I was given some lengthy code that in essence builds a long string and was tasked with being able to get this long string sent via t-sql email. The code is over 1300 lines long and they don't want me to rewrite the code. I was able to convince them to let me turn it into a stored procedure which I did and that works fine.
My question is, is there a way to capture the "Message" tab results and send them out via the sp_send_email stored procedure?
So if, for example, the message tab says:
DB Instance: SqlSvrName\Instance
Timestamp: Apr 7 2015 2:21PM
QATech: DomainName\Name
CLAIMS TASKS CLEAN UP
1.0 Delete Duplicated Tasks
Claims Tasks That Have Duplicates
1 Claims Have Duplicated Tasks
1.1 Duplicate Removal 1
0 Tasks Deleted
1.1 Duplicate Removal 1 Complete
1.2 Duplicate Removal 2
0 Tasks Deleted
1.2 Duplicate Removal 2 Complete
1.3 Duplicate Removal 3
0 Tasks Deleted
1.3 Duplicate Removal 3 Complete
Set up your stored procedure to use #MR as an OUTPUT parameter
Related
Summary
I have a database of ~1500 entries. Some of them have more than one entry (up to 5) under the same identifier. I have a pre-set list of IDs I would like to check to see if they have multiple records, and if so, pull all of them, so I can compare them for differences.
Current solution
I currently have this working correctly, using a method to pull the 1st, 2nd, 3rd, 4th and 5th response respectively. The current formula is:
=INDEX('DATABASE'!$B:$B,SMALL(IF($A2='DATABASE'!$A:$A,ROW('DATABASE'!$A:$A)-ROW('DATABASE'!$A$1)+1),1)) for the 1st result, =INDEX('DATABASE'!$B:$B,SMALL(IF($A2='DATABASE'!$A:$A,ROW('DATABASE'!$A:$A)-ROW('DATABASE'!$A$1)+1),2)) for the second, and so on. In this case, the above code would check the value in A2 (ID2Check), and then do a match for it on the 'DATABASE' sheet in column A. If it matches, it will return the first value that matches from column B. The second piece of code above does the same, except it returns the second match from column B. ID2Check is populated by me, and the Results 1-5 are the code output. For example:
Database:
ID
Data Item
AAA
Lemons
111
Greenhouse
FOO
Computer
AAA
Monitor
CAT
Coffee
ORANGE
Pintglass
123
Birthday
FOO
Avengers
AAA
Plasters
FOO
NachoTaco
Code output:
ID2Check
Result 1
Result 2
Result 3
Result 4
Result 5
AAA
Lemons
Monitor
123
Birthday
FOO
Computer
Avengers
NachoTaco
Problem
This solution works correctly, and will pull the expected values as required. The problem is, as this code needs to be entered 5 times per identifier, and there are ~1500 records to check, I need to flash fill 7500 formulas. Unsurprisingly, this leads to Excel crashing and becoming unresponsive for the best part of 30 minutes. I am looking to find a solution that would be more efficient and stable when running en-mass. Any assistance would be appreciated.
Final Notes / Info
I'm using MSO 365, version 2202 (I cannot update beyond this). This will be run in the Desktop version of Excel. I would prefer this is done exclusively using formulas, but I am open to using Visual Basic if it would be otherwise impossible or incredibly inefficient.
=UNIQUE(C5:C15)
=TRANSPOSE(FILTER($D$5:$D$15;$C$5:$C$15=F5))
If you have access to HSTACK() function then could try-
=HSTACK(UNIQUE(A2:A11),TEXTSPLIT(TEXTJOIN("/",FALSE,BYROW(UNIQUE(A2:A11),LAMBDA(x,TEXTJOIN("|",TRUE,FILTER(B2:B11,A2:A11=x))))),"|","/",,,""))
In the sample case on the Kylin official website, when I was building cube, in the first step of the Create Intermediate Flat Hive Table, the log is always No Data Available, the status is always running.
The cube build has been executed for more than three hours.
I checked the hive database table kylin_sales and there is data in the table.
And I fount that the intermediate flat hive table kylin_intermediate_kylin_sales_cube_402e3eaa_dfb2_7e3e_04f3_07248c04c10c
has been created successfully in the hive, but there is no data in its.
hive> show tables;
OK
...
kylin_intermediate_kylin_sales_cube_402e3eaa_dfb2_7e3e_04f3_07248c04c10c
kylin_sales
...
Time taken: 9.816 seconds, Fetched: 10000 row(s)
hive> select * from kylin_sales;
OK
...
8992 2012-04-17 ABIN 15687 0 13 95.5336 17 10000975 10000507 ADMIN Shanghai
8993 2013-02-02 FP-non GTC 67698 0 13 85.7528 6 10000856 10004882 MODELER Hongkong
...
Time taken: 3.759 seconds, Fetched: 10000 row(s)
The deploy environment is as follows:
zookeeper-3.4.14
hadoop-3.2.0
hbase-1.4.9
apache-hive-2.3.4-bin
apache-kylin-2.6.1-bin-hbase1x
openssh5.3
jdk1.8.0_144
I deployed the cluster through docker and created 3 containers, one master, two slaves.
Create Intermediate Flat Hive Table step is running.
No Data Available means this step's log has not been captured by Kylin. Usually only when the step is exited (success or failed), the log will be recorded, then you will see the data.
For this case, usually, it indicates the job was pending by Hive, due to many reasons. The simplest way is, watch Kylin's log, you will see the Hive CMD that Kylin executes, and then you can run it manually in console, then you will reproduce the problem. Please check if your Hive/Hadoop has enough resource (cpu, memory) to execute such a query.
I have SQL Server 2012 and I want to know what's the usage of sequence. I Look for a sample to explain usage of sequence.
EDIT
I know create and use Sequence in database. I want to know what is practical scenario for use of Sequence.
CREATE SEQUENCE dbo.OrderIDs
AS INT
MINVALUE 1
NO MAXVALUE
START WITH 1;
SELECT NextOrderID = NEXT VALUE FOR dbo.OrderIDs
UNION ALL SELECT NEXT VALUE FOR dbo.OrderIDs
UNION ALL SELECT NEXT VALUE FOR dbo.OrderIDs;
Results:
NextOrderID
-----------
1
2
3
See here for original source and more examples. The page refers to SQL Server Denali which is the beta of SQL 2012 but the syntax is still the same.
One of the ways I leverage the SEQUENCE command is for reference numbers in an ASP/C# detailsview page (as an example). I use the detailsview to enter requests into a database and the SEQUENCE command serves as the request/ticket number for each request. I set the inital sequence command to start with a specific number and increment by 1 for each request.
If I present these requests in a gridview I make the SEQUENCE reference numbers appear but don't make them editable. Its great for a reference number when records are similar with other fields in the database. It's also perfect for customers when they have questions about a specific entry in a given database. This way I have a unique number per entry no matter if the rest of the information is identical or not.
Here's how I generally leverage the SEQUENCE command:
CREATE SEQUENCE blah.deblah
START WITH 1
INCREMENT BY 1
NO CYCLE
NO CACHE
In short, I start my sequence at #1 (you can choose any number you want to start with) and it counts upwards in increments of 1. I don't cycle the sequence numbers when they reach the system max number.
I have a dataset that has patient data according to the site they visited our mobile clinic. I have now written up a series of commands such as freqs and crosstabs to produce the analyses I need, however I would like this to be done for patients at each site, rather than the dataset as whole.
If I had only one site, a mere filter command with the variable that specifies a patient's site would suffice, but alas I have 19 sites, so I would like to find a way to loop through my code to produce these outputs for each site. That is to say for i in 1 to 19:
1. Take the i th site
2. Compute a filter for this i th site
3. Run the tables using this filtered data of patients at ith site
Here is my first attempt using DO REPEA. I also tried using LOOP earler.
However it does not work I keep getting an error even though these are closed loops.
Is there a way to do this in SPSS syntax? Bear in mind I do not know Python well enough to do this using that plugin.
*LOOP #ind= 1 TO 19 BY 1.
DO REPEAT #ind= 1 TO 20.
****8888888888888888888888888888888888888888888888888888888 Select the Site here.
COMPUTE filter_site=(RCDSITE=#ind).
USE ALL.
FILTER BY filter_site.
**********************Step 3: Apply the necessary code for tables
*********Participation in the wellness screening, we actually do not care about those who did FP as we are not reporting it.
COUNT BIO= CheckB (1).
* COUNT FPS=CheckF(1).
* COUNT BnF= CheckB CheckF(1).
VAL LABEL BIO
1 ' Has the Wellness screening'
0 'Does not have the wellness screening'.
*VAL LABEL FPS
1 'Has the First patient survey'.
* VAL LABEL BnF
1 'Has either Wellness or FPS'
2 'Has both surveys done'.
FREQ BIO.
*************************Use simple math to calcuate those who only did the Wellness/First Patient survey FUB= F+B -FnB.
*******************************************************Executive Summary.
***********Blood Pressure.
FREQ BP.
*******************BMI.
FREQ BMI.
******************Waist Circumference.
FREQ OBESITY.
******************Glucose.
FREQ GLUCOSE.
*******************Cholesterol.
FREQ TC.
************************ Heamoglobin.
FREQ HAEMOGLOBIN.
*********************HIV.
FREQ HIV.
******************************************************************************I Lifestyle and General Health.
MISSING VALUES Gender GroupDep B8 to B13 ('').
******************Graphs 3.1
Is this just Frequencies you are producing? Try the SPLIT procedure by the variable RCDSITE. Should be enough.
SPLIT FILES allows you to partition your data by up to eight variables. Then each procedure will automatically iterate over each group.
If you need to group the results at a higher level than the procedure, that is, to run a bunch of procedures for each group before moving on to the next one so that all the output for a group will be together, you can use the SPSSINC SPLIT DATASET and SPSSINC PROCESS files extension commands to do this.
These commands require the Python Essentials. That and the commands can be downloaded from the SPSS Community website (www.ibm.com/developerworks/spssdevcentral) if you have at least version 18.
HTH,
Jon Peck
A simple but perhaps not very elegant way is to select from the menu: Data/Select Cases/If condition, there you enter the filter for site 1 and press Paste, not OK.
This will give the used filter as syntax code.
So with some copy/paste/replace/repeat you can get the freqs and all other results based on the different sites.
I was wondering what is a viable database solution for local storage on Windows Phone 7 right now. Using search I stumbled upon these 2 threads but they are over a few months old. I was wondering if there are some new development in databases for WP7. And I didn't found any reviews about the databases mentioned in the links below.
windows phone 7 database
Local Sql database support for Windows phone 7
My requirements are:
It should be free for commercial use
Saving/updating a record should only save the actual record and not the entire database (unlike WinPhone7 DB)
Able to fast query on a table with ~1000 records using LINQ.
Should also work in simulator
EDIT:
Just tried Sterling using a simple test app: It looks good, but I have 2 issues.
Creating 1000 records takes 30 seconds using db.Save(myPerson). Person is a simple class with 5 properties.
Then I discovered there is a db.SaveAsync<Person>(IList) method. This is fine because it doesn't block the current thread anymore.
BUT my question is: Is it save to call db.Flush() immediately and do a query on the currently saving IList? (because it takes up to 30 seconds to save the records in synchronous mode). Or do I have to wait until the BackgroundWorker has finished saving?
Query these 1000 records with LINQ and a where clause the first time takes up to 14 sec to load into memory.
Is there a way to speed this up?
Here are some benchmark results: (Unit tests was executed on a HTC Trophy)
-----------------------------
purging: 7,59 sec
creating 1000 records: 0,006 sec
saving 1000 records: 32,374 sec
flushing 1000 records: 0,07 sec
-----------------------------
//async
creating 1000 records: 0,04 sec
saving 1000 records: 0,004 sec
flushing 1000 records: 0 sec
-----------------------------
//get all keys
persons list count = 1000 (0,007)
-----------------------------
//get all persons with a where clause
persons list with query count = 26 (14,241)
-----------------------------
//update 1 property of 1 record + save
persons list with query count = 26 (0,003s)
db saved (0,072s)
You might want to take a look at Sterling - it should address most of your concerns and is very flexible.
http://sterling.codeplex.com/
(Full disclosure: my project)
try Siaqodb is commercial project and as difference from Sterling, not serialize objects and keep all in memory for query.Siaqodb can be queried by LINQ provider which efficiently can pull from database even only fields values without create any objects in memory, or load/construct only objects that was requested.
Perst is free for non-commercial use.
You might also want to try Ninja Database Pro. It looks like it has more features than Sterling.
http://www.kellermansoftware.com/p-43-ninja-database-pro.aspx