Hi I'm developing rails project with sunspot solr and configuring Solr Cloud.
My environment: rails 3.2.1, ruby 2.1.2, sunspot 2.1.0, Solr 4.1.6.
Why SolrCloud: I need more stable system - oftentimes search server goes on maintenance and web application stop working on production. So, I think about how to make 2 identical search servers instead of one, to make system more stable: if one server will be down, other will continue working.
I cannot find any good turtorial with simple, easy to understand and described in details turtorial...
I'm trying to set up SolrCloud on two servers, but I do not fully understand how it is working inside:
synchronize data between two servers (is it automatic action?)
balances search requests between two servers
when one server suddenly stop working other should become a master (is it automatic action?)
is there SolrCloud features other than listed?
Read more about SolrCloud here..! https://wiki.apache.org/solr/SolrCloud
Couple of inputs from my experience.
If your application just reads data from SOLR and does not write to SOLR(in real time but you index using an ETL or so) then you can just go for Master Slave hierarchy.
Define one Master :- Point all writes to here. If this master is down you will no longer be able to index the data
Create 2(or more) Slaves :- This is an feature from SOLR and it will take care of synchronizing data from the master based on the interval we specify(Say every 20 seconds)
Create a load balancer based out of slaves and point your application to read data from load balancer.
Pros:
With above setup, you don't have high availability for Master(Data writes) but you will have high availability for data until the last slave goes down.
Cons:
Assume one slave went down and you bought it back after an hour, this slave will be behind the other slaves by one hour. So its manual task to check for data consistency among other slaves before adding back to ELB.
How about SolrCloud?
No Master here, so you can achieve high availability for Writes too
No need to worry about data inconsistency as I described above, SolrCloud architecture will take care of that.
What Suits Best for you.
Define a external Zookeeper with 3 nodes Quorom
Define at least 2 SOLR severs.
Split your Current index to 2 shards (by default each shard will reside one each in 2 solr nodes defined in step #2
Define replica as 2 (This will create replica for shards in each nodes)
Define an LB to point to above solr nodes.
Point your Solr input as well as application to point to this LB.
By above setup, you can sustain fail over for either nodes.
Let me know if you need more info on this.
Regards,
Aneesh N
-Let us learn together.
Related
We are planning to implement SolrCloud in our solution (mainly for data replication reasons and disaster recovery), unfortunately some of our customers have only 2DCs - and one DC may be completely destroyed.
We are aware that running ZK in 2 locations is problematic, as ZK requires quorum. And downtime on any side with 2 ZK nodes would cause cluster failure. And cluster failure would be also triggered by network partition between locations (master will cease to be master due to quorum lost, slave can't elect himself for the same reason).
--
So our current plan A is to go with a single ZK for both sites and backup ZK into the other site. So if the site withou ZK dies, we are OK. If the site with ZK dies, we should be able to start new ZK from backup and reconfigure Solr.
--
We also considered plan B with classic master-slave replication between the sites. BUT we are using Time Routed Aliases, hence we need SolrCloud features, hence we would need also to replicate data/configuratin in ZooKeeper (not only Solr index). So this case seems only as more manual work in Solr, while we would still need to backup/restore ZK. So this plan was rejected.
--
Plan C may be to have 2ZK, but one with with bigger weight. This should survive partition and dead of ZK with lower weight. The first ZK node should be automatically backed up using standard cluster mechanics. But I do not even know about anyone using ZK this way...
--
Is there any smarter way, how to setup SolrCloud in 2 nodes environment? Which solution should we prefer?
We do not expect High Availability; we want to achieve disaster recovery. Administrator intervention is expected in case of node failure, we only need to be resilient to short network glitches.
Edit: CDCR (Cross Data Center Replication) with Time Routed Aliases
We are considering to use TRA, because our data are time based, and customers are usually interested only in latest slice/partition. Without TRA, the index grows and performance degrades, more (unused/old) stuff is in index & RAM...
Here comes a problem with CDCR, according to docs, the source&target collection parameters are required. But with TRA, collections are created with the same solrconfig.xml automatically (every X days/months). This problem in CDCR is known (see comments), but not resolved yet.
Also it seems that CDCR really does not synchronize ZooKeeper (I have not found any mentions of the functionality in docs, jira and in code), which may be ok with static number of collections, but is very problematic with dynamically created collections (especially by some machinery in background outside users/developers code).
Edit: According to David (the main author of TRA), CDCR&TRA combination is not to be supported.
Solr 3x "Repeaters" and Multiple Data Centers:
Solr 3x let a node behave as both a slave and master, pull from one master, and then feed copies downstream to its own slaves. This was so common/useful it even had a name, a "Repeater".
This was useful if you wanted span multiple data centers. You could have the real master in data center A (DCA), and a "repeater" in data center B (DCB). That repeater would then grab content from DCA and feed all of the other nodes in DCB, saving on bandwidth.
Suppose you want to upgrade this setup to Solr 4x and SolrCloud. (Note that Solr 4x still supports Solr 3x-style legacy replication)
It's said that you should NOT have a single SolrCloud cluster span disparate data centers. So data center B should have it's own SolrCloud.
One idea is to have the DCA -> DCB link still use Solr 3x-style Master/Slave replication. And then the "repeater" in DCB, being also a SolrCloud node, would automatically be propagated to other nodes.
Main question:
Can a Solr node participate in both Solr 3x-style master/slave mode (as a slave) and also be part of a SolrCloud cluster? And if so, how is this configured?
Complications:
In the simple case, if it's just 1 shard with replicas, it's easy to see how that might work in terms of data. It's a little less clear if you have multiple shards in DCB, how do I tell each shard to only replicate its own share of data? Note that SolrCloud normally replicates via transactions, whereas 3x uses binary indices.
Another complexity is if you're doing replication. How do you tell just the master node for each shard to pull from the remote DCA node?
Alternatives:
On solution is to upgrade to 4x but continue using 3x-style replication in DCB, so just don't use SolrCloud.
I realize that another solution would be to have the data feed send it's updates to both data centers, or usE something like RabbitMQ. For the sake of this question, let's assume thats not an option (long story...)
Maybe there's some other way I haven't thought of?
Has anybody actually tried having SolrCloud span data centers? How horrible is it?
Somebody must have asked this question before!
But I've looked on Google and, although it finds tons of pages with the keywords, I haven't seen this specific "hybrid" mode fleshed out. I found one thread from 2013 but it didn't really talk about the configuration and complexity.
To answer your first question, a Solr slave in 3.X style cannot be a node in a Solr Cloud. The reason is the slave in a master/slave 3.X Solr config simply replicates, byte for byte, all the index files on the master. That's all it does. It can, in the repeater config, then also be a master for others to replicate from, or be a dedicated query slave or both. But that's it.
A node in a Solr Cloud config is a full participant in a distributed computing cluster where indexing is generally intended to be distributed across all nodes, and all nodes participate in queries. It's a very powerful feature which automatically handles failed nodes and significantly eases the work load of scaling up that was very manual in 3.X style.
However, part of what you pay for that is increased complexity (Zookeeper), requirements for lower latency inter-node communications (because all the nodes now talk to each other and to Zookeeper) and the loss of the simplicity of Master/Slave replication.
At 20M docs you are well within the constraints of a single node master index with an effectively unlimited number of slaves and therefor very high query capacity. I do this today with a production environment where each master has on the order of 60M docs in it with no significant problems.
The question is do you need NRT, multi-node indexing, automated failover, the ability to autoscale well past 100M docs? If so then Master/Slave it probably not going to work for you.
You could take a look at writing the same data to two different Solr Cloud clusters, one in each datacenter. You could do that directly, or use something like Apache Flume to do it for you - in either there are some issues with doing this and so the real question is are dealing with those issues worth it to get the added benefit of Solr Cloud?
Currently we have 2 servers with a load-balancer before them. We want to be able to turn 1 machine off and later on, without the user noticing it.
Our application also uses solr and now i wanted to install & configure solr on both servers and the question is how do i configure a master-master replication?
After my initial research i found out that it's not possible :(
But what are my options here? I want both indices to stay in sync and when a document is commited on one server it should also go to the other.
Thanks for your help!
Not certain of your specific use case (why turn 1 server on and off?), there is no specific "master-master" replication. Solr does however support distributed indexing and querying via SolrCloud. From the documentation for SolrCloud:
Replication ensures redundancy for your data, and enables you to send
an update request to any node in the shard. If that node is a
replica, it will forward the request to the leader, which then
forwards it to all existing replicas, using versioning to make sure
every replica has the most up-to-date version. This architecture
enables you to be certain that your data can be recovered in the event
of a disaster, even if you are using Near Real Time searching.
It's a bit complex so I'd suggest you spend some time going thru the documentation as it's not quite as simple as setting up a couple of masters and load balancing between them. It is a big step up from the previous master/slave replication that Solr used, so even if it's not a perfect fit it will be a lot closer to what you need.
https://cwiki.apache.org/confluence/display/solr/SolrCloud
https://cwiki.apache.org/confluence/display/solr/Getting+Started+with+SolrCloud
You can just create a simple master - slave replication as described here:
https://cwiki.apache.org/confluence/display/solr/Index+Replication
But be sure you send your inserts, deletes, updates directly to the master, but selects can go through the load balancer.
The other alternative is to create a third server as a master, and 2 slaves, and the lode balancer can be in front of the two slaves.
I would like to run two Solr instances on different computers as a cluster.
My main interest is High availability - meaning, in case one server crashes or is down there will be always another one.
(my performances on a single instance are great. I do not need to split the data to two servers.)
Questions:
1. What is the best practice?
Is it different than clustering for index splitting? Do I need Shards?
2. Do I need zoo keeper?
3. Is it a container based configuration (different for jetty and tomcat)
4, Do I need an external NLB for that ?
5. When one computer is up after crashing. how dows it updates its index?
You can define numShards=1 and that's it. You need a single slice replicated for that. If you want automated cluster management and hot replication - yes, you need SolrCloud mode and ZooKeeper. Speaking about load balancing, it depends on your architecture. If you are going to use SolrJ, there is a basic load balancing implementation there.
When a node initializes, it enters the recovery stage. During the recovery stage it synchronizes with the other existing replicas as well as with its own transaction log. If its index version is old, it gets a newer version from other server.
While using Solr (we are currently using 3.5), how do we setup the Masters for a Failover?
Lets say in my Setup I have Two Masters and Two Slaves. The Application commits all the writes to One Active Master, and both the slaves get the updates from this Active Master. There is another repeater which serves the same purpose of the Master.
Now my question is if the Master for some reason comes down, how can I make the Repeater as a Master without any Manual intervention. How can the slaves start getting the updates from the Repeater instead of the broken Master. Is there a recommended way to do this? Are there any other recommended Master/Slave setup's to ensure High availability of the Solr systems?
At this time, your best option is probably to investigate the SolrCloud functionality present in the current Solr 4.0 alpha, which at the time of this writing is due for its final release within a few months. The goal of SolrCloud is to handle data distribution and master election, using the ZooKeeper distributed database to maintain consensus within the cluster about which nodes are serving in while roles.
There are other more traditional ways to set up failover for Solr 3's replicated master-slave architecture, but I personally wouldn't want to make that investment with Solr 4.0 so near to release.
Edit: See Linux-HA, for one such traditional approach. Personally, I would create a purpose-built daemon that reconfigures your cores and load balancer, using ZooKeeper for presence detection and distributed locks.
If outsourcing is an option, you might consider a hosted service such as my own humble Websolr. We provide this kind of distribution and hot failover by default, so our customers don't have to worry as much about the mechanics of how it's implemented.
I agree with Nick. The way replication works in Solr 3.x is not always handy, especially for master fail-over. If you are going to consider Solr 4 you might want to have a look at elasticsearch too, which solves this kind of problems in a really brilliant way!
It uses push replication instead of the pull mechanism used by Solr. That means the document is literally reindexed on all nodes. It might sound strange but that allows to reduce the network load (due to segment merge for example). Furthermore, a node is elected as master and if it crashes one other node will automatically replace it becoming the new master.