net project as well as a setup project. I also have it so that during installation it asks the users to enter a file location to store their database. the plan is to have an empty .mdf file, with all the tables setup, copied into that folder and I store the folder path in a config file.
this is mainly because I am planning on having multiple separate applications that all need the ability to access the same database. I have it storing the folder path in my config file the only thing I'm having trouble with is
storing the template files I don't know if i should do this in the setup project or main project
how to copy said template files into a new folder
so far I have been unable to find a solution so any help is appreciated
Well here is what I do this in a few of my projects - something that has proven reliable enough for me over the years (which you may or may want to do as well):
I have the program itself create the database files in an initialization routine. First however, it creates the sub folders in which the database files will be stored, if they don't already exist.
To do this, the program just checks if the folder exists and if the database file exists and if they do not, it creates them on the spot:
If Directory.Exists(gSQLDatabasePathName) Then
Else
Directory.CreateDirectory(gSQLDatabasePathName)
End If
If File.Exists(gSQLiteFullDatabaseName) Then
Else
...
I also have the program do some other stuff in the initialization routine, like creating an encryption key to be used when storing / retrieving the data - but that may be more than you need (also, for full disclosure, this has some rare issues that I haven't been able to pin down).
Here too are some addition considerations:
I appreciate you have said that you want to give the user the choice of where to store their database files. However, I would suggest storing them in the standard locations
Where is the correct place to store my application specific data?
and only allowing the users to move them if the really need to (for example if the database needs to be shared over the network) as it will make the support of your app harder if every user has their data stored in different places.
I have found letting the user see in their options/settings windows where their database is stored is a good idea.
Also to encourage them to back those files /directories up.
Also to create automatic backups of several generations for the user.
Hope this helps.
My problem is the following:
I usually backup files (e.g. pictures) on external harddisc drives and the store them away in safe places. In the meantime also on NAS. But I don't want to have them connected and online all the time, for power and security reasons.
If I'm now looking for an old file (e.g. a special jpg from the holiday in April 2004) I would have to connect a few discs and search them for the needed file.
To overcome this problem I usually create a recursive dir-dump into a textfile for the whole disc after backup.
This way I can search the filename in the text-file.
But there still is a problem if I don't exactly know the file name that I am looking for. I know the Year and month and maybe the camera I was using then, but there must be hundreds of files in this month.
Therefore I would like to create a "dummy"-backup-filesystem with all the filesnames on the harddisc but without the actual data behind it. This way I could click through the folders and see the foldernames and filenames and easily find the respective file.
The question is: How do I create such a filesystem copy with the complete folderstructures but only the filenames and not the data?
I'm working on Linux, Opensuse, but I guess this is not a linux specific question.
In the meantime I found the solution I was looking for:
Virtual Volume View:
http://vvvapp.sourceforge.net/
Works with Linux, MacOS and Windows!
I am building a web application where the users can create reports and then upload some images for the created reports. Those images will be rendered in the browser when the user clicks a button on the report page. The images are confidential and only authorized users will be able to access them.
I am aware of the pros and cons of storing images in database, in filesystem or a service like amazon S3. For my application, I am inclined to keep the images in the filesystem and paths of the images in the database. That means I have to deal with the problems arising around distributed transaction management. I need some advice on how to deal with these problems.
1- I believe one of the proper solutions is to use technologies like JTA and XADisk. I am not very knowledgeable about these technologies but I believe 2 phase commit is how automicity is achieved. I am using MySQL as the database, and it seems like 2 phase commit is supported by MySQL. Problem with this approach is XADisk does not seem to be an active project and there is not much documentation about it and there is the fact that I am not very knowlegable about the ins and outs of this approach. I am not sure if I should invest in this approach.
2- I believe I can get away with some of the problems arising from the violation of ACID properties for my application. While uploading images, I can first write the files to disk, if this operation succeeds I can update the paths in the database. If database transaction fails, I can delete the files from the disk. I know that is still not bulletproof; an electricity shortage might occur just after the db transaction or the disk might not be responsive for a while etc...I know there are also concurrency issues, for instance if one user tries to modify the uploaded image and another tries to delete it at the same time, there will be some problems. Still the chances for concurrent updates in my application will be relatively low.
I believe I can live with orphan files on the disk or orphan image paths on the db if such exceptional cases occur. If a file path exists in db and not in the file system, I can show a notification to the user on report page and he might try to reupload the image. Orphan files in the file system would not be too much problem, I might run a process to detect such files time to time. Still, I am not very comfortable with this approach.
3- The last option might be to not store file paths in the db at all. I can structure the filesystem such that I can infer the file path in code and load all images at once. For instance, I can create a folder with the name of report id for each report. When a request has been made to load images of the report, I can load the images at once since I know the report id. That might end up with huge number of folders in the filesystem and I am not sure if such a design is acceptable. Concurrency issues will still exist in this scheme.
I would appreciate some advice on which approach I should follow.
I believe you are trying to be ultra-correct, and maybe not that much is needed, but I also faced some similar situation some time ago and explored also different possibilities. I disliked options aligned to your option 1, but about the 2 and 3, I had different successful approaches.
Let's sum up first the list of concerns:
You want the file to be saved
You want the file path to be linked to the corresponding entity (i.e the report)
You don't want a file path to be linked to a file that doesn't exist
You don't want files in the filesystem not linked to any report
And the different approaches:
1. Using DB
You can assure transactions in the DB pretty much with any relational database, and with S3 you can ensure read-after-write consistency for both new objects and upload of new objects. If you PUT an object and you get a 200 OK, it will be readable. Now, how to put all this together? You need to keep track of the process. I can figure 2 ways:
1.1 With a progress table
The upload request is saved to a table with anything need to identify this file, report id, temp uploaded file path, destination path, and a status column
You save the file
If the file safe fails you can update the record in the table, or delete it
If saving the file is successful, in a transaction:
update the progress table with successful status
update the table where you actually save the relationship report-image
Have a cron, but not checking the filesystem, but checking the process table. If there is any file in the filesystem that is orphan, definitely it had been added to the table (it was point 1). Here you can decide if you will delete the file, or if you have enough info, you can continue with the aborted process triggering the point 4.
The same report-image relationship table with some extra status columns.
1.2 With a queue system
Like RabbitMQ, SQS, AMQ, etc
A very similar approach could be done with any queue system instead of a db table. I wont give much details because it depends more on your real infrastructure, but just the general idea.
The upload request goes to a queue, you send a message with anything you may need to identify this file, report id, and if you want a tentative final path.
You upload the file
A worker reads pending messages in the queue and does the work. The message is marked as consumed only when everything goes well.
If something fails, naturally the message will come back to the queue
In the next time a message is read, the worker can have enough info to see if there is work to resume, or even a file to delete if resuming is not possible
In both cases, concurrency problems wont be straightforward to manage, but can be managed (relying on DB locks in fist case, and FIFO queues in second cases) but always with some application logic
2. Without DB
To some extent a system without a database would be perfectly acceptable, if we can defend it as a proper convention over configuration design.
You have to deal with 3 things:
Save files
Read files
Make sure that the structure of the filesystem is manageable
Lets start with 3:
Folder structure
In general, something like one folder for report id will be too simple, and maybe hard to maintain, and also ultimately too plain. This will cause issues, because if we have a folder images with one folder per report, and tomorrow you have less say 200k reports, the images folder will have 200k elements, and even an ls will take too much time, same for any programing language trying to access. That will kill you
You can think about something more sophisticated. Personally like a way that I learnt from Magento 1 more than 10 years ago and I used a lot since then: Using a folder structure following first outside rules, but extended with rules derived extended with the file name itself.
We want to save a product image. The image name is: myproduct.jpg
first rule is: for product images i use /media/catalog/product
then, to avoid many images in the same one, i create one folder per every letter of the image name, up to some number of letters. Lets say 3. So my final folder will be something like /media/catalog/product/m/y/p/myproduct.jpg
like this, it is clear where to save any new image. You can do something similar using your reports id, categories, or anything that makes sense for you. The final objective is to avoid too flat structure, and to create a tree that makes sense to you, and also that can be automatized easily.
And that takes us to the next part:
Read and write.
I implemented a similar system before quite successfully. It allowed me to save files easy, and to retrieve them easily, with locations that were purely dynamic. The parts here were:
S3 (but you can do with any filesystem)
A small microservice acting as a proxy for both read and write.
Some namespace system and attached logic.
The logic is quite simple. The namespace lets me know where the file will be saved. For example, the namespace can be companyname/reports/images.
Lets say a develop a microservice for read and write:
For saving a file, it receives:
namespace
entity id (ie you report)
file to upload
And it will do:
based on the rules I have for that namespace, and the id and file name will save the file in this folder
it doesn't return the physical location. That remains unknown to the client.
Then, for reading, clients will use a URL that uses also convention. For example you can have something like
https://myservice.com/{NAMESPACE}/{entity_id}
And based on the logic, the microservice will know where to find that in the storage and return the image.
If you have more than one image per report, you can do different things, such as:
- you may want to have a third slug in the path such as https://myservice.com/{NAMESPACE}/{entity_id}/1 https://myservice.com/{NAMESPACE}/{entity_id}/2 etc...
- if it is for your internal application usage, you can have one endpoint that returns the list of all eligible images, lets say https://myservice.com/{NAMESPACE}/{entity_id} returns an array with all image urls
How I implemented this was with quite simple yml config to define the logic, and very simple code reading that config. That allowed me to have a lot of flexibility. For example save reports in total different paths or servers or s3 buckets if they belong to different companies or are different report types
I'm developing a change tracking software to monitor files of a specific volume. I tried FileSystemWatcher (.NET) and AlternateDataStreams but they all have some limitations (ie. the change tracking software has to be on 24/7, alternate data streams to not work for ReadOnly files, etc.).
After some investigations I thought that I could directly read the NTFS change journal. This works great if the file is moved/renamed, etc. on the same volume. For identifying the file I'm using the File Reference Number.
But if the file is moved to another volume, the File Reference Number naturally changes.
My question:
Is there a unique ID (GUID or something else) that doesn't change even if the file is moved to another volume?
Well...there can be a file GUID, but it's not there by default.
If you have the necessary permissions, you can race through the files and assign a GUID which will be preserved across NTFS volume moves. Your stated goal is exactly why the feature exists. It uses a somewhat unwieldy API called DeviceIOControl...which is used for a gazillion purposes...but one of it's control codes is FSCTL_CREATE_OR_GET_OBJECT_ID. Check here for details.
It only creates the GUID if one hasn't already been assigned...which is just how you want it to work. Of course, if the file moves to a non-NTFS volume, you're still outta luck.
How can I make a folder that does things. Surely dropbox knows when a file is put in the folder, and that file is synced. How can I make a folder that does the same, and that the files I put in it go to my ftp?
I'm trying to do this on a Mac (surely, Dropbox works fine on a Mac).
I believe what you are looking for is a way to monitor when files are changed. Then, you can simply upload the changed file via FTP like you mentioned. If this is the case, the answer is to tie into the Windows Folder and File events. Here is a good article on how to do so:
http://www.codeproject.com/KB/files/MonitorFolderActivity.aspx
The code needed to FTP a file can be found here:
http://msdn.microsoft.com/en-us/library/ms229715.aspx
All of this is assuming you are going to be using C#. If you are going to use a different language, you will need to perform the same basic actions in the same basic manner but the syntax will be different.
To get started, this is all you need. You watch the folder for changes to any of the files. When you see a change, you upload the changed file via FTP (if that is your desired method of web transport) to the remote location. Of course, you would need to do the opposite for other clients. They would need to subscribe to events on your server that told them to download the latest versions of the changed files. Finally, you would need to apply your own business logic for things like how often you want the uploads to happen, if you want logging enabled for the changes, if you are going to do file versioning, etc.
One solution(windows only + .NET) would be to run a client with and monitor a folder with FileSystemWatcher and when the change event fires, do appropriate action required to sync with FTP.