I'm trying to run zeppelin on Ubuntu14 w/ Hadoop 1.0.3 and Spark 1.4.0.
I've finished building the source code, and all of the package successfully finished building. But when I run the daemon, it fails and says that the Zeppelin process had died.
Any ideas where this is going wrong?
It says that it can't find the logs folder and the run folder, which are definitely there.
Joseph,
I suggest that you try to test your zeppelin package first.
mvn verify
or check if your zeppelin process is alive or not.
ps -aux | grep zeppelin
Try running zeppelin by sudo :
sudo bin/zeppelin-daemon.sh start
This works for me:
ps -ef | grep "zeppelin"
kill -9 pid
sudo bin/zeppelin-daemon.sh restart
It could be an error caused by JDK version, at least that was the case for me
try to update jdk and build it again.
Also, make sure you are building it using the correct command
mvn clean package -Pspark-1.4 -Dhadoop.version=2.2.0 -Phadoop-2.2 -DskipTests
If you are running zeppelin from a virtual machine make sure that you have enough RAM and CPU. I ran into your problem when I was using Virtual Box and the default settings. When I increased the cpu's to 2 and RAM to 4096 everything worked fine. This is because zeppelin runs spark by default and spark is very resource intensive locally and otherwise.
I had the same issue and tried the proposed answers but none worked for me. Here is what did work for me:
Download the binaries, then download the build requirements:
sudo apt install openjdk-8-jdk npm libfontconfig r-base-dev r-cran-evaluate
sudo apt install maven
Go to the Zeppelin directory and run:
sudo bin/zeppelin-daemon.sh start
Go to localhost:8080 in your browser.
I had the same issue right now.. so I checked environment compatibility with my cdh then I got java compatibility issue
I setup yum install java-1.8.0-openjdk then start all the services of Hadoop with spark
Then, I started zeppelin, I made the zeppelin folder on root so I used..
sudo zeppelin/bin/zeppelin-daemon.sh start
Or
zeppelin/bin/zeppelin-daemon.sh start
I took Kangrok Lee's suggestion and ran mvn verify on my system. It prompted me that I do not have JAVA_HOME set and JAVA_HOME must point to JDK and not JRE.
Following steps fixed for me:
Make sure you have JDK installed on the system where you are trying to run zeppelin
Make sure JAVA_HOME environment variable points to your JDK and not JRE
After above steps are ensured zeppelin-daemon.sh start / restart should work for you. No need to use sudo.
Related
Below is the Error message I get every time I install anything in the terminal . Its kinda stuck there for a while.
I tried no. of solutions from StackOverflow but nothing worked.
Before installing this package,
please download the Oracle JDK 11 .tar.gz file
with the same version as this package (version 11.0.4),
and place it in /var/cache/oracle-jdk11-installer-local,
E.g.:
sudo mkdir -p /var/cache/oracle-jdk11-installer-local
sudo cp jdk-11.0.4_linux-x64_bin.tar.gz /var/cache/oracle-jdk11-installer-local/
sha256sum mismatch jdk-11.0.4_linux-x64_bin.tar.gz
Oracle JDK 11 is NOT installed.
dpkg: error processing package oracle-java11-installer-local (--configure):
installed oracle-java11-installer-local package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
oracle-java11-installer-local
E: Sub-process /usr/bin/dpkg returned an error code (1)
Doesn't show up again.
Remove the package oracle-java11-installer-local. You can do this in following way:
sudo apt remove oracle-java11-installer-local
found this solution:
sudo rm /var/lib/dpkg/info/oracle-java11-installer-local.postinst
at this site.
You need to download the folder of the Oracle JDK 11 on here https://www.oracle.com/java/technologies/javase-jdk11-downloads.html
After download the tar.gz file. Move to your folder location then copy the file by using this command
sudo cp jdk-11.0.6_linux-x64_bin.tar.gz /var/cache/oracle-jdk11-installer-local/
don't forget to check your file name! After that repeat again by typing
sudo apt-get install oracle-java11-installer-local
and you can check your java version after that by typing
java -version
Hello,
I've had the same issue.
When you try to run sudo apt update && sudo apt upgrade it will automatically try to update the Java if a newer version is available. In my case let's say from 11.0.4 -> 11.0.5.
If you add the JDK from Oracle (after download) to /var/cache/oracle-jdk11-installer-local/ it should work.
You don't have to uninstall it...(I mean the oracle-jdk11-installer-local, it works just fine).
Please let me know if you still have this issue.
I had the same issue. My solution was to download jdk-11.0.5_linux-x64_bin.tar.gz and copied it to /var/cache/oracle-jdk11-installer-local.
In console shell, type:
sudo apt update && sudo apt upgrade
After a long search: this solved it for me.
The checksum made the issues for me. Try:
sudo rm /var/lib/dpkg/info/oracle-java11-installer-local.postinst -f
Navigating to the directory var/cache and doing "sudo rmdir oracle-jdk11-installer-local/" worked for me.
sudo rmdir oracle-jdk11-installer-local/
I have managed to resolve the issue by doing this:
modify /var/lib/dpkg/info/oracle-java11-installer-local.postinst
Change the checkSum. take from oracle website check sum for 11.0.15.1
3. change the version in 2 places
4. save and update apt
5. then sudo apt install oracle-java11-installer-local
this worked for me
i was installing postgresql on ubuntu using linuxbrew:
brew install postgresql
it seems to work fine but after that because i was installing PostgreSQL for the first time i tried creating a database:
initdb /usr/local/var/postgres -E utf8
but it returned as:
initdb: command not found
i tried running the command with sudo but that doesn't helped
run locate initdb it should give you the list to chose. smth like:
MacBook-Air:~ vao$ locate initdb
/usr/local/Cellar/postgresql/9.5.3/bin/initdb
/usr/local/Cellar/postgresql/9.5.3/share/doc/postgresql/html/app-initdb.html
/usr/local/Cellar/postgresql/9.5.3/share/man/man1/initdb.1
/usr/local/Cellar/postgresql/9.6.1/bin/initdb
/usr/local/Cellar/postgresql/9.6.1/share/doc/postgresql/html/app-initdb.html
/usr/local/Cellar/postgresql/9.6.1/share/man/man1/initdb.1
/usr/local/bin/initdb
/usr/local/share/man/man1/initdb.1
So in my case I want to run
/usr/local/Cellar/postgresql/9.6.1/bin/initdb
If you don't have mlocate installed, either install it or use
sudo find / -name initdb
There's a good answer to a similar question on SuperUser.
In short:
Postgres groups databases into "clusters", each of which is a named collection of databases sharing a configuration and data location, and running on a single server instance with its own TCP port.
If you only want a single instance of Postgres, the installation includes a cluster named "main", so you don't need to run initdb to create one.
If you do need multiple clusters, then the Postgres packages for Debian and Ubuntu provide a different command pg_createcluster to be used instead of initdb, with the latter not included in PATH so as to discourage end users from using it directly.
And if you're just trying to create a database, not a database cluster, use the createdb command instead.
I had the same problem and found the answer here.
Ubuntu path is
/usr/lib/postgresql/9.6/bin/initdb
Edit: Sorry, Ahmed asked about linuxbrew, I'm talking about Ubuntu.
I Hope this answer helps somebody.
I had a similar issue caused by the brew install postgresql not properly linking postgres. The solve for me was to run:
brew link --overwrite postgresql
you can add the PATH to run from any location
sudo nano ~/.profile
inside nano go to the end and add the following
# set PATH so it includes user's private bin if it exists
if [ -d "/usr/lib/postgresql/14/bin/" ] ; then
PATH="/usr/lib/postgresql/14/bin/:$PATH"
fi
and configure the alternative
sudo update-alternatives --install /usr/bin/initdb initdb /usr/lib/postgresql/14/bin/initdb 1
Using the CakePHP docs, I am trying to install 3.0-beta2 using composer but I got this error:
cakephp/cakephp 3.0.x-dev requires ext-intl * -> the requested PHP extension intl is missing from your system
However, I know for sure that intl is installed (it shows on phpinfo). I'm using PHP 5.4.33/Apache 2.4.10.1
I faced the same problem today. You need to enable the intl PHP extension in your PHP configuration (.ini).
Solution Xampp (Windows)
Open /xampp/php/php.ini
Change ;extension=php_intl.dll to extension=php_intl.dll (remove the semicolon)
Copy all the /xampp/php/ic*.dll files to /xampp/apache/bin
Restart apache in the Xampp control panel
Solution Linux (thanks to Annamalai Somasundaram)
Install the php5-intl extension sudo apt-get install php5-intl
1.1. Alternatively use sudo yum install php5-intl if you are on CentOS or Fedora.
Restart apache sudo service apache2 restart
Solution Mac/OSX (homebrew) (thanks to deizel)
Install the php5-intl extension brew install php56-intl
If you get No available formula for php56-intl follow these instructions.
Restart apache sudo apachectl restart
Eventually you can run composer install to check if it's working. It will give an error if it's not.
I faced the same issue in ubuntu 12.04
Installed: sudo apt-get install php5-intl
Restarted the Apache: sudo service apache2 restart
OS X Homebrew (May 2015):
The intl extension has been removed from the main php5x formulas, so you no longer compile with the --enable-intl flag.
If you can't find the new package:
$ brew install php56-intl
Error: No available formula for php56-intl
Follow these instructions: https://github.com/Homebrew/homebrew-php/issues/1701
$ brew install php56-intl
==> Installing php56-intl from homebrew/homebrew-php
When using MAMP
1 Go to terminal
vim ~/.bash_profile
i
export PATH=/Applications/MAMP/bin/php/php5.6.2/bin:$PATH
Change php5.6.2 to the php version you use with MAMP
Hit ESC,
Type :wq,
hit Enter
source ~/.bash_profile
which php
2 Install Mac Ports
https://www.macports.org/install.php
sudo port install php5-intl OR sudo port install php53-intl
cp /opt/local/lib/php/extensions/no-debug-non-zts-20090626/intl.so /Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626/
{take a good look at the folder names that u use the right ones}
3 Add extension
Now, add the extension to your php.ini file:
extension=intl.so
Usefull Link:
https://gist.github.com/irazasyed/5987693
The error message clearly states what the problem is. You need the intl extension installed.
Step 1: install PHP intl you comfortable version
$sudo apt-get install php-intl
step 2:
For XAMPP Server intl extension is already installed, you need to enable this extension to uncomment below the line in your php.ini file. Php.ini file is located at c:\xampp\php\php.ini or where you have installed XAMPP.
Before uncomment:
;extension=php_intl.dll ;extension=php_mbstring.dll
After uncommenting:
extension=php_intl.dll extension=php_mbstring.dll
Short answer: activate intl extension in php_cli.ini. Thanks to #ndm for his input.
If you are using latest version Ubuntu 16.04 or later just do
sudo apt-get install php-intl
Then restart your apache
sudo service apache2 restart
In my case I was not actually trying to run cakephp locally, I was just trying to get it to auto update locally using composer (because I am playing with writing plugins that you install with composer). Since I don't actually even run it locally I could simply ignore requirements by adding the --ignore-platform-reqs flag.
php composer.phar update --ignore-platform-reqs
In my case, my running php version is 7.1.x on mac OSX .
I installed intl command using brew install php71-intl.
Placing extension=intl.so inside php.ini was no effect at all. Finally i looked for extension installed directory and there i saw intl.so and placed that path (extension=/usr/local/Cellar/php71-intl/7.1.11_20/intl.so) to my php.ini file and it solved my problem.
In my case (xampp PHP 8.0)
Find ;extension=intl in /xampp/php/php.ini
Remove ; and Restart Apache
MAKE this
In XAMPP, intl extension is included but you have to uncomment extension=php_intl.dll in php.ini and restart the server through the XAMPP Control Panel.
In WAMP, the intl extension is “activated” by default but not working. To make it work you have to go to php folder (by default) C:\wamp\bin\php\php{version}, copy all the files that looks like icu*.dll and paste them into the apache bin directory C:\wamp\bin\apache\apache{version}\bin. Then restart all services and it should be OK.
if you use XAMPP do this
1. turn off XAMPP
2. Modifed the php.ini is located in c/:xampp/php/php.ini
3. intl extension is included but you have to uncomment extension=php_intl.dll in php.ini and restart the server through the XAMPP Control Panel.
For Ubuntu terminal:
Please follow the steps:
Step-1:
cd ~
Step -2: Run the following commands
sudo apt-get install php5-intl
Step -3: You then need to restart Apache
sudo service apache2 restart
For Windows(XAMPP) :
Find the Php.ini file:
/xampp/php/php.ini
Update the php.ini file with remove (;) semi colon like mentioned below:
;extension=php_intl.dll to extension=php_intl.dll
and save the php.ini file.
After that you need to
Restart the xampp using xampp control.
Intl Means :Internationalization extension which enables programmers to perform UCA-conformant collation and number,currency,date,time formatting in PHP scripts.
To enable PHP Intl with PECL can be used.
pecl install intl
On a plain RHEL/CentOS/Fedora, PHP Intl can be install using yum
yum install php-intl
On Ubuntu, PHP Intl can be install using apt-get
apt-get install php5-intl
Restart Apache service for the changes to take effect.
That's it
For those who get Package not found error try sudo apt-get install php7-intl then run composer install in your project directory.
I had the same problem in windows
The error was that I had installed several versions of PHP and the Environment Variables were routing to wrong Path of php see image example
I'm using Mac OS High Sierra and none of these worked for me. But after searching a lot I found one that worked!
This may seem trivial, but in fact about 2 months ago some clever guys made changes in brew repository, so doing just: brew install php71-intl will show you error with message that such recipe doesn’t exists.
Fortunately, there is. There is temporary fix in another brew repo, so all you have to do is:
brew tap kyslik/homebrew-php
brew install kyslik/php/php71-intl
SOURCE: http://blastar.biz/2018/04/14/how-to-enable-php-intl-extension-for-php-7-1-using-xampp-on-macos-high-sierra/
I use Linux Ubuntu 20, you can try this:
Check php installed modules:
php -m | grep intl
If there are no result(s) from this command, you should just go ahead and install the module:
sudo apt-get install php7.4-intl
you will need to change *php7.4 to your desired php version.
you should restart apache when you're done:
sudo service apache2 restart
I'm just downloaded the files from this link, extracted and tried execute but I had this error:
Fatal error: Class 'Locale' not found in D:\xampp\htdocs\cake-3-beta-2\vendor\cakephp\cakephp\src\I18n\I18n.php on line 229
I'm running on localhost with xampp... I had the same issue with beta 1 and 2.
I faced the same problem today. You need to enable the intl PHP extension in your PHP configuration (.ini).
Solution Xampp (Windows)
Open /xampp/php/php.ini
Change ;extension=php_intl.dll to extension=php_intl.dll (remove the semicolon)
Copy all the /xamp/php/ic*.dll files to /xampp/apache/bin
Restart apache in the Xampp control panel
Solution Linux (thanks to Annamalai Somasundaram)
Install the php5-intl extension sudo apt-get install php5-intl
1.1. Alternatively use sudo yum install php5-intl if you are on CentOS or Fedora.
Restart apache sudo service apache2 restart
Solution Mac/OSX (homebrew) (thanks to deizel)
Install the php5-intl extension brew install php56-intl
If you get No available formula for php56-intl follow these instructions.
Restart apache sudo apachectl restart
Eventually you can run composer install to check if it's working.
Change in php ini file
For Older php version
;extension=php_intl.dll to extension=php_intl.dll
For New php versions
;extension=intl to extension=intl
Install python-netinterfaces on machine1 using apt-get
Copy the python-interfaces deb package cached in /var/cache/apt/archive from machine to machine2
Change the /etc/apt/sources.list to point to the directory where the package is copied in machine2
Run teh following command
sudo apt-get install python-interfaces
It inturn tries to install python-chardet-whl
and I get the error
warning: the following packages cannot be authenticated!
If I install the python-chardlet-whl from command line it fails with the authentication error message. however, it passes with --force-yes message.
I searched in the web for solutions and tried some suggestions like apt-key update, but nothing worked.
Is it possible to install package installed from one machine in another?
note: Both have same hardware and OS/other-software is installed is same
Are you sure destination machine has same repository list as source machine?
apt-cache showpkg python-chardet-whl
After adding repository to destination machine it would show you repository that package belongs to
Then you need to run:
sudo apt-get update
To update the repository list, by doing this you problem should fix
Also make sure that package does not need any dependency that is not installed on the system.