAN use the returned result set from a table-valued user defined function. It's just like a regular UDF, but instead of returning a scalar value you return a query result. Then you can use that UDF like any other table.
INSERT INTO #T SELECT * FROM dbp.pVendorBalanceUDF()
http://technet.microsoft.com/en-us/library/ms191165(v=sql.105).aspx
DROP TABLE ##Temp
DECLARE #dtmFrom VARCHAR(60) = '2020-12-01 00:00:00', #dtmTo VARCHAR(60) = '2020-12-02 23:59:59.997',#numAdmDscTransID VARCHAR(60) =247054
declare #procname nvarchar(255) = 'spGetCashUnpaidBills',
#procWithParam nvarchar(255) = '[dbo].[spGetCashUnpaidBills] #dtmFromDate= ''' +#dtmFrom+ ''' ,#dtmToDate= ''' +#dtmTo+''',#numCompanyID=1,#numAdmDscTransID='+ #numAdmDscTransID +',#tnyShowIPCashSchemeBills=1',
#sql nvarchar(max),
#tableName Varchar(60) = 'Temp'
set #sql = 'create table ##' + #tableName + ' ('
begin
select #sql = #sql + '[' + r.name + '] ' + r.system_type_name + ','
from sys.procedures AS p
cross apply sys.dm_exec_describe_first_result_set_for_object(p.object_id, 0) AS r
where p.name = #procname
set #sql = substring(#sql,1,len(#sql)-1) + ')'
execute (#sql)
execute('insert ##' + #tableName + ' exec ' + #procWithParam)
end
SELECT *FROM ##Temp
If the both result sets have same number of columns then
insert into #T1 exec dbo.pVendorBalance
will insert the union of both data set into #T1.
If not
Then edit dbo.pVendorBalance and insert results into temporary tables and in outer stored proc, select from those temporary tables.
Another way(If you need it), you can try
SELECT * into #temp
from OPENROWSET('SQLNCLI', 'Server=(local)\\(instance);Trusted_Connection=yes;',
'EXEC dbo.pVendorBalance')
it will take first dataset.
Below is the code where I am getting a columns name dynamically(example F8 is the column name) and storing it in #whcode. What i need is the value that is stored in this column for the where condition specified below. I can see the value stored in the column is 2 but I cannot get it. What it is returning me is the column name itself. How can I get the value in the column. Please help.
declare #count1 int
set #count1 = (select min(srno) from TEMP_STOCK_uPDATE)
declare #whcode varchar(20)
select * from TEMP_STOCK_uPDATE where srno='16091'
set #whcode=(SELECT COLUMN_NAME
FROM Ecata_New.INFORMATION_SCHEMA.COLUMNS
where Table_Name = 'TEMP_STOCK_uPDATE'
and COLUMN_NAME =(select whcode from dbo.temp_stock_map where func=(select func from dbo.temp_stock_map where sr_no=6)))
--select #whcode as 'abcd'
select #whcode as 'abc'
from TEMP_STOCK_uPDATE
where
F1=(select F1 from dbo.TEMP_STOCK_uPDATE where srno=#count1)
You can build your SQL statement dynamically to do this. Build your statement in a varchar and then EXEC it.
DECLARE #SQL VARCHAR(4000)
SET #SQL = 'select ' + #whcode + ' from TEMP_STOCK_uPDATE where F1=(select F1 from dbo.TEMP_STOCK_uPDATE where srno=#count1)'
EXEC (#SQL)