I used inotify() function in my program to monitor /proc directory. Now my job is to find when a process become zombie. Then i need output a warning that zombie process was found. At the moment program is recording some of the changes but i don't know how to find zombie process..
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/inotify.h>
#include <limits.h>
int main()
{
int inotify_fd, wd;
int num;
char buffer[sizeof(struct inotify_event)+NAME_MAX+1];
struct inotify_event *dogodek;
inotify_fd = inotify_init();
if (inotify_fd==-1) {
perror("inotify_init");
return 1;
}
wd = inotify_add_watch(inotify_fd, "/proc/",IN_ALL_EVENTS);
if (wd==-1) {
perror("inotify_add_watch");
return 1;
}
printf("Map gots descriptor %d\n",wd);
int f;
for (f=0; f<20; f++) {
num=read(inotify_fd, &buffer, sizeof(buffer));
if (num>0) {
dogodek=(struct inotify_event*)buffer;
printf("Access to map with descriptor %d\n", dogodek->wd);
if (dogodek->len>0)
printf("\tevent found: %s\n", dogodek->name);
else
printf("\tevent found in directory!\n");
printf("\tMask of the event %x\n", dogodek->mask);
if (dogodek->mask & IN_ACCESS)
printf("\t\tReading file!\n");
if (dogodek->mask & IN_CREATE)
printf("\t\tCreating file!\n");
if (dogodek->mask & IN_DELETE)
printf("\t\tDeleting file!\n");
if (dogodek->mask & IN_OPEN)
printf("\t\tOpening file!\n");
}
}
inotify_rm_watch(inotify_fd, wd);
return 0;
}
I need example in code not just explation if there is a possibility.
The following applies to Linux (at least):
The status of a process can be found in /proc/[pid]/status.
For a zombie the file /proc/[pid]/cmdline is empty, that is reading from it returns 0 bytes.
For details please see here: http://man7.org/linux/man-pages/man5/proc.5.html
Related
I've read some of the warnings against using the sysctl() call in C, and it seems if I cannot use sysctl() safely, the only other way I can find to make the needed change would be to use soemething like:
system("echo fs.inotify.max_user_watches=NEW_MAX_DIRECTORIES >> /etc/sysctl.conf");
system("sysctl -p");
(of course, this assumes ensuring the binary is running as root. However, I would rather NOT have to shell out using system calls.
Can someone point me in the correct and safe of using sysctl()?
here is a snippet of the code I am using.
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <getopt.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <string.h>
#include <errno.h>
int main ()
{
int ret;
const char *LOGNAME="iNotifyMonitor";
logger(INFO, "================================================");
ret = startDaemon();
daemonRunning = ret;
if (ret == 0)
{
daemonRunning = 1;
FIRST_RUN = 0;
}
if(ret)
{
syslog(LOG_USER | LOG_ERR, "Error starting iNotifyMonitor");
logger(ERR, "Unable to start iNotifyMonitor");
closelog();
return EXIT_FAILURE;
}
signal(SIGINT, signalHandler);
signal(SIGHUP, signalHandler);
char *log_file_name = malloc(sizeof(char *) * sizeof(char *));
sprintf(log_file_name, "%s%s", INM_LOG_DIR, INM_LOG_FILE);
/* Try to open log file to this daemon */
if (INM_OPEN_LOG && INM_LOG_FILE)
{
log_stream = fopen(concatString(INM_LOG_DIR, INM_LOG_FILE), "a+");
if (log_stream == NULL)
{
char *errMsg;
sprintf(errMsg, "Cannot open log file %s, error: %s", concatString(INM_LOG_DIR, INM_LOG_FILE), strerror(errno));
log_stream = stdout;
}
}
else
{
log_stream = stdout;
}
while (daemonRunning == 1)
{
if (ret < 0)
{
logger(LOG_ERR, "Can not write to log stream: %s, error: %s", (log_stream == stdout) ? "stdout" : log_file_name, strerror(errno));
break;
}
ret = fflush(log_stream);
if (ret != 0)
{
logger(LOG_ERR, "Can not fflush() log stream: %s, error: %s",
(log_stream == stdout) ? "stdout" : log_file_name, strerror(errno));
break;
}
int curcount =countDirectory("/home/darrinw/Development/CrossRoads/");
directoryCount = curcount;
if(directoryCounrt > INM_MAX_DIRECTORIES)
{
int newVal = roundUp(directoryCount, 32768);
// call to sysctl() to modify fs.inotify.max_users_watches=newVal
}
sleep(INM_SCAN_INTERVAL);
}
My understanding is that the modern recommended approach to access sysctl variables is via the pseudo-files in /proc/sys. So just open /proc/sys/fs/inotify/max_user_watches and write there.
int fd = open("/proc/sys/fs/inotify/max_user_watches", O_WRONLY);
dprintf(fd, "%d", NEW_MAX_DIRECTORIES);
close(fd);
Error checking left as an exercise.
Modifying /etc/sysctl.conf would make the setting persist across reboots (assuming your distribution uses the file this way, I am not sure if all of them do). That's kind of rude to do automatically; probably better to use the documentation to advise the system administrator to do it themselves if it's needed.
First of all, I don't know if I can explain well my problem or you can get it in the appropriate way. But I will try to make it clear for you.
In fact, I have two different C programs.
The first one is a simple loop print of a message on the console :
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
int main ()
{
while(1)
{
printf("WAITING\n");
sleep(1);
}
}
The second one is a blocking program that waits for an event ( press button ) to turn on led in my embedded board.
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>
#include <sys/select.h>
#include <sys/time.h>
#include <errno.h>
#include <linux/input.h>
#define BTN_FILE_PATH "/dev/input/event0"
#define LED_PATH "/sys/class/leds"
#define green "green"
void change_led_state(char *led_path, int led_value)
{
char lpath[64];
FILE *led_fd;
strncpy(lpath, led_path, sizeof(lpath) - 1);
lpath[sizeof(lpath) - 1] = '\0';
led_fd = fopen(lpath, "w");
if (led_fd == NULL) {
fprintf(stderr, "simplekey: unable to access led\n");
return;
}
fprintf(led_fd, "%d\n", led_value);
fclose(led_fd);
}
void reset_leds(void)
{
change_led_state(LED_PATH "/" green "/brightness", 0);
}
int configure_leds(void)
{
FILE *l_fd;
FILE *r_fd;
char *none_str = "none";
/* Configure leds for hand control */
r_fd = fopen(LED_PATH "/" green "/trigger", "w");
fprintf(r_fd, "%s\n", none_str);
fclose(r_fd);
/* Switch off leds */
reset_leds();
return 0;
}
void eval_keycode(int code)
{
static int green_state = 0;
switch (code) {
case 260:
printf("BTN left pressed\n");
/* figure out red state */
green_state = green_state ? 0 : 1;
change_led_state(LED_PATH "/" green "/brightness", green_state);
break;
}
}
int main(void)
{
int file;
/* how many bytes were read */
size_t rb;
int ret;
int yalv;
/* the events (up to 64 at once) */
struct input_event ev[64];
char *str = BTN_FILE_PATH;
printf("Starting simplekey app\n");
ret = configure_leds();
if (ret < 0)
exit(1);
printf("File Path: %s\n", str);
if((file = open(str, O_RDONLY)) < 0) {
perror("simplekey: File can not open");
exit(1);
}
for (;;) {
/* Blocking read */
rb= read(file, &ev, sizeof(ev));
if (rb < (int) sizeof(struct input_event)) {
perror("simplekey: short read");
exit(1);
}
for (yalv = 0;
yalv < (int) (rb / sizeof(struct input_event));
yalv++) {
if (ev[yalv].type == EV_KEY) {
printf("%ld.%06ld ",
ev[yalv].time.tv_sec,
ev[yalv].time.tv_usec);
printf("type %d code %d value %d\n",
ev[yalv].type,
ev[yalv].code, ev[yalv].value);
/* Change state on button pressed */
if (ev[yalv].value == 0)
eval_keycode(ev[yalv].code);
}
}
}
close(file);
reset_leds();
exit(0);
}
When I execute the second code, the program starts waiting for the event to switch on/off the led.
My question is :
How can I make interaction between the two programs ? I want to execute the firs one --> It starts printing for me " WAITING " until I press the BUTTON --> the LED turn on --> and then it goes back to the first program and re-start printing " WAITING " on the console.
I don't know if I explained well the issue but I hope that you can help me! Thank you.
You need a communication mechanism between your two programs. This is also known als inter-process communication.
Generally, you have several options to achieve this (depending on the operating system you are using, not all of them may be available):
Shared memory / shared files
Message passing (e.g. via sockets)
Pipes
Signals
A helpful introduction can be found here.
I have a linked list with an fd and a string I used to open this file in each entry. I want to open and add files to this list only if this file is not already opened, because I open and parse this files and do not want to do it twice. My idea was to compare the filename with every single name in this list, but my program do it multiple times and one file in Linux can have multiple names (soft/hard links). I think it should not be so complicated, because its easy for the OS to check, whether I already used a inode or not, r?
I already tried to open the same file with and without flock, but I always get a new fd.
When you successfully open a file use fstat on the file. Check to see if the st_ino and st_dev of the struct stat filed in by fstat have already been recorded in your linked list. If so then close the file descriptor and move on to the next file. Otherwise add the file descriptor, the file name and st_ino and st_dev values to the list.
You can instead use stat to check before opening the file, but using fstat after will be slightly faster if the usual case is that file hasn't already been opened.
In situations like this, it's often useful to consider your data structures. Change to a data structure which does not allow duplicates, such as a hash table.
Maintain a set of which data you've seen before. I've used a hash table for this set. As per #RossRidge's answer, use the inode and device as the key. This allows duplicates to be discovered in O(1) time.
Here is an example implementation.
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <glib.h>
#include <sys/stat.h>
#include <errno.h>
#include <fcntl.h>
static int get_fd(GHashTable *fds, const char *filename, int mode) {
int fd;
struct stat stat;
int keysize = 33;
char key[keysize]; /* Two 64 bit numbers as hex and a separator */
/* Resolve any symlinks */
char *real_filename = realpath(filename, NULL);
if( real_filename == NULL ) {
printf("%s could not be resolved.\n", filename);
return -1;
}
/* Open and stat */
fd = open( real_filename, mode );
if( fd < 0 ) {
printf("Could not open %s: %s.\n", real_filename, strerror(errno));
return -1;
}
if( fstat(fd, &stat) != 0 ) {
printf("Could not stat %s: %s.\n", real_filename, strerror(errno));
return -1;
}
/* Make a key for tracking which data we've processed.
This uses both the inode and the device it's on.
It could be done more efficiently as a bit field.
*/
snprintf(key, keysize, "%lx|%lx", (long int)stat.st_ino, (long int)stat.st_dev);
/* See if we've already processed that */
if( g_hash_table_contains(fds, key) ) {
return 0;
}
else {
/* Note that we've processed it */
g_hash_table_add(fds, key);
return fd;
}
}
int main(int argc, char** argv) {
int mode = O_RDONLY;
int fd;
GHashTable *fds = g_hash_table_new(&g_str_hash, &g_str_equal);
for(int i = 1; i < argc; i++) {
char *filename = argv[i];
fd = get_fd(fds, filename, mode);
if( fd == 0 ) {
printf("%s has already been processed.\n", filename);
}
else if( fd < 0 ) {
printf("%s could not be processed.\n", filename);
}
else {
printf("%s: %d\n", filename, fd);
}
}
}
And here's a sample result.
$ touch one two three
$ ln one one_link
$ ln -s two two_sym
$ ./test one* two* three*
one: 3
one_link has already been processed.
two: 5
two_sym has already been processed.
three: 7
As long as you don't close the successfully and intentionally opened files, you can use nonblocking flock to prevent another lock on the same file:
#include <unistd.h>
#include <sys/file.h>
#include <stdio.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <fcntl.h>
#include <assert.h>
int openAndLock(const char* fn){
int fd = -1;
if(((fd = open(fn, O_RDONLY)) >= 0) && (flock(fd, LOCK_EX|LOCK_NB) == 0)){
fprintf(stderr, "Successfully opened and locked %s\n", fn);
return fd;
}else{
fprintf(stderr, "Failed to open or lock %s\n", fn);
close(fd);
return -1;
}
}
int main(int argc, char** argv){
for(int i=1; i<argc; i++){
openAndLock(argv[i]);
}
return 0;
}
Example:
$ touch foo
$ ln foo bar
$ ./a.out foo foo
Successfully opened and locked foo
Failed to open or lock foo
$ ./a.out foo bar
Successfully opened and locked foo
Failed to open or lock bar
I've completed writing of counting words code finally. It counts total number of words in files. (i.e. txt). Now, I want to use multiple fork() to access and read every file. I studied in the last week. Besides, I use global variable to hold number of counted words. As far as I know, If I apply fork(), used global variables are assigned as 0. To avoid it, I tried to use mmap() and similar functions this is okey. But, I also want to use pipe() also (fifo() if it is possible) to communicate (hold values of numbers).
I use nftw() function to go in folders and files. My logic is on the below picture. How can use fork() and pipe() (fifo()) on this code ? fork() is really complicated for me because of my inexperience. I'm new using of pipe() and fork(). According to my idea logic of the code is that if I can use fork() and pipe(), there will be fork() every file(i.e. txt) and access them by using fork. If there is another folder and there are files, again creates fork() from one of created forks , then access file. I try to explain also drawing below. Thank you. I want to learn using of them.
int countInEveryFolder(const char *dir)
is used because I don't know how to count files until the next folder in nftw() function. Number of files is necessary because it is number of fork.
Every folder should be parent of files. The files are included by the folder.
Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <dirent.h>
#include <errno.h>
#include <ftw.h>
#include <ctype.h>
#include <sys/mman.h>
#include <locale.h>
#include <errno.h>
#define MAX_PATH_LEN 2048
unsigned long total_words = 0UL;
unsigned long total_dirs = 0UL;
unsigned long total_files = 0UL;
// Just proves counting number of file in a folder
int countInEveryFolder(const char *dir) {
struct stat stDirInfo;
struct dirent * stFiles;
DIR * stDirIn;
char szFullName[MAX_PATH_LEN];
char szDirectory[MAX_PATH_LEN];
struct stat stFileInfo;
int numOfFile = 0;
strncpy( szDirectory, dir, MAX_PATH_LEN - 1 );
if (lstat( szDirectory, &stDirInfo) < 0)
{
perror (szDirectory);
return 0;
}
if (!S_ISDIR(stDirInfo.st_mode))
return 0;
if ((stDirIn = opendir( szDirectory)) == NULL)
{
perror( szDirectory );
return 0;
}
while (( stFiles = readdir(stDirIn)) != NULL)
{
if (!strcmp(stFiles->d_name, ".") || !strcmp(stFiles->d_name, ".."))
continue;
sprintf(szFullName, "%s/%s", szDirectory, stFiles -> d_name );
if (lstat(szFullName, &stFileInfo) < 0)
perror ( szFullName );
/* is the file a directory? */
if (S_ISREG(stFileInfo.st_mode))
{
printf( "Filename: %s\n", szFullName );
numOfFile++;
}
} // end while
closedir(stDirIn);
return numOfFile;
}
// Count words in files.
unsigned long count_words_in_file(const char *const filename)
{
unsigned long count = 0UL;
int errnum = 0;
int c;
FILE *in;
in = fopen(filename, "rt");
if (in == NULL) {
errnum = errno;
fprintf(stderr, "%s: %s.\n", filename, strerror(errnum));
errno = errnum;
return 0UL;
}
/* Skip leading whitespace. */
do {
c = getc(in);
} while (isspace(c));
/* Token loop. */
while (c != EOF) {
/* This token is a word, if it starts with a letter. */
if (isalpha(c))
count++;
/* Skip the rest of this token. */
while (!isspace(c) && c != EOF)
c = getc(in);
/* Skip the trailing whitespace. */
while (isspace(c))
c = getc(in);
}
/* Paranoid checking for I/O errors. */
if (!feof(in) || ferror(in)) {
fclose(in);
fprintf(stderr, "Warning: %s: %s.\n", filename, strerror(EIO));
errnum = EIO;
} else
if (fclose(in)) {
fprintf(stderr, "Warning: %s: %s.\n", filename, strerror(EIO));
errnum = EIO;
}
errno = errnum;
return count;
}
// Recursively go in folders
int nftw_callback(const char *filepath, const struct stat *sb, int typeflag, struct FTW *ftwbuf)
{
// Directory
if (typeflag == FTW_DP || typeflag == FTW_D)
{
total_dirs++;
printf("%*s%s\n", ftwbuf->level * 4, "", filepath);
//countInEveryFolder(filepath);
}
// Folder
else if (typeflag == FTW_F)
{
total_files++;
total_words += count_words_in_file(filepath);
printf("%*s%s\n", ftwbuf->level * 4, "", filepath);
}
return 0;
}
/* Error message */
void err_sys(const char *msg)
{
perror(msg);
fflush(stdout);
exit(EXIT_FAILURE);
}
int main(int argc, char *argv[])
{
total_files = total_dirs = total_words = 0UL;
if (nftw(argv[1], nftw_callback, 15, FTW_PHYS) == 0) {
/* Success! */
printf("%s: %lu files, %lu directories, %lu words total.\n",
argv[1], total_files, total_dirs, total_words);
} else {
/* Failed... */
err_sys("ntfw");
}
putchar('\n');
//printf( "\nTotal words = %d\n\n", *wordCount);
//printf( "\nTotal folders = %d\n\n", *folderCount);
//printf( "\nTotal childs = %d\n\n", *childCount); //fork()
return 0;
}
To start I would write the program with two phases. A single-process phase in which all the file-paths are queued up (into a linked-list or dequeue), and a multi-process phase in which the worker processes receive work via their pipe() and send counts back to the main process via their pipe(). The main process would use select() to multiplex the input from its children.
Once you understand how to use select() with pipe()s, then work on having the filepath discovery be concurrent.
This design would be much easier to implement in Go, node.js, or greenlet with Python, but learning how to do it in C gives you a level of understanding for the underlying operations that you don't get with newer languages.
I am learning "Advanced Programming in Unix Environment", and have a problem with exercise no.11 in chapter 10.
In my program, I set RLIMIT_FSIZE to 1024.
So the kernel should send SIGXFSZ to my program when write trying to exceed that limit.
But I found that SIGXFSZ is not send unless something is printed to stdout.
Here is my code:
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <signal.h>
#define BUFFSIZE 100
void xfsz_handler(int signo)
{
fprintf(stderr, "%d, %s\n", signo, strsignal(signo));
}
int main(int argc, char* argv[])
{
int n;
char buf[BUFFSIZE];
struct rlimit fsizeLimit;
fsizeLimit.rlim_cur=1024;
fsizeLimit.rlim_max=1024;
if(setrlimit(RLIMIT_FSIZE, &fsizeLimit) < 0)
{
perror("setrlimit error");
exit(-1);
}
if(signal(SIGXFSZ, xfsz_handler)==SIG_ERR)
{
fprintf(stderr, "set signal handler error for %d\n", SIGXFSZ);
exit(-1);
}
printf("what ever\n"); /* we need this to get SIGXFSZ sent */
while ( (n=read(STDIN_FILENO, buf, BUFFSIZE)) > 0)
{
int byteWrite = 0;
if ( (byteWrite = write(STDOUT_FILENO, buf, n)) < 0)
{
perror("write error");
exit(-1);
}
if(byteWrite!=n)
{
fprintf(stderr, "byteWrite=%d, n=%d\n", byteWrite, n);
exit(-1);
}
}
if (n<0)
{
perror("read error");
exit(-1);
}
return 0;
}
if I comment out the following line in the code, kernel will not transmit SIGXFSZ.
printf("What ever . . . \n");
Why this happens? Thanks in advance.
[root#luaDevelopment ex11]# ./myCopy < /root/workspace/AdvanceProgrammingInTheUnixEnvironment.20140627.tar.bz2 >aa.tar.bz2
byteWrite=24, n=100
[root#luaDevelopment ex11]# make
gcc -o myCopy myCopy.c -std=gnu99 -I../../lib/ -L../../lib/ -lch10
[root#luaDevelopment ex11]# ./myCopy < /root/workspace/AdvanceProgrammingInTheUnixEnvironment.20140627.tar.bz2 >aa.tar.bz2
byteWrite=24, n=100
25, File size limit exceeded
[root#luaDevelopment ex11]#
user3693690 found the answer in Appendix C of the book:
10.11 Under Linux 3.2.0, Mac OS X 10.6.8, and Solaris 10, the signal handler for SIGXFSZ is never called because the loop exits the program on a short write, but write returns a count of 24 as soon as the file’s size reaches 1,024 bytes. When the file’s size has reached 1,000 bytes under FreeBSD 8.0, the signal handler is called on the next attempt to write 100 bytes, and the write call returns −1 with errno set to EFBIG("File too big"). On all four platforms, if we attempt an additional write at the current file offset (the end of the file), we will receive SIGXFSZ and write will fail, returning −1 with errno set to EFBIG.