I have a remote windows server and SQL Server 2008 installed. How can I check the access log of SQL Server with the IP address that tried to access the DB?
I tried in SQL Server Management Studio -> Management->SQL Server Log. It doesn't show the IP address.
As far as I know, if you missed to set up login auditing, you can't.
By default, only failed logins are logged. You have to set your server instance to log both failed and successful logins.
You can find some details here
Related
I am currently working on an application server, and a SQL Server, in which my database resides.
I seem to have a very weird problem, I seem to be able to ping the SQL Server from my application server, but I cannot connect using SQL Server Management Studio using Windows authentication. If I try to change the password in configuration manager, I get an error saying that it is not possible.
I cannot connect to database, neither remote or locally..
SMSS - says that the login failed for the user.
I installed SQL Server 2008 (not express) on my PC, but when tried to connect with SSMS, got this message:
A network-related or instance specific error occured while established
a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL
Server is configured to allow remote connections.(provider: Named
Pipes Provider, error: 40- Could not open a connection to SQL Server)
(Misrosoft SQL Server, Error 2)
My connection dialog box to SSMS is:
Server type: Database Engine.
Server name: (local)
Authentication: Windows
What should I check? Where to start troubleshooting?
GO TO >> Run Command (Ctrl + r )
Type -- services.msc
go to SQL SERVER >> Right Click >> Click Start
Again Restart SQL SERVER Studio
Here are some troubleshooting tips that you can do:
Try to run your SSMS as admin
Make sure that you are using the correct server name and instance
Check if your sql server service is running by going to run -> services.msc -> Check SQL Server(Instance Name) service if it is running
Error 40 has many reasons, some of them are related to network configurations which are out of scope in your question. Other reasons which may cause this error and has possibility in your question are as follow:
Make sure that SQL SERVER(XXX) service is running by visiting sql server configuration manager section
Make sure that SQL Browser service is running by visiting sql server configuration manager section
Make sure you are using the correct instance name
Read more about this error
If your server is Local. Try to login with server name . or (local).
If you are still not able to login, check Check SQL Server Configuration Manager (Start>All Programs>MS SQL Server>Configuration Tools>Configuration Manager)
I just installed SQL Server 2008 Express on my Vista SP1 machine. I previously had 2005 on here and used it just fine with the old SQL Server Management Studio Express. I was able to connect with no problems to my PC-NAME\SQLEXPRESS instance (no, PC-NAME is not my computer name ;-).
I uninstalled 2005 and SQL Server Management Studio Express. I then installed SQL Server 2008 Express on my machine and elected to have it install SQL Server Management Studio Basic.
Now, when I try to connect to PC-NAME\SQLEXPRESS (with Windows Authentication, like I always did), I get the following message:
Cannot connect to PC-NAME\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
When I installed SQL Server 2008, I had it use SQLEXPRESS as the local instance name. As far as I can tell, through SQL Server Configuration Manager, SQL Server is configured to allow remote connections.
When I went to the help link it mentions, the help page suggests the following:
Make sure that the SQL Server Browser service is started on the server.
Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections.
Well, as far as I can tell, there is no SQL Server Browser service on my system (looked in MMC for one, couldn't find one).
And the SQL Server Surface Area Configuration tool doesn't exist in SQL Server 2008. So good job there with your help documentation, Microsoft ;-).
I'm at a loss for what to do right now. I had a lot of work I was hoping to get done today after upgrading to 2008 (the person I'm working with got it up and running with no problem and told me it would be easy - he's also far better with database stuff that I am). Does anyone have any idea what might be wrong? I'd really appreciate it. If I can't get this working in a few hours, I'm going back to SQL Server 2005 (if that will even work, gah...).
Edit: I have tried turning Windows Firewall off, and that did not help. Also, I noticed that I do not have a "Data" directory under my SQL Server 2008 install directory tree - could I have possibly set something up wrong when I installed it?
Please check the ServerName which you provided. It should match with the below shown Name in the UserName textbox, and that name should followed with \SQLEXPRESS:
Start your Local SQL Server Service
Start SQL Config Manager: Click Start -> Microsoft SQL Server 2008 R2 -> SQL Server
Configuration Manager
Start SQL Services: Set the SQL Server (SQLEXPRESS) and SQL Server Browser services to automatic
start mode. Right-click each service -> Properties -> Go into the Service Tab
This will ensure they start up again if you restart your computer. Please check to ensure the state is "Running" for both services.
Login and authenticate with your Local SQL Server
Now open up SQL Server Management Studio and click "Connect to Object
Explorer" and select Server Name:
[Your PC name]\SQLEXPRESS
Example: 8540P-KL\SQLEXPRESS or (localhost)\SQLEXPRESS
To find your PC name: Right click My Computer -> Properties ->
Computer Name tab
Alternative: Login using windows authentication: Using the user name [Your
Domain]/[Your User Name]
Setup User Account
Create a new Login acct: In SQL Mgmt Studio -> Expand your local Server -> Security -> Right
click on Logins -> New Login
Set Password settings on New User Account: Uncheck Enforce password policy, password expiration and user must
change pw(Since this is local) Default database -> Your Database
Grant roles to New User Account: User Mapping Page -> Map to your db and grant db_owner role Status
Page -> Grant Permission to connect and Enable Login
Setup Access Permissions/Settings for User
Enable all auth modes: Right click your Local Server -> Properties -> Security Tab -> Enable
SQL Server and Windows Authentication Mode
Enable TCP/IP: Open SQL Server Configuration Manager -> SQL Server Network
Configuration -> Protocols for SQLEXPRESS -> Enable TCP/IP
Restart SQL Server Service: You will have to restart the SQL Server(SQLEXPRESS) after enabling TCP/IP
Database Properties File for Spring Project
database.url=jdbc:jtds:sqlserver://[local PC Computer
name];instance=SQLEXPRESS;DatabaseName=[db name];
database.username=[Your user name] database.password=[Your password]
database.driverClassName=net.sourceforge.jtds.jdbc.Driver
If you want to view larger screen shots and better formatting of the answer with more details please view the blog article below:
Setting up a Local Instance of SQL Server 2008 Blog Post:
I used (LocalDB)\MSSQLLocalDB as the server name, I was then able to see all the local databases.
Haha, oh boy, I figured it out. Somehow, someway, I did not install the Database Engine when I installed SQL Server 2008. I have no idea how I missed that, but that's what happened.
I know this question is old, but in case it helps anyone make sure the SQL Server Browser is running in the Services MSC. I installed SQL Server Express 2008 R2 and the SQL Server Browser Service was set to Disabled.
Start->Run->Services.msc
Find "SQL Server Browser"->Right Click->Properties
Set Startup Type to Automatic->Click Apply
Retry your connection.
I've just solved a problem related to this which may help other people.
Initially when loading up MSSMSE it had the server as PC_NAME\SQLEXPRESS and when I tried to connect it gave me Error: 26 - Error Locating Server/Instance Specified, so I went into SQL Server Configuration Manager to check if my SQL Server Browser and SQL Server services were running and set to automatic, only to find that instead of saying SQL Server (SQLEXPRESS) it says SQL Server(MSSQLSERVER).
I then tried connecting to PC-NAME\MSSQLSERVER and this time got SQL Network Interfaces, error: 25 - Connection string is not valid) (MicrosoftSQL Server, Error: 87) The parameter is incorrect so I googled this error and found that somebody had suggested that instead of using PC-NAME\MSSQLSERVER just use PC-NAME as the Server Name at the server connection interface, and this seems to work.
There's a link here http://learningsqlserver.wordpress.com/2011/01/21/what-version-of-sql-server-do-i-have/ which explains that MSSQLSERVER is the default instance and can be connected to by using just your hostname.
I think this may have arisen because I've had SQL Server 2008 installed at some point in the past.
Under Configuration Manager and Network Configuration and Protocols for your instance is TCP/IP Enabled? That could be the problem.
var.connectionstring = "server=localhost; database=dbname; integrated security=yes"
or
var.connectionstring = "server=localhost; database=dbname; login=yourlogin; pwd=yourpass"
For me, I was only able to get it to work by using "." in the server name field; was banging away for awhile trying different combos of the user name and server name. Note that during install of the server (ie this file: SQLEXPR_x64_ENU.exe) i checked default instance which defaults the name to MSSQLSERVER; the above high voted answers might be best used for separate named (ie when you need more than 1) server instances.
both of these videos helped me out:
use dot for server name: https://www.youtube.com/watch?v=DLrxFXXeLFk
general setup: https://www.youtube.com/watch?v=vng0P8Gfx2g
One of the first things that you should check is that the SQL Server (MSSQLSERVER) is started. You can go to the Services Console (services.msc) and look for SQL Server (MSSQLSERVER) to see that it is started. If not, then start the service.
You could also do this through an elevated command prompt by typing net start mssqlserver.
For me it was a windows firewall issue. Allow incoming connections. Opening port didn't work but allow programs did.
Link
Link2
I installed SQL Server Management Studio on my machine and once it was succesfully installed, I tried to connect to the local Database Engine but I was not succesful connecting to it it showing up an error showing as Cannot connect to the Local or having Network Related problems in the connection. I got a question here once I download the SQL Server management studio Do I need to do something else to get connected to the Local SQL Server.
Thanks,
Pranay.
No you don't need by default you can connect to local machine. You might have a problem connecting from other machine in the network if TCP is not enabled, but local should work.
Make sure you typed your 'sa' password correctly or use Windows Authentication.
Did you check in Windows Services? There is the service SQL Server (SQLEXPRESS) and SQL Server Browser which must be running.
Go to your Sql Server Configuration Manager and make sure that SQL Server is running. Otherwise right click and click Start.
And sometimes you need to Enable TCP/IP in your Protocols again in your Sql Server Configuration Manager
I have VS 2008 Professional Edition. After the installation (which included SQL Server 2008), I decided to install SQL Server 2008 Express Edition with Advanced Tools (so I could get SQL Server Management Studio on it). So I uninstalled the SQL Express that came with VS 2008, and installed the standalone SQL Server Express 2008 version with advanced tools.
However, When I try to logon onto SQL Server Management Studio using:
.\SQLEXPRESS
as Server name and Windows Authentication as the authentication, I get the following message:
TITLE: Connect to Server
------------------------------
Cannot connect to .\SQLEXPRESS.
------------------------------ ADDITIONAL INFORMATION:
A network-related or instance-specific
error occurred while establishing a
connection to SQL Server. The server
was not found or was not accessible.
Verify that the instance name is
correct and that SQL Server is
configured to allow remote
connections. (provider: SQL Network
Interfaces, error: 26 - Error Locating
Server/Instance Specified) (Microsoft
SQL Server, Error: -1)
For help, click:
http//go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------ BUTTONS:
OK
------------------------------
Any suggestions on how to get it to work? I have tried disabling Windows Firewall as well and still no luck.
I am using WIndows Vista and SQL Server 2008 Express SP1 Patch has also been applied recently.
FIX: For those interested:
I did not have any of the Instance Based installation installed (i.e. the Database engine). I Installed the instance based stuff and it fixed it!
Start your Local SQL Server Service
Start SQL Config Manager: Click Start -> Microsoft SQL Server 2008 R2 -> SQL Server
Configuration Manager
Start SQL Services: Set the SQL Server (SQLEXPRESS) and SQL Server Browser services to automatic
start mode. Right-click each service -> Properties -> Go into the Service Tab
This will ensure they start up again if you restart your computer. Please check to ensure the state is "Running" for both services.
Login and authenticate with your Local SQL Server
Now open up SQL Server Management Studio and click "Connect to Object
Explorer" and select Server Name:
[Your PC name]\SQLEXPRESS
Example: 8540P-KL\SQLEXPRESS or (localhost)\SQLEXPRESS
To find your PC name: Right click My Computer -> Properties ->
Computer Name tab
Alternative: Login using windows authentication: Using the user name [Your
Domain]/[Your User Name]
Setup User Account
Create a new Login acct: In SQL Mgmt Studio -> Expand your local Server -> Security -> Right
click on Logins -> New Login
Set Password settings on New User Account: Uncheck Enforce password policy, password expiration and user must
change pw(Since this is local) Default database -> Your Database
Grant roles to New User Account: User Mapping Page -> Map to your db and grant db_owner role Status
Page -> Grant Permission to connect and Enable Login
Setup Access Permissions/Settings for User
Enable all auth modes: Right click your Local Server -> Properties -> Security Tab -> Enable
SQL Server and Windows Authentication Mode
Enable TCP/IP: Open SQL Server Configuration Manager -> SQL Server Network
Configuration -> Protocols for SQLEXPRESS -> Enable TCP/IP
Restart SQL Server Service: You will have to restart the SQL Server(SQLEXPRESS) after enabling TCP/IP
Database Properties File for Spring Project
database.url=jdbc:jtds:sqlserver://[local PC Computer
name];instance=SQLEXPRESS;DatabaseName=[db name];
database.username=[Your user name] database.password=[Your password]
database.driverClassName=net.sourceforge.jtds.jdbc.Driver
If you want to view larger screen shots and better formatting of the answer with more details please view the blog article below:
Setting up a Local Instance of SQL Server 2008 Blog Post:
you can look for your instance name in SQL Server Configuration Manager. It is written between brackets after SQL Server service in the services list.
the . notation is correct and it's the same as (local)
Did you try using (local)\SQLEXPRESS in the name? I've not seen that . notation before.
Scott,
I had to enable SQL Server Browser in services once I did that I was able to connect on My recent install.
after that I only had to use the computer name as the server.
edit,
while researching further on finding sql server browser, noted that reporting services, service showed its instance as .\computer name.
try that as the server name.
edit again change to backslash been playing with linux recently :)
There is a possibility that you installed as Default instance. In this case, try connecting using (local) - just (local).
Then go to Programs/Microsoft SQL Server/Configuration Tools/SQL Server Configuration Manager. Go to SQL Server Network Configuration/Protocols for MSSQLSERVER and enable Named Pipes.
Have you tried looking at the SQL Server Surface Area Configuration? You might only have SQL Authentication setup and might need to enable Network and SQL Authentication.
-JFV
I have an application that uses a connection string trough VSOT in Word 2007.
The application gave a connection error.
I allways install Sql server 2008 Express R2 in mixed mode so that i can use the build in sa with i password to connect.
I re-entered the password to be sure its correct. In a next step i opened:
‘Configuration manager’ in ‘Program files’ ‘Microsoft Sql Server 2008’ –->’ Configuration Tools’ and set all the other instances on the properties --> hide instance 'yes'
That solved the problem in my case.
Danny
If you still have problems connecting to SQL Express 2008,
read this article
http://www.linglom.com/2009/03/28/enable-remote-connection-on-sql-server-2008-express/
It tells you about configuring SQL express after installation