Hi I am trying to install the typescript definition manager (TSD) on my Ubuntu 14.04 VM. I am following the '5 minute tutotial' from Angular.
It says to run
npm install -g tsd#^0.6.0
After that I am supposed to run
tsd install angular2 es6-promise rx rx-lite
Anyway, after running the last command Ubuntu simply returns
tsd: command not found
Can anyone help here?
Can you run the npm install -g tsd again, it should output the location where it installs it for you.
In this case that location isn't added to your path variable and you should use a absolute location (or add it to your path).
You should be able to do this in ubuntu by creating a ~/.profile file with
export PATH=$PATH:/path/to/tsd/folder/
The problem in my case seemed to be the nodejs version on my Ubuntu VM. I created a new VM and installed nodejs the following way
cd /usr/local/src
wget http://nodejs.org/dist/v0.12.7/node-v0.12.7.tar.gz
tar -xvzf node-v0.12.7.tar.gz
cd node-v0.12.7
./configure
make
sudo make install
which node
After this I could run
tsd install angular2 es6-promise rx rx-lite
and everything worked as expected. SO I believe updating the my nodejs was the solution. It seems that my old nodejs did not add tsd to the path
Can anyone help here?
Check your node version. Recommend you use latest iojs. It works as shown :
Related
I have installed opam 2.1.0 on a Linux Virtualbox VM. When I try opam init, I get the following error:
<><> Fetching repository information ><><><><><><><><><><><><><><><><><><><><><>
[ERROR] Could not update repository "default": OpamDownload.Download_fail(_, "Curl
failed: \"/snap/bin/curl --write-out %{http_code}\\\\n --retry 3
--retry-delay 2 --user-agent opam/2.1.0 -L -o
/tmp/opam-32196-d33843/index.tar.gz.part --
https://opam.ocaml.org/index.tar.gz\" exited with code 23")
[ERROR] Initial download of repository failed.
Running with --disable-sandboxing doesn't help. I know that its a problem creating/writing to /tmp/opam-... directory because if I replace that with my current directory or home directory the command by itself runs fine. It also runs fine with /tmp/opam-... if I use the --create-dirs option in curl but I don't have any way of getting opam init to use that option. Any ideas?
thanks
Update
The reason opam init failed for me was because curl was installed with snap on my system. This exactly what is going on with your VM.
Try to run opam init -verbose and that could reveal more about why you ran into an error.
In my case I needed to install other things with opam and it kept failing every time. So snap uninstall curl and then sudo apt install curl fixed things. (Was only able to figure this out with help from my professor)
Workaround
I ran into the same issue and I found a workaround on the OCaml forum: here. (Credits to UnixJunkie)
You can run:
opam init github git+https://github.com/ocaml/opam-repository.git
This should avoid the certificate issues. This worked for me.
I tried to fix the certificate issues using this answer as well. You could try doing that, but it seems complicated when the workaround is to simply point it to the github repo directly.
This question is similar to this one.
I am trying to create a library in Angular using nx g #nrwl/angular:lib shared but it keep giving me error zsh: command not found: nx. All I did was before just create a angular project.
I try using this: npm install -g nx so maybe it install nx and it works, but I still keep getting the same error.
How can I fix this? I am using Mac.
If any questions or information needed please feel free to leave the comment down below.
sudo npm install -g nx fixed, sudo might be needed...
Try this: Install it globally by below command 100% will work
sudo npm i -g #nrwl/cli
remove -g if you don't want to install globally.
Either you don't have refreshed your zsh paths, which can be fixed by opening a new terminal or type
rehash
in the prompt.
If this doesn't work then nx isn't globally installed on your machine. You have to type
npm run nx [your command] instead of just "nx" to use it, so in your case:
npm run nx -- g #nrwl/angular:lib shared
Sources: https://nx.dev/latest/angular/cli/overview#installing-the-cli
Do we really need to install #nrwl/cli ?
Just installing the nx resolve the issue for me
sudo npm install -g nx#latest
Installing the nrwl cli globally should do the trick, you'll need to enter the super user mode to do it.
sudo npm i -g #nrwl/cli
Alternative solutions can be found on the guide on the Nx Website here
https://nx.dev/l/a/tutorial/01-create-application
Try this:
yarn global add #nrwl/cli
I am trying to create a new react project, but when I run npx create-react-app tik-tok-clone I get the following error
Creating a new React app in C:\Users\mwars\Documents\GitHub\TikTok-Clone\tik-tok-clone.
Installing packages. This might take a couple of minutes.
Installing react, react-dom, and react-scripts with cra-template...
yarn add v1.22.4
[1/4] Resolving packages...
[2/4] Fetching packages...
error postcss#8.1.3: The engine "node" is incompatible with this module. Expected version "^10 || ^12 || >=14". Got "13.12.0"
error Found incompatible module.
info Visit https://yarnpkg.com/en/docs/cli/add for documentation about this command.
Aborting installation.
yarnpkg add --exact react react-dom react-scripts cra-template --cwd C:\Users\mwars\Documents\GitHub\TikTok-Clone\tik-tok-clone has failed.
Deleting generated file... package.json
Deleting generated file... yarn.lock
Deleting tik-tok-clone/ from C:\Users\mwars\Documents\GitHub\TikTok-Clone
Done.
I've been trying to figure it out for a while now and just can't get it to work.
I am was dealing with the same problem and have managed to understand and fix it. I will try to explain it below.
The issue:
error postcss#8.1.3: The engine "node" is incompatible with this module. Expected version "^10 || ^12 || >=14". Got "13.12.0"
This is telling you that the create_react_app module is only compatible with versions 10, 12, or greater than 14 of node and you are using 13.12.0.
The solution
To fix this error you need to either upgrade or downgrade your current version of node.
One way to do this is to use NVM (node version manager) to manage multiple versions of node.
To install it with either Linux or Mac you can use either of the following commands
For Wget, run the following command on the terminal:
wget -qO- https://raw.githubusercontent.com/nvm-sh/nvm/v0.35.3/install.sh | bash
For CURL, run the following:
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.35.3/install.sh | bash
You will want to change the version number in the commands to the latest stable version.
Once you have downloaded it successfully restart the terminal or you won't be able to find it. If this fails you may need to reset your computer.
If you have NVM installed running the following should show you the current version of it your using.
nvm --version
You can then use the following command to list available versions of node
nvm ls-remote
Select a compatible version and install it like so
nvm install 14.15.0
Running
node -v
Should show this as your current version if not try
nvm use v14.15.0
You should now have no issues running
npx create-react-app tik-tok-clone
It worked for me after running these commands.
sudo npm cache clean -f //clear you npm cache
sudo npm install -g n install n //(this might take a while)
sudo n stable upgrade //to the current stable version
Folks,
I am working on Win 7 professional.
Versions of various utilities on my computer are as follows:
Nodejs : v0.10.8
npm: v1.2.23
I am trying to seed the Angular application using Yeoman. I have followed the following instructions
First install yo,bower and grunt
npm install -g yo grunt-cli bower
Goto the directory where I want to create my webapp and run
c:\somefolder>yo angular
Runt the grunt server
C:>grunt server
Steps 1 and 2 above run fine but on step 3 I get the following errors
C:\somefolder>grunt -server
Running "clean:dist" (clean) task
Running "jshint:all" (jshint) task
3 files lint free.
Running "clean:server" (clean) task
Running "coffee:dist" (coffee) task
Running "coffee:test" (coffee) task
Running "compass:dist" (compass) task
Warning: You need to have Ruby and Compass installed and in your system PATH for this task to work. More info: https://github.com/gruntjs/grunt-contrib-compass Use --force to continue.
Aborted due to warnings.
Now I do have ruby installed and its available in PATH variable.
C:>ruby --version
ruby 2.0.0p195 (2013-05-14) [i386-mingw32]
How do I oversome this? How do i ensure that grunt server does not abort ?
Any help will be highly appreciated.
gem install compass
also here:
https://rubygems.org/gems/compass
I had the same problem as you mentioned and I noticed that Compass had to be called as compass2.0 so I symlinked compass to compass2.0 and it solved the problem.
Here's the command:
sudo ln -s /usr/bin/compass2.0 /usr/bin/compass
Hope this helps
I had this problem on OS X. Here is the series of commands I eventually used to get everything installed and working: https://gist.github.com/kristopherjohnson/f1d7e4d1c31ae3b0899e
FWIW, it seems like the missing piece for me was gem install sass. In theory, gem install compass should have installed Sass too, but explicitly installing Sass made the error disappear.
I am trying to use the static binary of wkhtmltopdf on Ubuntu server 10.0.4. The reason for is that it apparently has a built in modified QT that will allow me to run wkhtmltopdf without an X Server.
Result:
Once installed (see steps below), when I execute wkhtmltopdf in the terminal, it does not fire up... just returns me to the prompt - like it ran and did something, no error but no output:
:/usr/bin$ wkhtmltopdf
:/usr/bin$
Same behavior if I put args:
:/usr/bin$ wkhtmltopdf http://www.google.com test.pdf
:/usr/bin$
Am I doing something wrong --- my understanding that the static binary should just fire up. Perhaps missing some dependency? Is there a way to get some verbose output?
These are the steps I have followed:
In /usr/bin:
1) Confirmed that the existing (non-static) wkhtmltopdf resides there and that it executes. When I execute it with no args I get the help/about output from the app.
2) Moved the existing wkhtmltopdf out of the directory (renamed it)
3) Get the static binary: sudo curl -C - -O http:
//wkhtmltopdf.googlecode.com/files/wkhtmltopdf-0.9.9-static-i386.tar.bz2
4) Untar: tar xvjf wkhtmltopdf-0.9.9-static-i386.tar.bz2
5) Rename: mv wkhtmltopdf-i386 wkthtmltopdf
6) Get (apparently) necessary packages: sudo apt-get install openssl build-essential xorg libssl-dev
I was having the same problem. I removed the existing wkhtmltopdf and followed the steps below and the installation worked.
First, installing dependencies
sudo aptitude install openssl build-essential xorg libssl-dev
for 64-bit OS
wget http://wkhtmltopdf.googlecode.com/files/wkhtmltopdf-0.9.2-static-amd64.tar.bz2
tar xvjf wkhtmltopdf-0.9.2-static-amd64.tar.bz2
chown root:root wkhtmltopdf-amd64
mv wkhtmltopdf-amd64 /usr/bin/wkhtmltopdf
The only difference is that I put it in /usr/local/bin/wkhtmltopdf.
I hope this helps!
Following deb's answer got it working for me on Ubuntu 10.04 64bit - thanks!
Although rather than downloading 0.9.2 as per deb's instructions, I would suggest people download the latest version by:
Go to http://code.google.com/p/wkhtmltopdf/downloads/list
Download the latest version of wkhtmltopdf-[version number]-static-amd64.tar.bz2
At this time, the latest 64bit is http://wkhtmltopdf.googlecode.com/files/wkhtmltopdf-0.11.0_rc1-static-amd64.tar.bz2.
In my debian server trying to run wkhtmltopdf-i386 lead to same blank prompt.
Non-static (with non-patched QT) version of wkhtmltopdf installed with "aptitude install wkhtmltopdf" is worked.
Problem solved by switching to wkhtmltopdf-amd64, server was a 64 bit and i missed it.
After that, wkhtmltopdf-amd64 says 'libxrender shared library not found', this problem was solved by "aptitude install xorg"
0.11.0_rc1 seems to be buggy.
It keeps throwing the error "Cannot create a QPixmap when no GUI is being used".
Reverting to 0.9.9 worked for me.