Segmentation fault when using strlen on user input string - c

I'm trying to understand what's wrong with my code.
I have a string composed by words inserted by user input.
I've terminated the string so it should be ok.
Then I use another cycle to reverse the direction of the words. But when I call STRLEN on the last word of the string, it gives me segmentation fault.
(the reversal part is not done yet, since i'm stuck with this problem).
Why?
Here is the code:
char *frase, c;
int i=0;
int d=1;
frase = (char*)malloc(sizeof(char));
printf("Insert phrase: ");
while(c != '\n') {
c = getc(stdin);
frase = (char*)realloc(frase,d*sizeof(char)); //dynamic allocation
frase[i] = c;
d++;
i++;
}
//at the end i terminate the string
frase[i]='\0';
printf("\nInserted phrase: %s\n",frase);
// here I start the reversal, first of all I separate all the words
char *pch;
char s[2] = " ";
int messl=0;
pch = strtok (frase,s);
printf ("%s\n",pch);
messl += 1 + strlen(pch);
printf ("Lung stringa = %d\n",messl);
char *message = (char*) malloc(messl);
while (pch != NULL) {
pch = strtok (NULL, s);
printf("%s\n",pch);
messl += 1 + strlen(pch); //in the last cycle of the loop I get the error
}
//printf ("%s\n",message);
return 0;

In your code.
while(c != '\n')
at the very first iteration, c is uninitialised. It invokes undefined behaviour to use the value of an automatic local variable which has not been initialized explicitly.
getc() returns an int which , at times, may not fit into a char. Change the type of c to int.
That said, as you mentioned in your question, that you're getting segfault from strlen(), you need check for the non-NULL value of the passed pointer to strlen(). Add the NULL-check to pch immediately after tokenizing.

The main problem is:
while (pch != NULL) {
pch = strtok (NULL, s);
printf("%s\n",pch);
messl += 1 + strlen(pch);
When strtok returns NULL, you go on to call printf and strlen on it. You need to immediately test pch upon calling strtok. For example the loop structure could be:
while ( (pch = strtok(NULL, s)) != NULL ) {
There are various other problems too, as other answerers/commentors have noted.

Related

Segmentation fault on line with fgets() - C

I have this code in my program:
char* tok = NULL;
char move[100];
if (fgets(move, 100, stdin) != NULL)
{
/* then split into tokens using strtok */
tok = strtok(move, " ");
while (tok != NULL)
{
printf("Element: %s\n", tok);
tok = strtok(NULL, " ");
}
}
I have tried adding printf statements before and after fgets, and the one before gets printed, but the one after does not.
I cannot see why this fgets call is causing a segmentation failure.
If someone has any idea, I would much appreciate it.
Thanks
Corey
The strtok runtime function works like this
the first time you call strtok you provide a string that you want to tokenize
char s[] = "this is a string";
in the above string space seems to be a good delimiter between words so lets use that:
char* p = strtok(s, " ");
what happens now is that 's' is searched until the space character is found, the first token is returned ('this') and p points to that token (string)
in order to get next token and to continue with the same string NULL is passed as first argument since strtok maintains a static pointer to your previous passed string:
p = strtok(NULL," ");
p now points to 'is'
and so on until no more spaces can be found, then the last string is returned as the last token 'string'.
more conveniently you could write it like this instead to print out all tokens:
for (char *p = strtok(s," "); p != NULL; p = strtok(NULL, " "))
{
puts(p);
}
EDITED HERE:
If you want to store the returned values from strtok you need to copy the token to another buffer e.g. strdup(p); since the original string (pointed to by the static pointer inside strtok) is modified between iterations in order to return the token.

Getting the length of a String Token

C Programming:
I'm attempting to get the length of each word inside a string, but having massive troubles and get a segmentation fault no matter what method I use.
I was originally trying to use just "strlen(pstr)" but that caused segmentation fault.
This is my latest attempt which still causes segmentation fault:
void format_text(char* text)
{
char* pstr;
char copied[1000];
int loop;
int strCnt = 0;
int temp;
int strSize[100];
int strNo[100];
pstr = strtok(text, " ");
while (pstr != NULL)
{
pstr = strtok(NULL, " ");
strcpy(copied, pstr);
strSize[strCnt] = strlen(copied);
strCnt++;
}
printf("the number of strings is: %d\n", strCnt);
for (loop = 0; loop < strCnt; loop++)
{
printf("The length of string %d is %d\n", loop + 1, strSize[loop]);
}
}
How can I get and print the length of each word(token)?
You don't need the copied string to get the lenght, you can simply use pstr. And, you need to put the strtok() after the strlen(), otherwise you'll miss the length of the first word.
Here's what should work:
pstr = strtok(text, " ");
while (pstr != NULL)
{
strSize[strCnt++] = strlen(pstr);
pstr = strtok(NULL, " ");
}
The strtok() function returns pstr == NULL when there are no further tokens to return, however your code does not take notice of this and instead immediately calls strcpy(copied, pstr);, which will result in your crash. Check for NULL and terminate the loop immediately before otherwise using pstr.
For bonus learning points, walk through this in your debugger to follow exactly what happens.

Function executes but gives a segmentation error, C

I wrote a C function to take a char* as an input and split it using a space and store tokens again in a string array.
My code executes properly but before it finishes the execution, it gives an error saying segmentation error. Can anyone show me what is wrong.
void parseCommand(char *msg)
{
char buffer[25][30];
char *tok;
char *msgCopy;
//strcpy(msgCopy,msg);
msgCopy =msg;
tok = strtok(msgCopy," ");
strcpy(buffer[0],tok);
int i=1;
while(tok != NULL ){
tok = strtok (NULL, " ");
strcpy(buffer[i],tok); //me line eke error eka
printf("%d : %s\n",i,buffer[i]);
i++;
}
}
strtok finally returns NULL to signal that there are no more tokens and you call strcpy(buffer[i],tok); which attempts to read from NULL. This causes segfault.
You can solve it by moving strtok into loop condition:
while((tok = strtok (NULL, " ")) != NULL ){
strcpy...
or escaping loop using break statement:
while(1){
tok = strtok (NULL, " ");
if(tok == NULL) break;
strcpy...

Setting pointer value without it being changed afterwards

I'm reading a string with space as a delimiter by using the strtok function.
My code looks like this:
char * pch = strtok (text," ");
int i = 0;
while (pch != NULL)
{
if (i == 0)
strcpy(name, pch);
else
others[i - 1] = pch;
pch = strtok (NULL, " ");
}
The string looks like this: TCP 1 2 3 4, and name is of char* type that I receive in my function.
I wish to assign name to be TCP (i.e. first piece before the first delimiter), but because the pch pointer proceeds, the name variable changes when pch changes. How can I assign the pch pointer value to name without it being changed when the pointer changes?
You forgot i++. You never increment i.
You never increment i so every loop ends up copying the latest value of pch into name.
You could fix it by incrementing i for each iteration of the loop:
char * pch = strtok (text," ");
int i = 0;
while (pch != NULL)
{
if (i++ == 0) // ++ is the only change from your code
strcpy(name, pch);
else
others[i - 1] = pch;
pch = strtok (NULL, " ");
}
Your description doesn't match your code.
Your code clearly copies the data (the characters) with strcpy(), not just the pointer. The latter would look like:
if (i == 0)
name = pch;
but that would still work, since you've copied the pointer to the first token, and the copy won't change.
The others array, on the other hand, is risky if the contents of text changes after the loop, since there you're only storing pointers.
EDIT: D'oh, as others point our you're failing to increment i, which might explain the strangeness. Not sure why I missed this, I guess I was too confused about the disconnect between the description and the code.

How does strtok() split the string into tokens in C?

Please explain to me the working of strtok() function. The manual says it breaks the string into tokens. I am unable to understand from the manual what it actually does.
I added watches on str and *pch to check its working when the first while loop occurred, the contents of str were only "this". How did the output shown below printed on the screen?
/* strtok example */
#include <stdio.h>
#include <string.h>
int main ()
{
char str[] ="- This, a sample string.";
char * pch;
printf ("Splitting string \"%s\" into tokens:\n",str);
pch = strtok (str," ,.-");
while (pch != NULL)
{
printf ("%s\n",pch);
pch = strtok (NULL, " ,.-");
}
return 0;
}
Output:
Splitting string "- This, a sample string." into tokens:
This
a
sample
string
the strtok runtime function works like this
the first time you call strtok you provide a string that you want to tokenize
char s[] = "this is a string";
in the above string space seems to be a good delimiter between words so lets use that:
char* p = strtok(s, " ");
what happens now is that 's' is searched until the space character is found, the first token is returned ('this') and p points to that token (string)
in order to get next token and to continue with the same string NULL is passed as first
argument since strtok maintains a static pointer to your previous passed string:
p = strtok(NULL," ");
p now points to 'is'
and so on until no more spaces can be found, then the last string is returned as the last token 'string'.
more conveniently you could write it like this instead to print out all tokens:
for (char *p = strtok(s," "); p != NULL; p = strtok(NULL, " "))
{
puts(p);
}
EDIT:
If you want to store the returned values from strtok you need to copy the token to another buffer e.g. strdup(p); since the original string (pointed to by the static pointer inside strtok) is modified between iterations in order to return the token.
strtok() divides the string into tokens. i.e. starting from any one of the delimiter to next one would be your one token. In your case, the starting token will be from "-" and end with next space " ". Then next token will start from " " and end with ",". Here you get "This" as output. Similarly the rest of the string gets split into tokens from space to space and finally ending the last token on "."
strtok maintains a static, internal reference pointing to the next available token in the string; if you pass it a NULL pointer, it will work from that internal reference.
This is the reason strtok isn't re-entrant; as soon as you pass it a new pointer, that old internal reference gets clobbered.
strtok doesn't change the parameter itself (str). It stores that pointer (in a local static variable). It can then change what that parameter points to in subsequent calls without having the parameter passed back. (And it can advance that pointer it has kept however it needs to perform its operations.)
From the POSIX strtok page:
This function uses static storage to keep track of the current string position between calls.
There is a thread-safe variant (strtok_r) that doesn't do this type of magic.
strtok will tokenize a string i.e. convert it into a series of substrings.
It does that by searching for delimiters that separate these tokens (or substrings). And you specify the delimiters. In your case, you want ' ' or ',' or '.' or '-' to be the delimiter.
The programming model to extract these tokens is that you hand strtok your main string and the set of delimiters. Then you call it repeatedly, and each time strtok will return the next token it finds. Till it reaches the end of the main string, when it returns a null. Another rule is that you pass the string in only the first time, and NULL for the subsequent times. This is a way to tell strtok if you are starting a new session of tokenizing with a new string, or you are retrieving tokens from a previous tokenizing session. Note that strtok remembers its state for the tokenizing session. And for this reason it is not reentrant or thread safe (you should be using strtok_r instead). Another thing to know is that it actually modifies the original string. It writes '\0' for teh delimiters that it finds.
One way to invoke strtok, succintly, is as follows:
char str[] = "this, is the string - I want to parse";
char delim[] = " ,-";
char* token;
for (token = strtok(str, delim); token; token = strtok(NULL, delim))
{
printf("token=%s\n", token);
}
Result:
this
is
the
string
I
want
to
parse
The first time you call it, you provide the string to tokenize to strtok. And then, to get the following tokens, you just give NULL to that function, as long as it returns a non NULL pointer.
The strtok function records the string you first provided when you call it. (Which is really dangerous for multi-thread applications)
strtok modifies its input string. It places null characters ('\0') in it so that it will return bits of the original string as tokens. In fact strtok does not allocate memory. You may understand it better if you draw the string as a sequence of boxes.
To understand how strtok() works, one first need to know what a static variable is. This link explains it quite well....
The key to the operation of strtok() is preserving the location of the last seperator between seccessive calls (that's why strtok() continues to parse the very original string that is passed to it when it is invoked with a null pointer in successive calls)..
Have a look at my own strtok() implementation, called zStrtok(), which has a sligtly different functionality than the one provided by strtok()
char *zStrtok(char *str, const char *delim) {
static char *static_str=0; /* var to store last address */
int index=0, strlength=0; /* integers for indexes */
int found = 0; /* check if delim is found */
/* delimiter cannot be NULL
* if no more char left, return NULL as well
*/
if (delim==0 || (str == 0 && static_str == 0))
return 0;
if (str == 0)
str = static_str;
/* get length of string */
while(str[strlength])
strlength++;
/* find the first occurance of delim */
for (index=0;index<strlength;index++)
if (str[index]==delim[0]) {
found=1;
break;
}
/* if delim is not contained in str, return str */
if (!found) {
static_str = 0;
return str;
}
/* check for consecutive delimiters
*if first char is delim, return delim
*/
if (str[0]==delim[0]) {
static_str = (str + 1);
return (char *)delim;
}
/* terminate the string
* this assignmetn requires char[], so str has to
* be char[] rather than *char
*/
str[index] = '\0';
/* save the rest of the string */
if ((str + index + 1)!=0)
static_str = (str + index + 1);
else
static_str = 0;
return str;
}
And here is an example usage
Example Usage
char str[] = "A,B,,,C";
printf("1 %s\n",zStrtok(s,","));
printf("2 %s\n",zStrtok(NULL,","));
printf("3 %s\n",zStrtok(NULL,","));
printf("4 %s\n",zStrtok(NULL,","));
printf("5 %s\n",zStrtok(NULL,","));
printf("6 %s\n",zStrtok(NULL,","));
Example Output
1 A
2 B
3 ,
4 ,
5 C
6 (null)
The code is from a string processing library I maintain on Github, called zString. Have a look at the code, or even contribute :)
https://github.com/fnoyanisi/zString
This is how i implemented strtok, Not that great but after working 2 hr on it finally got it worked. It does support multiple delimiters.
#include "stdafx.h"
#include <iostream>
using namespace std;
char* mystrtok(char str[],char filter[])
{
if(filter == NULL) {
return str;
}
static char *ptr = str;
static int flag = 0;
if(flag == 1) {
return NULL;
}
char* ptrReturn = ptr;
for(int j = 0; ptr != '\0'; j++) {
for(int i=0 ; filter[i] != '\0' ; i++) {
if(ptr[j] == '\0') {
flag = 1;
return ptrReturn;
}
if( ptr[j] == filter[i]) {
ptr[j] = '\0';
ptr+=j+1;
return ptrReturn;
}
}
}
return NULL;
}
int _tmain(int argc, _TCHAR* argv[])
{
char str[200] = "This,is my,string.test";
char *ppt = mystrtok(str,", .");
while(ppt != NULL ) {
cout<< ppt << endl;
ppt = mystrtok(NULL,", .");
}
return 0;
}
For those who are still having hard time understanding this strtok() function, take a look at this pythontutor example, it is a great tool to visualize your C (or C++, Python ...) code.
In case the link got broken, paste in:
#include <stdio.h>
#include <string.h>
int main()
{
char s[] = "Hello, my name is? Matthew! Hey.";
char* p;
for (char *p = strtok(s," ,?!."); p != NULL; p = strtok(NULL, " ,?!.")) {
puts(p);
}
return 0;
}
Credits go to Anders K.
Here is my implementation which uses hash table for the delimiter, which means it O(n) instead of O(n^2) (here is a link to the code):
#include<stdio.h>
#include<stdlib.h>
#include<string.h>
#define DICT_LEN 256
int *create_delim_dict(char *delim)
{
int *d = (int*)malloc(sizeof(int)*DICT_LEN);
memset((void*)d, 0, sizeof(int)*DICT_LEN);
int i;
for(i=0; i< strlen(delim); i++) {
d[delim[i]] = 1;
}
return d;
}
char *my_strtok(char *str, char *delim)
{
static char *last, *to_free;
int *deli_dict = create_delim_dict(delim);
if(!deli_dict) {
/*this check if we allocate and fail the second time with entering this function */
if(to_free) {
free(to_free);
}
return NULL;
}
if(str) {
last = (char*)malloc(strlen(str)+1);
if(!last) {
free(deli_dict);
return NULL;
}
to_free = last;
strcpy(last, str);
}
while(deli_dict[*last] && *last != '\0') {
last++;
}
str = last;
if(*last == '\0') {
free(deli_dict);
free(to_free);
deli_dict = NULL;
to_free = NULL;
return NULL;
}
while (*last != '\0' && !deli_dict[*last]) {
last++;
}
*last = '\0';
last++;
free(deli_dict);
return str;
}
int main()
{
char * str = "- This, a sample string.";
char *del = " ,.-";
char *s = my_strtok(str, del);
while(s) {
printf("%s\n", s);
s = my_strtok(NULL, del);
}
return 0;
}
strtok() stores the pointer in static variable where did you last time left off , so on its 2nd call , when we pass the null , strtok() gets the pointer from the static variable .
If you provide the same string name , it again starts from beginning.
Moreover strtok() is destructive i.e. it make changes to the orignal string. so make sure you always have a copy of orignal one.
One more problem of using strtok() is that as it stores the address in static variables , in multithreaded programming calling strtok() more than once will cause an error. For this use strtok_r().
strtok replaces the characters in the second argument with a NULL and a NULL character is also the end of a string.
http://www.cplusplus.com/reference/clibrary/cstring/strtok/
you can scan the char array looking for the token if you found it just print new line else print the char.
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main()
{
char *s;
s = malloc(1024 * sizeof(char));
scanf("%[^\n]", s);
s = realloc(s, strlen(s) + 1);
int len = strlen(s);
char delim =' ';
for(int i = 0; i < len; i++) {
if(s[i] == delim) {
printf("\n");
}
else {
printf("%c", s[i]);
}
}
free(s);
return 0;
}
So, this is a code snippet to help better understand this topic.
Printing Tokens
Task: Given a sentence, s, print each word of the sentence in a new line.
char *s;
s = malloc(1024 * sizeof(char));
scanf("%[^\n]", s);
s = realloc(s, strlen(s) + 1);
//logic to print the tokens of the sentence.
for (char *p = strtok(s," "); p != NULL; p = strtok(NULL, " "))
{
printf("%s\n",p);
}
Input: How is that
Result:
How
is
that
Explanation: So here, "strtok()" function is used and it's iterated using for loop to print the tokens in separate lines.
The function will take parameters as 'string' and 'break-point' and break the string at those break-points and form tokens. Now, those tokens are stored in 'p' and are used further for printing.
strtok is replacing delimiter with'\0' NULL character in given string
CODE
#include<iostream>
#include<cstring>
int main()
{
char s[]="30/4/2021";
std::cout<<(void*)s<<"\n"; // 0x70fdf0
char *p1=(char*)0x70fdf0;
std::cout<<p1<<"\n";
char *p2=strtok(s,"/");
std::cout<<(void*)p2<<"\n";
std::cout<<p2<<"\n";
char *p3=(char*)0x70fdf0;
std::cout<<p3<<"\n";
for(int i=0;i<=9;i++)
{
std::cout<<*p1;
p1++;
}
}
OUTPUT
0x70fdf0 // 1. address of string s
30/4/2021 // 2. print string s through ptr p1
0x70fdf0 // 3. this address is return by strtok to ptr p2
30 // 4. print string which pointed by p2
30 // 5. again assign address of string s to ptr p3 try to print string
30 4/2021 // 6. print characters of string s one by one using loop
Before tokenizing the string
I assigned address of string s to some ptr(p1) and try to print string through that ptr and whole string is printed.
after tokenized
strtok return the address of string s to ptr(p2) but when I try to print string through ptr it only print "30" it did not print whole string. so it's sure that strtok is not just returning adress but it is placing '\0' character where delimiter is present.
cross check
1.
again I assign the address of string s to some ptr (p3) and try to print string it prints "30" as while tokenizing the string is updated with '\0' at delimiter.
2.
see printing string s character by character via loop the 1st delimiter is replaced by '\0' so it is printing blank space rather than ''

Resources